Date: 2005-08-08
Volkswagen Group of America, Inc.
NHTSA Action Number: DP05003
Components: STEERING:LINKAGES:TIE ROD ASSEMBLY
Subject: ALLEGED PREMATURE TIE ROD FAILURE
Opened From: 2005-08-08 - 2005-12-09
Summary
ON AUGUST 2, 2005, ODI RECEIVED A PETITION SUBMITTED BY MS. MIRIAM SCHNEIDER OF OLNEY, MD, REQUESTING AN INVESTIGATION OF ALLEGEDLY DEFECTIVE TIE RODS IN CERTAIN MODEL YEAR (MY) 1999 VOLKSWAGEN PASSAT VEHICLES NOT INCLUDED IN TWO PREVIOUS SAFETY RECALL CAMPAIGNS (IDENTIFIED HENCEFORTH AS THE SUBJECT VEHICLES).IN A SEPTEMBER 1999 LETTER, VOLKSWAGEN OF AMERICA, INC. (VW) NOTIFIED THE AGENCY THAT AN UNDETERMINED PERCENTAGE OF MY 1998-1999 VOLKSWAGEN PASSAT AND AUDI A4, A6, AND A8 VEHICLES CONTAINED A SAFETY-RELATED DEFECT AFFECTING ALUMINUM TIE ROD ENDS IN THE STEERING SYSTEM.VW INDICATED THAT IT WAS POSSIBLE THAT SOME TIE RODS WOULD NOT SEAL PROPERLY WHICH COULD ALLOW MOISTURE AND DUST PARTICLES TO ENTER THE SWIVEL BEARING MECHANISM, RESULTING IN PREMATURE WEAR.THE APPROXIMATELY 22,200 VOLKSWAGEN AND 29,700 AUDI VEHICLES AFFECTED BY THIS RECALL (IDENTIFIED BY NHTSA RECALL NO. 99V-248) WERE BUILT FROM JANUARY 1998 THROUGH JULY 1998 AND FELL WITHIN A SPECIFIC VEHICLE IDENTIFICATION NUMBER (VIN) RANGE.IN NOVEMBER 2000, VW CHOSE TO EXPAND THE SCOPE OF THE RECALL (IDENTIFIED BY NHTSA RECALL NO. 00V-414) AFTER IT DETERMINED THAT SOME POTENTIALLY DEFECTIVE ALUMINUM TIE ROD ENDS MAY HAVE BEEN INSTALLED IN AN ADDITIONAL 44,000 VOLKSWAGEN AND 39,000 AUDI VEHICLES BUILT FROM AUGUST 1998 THROUGH APRIL 1999.THESE SUBJECT RECALL ACTIONS WERE NOT INFLUENCED BY ODI.INSTEAD, VW MADE AN INDEPENDENT DETERMINATION TO CONDUCT A RECALL AFTER GERMAN VEHICLE INSPECTION AUTHORITIES NOTIFIED IT OF ?WORN? TIE RODS AND FACTORY INSPECTION OF SOME ?WORN? TIE RODS REVEALED IMPROPER SEALING.ACCORDING TO A DECEMBER 2004 REPORT, THE PETITIONER BROUGHT HER MY 1999 PASSAT TO AN AUTHORIZED VOLKSWAGEN DEALER FOR AN UNRELATED RECALL REPAIR WHERE SHE WAS NOTIFIED BY SERVICE PERSONNEL THAT, AFTER 59,000 MILES TRAVELED, THE TIE RODS ?HAVE TOO MUCH PLAY,? AND THE RECOMMENDED REPAIRS WOULD NOT BE COVERED FREE OF CHARGE BECAUSE HER VIN (WVWNA63B1XE499116) WAS OUTSIDE THE RECALL RANGE.IN JUNE 2005, AFTER 65,400 MILES TRAVELED, THE PETITIONER PAID $588.59 TO REPLACE WORN INNER AND OUTER TIE ROD ENDS ON BOTH SIDES OF THE VEHICLE.THE PETITION LETTER SPECIFICALLY REQUESTS THAT THE SCOPE OF VW?S RECALL BE EXPANDED TO INCLUDE THE PETITIONER?S VEHICLE AND THAT SHE BE REIMBURSED FOR THE COST OF THE REPAIRS.THERE ARE A TOTAL OF 191 NON-DUPLICATIVE COMPLAINTS TO ODI AND VW THAT ALLEGE PREMATURE WEAR OF EITHER ONE OR BOTH OUTER TIE ROD ENDS IN THE SUBJECT VEHICLES.AS OF NOVEMBER 18, 2005, ODI IS NOT AWARE OF ANY ALLEGATIONS OF TIE ROD SEPARATIONS RESULTING IN A LOSS OF VEHICLE CONTROL, CRASH OR INJURY IN THE SUBJECT VEHICLES.THE PETITIONER?S VEHICLE WAS MANUFACTURED ON JUNE 8, 1999 USING REVISED STEEL TIE ROD ENDS AND THEREFORE WAS ALREADY EQUIPPED WITH THE TIE ROD ENDS USED TO REMEDY DEFECTIVE VEHICLES IN THE SUBJECT RECALLS.ANALYSIS INDICATES THAT THERE DOES NOT APPEAR TO BE A SAFETY-RELATED DEFECT TREND WITH RESPECT TO THE STEEL TIE ROD ENDS USED IN THE SUBJECT VEHICLES.IN VIEW OF THE FOREGOING, IT IS UNLIKELY THAT NHTSA WOULD ISSUE AN ORDER FOR THE NOTIFICATION AND REMEDY OF THE ALLEGED DEFECT AS DEFINED BY THE PETITIONER AT THE CONCLUSION OF THE INVESTIGATION REQUESTED IN THE PETITION.THEREFORE, IN VIEW OF THE NEED TO ALLOCATE AND PRIORITIZE NHTSA?S LIMITED RESOURCES TO BEST ACCOMPLISH THE AGENCY?S SAFETY MISSION, THE PETITION IS DENIED.
Investigation Documents
For Latest Documents related to this Investigation, visit the NHTSA Website.
Click the (+) Plus Sign
Then click Associated Document(s).
- 【Designed for Most Mercedes-Benz, Sprinter and Smart from...
- 【38+ Reset Services】MB V3.0 2026 Version diagnostic tool...
- 【OE-Level All System OBD2 Scanner】iCarsoft MB V...
- 【Bidirectional Scan Tool】iCarsoft MB V3.0 (2026 Version...
- 【Real Time Record & Graph View】iCarsoft MB V...
Search NHTSA Database for Recalls
Search NHTSA Database for (TSB's) Technical Service Bulletins
Technical Service Bulletins TSB's List
Previous Investigation | Next Investigation |
- CEL Doctor: The ANCEL AD310 is one of the best-selling OBD II scanners on the market and is recommended by Scotty Kilmer, a YouTuber and auto mechanic. It can easily determine the cause of the check engine light coming on. After repairing the vehicle's problems, it can quickly read and clear diagnostic trouble codes of emission system, read live data & hard memory data, view freeze frame, I/M monitor readiness and collect vehicle information.
- Sturdy and Compact: Equipped with a 2.5 foot cable made of very thick, flexible insulation. It is important to have a sturdy scanner as it can easily fall to the ground when working in a car. The AD310 OBD2 scanner is a well-constructed mechanic tool with a sleek design. It weighs 12 ounces and measures 8.9 x 6.9 x 1.4 inches. Thanks to its compact design and light weight, transporting the device is not a problem. The buttons are clearly labelled and the screen is large and displays results clearly.
- Accurate Fast and Easy to Use: The AD310 scanner can help you or your mechanic understand if your car is in good condition, provides exceptionally accurate and fast results, reads and clears engine trouble emission codes in seconds after you fixed the problem. This device will let you know immediately and fix the problem right away without any car knowledge. No need for batteries or a charger, get power directly from the OBDII Data Link Connector in your vehicle.
- OBDII Protocols and Car Compatibility: Many cheap scan tools do not really support all OBD2 protocols. AD310 scanner as it can support all OBDII protocols such as KWP2000, J1850 VPW, ISO9141, J1850 PWM and CAN. This device also has extensive vehicle compatibility with 1996 US-based, 2000 EU-based and Asian cars, light trucks, SUVs, as well as newer OBD2 and CAN vehicles both domestic and foreign. Pls confirm with our customer service whether it is compatible with your vehicle before purchasing.
- Home Necessity and Worthy to Own: This is an excellent code reader to travel or home with as it weighs less and it is compact in design. You can easily slide it in your backpack as you head to the garage, or put it on the dashboard, this will be a great fit for you. The AD310 is not only portable, but also accurate and fast in performance. Moreover, it covers various car brands and is suitable for people who just need a code reader to check their car.
- Multi-Functions - Practical Multi-Functions OBD2 code reader features built-in OBD2 DTC lookup library, which help you to determine the cause of the engine light, read code, erase code, view freeze frame, I/M ready, vehicle information, data flow, real-time curve, get vehicle speed information, calculate load value, engine coolant temperature, get engine speed.
- Wide Capability - Supports 9 protocols compatible with most 1996 US-Based, 2000 EU-Based and Asian cars, and newer OBD II & CAN domestic or import vehicles. Supports 6 languages - English,German, Dutch, Spanish, French, Italian.
- 2.8" LCD Display - Designed with a clear display 2.8" Large LCD screen - white backlight and contrast adjustment. No need any battery or charger, OBD reader gets the power directly from your vehicle through the OBDII Data Link Connector.
- Compact Design - Car diagnostic scanner is equipped with a 2.5 feet long cable and made of a very thick flexible insulator.There are 6 buttons on OBD2 Scanner:scroll up/down,enter/exit and buttons that quick query VIN vehicle number& the DTC fault code.
- ABS / Airbag codes NOT Supported - It is able to read and clear check engine information which is part of OBDII system, but it cannot work with non-OBDII systems, including ABS / Airbag / Oil Service Light, etc.
- 【Your Personal CEL Doctor – Read & Clear Engine Codes】The NT301 OBD2 scanner lets you read diagnostic trouble codes (DTCs), check em-issions readiness, turn off your Check Engine Light (CEL) or MIL, reset monitors, and view live data streams. It retrieves your vehicle's VIN instantly. Like all standard OBD2 scanners, it clears codes only after repairs are completed—if the issue persists, the code will return. Designed for DIYers who want to understand what’s really going on under the hood.
- 【Easy Code Reading – Just Plug & Play】Simply plug into the OBD2 port, turn the ignition to “ON” (engine off), and select the correct menu: Select OBDII-> Wait for seconds-> Select Read codes. For accurate results, ensure your vehicle is compatible and the OBD2 port is free from damage or wiring issues. No batteries needed— powered directly by your car.
- 【Live Data Graphing & Accuracy for Most OBD2 Vehicles】View and log live sensor data in graph form—monitor oxygen sensors, fuel trims, coolant temp, RPM, and more. Spot trends and suspicious values in real time. Compatible with most 1996+ gasoline cars, light trucks, and SUVs sold in the U.S., as well as many 2000+ European and Asian models. Also works on 12V diesel vehicles equipped with OBD2.
- 【S-mog Check Helper – Know Your Readiness Status at a Glance】With dedicated I/M readiness hotkeys and a simple Red-Yellow-Green LED indicator, you’ll instantly know if your vehicle is ready for em-issions testing. Built-in speaker provides audio feedback. No guesswork—just confidence before you head to the test center.
- 【A Must-Have Tool for Every Home Mechanic】Compact, rugged, and ready to use right out of the box. The 2.8” color screen is easy to read, even in daylight. No charging or setup required—just plug into the 16-pin DLC and start diagnosing. Recommended by professional mechanics on YouTube and trusted by DIYers worldwide.
Last update on 2026-03-25 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.