Date: 2011-05-04
BMW of North America, LLC
NHTSA Action Number: EA11005
Components: STEERING
Subject: Loss of power steering assist
Opened From: 2011-05-04 - 2016-01-05
NHTSA Recall Number: 15V660
Summary
The Office of Defects Investigation (ODI) originally opened the investigation of loss of power steering assist in model year (MY) 2004 and 2005 Mini Cooper as Preliminary Evaluation PE10-038.The investigation was upgraded to Engineering Analysis EA11-005 in May, 2011.During EA11-005 the scope was expanded to include MY 2002 and 2003 vehicles that use the same steering system.The subject vehicles now include MY 2002, the first year BMW sold MINI in the U.S., through mid-MY 2005 covering approximately 109,000 vehicles.The subject vehicles use an electrically driven pump to provide hydraulic pressure to a conventional rack-and-pinion steering gear.A pump, the electric motor, and an electronic control unit (ECU) are housed in a single component BMW calls a Power Pack.The investigation focused on contaminant-induced failure of the ECU resulting in a loss of assist without warning.When assist is lost mechanical steering is retained however increased steering effort is required to keep the vehicle on an intended path.Some consumers reported that restarting the vehicle (cycling the ignition switch) would often reinstate the steering assist.Additionally, and by design, assist can also reinstate during the drive cycle in limited circumstances.The unexpected loss of assist, and/or possibly the reinstatement of assist while driving, may contribute to a loss of vehicle control in certain driving situations.During MY 2005 production BMW introduced a revised Power Pack design (the ECU incorporated a conformal coating of the circuit board) which resulted in a significant reduction in failures.ODI identified 20 reports describing crashes consistent with a loss of power assist event possibly caused by a failure of the Power Pack.Two reports alleged an injury however both were minor in nature and did not require emergency treatment (a subsequent doctor's visit occurred in one case).Ten of these reports described low speed crashes with minimal, or in most cases no property or vehicle damage (e.g., striking a movable barrier in a parking lot).Additionally 27 other reports alleged or indicated that a crash occurred due to a Power Pack failure however in reviewing these reports, ODI either 1) was unable to confirm that a crash actually occurred (8 reports), or 2) determined that the crash circumstances (e.g., adverse road/weather conditions) or cause (e.g., the crash was caused by steering linkage failure) were not attributable to a Power Pack failure (19 reports).Throughout the investigation BMW maintained that loss of assist in the subject vehicles did not constitute a safety related defect, noting that the subject vehicles are smaller, light weight vehicles that can be reasonably controlled when assist is lost.In May 2013 BMW launched a 13 year/150,000 mile extended warranty coverage utilizing the redesigned Power Pack as a replacement part.ODI continued its investigation.In July 2014 BMW provided ODI a status of the ongoing extended warranty program, and in May 2015 ODI requested an update of complaint data.Following a review of the provided data, ODI informed BMW of its assessment that loss of steering assist failures were not adequately resolved by an extended warranty program.On October 12, 2015 BMW notified NHTSA that it would conduct a safety recall (15V-660) on approximately 86,000 subject vehicles not previously remedied with the new design Power Pack through regular or extended warranty programs.The recall covers MY 2002-2005 MINI Cooper, MY 2002-2005 MINI Cooper S, and MY 2005 MINI Cooper/Cooper S convertibles manufactured through Feb 9, 2005.Vehicles produced after this date are not included si
Investigation Documents
For Latest Documents related to this Investigation, visit the NHTSA Website.
Click the (+) Plus Sign
Then click Associated Document(s).
- Advanced VCI Box, Industry-leading J2534 Pass-Thru...
- High-Speed OEM-Level Diagnostics & Programming: Unlock true...
- Coverage for 17 Car Brands & Ultra Reliability: Works...
- User-Friendly RLink Platform & Expert Support: TOPDON’s...
- 6.6 ft USB-C Cable & Portable Storage Case: The RLink J...
Search NHTSA Database for Recalls
Search NHTSA Database for (TSB's) Technical Service Bulletins
Technical Service Bulletins TSB's List
Previous Investigation | Next Investigation |
- CEL Doctor: The ANCEL AD310 is one of the best-selling OBD II scanners on the market and is recommended by Scotty Kilmer, a YouTuber and auto mechanic. It can easily determine the cause of the check engine light coming on. After repairing the vehicle's problems, it can quickly read and clear diagnostic trouble codes of emission system, read live data & hard memory data, view freeze frame, I/M monitor readiness and collect vehicle information.
- Sturdy and Compact: Equipped with a 2.5 foot cable made of very thick, flexible insulation. It is important to have a sturdy scanner as it can easily fall to the ground when working in a car. The AD310 OBD2 scanner is a well-constructed mechanic tool with a sleek design. It weighs 12 ounces and measures 8.9 x 6.9 x 1.4 inches. Thanks to its compact design and light weight, transporting the device is not a problem. The buttons are clearly labelled and the screen is large and displays results clearly.
- Accurate Fast and Easy to Use: The AD310 scanner can help you or your mechanic understand if your car is in good condition, provides exceptionally accurate and fast results, reads and clears engine trouble emission codes in seconds after you fixed the problem. This device will let you know immediately and fix the problem right away without any car knowledge. No need for batteries or a charger, get power directly from the OBDII Data Link Connector in your vehicle.
- OBDII Protocols and Car Compatibility: Many cheap scan tools do not really support all OBD2 protocols. AD310 scanner as it can support all OBDII protocols such as KWP2000, J1850 VPW, ISO9141, J1850 PWM and CAN. This device also has extensive vehicle compatibility with 1996 US-based, 2000 EU-based and Asian cars, light trucks, SUVs, as well as newer OBD2 and CAN vehicles both domestic and foreign. Pls confirm with our customer service whether it is compatible with your vehicle before purchasing.
- Home Necessity and Worthy to Own: This is an excellent code reader to travel or home with as it weighs less and it is compact in design. You can easily slide it in your backpack as you head to the garage, or put it on the dashboard, this will be a great fit for you. The AD310 is not only portable, but also accurate and fast in performance. Moreover, it covers various car brands and is suitable for people who just need a code reader to check their car.
- Multi-Functions - Practical Multi-Functions OBD2 code reader features built-in OBD2 DTC lookup library, which help you to determine the cause of the engine light, read code, erase code, view freeze frame, I/M ready, vehicle information, data flow, real-time curve, get vehicle speed information, calculate load value, engine coolant temperature, get engine speed.
- Wide Capability - Supports 9 protocols compatible with most 1996 US-Based, 2000 EU-Based and Asian cars, and newer OBD II & CAN domestic or import vehicles. Supports 6 languages - English,German, Dutch, Spanish, French, Italian.
- 2.8" LCD Display - Designed with a clear display 2.8" Large LCD screen - white backlight and contrast adjustment. No need any battery or charger, OBD reader gets the power directly from your vehicle through the OBDII Data Link Connector.
- Compact Design - Car diagnostic scanner is equipped with a 2.5 feet long cable and made of a very thick flexible insulator.There are 6 buttons on OBD2 Scanner:scroll up/down,enter/exit and buttons that quick query VIN vehicle number& the DTC fault code.
- ABS / Airbag codes NOT Supported - It is able to read and clear check engine information which is part of OBDII system, but it cannot work with non-OBDII systems, including ABS / Airbag / Oil Service Light, etc.
- 【Your Personal CEL Doctor – Read & Clear Engine Codes】The NT301 OBD2 scanner lets you read diagnostic trouble codes (DTCs), check em-issions readiness, turn off your Check Engine Light (CEL) or MIL, reset monitors, and view live data streams. It retrieves your vehicle's VIN instantly. Like all standard OBD2 scanners, it clears codes only after repairs are completed—if the issue persists, the code will return. Designed for DIYers who want to understand what’s really going on under the hood.
- 【Easy Code Reading – Just Plug & Play】Simply plug into the OBD2 port, turn the ignition to “ON” (engine off), and select the correct menu: Select OBDII-> Wait for seconds-> Select Read codes. For accurate results, ensure your vehicle is compatible and the OBD2 port is free from damage or wiring issues. No batteries needed— powered directly by your car.
- 【Live Data Graphing & Accuracy for Most OBD2 Vehicles】View and log live sensor data in graph form—monitor oxygen sensors, fuel trims, coolant temp, RPM, and more. Spot trends and suspicious values in real time. Compatible with most 1996+ gasoline cars, light trucks, and SUVs sold in the U.S., as well as many 2000+ European and Asian models. Also works on 12V diesel vehicles equipped with OBD2.
- 【S-mog Check Helper – Know Your Readiness Status at a Glance】With dedicated I/M readiness hotkeys and a simple Red-Yellow-Green LED indicator, you’ll instantly know if your vehicle is ready for em-issions testing. Built-in speaker provides audio feedback. No guesswork—just confidence before you head to the test center.
- 【A Must-Have Tool for Every Home Mechanic】Compact, rugged, and ready to use right out of the box. The 2.8” color screen is easy to read, even in daylight. No charging or setup required—just plug into the 16-pin DLC and start diagnosing. Recommended by professional mechanics on YouTube and trusted by DIYers worldwide.
Last update on 2026-03-24 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.