Date: 2011-09-06
Chrysler (FCA US, LLC)
NHTSA Action Number: EA11010
Components: EXTERIOR LIGHTING:HEADLIGHTS
Subject: Loss of headlight illumination
Opened From: 2011-09-06 - 2012-11-29
Summary
The subject vehicle (SV) population includes MY 2005-2006 vehicles built between March 2004 and December 2005 manufactured with a TRW supplied headlight switch assembly (HSA).The HSA was the primary focus of the investigation; earlier and later vehicles utilized different HSAs.Consumers complain that the headlights in the subject vehicles do not illuminate when the HSA is turned on, or that the headlights extinguish while on (subject failure).No other driving lights are affected.The front marker, tail, and instrument lamps operate.Also, the high beams can be illuminated by holding the turn signal stalk in the up position.As reported by consumers, turning the HSA off and on typically corrects the failure.Initially the failures occur infrequently but they become progressively more frequent with age.Chrysler has indicated its intention to offer of an extended lifetime warranty on the HSA, so that consumers with this problem can have their HSA replaced at no charge when they begin experiencing the subject failure.Commencing sometime in early 2013, Chrysler will send letters to SV owners notifying them of the lifetime warranty.The SV headlight system design is essentially the same as that described in EA 05-009, which involved headlight anomalies in earlier model Chrysler minivans; refer to it to for additional information.The subject failure is caused by friction between the plastic cam and metal surfaces of the electrical contacts in the HSA, which results in the production of plastic particles (debris).Analysis shows that debris can collect on the electrical contact that controls the headlights, resulting in an open circuit and preventing the headlights from turning on.Subsequent operation of the HSA may temporarily displace the debris, at which time the headlights operate correctly.Lubricant was applied to the plastic cam beginning in December 2005, reducing debris production.Consequently, subsequent failure levels were lower.The report counts shown above include only those that involve the subject failure.Reports involving other failure modes which were identified have not been included either because they were not safety related, or if they were safety related, because there was no defect trend.The single crash event listed in the Failure Report Summary Table above involved a deer strike allegedly due to loss of headlights in February 2006.No injuries were reported in this crash.An April 2004 non-crash incident (?Other? above) involved a momentary loss of headlights.The consumer drove into a ditch, and one minor injury was alleged. The subject vehicles experienced a 2.2% warranty claim rate.While standing alone this would appear to be significant, a portion of these warranty claims likely involve other problems with the HSA unrelated to the subject failure.In view of the on road experience of drivers in rapidly restoring headlight illumination by turning the headlight switch off and on again, the rate and particularly the recent trend in problems with the switch, and Chrysler?s extended lifetime warranty coupled with the owner notification of that extended warranty, further investigation does not appear to be warranted.Accordingly, the investigation is closed.The closing of this investigation does not constitute a finding by NHTSA that a safety-related defect does not exist, and the agency reserves the right to take additional action if warranted by new circumstances.Details on Chrysler?s lifetime HSA warranty extension for the SV population will be available in the public file for this investigation.
Investigation Documents
For Latest Documents related to this Investigation, visit the NHTSA Website.
Click the (+) Plus Sign
Then click Associated Document(s).
- Compatibility: Please input your vehicle into the Amazon...
- Lights Dim Over Time, Replace In Pairs: Your lights are a...
- More Downroad Visibility: XtraVision bulbs have an enhanced...
- Confirm Fit: When using the Amazon Part Finder, be sure to...
- Reliable Design For Optimal Performance: SilverStar has a...
Search NHTSA Database for Recalls
Search NHTSA Database for (TSB's) Technical Service Bulletins
Technical Service Bulletins TSB's List
Previous Investigation | Next Investigation |
- CEL Doctor: The ANCEL AD310 is one of the best-selling OBD II scanners on the market and is recommended by Scotty Kilmer, a YouTuber and auto mechanic. It can easily determine the cause of the check engine light coming on. After repairing the vehicle's problems, it can quickly read and clear diagnostic trouble codes of emission system, read live data & hard memory data, view freeze frame, I/M monitor readiness and collect vehicle information.
- Sturdy and Compact: Equipped with a 2.5 foot cable made of very thick, flexible insulation. It is important to have a sturdy scanner as it can easily fall to the ground when working in a car. The AD310 OBD2 scanner is a well-constructed mechanic tool with a sleek design. It weighs 12 ounces and measures 8.9 x 6.9 x 1.4 inches. Thanks to its compact design and light weight, transporting the device is not a problem. The buttons are clearly labelled and the screen is large and displays results clearly.
- Accurate Fast and Easy to Use: The AD310 scanner can help you or your mechanic understand if your car is in good condition, provides exceptionally accurate and fast results, reads and clears engine trouble emission codes in seconds after you fixed the problem. This device will let you know immediately and fix the problem right away without any car knowledge. No need for batteries or a charger, get power directly from the OBDII Data Link Connector in your vehicle.
- OBDII Protocols and Car Compatibility: Many cheap scan tools do not really support all OBD2 protocols. AD310 scanner as it can support all OBDII protocols such as KWP2000, J1850 VPW, ISO9141, J1850 PWM and CAN. This device also has extensive vehicle compatibility with 1996 US-based, 2000 EU-based and Asian cars, light trucks, SUVs, as well as newer OBD2 and CAN vehicles both domestic and foreign. Pls confirm with our customer service whether it is compatible with your vehicle before purchasing.
- Home Necessity and Worthy to Own: This is an excellent code reader to travel or home with as it weighs less and it is compact in design. You can easily slide it in your backpack as you head to the garage, or put it on the dashboard, this will be a great fit for you. The AD310 is not only portable, but also accurate and fast in performance. Moreover, it covers various car brands and is suitable for people who just need a code reader to check their car.
- Multi-Functions - Practical Multi-Functions OBD2 code reader features built-in OBD2 DTC lookup library, which help you to determine the cause of the engine light, read code, erase code, view freeze frame, I/M ready, vehicle information, data flow, real-time curve, get vehicle speed information, calculate load value, engine coolant temperature, get engine speed.
- Wide Capability - Supports 9 protocols compatible with most 1996 US-Based, 2000 EU-Based and Asian cars, and newer OBD II & CAN domestic or import vehicles. Supports 6 languages - English,German, Dutch, Spanish, French, Italian.
- 2.8" LCD Display - Designed with a clear display 2.8" Large LCD screen - white backlight and contrast adjustment. No need any battery or charger, OBD reader gets the power directly from your vehicle through the OBDII Data Link Connector.
- Compact Design - Car diagnostic scanner is equipped with a 2.5 feet long cable and made of a very thick flexible insulator.There are 6 buttons on OBD2 Scanner:scroll up/down,enter/exit and buttons that quick query VIN vehicle number& the DTC fault code.
- ABS / Airbag codes NOT Supported - It is able to read and clear check engine information which is part of OBDII system, but it cannot work with non-OBDII systems, including ABS / Airbag / Oil Service Light, etc.
- 【Your Personal CEL Doctor – Read & Clear Engine Codes】The NT301 OBD2 scanner lets you read diagnostic trouble codes (DTCs), check em-issions readiness, turn off your Check Engine Light (CEL) or MIL, reset monitors, and view live data streams. It retrieves your vehicle's VIN instantly. Like all standard OBD2 scanners, it clears codes only after repairs are completed—if the issue persists, the code will return. Designed for DIYers who want to understand what’s really going on under the hood.
- 【Easy Code Reading – Just Plug & Play】Simply plug into the OBD2 port, turn the ignition to “ON” (engine off), and select the correct menu: Select OBDII-> Wait for seconds-> Select Read codes. For accurate results, ensure your vehicle is compatible and the OBD2 port is free from damage or wiring issues. No batteries needed— powered directly by your car.
- 【Live Data Graphing & Accuracy for Most OBD2 Vehicles】View and log live sensor data in graph form—monitor oxygen sensors, fuel trims, coolant temp, RPM, and more. Spot trends and suspicious values in real time. Compatible with most 1996+ gasoline cars, light trucks, and SUVs sold in the U.S., as well as many 2000+ European and Asian models. Also works on 12V diesel vehicles equipped with OBD2.
- 【S-mog Check Helper – Know Your Readiness Status at a Glance】With dedicated I/M readiness hotkeys and a simple Red-Yellow-Green LED indicator, you’ll instantly know if your vehicle is ready for em-issions testing. Built-in speaker provides audio feedback. No guesswork—just confidence before you head to the test center.
- 【A Must-Have Tool for Every Home Mechanic】Compact, rugged, and ready to use right out of the box. The 2.8” color screen is easy to read, even in daylight. No charging or setup required—just plug into the 16-pin DLC and start diagnosing. Recommended by professional mechanics on YouTube and trusted by DIYers worldwide.
Last update on 2026-03-24 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.