Date: 2014-07-07
Evenflo Company, Inc.
NHTSA Action Number: EA14003
Components: CHILD SEAT:HARNESS/CROTCH BUCKLE
Subject: Car Seat Harness Buckle
Opened From: 2014-07-07 - 2014-10-31
NHTSA Recall Number: 14C006
Summary
On January 31, 2014, the Office of Defects Investigation (ODI) opened this investigation as PE14-003 based on 18 reports from consumers alleging the harness buckle on their convertible or booster car seat was difficult to unlatch or would not unlatch. Separately, ODI's investigation of harness buckles (see EA13-001) in Graco Children's Products, Inc. (Graco), revealed that the Evenflo Company, Inc. (Evenflo) also used ?QT1 and ?QT3 harness buckles supplied by AmSafe Commercial Products, Inc. in car seats that Evenflo produced.On February 7, 2014 Graco submitted a Defect Information Report (DIR) to recall approximately 3.7 million Graco convertible and booster car seats produced with QT1 and QT3 buckles. Graco did not, at that time, recall its Rear Facing Infant (RFI) seats that used the same buckles.On April 2, 2014, Evenflo submitted a DIR to recall approximately 1.3 million convertible and booster car seats produced with QT1 and QT3 buckles. Like Graco, Evenflo excluded its RFIcar seats from this recall.On June 27, 2014, Graco submitted a DIR which expanded its earlier recall to include approximately 1.9 million Graco RFI car seats produced with QT1 buckles. Graco also committed to conduct a Customer Service Campaign with notification to registered consumers to replace the QT3 harness buckles.On July 7, 2014 ODI upgraded this investigation to Engineering Analysis EA14-003 to continue its investigation concerning Evenflo's RFI car seats. On August 29, 2014, in response to an ODI information request, Evenflo disputed that a safety risk was present in the buckles and claimed that in an emergency situation the entire car seat could be removed from the vehicle, with the child inside.On October 14, 2014, the Agency contacted Evenflo, and advised that the Agency was prepared to send a Recall Request Letter if the company did not recall the RFI. As stated to Evenflo, it was the Agency's position that the car seats should be recalled because the same QT1 buckles had already been recalled by Graco in its RFI; the complaint data was sufficient to warrant a recall; and, there was no evidence that any differences in the configuration of Evenflo RFI compared to Graco's RFI had an impact on the functioning of the buckle. The Agency had previously described to Evenflo its serious concerns about the inherent safety risk present when a child in an RFI needed to be quickly removed from a vehicle due to an emergency situation and the buckle was difficult to or would not open.On October 20, 2014, Evenflo submitted a DIR recalling 202,346 RFI car seats produced with the QT1 buckles. In its chronology, Evenflo states that the company had received 10 consumer complaints of difficulty opening the buckle. However, at the time the DIR was submitted the Agency was aware of 71 unique complaints submitted to Evenflo and there were two additional complaints made directly to the Agency. The DIR also stated that Evenflo would conduct a Customer Awareness Campaign (CAC) to replace the QT3 buckles used on the non-recalled RFI models. Registered owners of both the recalled seats and the seats covered by the CAC will receive notification letters informing them of the recall and CAC action. Evenflo's two recalls and CAC action covers all Evenflo car seats produced with QT1 and QT3 buckles. Evenflo's DIR states that it voluntarily recalled its convertible and booster seats in April 2014. Under the National Traffic and Motor Vehicle Safety Act, a manufacturer of an item of replacement equipment is, in fact, obligated to provide notice once the manufacturer learns that the item of equipment contains a defect related to motor vehicle safety. See 49 U.S.C.
Investigation Documents
For Latest Documents related to this Investigation, visit the NHTSA Website.
Click the (+) Plus Sign
Then click Associated Document(s).
- Convertible car seat grows with your child from rear-facing...
- Extend2Fit 4-position adjustable extension panel provides up...
- Up to 50 lb rear-facing, allowing your child to safely ride...
- Graco ProtectPlus Engineered to the newest testing standards...
- No-Rethread Simply Safe Adjust Harness System allows the...
- 3-in-1 car seat grows with your child from rear-facing...
- Slim design with dual integrated cup holders that rotate...
- Graco ProtectPlus Engineered to the newest testing standards...
- No-Rethread Simply Safe Adjust Harness System allows the...
- Choose the perfect headrest height from 10 positions to get...
Search NHTSA Database for Recalls
Search NHTSA Database for (TSB's) Technical Service Bulletins
Technical Service Bulletins TSB's List
Previous Investigation | Next Investigation |
- CEL Doctor: The ANCEL AD310 is one of the best-selling OBD II scanners on the market and is recommended by Scotty Kilmer, a YouTuber and auto mechanic. It can easily determine the cause of the check engine light coming on. After repairing the vehicle's problems, it can quickly read and clear diagnostic trouble codes of emission system, read live data & hard memory data, view freeze frame, I/M monitor readiness and collect vehicle information.
- Sturdy and Compact: Equipped with a 2.5 foot cable made of very thick, flexible insulation. It is important to have a sturdy scanner as it can easily fall to the ground when working in a car. The AD310 OBD2 scanner is a well-constructed mechanic tool with a sleek design. It weighs 12 ounces and measures 8.9 x 6.9 x 1.4 inches. Thanks to its compact design and light weight, transporting the device is not a problem. The buttons are clearly labelled and the screen is large and displays results clearly.
- Accurate Fast and Easy to Use: The AD310 scanner can help you or your mechanic understand if your car is in good condition, provides exceptionally accurate and fast results, reads and clears engine trouble emission codes in seconds after you fixed the problem. This device will let you know immediately and fix the problem right away without any car knowledge. No need for batteries or a charger, get power directly from the OBDII Data Link Connector in your vehicle.
- OBDII Protocols and Car Compatibility: Many cheap scan tools do not really support all OBD2 protocols. AD310 scanner as it can support all OBDII protocols such as KWP2000, J1850 VPW, ISO9141, J1850 PWM and CAN. This device also has extensive vehicle compatibility with 1996 US-based, 2000 EU-based and Asian cars, light trucks, SUVs, as well as newer OBD2 and CAN vehicles both domestic and foreign. Pls confirm with our customer service whether it is compatible with your vehicle before purchasing.
- Home Necessity and Worthy to Own: This is an excellent code reader to travel or home with as it weighs less and it is compact in design. You can easily slide it in your backpack as you head to the garage, or put it on the dashboard, this will be a great fit for you. The AD310 is not only portable, but also accurate and fast in performance. Moreover, it covers various car brands and is suitable for people who just need a code reader to check their car.
- Multi-Functions - Practical Multi-Functions OBD2 code reader features built-in OBD2 DTC lookup library, which help you to determine the cause of the engine light, read code, erase code, view freeze frame, I/M ready, vehicle information, data flow, real-time curve, get vehicle speed information, calculate load value, engine coolant temperature, get engine speed.
- Wide Capability - Supports 9 protocols compatible with most 1996 US-Based, 2000 EU-Based and Asian cars, and newer OBD II & CAN domestic or import vehicles. Supports 6 languages - English,German, Dutch, Spanish, French, Italian.
- 2.8" LCD Display - Designed with a clear display 2.8" Large LCD screen - white backlight and contrast adjustment. No need any battery or charger, OBD reader gets the power directly from your vehicle through the OBDII Data Link Connector.
- Compact Design - Car diagnostic scanner is equipped with a 2.5 feet long cable and made of a very thick flexible insulator.There are 6 buttons on OBD2 Scanner:scroll up/down,enter/exit and buttons that quick query VIN vehicle number& the DTC fault code.
- ABS / Airbag codes NOT Supported - It is able to read and clear check engine information which is part of OBDII system, but it cannot work with non-OBDII systems, including ABS / Airbag / Oil Service Light, etc.
- 【Your Personal CEL Doctor – Read & Clear Engine Codes】The NT301 OBD2 scanner lets you read diagnostic trouble codes (DTCs), check em-issions readiness, turn off your Check Engine Light (CEL) or MIL, reset monitors, and view live data streams. It retrieves your vehicle's VIN instantly. Like all standard OBD2 scanners, it clears codes only after repairs are completed—if the issue persists, the code will return. Designed for DIYers who want to understand what’s really going on under the hood.
- 【Easy Code Reading – Just Plug & Play】Simply plug into the OBD2 port, turn the ignition to “ON” (engine off), and select the correct menu: Select OBDII-> Wait for seconds-> Select Read codes. For accurate results, ensure your vehicle is compatible and the OBD2 port is free from damage or wiring issues. No batteries needed— powered directly by your car.
- 【Live Data Graphing & Accuracy for Most OBD2 Vehicles】View and log live sensor data in graph form—monitor oxygen sensors, fuel trims, coolant temp, RPM, and more. Spot trends and suspicious values in real time. Compatible with most 1996+ gasoline cars, light trucks, and SUVs sold in the U.S., as well as many 2000+ European and Asian models. Also works on 12V diesel vehicles equipped with OBD2.
- 【S-mog Check Helper – Know Your Readiness Status at a Glance】With dedicated I/M readiness hotkeys and a simple Red-Yellow-Green LED indicator, you’ll instantly know if your vehicle is ready for em-issions testing. Built-in speaker provides audio feedback. No guesswork—just confidence before you head to the test center.
- 【A Must-Have Tool for Every Home Mechanic】Compact, rugged, and ready to use right out of the box. The 2.8” color screen is easy to read, even in daylight. No charging or setup required—just plug into the 16-pin DLC and start diagnosing. Recommended by professional mechanics on YouTube and trusted by DIYers worldwide.
Last update on 2026-03-23 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.