Date: 2007-03-13
Mazda Motor Corp.
NHTSA Action Number: PE07015
Components: POWER TRAIN:MANUAL TRANSMISSION
Subject: FAILURE OF ENGINE/TRANSMISSION MOUNT
Opened From: 2007-03-13 - 2007-07-13
NHTSA Recall Number: 07V295
Summary
ON JULY 2, 2007 MAZDA NORTH AMERICAN OPERATIONS SUBMITTED A DEFECT INFORMATION REPORT TO NHTSA REGARDING THE LEFT HAND SIDE (LHS) ENGINE MOUNT BOLTS IN APPROXIMATELY 5,700 MODEL YEAR (MY) 2007 MAZDASPEED3 VEHICLES BUILT FROM JUNE 26, 2006 THROUGH MAY 19, 2007 (MAZDA RECALL 4607F, NHTSA RECALL 07V-295).ACCORDING TO MAZDA, THE LHS ENGINE MOUNT COULD LOOSEN UNDER REPEATED LOADS PRODUCED DURING RAPID ACCELERATIONS.LOOSE BOLTS COULD PULL OUT OR BREAK, ALLOWING THE ENGINE AND TRANSMISSION TO DROP ON THE LEFT SIDE.WHEN THE ENGINE DROPS, THE DRIVESHAFT MAY BECOME DETACHED AND DISABLE THE VEHICLE.MAZDA WILL REPLACE THE LHS ENGINE MOUNT BOLTS IN THE RECALLED VEHICLES.IN ADDITION, THE LHS ENGINE MOUNT RUBBER AND BRACKET WILL BE INSPECTED AND REPLACED IF NECESSARY.MAZDA STATED IN ITS LETTER THAT IT CONTINUES TO BELIEVE THAT THERE IS NO UNREASONABLE RISK OF ACCIDENT OR INJURY ASSOCIATED WITH THE CONDITION, CITING THE LACK OF ACCIDENTS AND CONTENDING THAT MOST OF THE REPORTED INCIDENTS WERE IDENTIFIED BY OPERATORS BEFORE THERE WAS ANY EFFECT ON VEHICLE OPERATION. ODI DISAGREES WITH MAZDA.ALTHOUGH ONLY ABOUT HALF THE SUBJECT VEHICLES HAD ENTERED SERVICE BY THE CUTOFF DATE OF THE FAILURE DATA SUBMITTED BY MAZDA, ODI'S ANALYSIS OF CONSUMER COMPLAINT AND WARRANTY CLAIM DATA IDENTIFIED A TOTAL OF 36 SUBJECT VEHICLES WITH REPAIRS FOR LOOSE OR BROKEN LHS MOUNTING BOLTS.ODI VERIFIED 17 INCIDENTS OF BOLT FRACTURE RESULTING IN THE ENGINE DROPPING IN THESE VEHICLES, INCLUDING AT LEAST 10 THAT RESULTED IN VEHICLE DISABLEMENT.ALL OF THE BOLT FRACTURES OCCURRED IN THE FIRST 7 MONTHS OF VEHICLE SERVICE, WITH 8 FAILING WITHIN 4 MONTHS.THESE FAILURES RESULT IN A RELATIVELY HIGH FAILURE RATE WHEN COMPARED WITH OTHER ODI INVESTIGATIONS INVOLVING DEFECT CONDITIONS WITH SIMILAR SAFETY CONSEQUENCES THAT RESULTED IN SAFETY RECALLS, PARTICULARLY WHEN CONSIDERING THE VERY SHORT SERVICE LIFE OF THE SUBJECT VEHICLE POPULATION. ODI INTERVIEWED OWNERS TO FURTHER ASSESS THE SAFETY CONSEQUENCES OF THE LHS BOLT DEFECT.MORE THAN TWO-THIRDS OF THOSE INTERVIEWED WHO EXPERIENCED AN ENGINE FALL INCIDENT INDICATED THE EVENT DISABLED THE VEHICLE, SOME BEING STRANDED IN THE FLOW OF TRAFFIC.AT LEAST THREE-QUARTERS OF THESE INCIDENTS OCCURRED WHEN THE DRIVER WAS ATTEMPTING TO INCREASE SPEED, RESULTING IN A SUDDEN CHANGE IN ACCELERATION.EACH OF THESE DRIVERS EXPRESSED SOME CONCERNS ABOUT THE POTENTIAL SAFETY HAZARDS ASSOCIATED WITH THE EVENT, INCLUDING THE POSSIBILITY OF BEING STRUCK BY TRAILING OR CROSSING TRAFFIC.IN ONE INCIDENT THE VEHICLE VEERED TO THE LEFT ACROSS ONCOMING TRAFFIC LANES AFTER THE LHS MOUNT BOLT BROKE, STOPPING IN THE ROADWAY AFTER STRIKING A CURB. BASED ON THIS INFORMATION, ODI STRONGLY DISAGREES WITH MAZDA'S CHARACTERIZATION OF THE SAFETY RISK ASSOCIATED WITH THE DEFECT IN THE LHS ENGINE MOUNT BOLTS.THIS INVESTIGATION HAS BEEN CLOSED BASED ON MAZDA'S RECALL.ODI WILL MONITOR THE EFFECTIVENESS OF MAZDA'S CAMPAIGN REMEDY AND TAKE FURTHER ACTION IF WARRANTED.
Investigation Documents
For Latest Documents related to this Investigation, visit the NHTSA Website.
Click the (+) Plus Sign
Then click Associated Document(s).
- Advanced protection against the four main causes of engine...
- Delivers 40% stronger wear protection than industry...
- Provides 15% better deposit defense vs. industry standards...
- Up to 2.5X better heat protection vs. industry standards to...
- Engineered for excellent low-temperature flow, reducing...
- Formulated for engines with 75,000 miles or more, Valvoline...
- Delivers 20% better wear protection and 15% better sludge...
- Extra detergents safeguard against friction, corrosion and...
- Advanced friction-fighting additives help maximize...
- Provides performance benefits for high mileage, new and...
Search NHTSA Database for Recalls
Search NHTSA Database for (TSB's) Technical Service Bulletins
Technical Service Bulletins TSB's List
Previous Investigation | Next Investigation |
- CEL Doctor: The ANCEL AD310 is one of the best-selling OBD II scanners on the market and is recommended by Scotty Kilmer, a YouTuber and auto mechanic. It can easily determine the cause of the check engine light coming on. After repairing the vehicle's problems, it can quickly read and clear diagnostic trouble codes of emission system, read live data & hard memory data, view freeze frame, I/M monitor readiness and collect vehicle information.
- Sturdy and Compact: Equipped with a 2.5 foot cable made of very thick, flexible insulation. It is important to have a sturdy scanner as it can easily fall to the ground when working in a car. The AD310 OBD2 scanner is a well-constructed mechanic tool with a sleek design. It weighs 12 ounces and measures 8.9 x 6.9 x 1.4 inches. Thanks to its compact design and light weight, transporting the device is not a problem. The buttons are clearly labelled and the screen is large and displays results clearly.
- Accurate Fast and Easy to Use: The AD310 scanner can help you or your mechanic understand if your car is in good condition, provides exceptionally accurate and fast results, reads and clears engine trouble emission codes in seconds after you fixed the problem. This device will let you know immediately and fix the problem right away without any car knowledge. No need for batteries or a charger, get power directly from the OBDII Data Link Connector in your vehicle.
- OBDII Protocols and Car Compatibility: Many cheap scan tools do not really support all OBD2 protocols. AD310 scanner as it can support all OBDII protocols such as KWP2000, J1850 VPW, ISO9141, J1850 PWM and CAN. This device also has extensive vehicle compatibility with 1996 US-based, 2000 EU-based and Asian cars, light trucks, SUVs, as well as newer OBD2 and CAN vehicles both domestic and foreign. Pls confirm with our customer service whether it is compatible with your vehicle before purchasing.
- Home Necessity and Worthy to Own: This is an excellent code reader to travel or home with as it weighs less and it is compact in design. You can easily slide it in your backpack as you head to the garage, or put it on the dashboard, this will be a great fit for you. The AD310 is not only portable, but also accurate and fast in performance. Moreover, it covers various car brands and is suitable for people who just need a code reader to check their car.
- Multi-Functions - Practical Multi-Functions OBD2 code reader features built-in OBD2 DTC lookup library, which help you to determine the cause of the engine light, read code, erase code, view freeze frame, I/M ready, vehicle information, data flow, real-time curve, get vehicle speed information, calculate load value, engine coolant temperature, get engine speed.
- Wide Capability - Supports 9 protocols compatible with most 1996 US-Based, 2000 EU-Based and Asian cars, and newer OBD II & CAN domestic or import vehicles. Supports 6 languages - English,German, Dutch, Spanish, French, Italian.
- 2.8" LCD Display - Designed with a clear display 2.8" Large LCD screen - white backlight and contrast adjustment. No need any battery or charger, OBD reader gets the power directly from your vehicle through the OBDII Data Link Connector.
- Compact Design - Car diagnostic scanner is equipped with a 2.5 feet long cable and made of a very thick flexible insulator.There are 6 buttons on OBD2 Scanner:scroll up/down,enter/exit and buttons that quick query VIN vehicle number& the DTC fault code.
- ABS / Airbag codes NOT Supported - It is able to read and clear check engine information which is part of OBDII system, but it cannot work with non-OBDII systems, including ABS / Airbag / Oil Service Light, etc.
- 【Your Personal CEL Doctor – Read & Clear Engine Codes】The NT301 OBD2 scanner lets you read diagnostic trouble codes (DTCs), check em-issions readiness, turn off your Check Engine Light (CEL) or MIL, reset monitors, and view live data streams. It retrieves your vehicle's VIN instantly. Like all standard OBD2 scanners, it clears codes only after repairs are completed—if the issue persists, the code will return. Designed for DIYers who want to understand what’s really going on under the hood.
- 【Easy Code Reading – Just Plug & Play】Simply plug into the OBD2 port, turn the ignition to “ON” (engine off), and select the correct menu: Select OBDII-> Wait for seconds-> Select Read codes. For accurate results, ensure your vehicle is compatible and the OBD2 port is free from damage or wiring issues. No batteries needed— powered directly by your car.
- 【Live Data Graphing & Accuracy for Most OBD2 Vehicles】View and log live sensor data in graph form—monitor oxygen sensors, fuel trims, coolant temp, RPM, and more. Spot trends and suspicious values in real time. Compatible with most 1996+ gasoline cars, light trucks, and SUVs sold in the U.S., as well as many 2000+ European and Asian models. Also works on 12V diesel vehicles equipped with OBD2.
- 【S-mog Check Helper – Know Your Readiness Status at a Glance】With dedicated I/M readiness hotkeys and a simple Red-Yellow-Green LED indicator, you’ll instantly know if your vehicle is ready for em-issions testing. Built-in speaker provides audio feedback. No guesswork—just confidence before you head to the test center.
- 【A Must-Have Tool for Every Home Mechanic】Compact, rugged, and ready to use right out of the box. The 2.8” color screen is easy to read, even in daylight. No charging or setup required—just plug into the 16-pin DLC and start diagnosing. Recommended by professional mechanics on YouTube and trusted by DIYers worldwide.
Last update on 2026-03-25 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.