Loading...


Date: 2014-05-20

Nissan North America, Inc.

NHTSA Action Number: PE14014

Components: SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:MASTER CYLINDER

Subject: Excessive Brake Pedal Travel

Opened From: 2014-05-20 - 2015-05-13


NHTSA Recall Number:


Summary

On May 20, 2014, ODI opened PE14-014 based on eight complaints alleging incidents of excessive brake pedal travel in model year (MY) 2013 through 2014 Nissan Sentra, Versa Sedan and Versa Note passenger cars (Figure 1) and information in Early Warning Reporting field reports indicating issues with master cylinder internal seals.In response to an information request letter sent by ODI, Nissan identified a condition with the master cylinder in early production subject vehicles that could result in a slow internal leak past one of the recuperating seals to the brake reservoir when the brake pedal is depressed very slowly or lightly (Figure 2).The subject vehicles are equipped with fixed seal master cylinders supplied by TRW.To address concerns with water hammer noise with the standard seal design, the master cylinders in the early production subject vehicles used AWH (anti-water hammer) seals.The AWH seals are sensitive to contamination from assembly plant cleanliness issues, which can produce the internal leak condition during slow or light brake applies but perform as designed with normal or emergency brake applications.TRW indicated that the risk of contamination interacting with the subject seals is greatest after the evacuation and pressure fill process used to fill the brake system during the manufacturing process (early life issue).TRW developed a new master cylinder seal design (EVO seal) that addresses the noise concern and eliminates the internal leak concern associated with contamination by providing a secondary seal (Figure 3).Nissan implemented the new master cylinder design in vehicle production on September 23, 2013.ODI's analysis shows that the master cylinder warranty claim rate is much higher in vehicles produced before the change (Figure 4).Statistical analysis showed that the condition is an early-life problem with relatively low failure rates projected through 100,000 miles and approximately 58 percent of the failures projected to occur by that mileage have already occurred (Table 1).Warranty claims are highest (78% of claims) in vehicles with less than 10,000 miles (Figure 5) and 50 percent of claims involved vehicles with less than 90 days in service (Figure 6).ODI evaluated 22 crash claims that included allegations of master cylinder failure, sinking brake pedal or pedal to the floor (Table 2).The analysis identified only three crashes in which a brake performance issue related to the master cylinder was duplicated by post-incident inspection, including one with a different problem than the seal leak issue (a broken plunger).The two crash complaints related to a possible master cylinder concern involved 1 vehicle with the AWH seal and 1 with the EVO seal.Both were minor crashes.The remaining crashes do not appear to be related to any issues with the master cylinder or other brake system fault.In the 4 crashes with Event Data Recorderinformation available, the data indicated that the brakes were applied too late to avoid the collisions.These include 2 crashes with less than a half second of braking before impact and 2 in which brake applications lasting 1.0 to 2.5 seconds resulted in high decelerations consistent with fully functioning brake systems, but too late to avoid the collision.Overall, the rates of crashes adjusted for vehicle exposure (total vehicle years in service) do not show any correlation to the high warranty rates associated with the AWH seal leak concern (Table 3 & Figure 7).Given these circumstances, further use of the agency resources in this matter does not appear to be warranted.Accordingly, this investigation is closed. The closing o


Investigation Documents


For Latest Documents related to this Investigation, visit the NHTSA Website.

Click the (+) Plus Sign

Then click Associated Document(s).


Bestseller No. 1
Autel Scanner MaxiCOM MK808S: 2026 Bidirectional Tool as MK808BT Pro MX808S M808Z, Work as MaxiCheck MX900 MK900BT, 28+ Service, Active Test, All System Diagnose, Injector C0ding, FCA Autoauth OS 11
  • 💝【Questions? We’re Here Anytime】MK808S is a...
  • 🔥🔥🔥【2026 NEWLY RELEASED BI-DIRECTIONAL...
  • 【28+ MOST POPULAR RESET SERVICE FOR 150 MAKES】Autel...
  • 【ALL SYSTEM DIAGNOSTICS, FACTORY-LEVEL SCANNER】The...
  • 【AUT0 SCAN & AUT0V1N, 10X FASTER】How much have you spent...
Bestseller No. 2
Autel Scanner MaxiCOM MK900BT, 2026 MK900-BT V2.0 Bidirectional Diagnostic Tool, 8in Up of MK900 MX900 MK808S MK808BT MX808S MK808Z, 3000+ Active Tests, 40+ Service, CAN-FD&DOIP, All System, FCA 11 OS
  • 💯【Conta.ct us for Support Directly】If you met any...
  • 🔥🔥🔥【2026 AUTEL FLAGSHIP MK900BT MK900-BT, NEW...
  • 🚗【3000+ ACTIVE TESTS (50➡3000+), SAME AS MS...
  • 🚗【40+ HOT SERVICES FOR 150 MAKES (28+➡40+)】Full...
  • 🚗【OE ALL SYSTEM DIAGNOSE, AUTO SCAN 2.0: SCAN LICENSE...

Search NHTSA Database for Recalls

Recalls List


Search NHTSA Database for (TSB's) Technical Service Bulletins

Technical Service Bulletins TSB's List


Search NHTSA Database for Vehicle Complaints

Complaints List


Previous Investigation

Next Investigation




Bestseller No. 1
ANCEL AD310 Classic Enhanced Universal OBD II Scanner Car Engine Fault Code Reader CAN Diagnostic Scan Tool, Read and Clear Error Codes for 1996 or Newer OBD2 Protocol Vehicle (Black)
  • CEL Doctor: The ANCEL AD310 is one of the best-selling OBD II scanners on the market and is recommended by Scotty Kilmer, a YouTuber and auto mechanic. It can easily determine the cause of the check engine light coming on. After repairing the vehicle's problems, it can quickly read and clear diagnostic trouble codes of emission system, read live data & hard memory data, view freeze frame, I/M monitor readiness and collect vehicle information.
  • Sturdy and Compact: Equipped with a 2.5 foot cable made of very thick, flexible insulation. It is important to have a sturdy scanner as it can easily fall to the ground when working in a car. The AD310 OBD2 scanner is a well-constructed mechanic tool with a sleek design. It weighs 12 ounces and measures 8.9 x 6.9 x 1.4 inches. Thanks to its compact design and light weight, transporting the device is not a problem. The buttons are clearly labelled and the screen is large and displays results clearly.
  • Accurate Fast and Easy to Use: The AD310 scanner can help you or your mechanic understand if your car is in good condition, provides exceptionally accurate and fast results, reads and clears engine trouble emission codes in seconds after you fixed the problem. This device will let you know immediately and fix the problem right away without any car knowledge. No need for batteries or a charger, get power directly from the OBDII Data Link Connector in your vehicle.
  • OBDII Protocols and Car Compatibility: Many cheap scan tools do not really support all OBD2 protocols. AD310 scanner as it can support all OBDII protocols such as KWP2000, J1850 VPW, ISO9141, J1850 PWM and CAN. This device also has extensive vehicle compatibility with 1996 US-based, 2000 EU-based and Asian cars, light trucks, SUVs, as well as newer OBD2 and CAN vehicles both domestic and foreign. Pls confirm with our customer service whether it is compatible with your vehicle before purchasing.
  • Home Necessity and Worthy to Own: This is an excellent code reader to travel or home with as it weighs less and it is compact in design. You can easily slide it in your backpack as you head to the garage, or put it on the dashboard, this will be a great fit for you. The AD310 is not only portable, but also accurate and fast in performance. Moreover, it covers various car brands and is suitable for people who just need a code reader to check their car.
Bestseller No. 2
MOTOPOWER MP69033 Car OBD2 Scanner Code Reader Engine Fault Scanner CAN Diagnostic Scan Tool for All OBD II Protocol Cars Since 1996, Yellow
  • Multi-Functions - Practical Multi-Functions OBD2 code reader features built-in OBD2 DTC lookup library, which help you to determine the cause of the engine light, read code, erase code, view freeze frame, I/M ready, vehicle information, data flow, real-time curve, get vehicle speed information, calculate load value, engine coolant temperature, get engine speed.
  • Wide Capability - Supports 9 protocols compatible with most 1996 US-Based, 2000 EU-Based and Asian cars, and newer OBD II & CAN domestic or import vehicles. Supports 6 languages - English,German, Dutch, Spanish, French, Italian.
  • 2.8" LCD Display - Designed with a clear display 2.8" Large LCD screen - white backlight and contrast adjustment. No need any battery or charger, OBD reader gets the power directly from your vehicle through the OBDII Data Link Connector.
  • Compact Design - Car diagnostic scanner is equipped with a 2.5 feet long cable and made of a very thick flexible insulator.There are 6 buttons on OBD2 Scanner:scroll up/down,enter/exit and buttons that quick query VIN vehicle number& the DTC fault code.
  • ABS / Airbag codes NOT Supported - It is able to read and clear check engine information which is part of OBDII system, but it cannot work with non-OBDII systems, including ABS / Airbag / Oil Service Light, etc.
Bestseller No. 3
FOXWELL NT301 OBD2 Scanner Live Data Professional Mechanic OBDII Diagnostic Code Reader Tool for Check Engine Light
  • 【Your Personal CEL Doctor – Read & Clear Engine Codes】The NT301 OBD2 scanner lets you read diagnostic trouble codes (DTCs), check em-issions readiness, turn off your Check Engine Light (CEL) or MIL, reset monitors, and view live data streams. It retrieves your vehicle's VIN instantly. Like all standard OBD2 scanners, it clears codes only after repairs are completed—if the issue persists, the code will return. Designed for DIYers who want to understand what’s really going on under the hood.
  • 【Easy Code Reading – Just Plug & Play】Simply plug into the OBD2 port, turn the ignition to “ON” (engine off), and select the correct menu: Select OBDII-> Wait for seconds-> Select Read codes. For accurate results, ensure your vehicle is compatible and the OBD2 port is free from damage or wiring issues. No batteries needed— powered directly by your car.
  • 【Live Data Graphing & Accuracy for Most OBD2 Vehicles】View and log live sensor data in graph form—monitor oxygen sensors, fuel trims, coolant temp, RPM, and more. Spot trends and suspicious values in real time. Compatible with most 1996+ gasoline cars, light trucks, and SUVs sold in the U.S., as well as many 2000+ European and Asian models. Also works on 12V diesel vehicles equipped with OBD2.
  • 【S-mog Check Helper – Know Your Readiness Status at a Glance】With dedicated I/M readiness hotkeys and a simple Red-Yellow-Green LED indicator, you’ll instantly know if your vehicle is ready for em-issions testing. Built-in speaker provides audio feedback. No guesswork—just confidence before you head to the test center.
  • 【A Must-Have Tool for Every Home Mechanic】Compact, rugged, and ready to use right out of the box. The 2.8” color screen is easy to read, even in daylight. No charging or setup required—just plug into the 16-pin DLC and start diagnosing. Recommended by professional mechanics on YouTube and trusted by DIYers worldwide.

Last update on 2026-03-23 / Affiliate links / Images from Amazon Product Advertising API


 

This product presentation was made with AAWP plugin.

Share to...