Loading...


Date: 2014-07-22

Chrysler (FCA US, LLC)

NHTSA Action Number: PE14022

Components: ELECTRICAL SYSTEM:ALTERNATOR/GENERATOR/REGULATOR

Subject: Alternator failure

Opened From: 2014-07-22 - 2014-11-06


NHTSA Recall Number: 14V634


Summary

On July 22, 2014, the Office of Defects Investigation (ODI) opened PE14-022 to investigate 14 complaints (VOQs) alleging incidents of alternator failure resulting in engine stall while driving in model year (MY) 2011 through 2012 Dodge Charger vehicles.The MY 2011 through 2012 Dodge Charger vehicles were sold with three different engine options:1) 3.6L V6 (VIN8 = G), 88,766 vehicles; 2) 5.7L V8 (VIN8 = T), 38,615 vehicles; and 3) 6.4L V8 (VIN8 = J), 2,406 MY 2012 vehicles.The 14 VOQs identified in the PE14-022 opening resume involve 13 vehicles with 3.6L V6 engines and 1 vehicle with unknown engine (no VIN provided).In an October 7, 2014 letter to NHTSA, Chrysler described a safety defect condition that could result in rapid alternator failure having limited or no detection in approximately 434,581 MY 2011 through 2014 Chrysler 300, Dodge Charger, Dodge Challenger, Dodge Durango and Jeep Grand Cherokee vehicles equipped with 3.6L engines and 160 amp alternators (NHTSA Recall No. 14V-634, Chrysler P60).The subject alternators are used in vehicles equipped with 3.6L V6 engines and without towing packages.According to Chrysler, the silicone diodes in the alternator rectifier bridge may experience thermal fatigue due to cyclic loading from the Electric Hydraulic Power Steering (EHPS) system, eventually resulting in no output, reduced output, or a fully shorted to ground condition.These failure modes vary in their time to failure and warning to the driver.Depending on the failure mode and timing, system voltage may drop to critically low levels, disabling systems such as the Anti-lock Brake System/Electronic Stability Control, Engine Control Module/Central Body Controller, or a total vehicle electrical system shut down (in the event of a short to ground failure mode).Analysis of complaints to ODI and Chrysler identified a total of 146 incidents of alternator failure resulting in engine stall while driving in MY 2011 through 2012 Dodge Charger vehicles, including 142 involving vehicles equipped with the 3.6L V6 engines (1.6 IPTV) that were included in 14V-634 and 4 involving vehicles with 5.7L V8 engines (0.1 IPTV), which are equipped with different alternators.Analysis of all alternator failure complaints found that approximately 48 percent of VOQs and 21 percent of Chrysler complaints involved allegations of engine stall.Many (98) complaints reported fire and/or smoke, but analysis of these determined that they involved thermal damage to the alternator diode and did not identify any incidents involving damage beyond the alternator assembly.One VOQ identified in the opening resume for PE14-022 alleged a crash, but further evaluation determined that this involved a minor rear-end impact with slight bumper damage.This investigation is closed based on Chrysler's decision to conduct a safety recall.The VOQs associated with this investigation are:10641479,10641366,10641349,10642017,10640770,10640687,10640553,10639692,10638810,10638356,10638175,10638143,10637460,10633806,10633304,10632943,10632006,10631704,10631613,10631420,10631088,10630991,10630854,10630844,10630108,10629623,10629603,10628228,10628150,10627941,10627342,10626452,10626254,10625962,10622385,10622340,10621603,10620961,10619481,10618950,10618948,10618539,10618476,10618334,10618081,10618107,10616834,10616461,10616456,10615754,10615719,10606580,10605090,10604958,10597295,10592085,10588675,10587141,10562463,10559730,10511407


Investigation Documents


For Latest Documents related to this Investigation, visit the NHTSA Website.

Click the (+) Plus Sign

Then click Associated Document(s).


Bestseller No. 1
Valvoline Advanced Full Synthetic SAE 0W-20 Motor Oil 5 QT
  • Advanced protection against the four main causes of engine...
  • Delivers 40% stronger wear protection than industry...
  • Provides 15% better deposit defense vs. industry standards...
  • Up to 2.5X better heat protection vs. industry standards to...
  • Engineered for excellent low-temperature flow, reducing...
Bestseller No. 2
Valvoline MaxLife High Mileage 5W-30 Synthetic Blend Motor Oil 5 Quart
  • Formulated for engines with 75,000 miles or more, Valvoline...
  • Delivers 20% better wear protection and 15% better sludge...
  • Extra detergents safeguard against friction, corrosion and...
  • Advanced friction-fighting additives help maximize...
  • Provides performance benefits for high mileage, new and...

Search NHTSA Database for Recalls

Recalls List


Search NHTSA Database for (TSB's) Technical Service Bulletins

Technical Service Bulletins TSB's List


Search NHTSA Database for Vehicle Complaints

Complaints List


Previous Investigation

Next Investigation




Bestseller No. 1
ANCEL AD310 Classic Enhanced Universal OBD II Scanner Car Engine Fault Code Reader CAN Diagnostic Scan Tool, Read and Clear Error Codes for 1996 or Newer OBD2 Protocol Vehicle (Black)
  • CEL Doctor: The ANCEL AD310 is one of the best-selling OBD II scanners on the market and is recommended by Scotty Kilmer, a YouTuber and auto mechanic. It can easily determine the cause of the check engine light coming on. After repairing the vehicle's problems, it can quickly read and clear diagnostic trouble codes of emission system, read live data & hard memory data, view freeze frame, I/M monitor readiness and collect vehicle information.
  • Sturdy and Compact: Equipped with a 2.5 foot cable made of very thick, flexible insulation. It is important to have a sturdy scanner as it can easily fall to the ground when working in a car. The AD310 OBD2 scanner is a well-constructed mechanic tool with a sleek design. It weighs 12 ounces and measures 8.9 x 6.9 x 1.4 inches. Thanks to its compact design and light weight, transporting the device is not a problem. The buttons are clearly labelled and the screen is large and displays results clearly.
  • Accurate Fast and Easy to Use: The AD310 scanner can help you or your mechanic understand if your car is in good condition, provides exceptionally accurate and fast results, reads and clears engine trouble emission codes in seconds after you fixed the problem. This device will let you know immediately and fix the problem right away without any car knowledge. No need for batteries or a charger, get power directly from the OBDII Data Link Connector in your vehicle.
  • OBDII Protocols and Car Compatibility: Many cheap scan tools do not really support all OBD2 protocols. AD310 scanner as it can support all OBDII protocols such as KWP2000, J1850 VPW, ISO9141, J1850 PWM and CAN. This device also has extensive vehicle compatibility with 1996 US-based, 2000 EU-based and Asian cars, light trucks, SUVs, as well as newer OBD2 and CAN vehicles both domestic and foreign. Pls confirm with our customer service whether it is compatible with your vehicle before purchasing.
  • Home Necessity and Worthy to Own: This is an excellent code reader to travel or home with as it weighs less and it is compact in design. You can easily slide it in your backpack as you head to the garage, or put it on the dashboard, this will be a great fit for you. The AD310 is not only portable, but also accurate and fast in performance. Moreover, it covers various car brands and is suitable for people who just need a code reader to check their car.
Bestseller No. 2
MOTOPOWER MP69033 Car OBD2 Scanner Code Reader Engine Fault Scanner CAN Diagnostic Scan Tool for All OBD II Protocol Cars Since 1996, Yellow
  • Multi-Functions - Practical Multi-Functions OBD2 code reader features built-in OBD2 DTC lookup library, which help you to determine the cause of the engine light, read code, erase code, view freeze frame, I/M ready, vehicle information, data flow, real-time curve, get vehicle speed information, calculate load value, engine coolant temperature, get engine speed.
  • Wide Capability - Supports 9 protocols compatible with most 1996 US-Based, 2000 EU-Based and Asian cars, and newer OBD II & CAN domestic or import vehicles. Supports 6 languages - English,German, Dutch, Spanish, French, Italian.
  • 2.8" LCD Display - Designed with a clear display 2.8" Large LCD screen - white backlight and contrast adjustment. No need any battery or charger, OBD reader gets the power directly from your vehicle through the OBDII Data Link Connector.
  • Compact Design - Car diagnostic scanner is equipped with a 2.5 feet long cable and made of a very thick flexible insulator.There are 6 buttons on OBD2 Scanner:scroll up/down,enter/exit and buttons that quick query VIN vehicle number& the DTC fault code.
  • ABS / Airbag codes NOT Supported - It is able to read and clear check engine information which is part of OBDII system, but it cannot work with non-OBDII systems, including ABS / Airbag / Oil Service Light, etc.
Bestseller No. 3
FOXWELL NT301 OBD2 Scanner Live Data Professional Mechanic OBDII Diagnostic Code Reader Tool for Check Engine Light
  • 【Your Personal CEL Doctor – Read & Clear Engine Codes】The NT301 OBD2 scanner lets you read diagnostic trouble codes (DTCs), check em-issions readiness, turn off your Check Engine Light (CEL) or MIL, reset monitors, and view live data streams. It retrieves your vehicle's VIN instantly. Like all standard OBD2 scanners, it clears codes only after repairs are completed—if the issue persists, the code will return. Designed for DIYers who want to understand what’s really going on under the hood.
  • 【Easy Code Reading – Just Plug & Play】Simply plug into the OBD2 port, turn the ignition to “ON” (engine off), and select the correct menu: Select OBDII-> Wait for seconds-> Select Read codes. For accurate results, ensure your vehicle is compatible and the OBD2 port is free from damage or wiring issues. No batteries needed— powered directly by your car.
  • 【Live Data Graphing & Accuracy for Most OBD2 Vehicles】View and log live sensor data in graph form—monitor oxygen sensors, fuel trims, coolant temp, RPM, and more. Spot trends and suspicious values in real time. Compatible with most 1996+ gasoline cars, light trucks, and SUVs sold in the U.S., as well as many 2000+ European and Asian models. Also works on 12V diesel vehicles equipped with OBD2.
  • 【S-mog Check Helper – Know Your Readiness Status at a Glance】With dedicated I/M readiness hotkeys and a simple Red-Yellow-Green LED indicator, you’ll instantly know if your vehicle is ready for em-issions testing. Built-in speaker provides audio feedback. No guesswork—just confidence before you head to the test center.
  • 【A Must-Have Tool for Every Home Mechanic】Compact, rugged, and ready to use right out of the box. The 2.8” color screen is easy to read, even in daylight. No charging or setup required—just plug into the 16-pin DLC and start diagnosing. Recommended by professional mechanics on YouTube and trusted by DIYers worldwide.

Last update on 2026-03-23 / Affiliate links / Images from Amazon Product Advertising API


 

This product presentation was made with AAWP plugin.

Share to...