Date: 2015-06-09
Fontaine Fifth Wheel Company
NHTSA Action Number: PE15023
Components: TRAILER HITCHES:FIFTH WHEEL ASSEMBLY
Subject: 5th Wheel malfunction
Opened From: 2015-06-09 - 2015-10-02
NHTSA Recall Number: 15V644
Summary
Fontaine has submitted recall 15E-066 covering Ultra LT 5th wheel produced from July 29, 2009 to May 27, 2013.The affected 5th wheels may experience cumulative damage during coupling procedures that can cause the locking mechanism to not properly engage, which could increase the risk of a vehicle crash.This investigation is closed as the affected components have been recalled.In its 2014 second quarter Early Warning Report (EWR), Fontaine reported one Death & Injury (D&I) crash.The crash resulted in two fatalities.The reported crash occurred on January 24, 2014, when a semi-trailer separated from a 2012 International ProStar.The separated trailer struck two oncoming vehicles killing both drivers.After requesting and receiving additional information (including police accident reports) from Fontaine about the crash incident, ODI learned that Federal Motor Carrier Inspectors determined the 5th wheel was fully functional and the crash was most likely due to driver error where the trailer was not properly coupled to the towing vehicle prior to the crash.Before the crash in January 2014, Fontaine had issued two Technical Service Bulletins (TSB) related to potential coupling issues with the Ultra LT 5th wheel.On March 1, 2011 Fontaine issued Service Bulletin SB-10036732-7541 (ODI #10036732) describing a condition in which its Ultra LT 5th wheel could become partially closed during a trailer coupling process.The partial closing could allow a driver who only conducts a pull test during the process to believe the fifth wheel lock is properly coupled to the trailer king pin when in fact it is not.Upon receipt of the March 2011 TSB ODI opened a defect investigation (PE11-012) on the subject 5th wheels.The intent of the investigation was to better understand the false latch conditions on the Ultra LT 5th.The investigation resulted in recalls from DTNA (11V289), PACCAR (11V-388), Volvo (11V-460) and Mack (11V-461).Fontaine did not issue an equipment recall.On April 4, 2012, Fontaine issued a second Service Bulletin SB-10044108-5115 (ODI #10044108) describing another issue with the Ultra LT 5th wheel.In this case the operating lever in the fifth wheel could become bent (due to improper coupling techniques) to such a degree that the locking mechanism would not extend completely across the throat of the fifth wheel or seat fully behind the locking jaw.As a result of the bent operating lever condition, Fontaine stated that a trailer could disconnect from the towing vehicle.Fontaine later ceased production of the Ultra LT 5th wheel all together.At the time ODI received the second TSB, there were no related consumer complaints and ODI did not feel that the bent locking mechanism was the result of a design or manufacturing defect.In April 2015 Fontaine requested a meeting with ODI and on May 13, 2015 met to discuss the D&I event and a third service campaign they were considering for the Ultra LT 5th wheels.After meeting with Fontaine to discuss the D&I event, ODI was concerned that Fontaine's Ultra LT 5th wheels were more vulnerable to foreseeable damage during truck/trailer coupling procedures than peer fifth wheel hitches.ODI opened this investigation to gather additional information, assess the conditions described in the first two Fontaine service bulletins and conduct testing of the Ultra LT 5th wheel.During the investigation ODI sent Fontaine an Information Request (IR) letter to gather information about the subject component as well as peer 5th wheels manufactured by Fontaine.Prior to the IR due date, Fontaine decided to conduct safety recall 15E-066.With this recall, Fontaine requested relief f
Investigation Documents
For Latest Documents related to this Investigation, visit the NHTSA Website.
Click the (+) Plus Sign
Then click Associated Document(s).
- 【Extensive Compatibility】HD601 heavy duty truck scanner...
- 【 Full System Diagnostic】HD601 Diesel Scanner supports...
- 【Enhanced Diesel OBD Scanner】The HD601 Diesel OBD...
- 【DTC Library】+【Life Time Free Update】The built-in...
- 【Friendly Design, Easy of Use】This scanner is plug and...
- 【Wide Compatibility】HD430 supports 12V 24V trucks...
- 【 D.P.F Regen For Cunmmis & Caterpillar】HD430 supports...
- 【Diesel Full System Diagnostic Tool】HD430 has excellent...
- 【Enhanced Diesel & Gasoline Scanner】HD430 has full HD...
- 【Advanced Hardware & Design】4.3-inch screen, 8G memory...
Search NHTSA Database for Recalls
Search NHTSA Database for (TSB's) Technical Service Bulletins
Technical Service Bulletins TSB's List
Previous Investigation | Next Investigation |
- CEL Doctor: The ANCEL AD310 is one of the best-selling OBD II scanners on the market and is recommended by Scotty Kilmer, a YouTuber and auto mechanic. It can easily determine the cause of the check engine light coming on. After repairing the vehicle's problems, it can quickly read and clear diagnostic trouble codes of emission system, read live data & hard memory data, view freeze frame, I/M monitor readiness and collect vehicle information.
- Sturdy and Compact: Equipped with a 2.5 foot cable made of very thick, flexible insulation. It is important to have a sturdy scanner as it can easily fall to the ground when working in a car. The AD310 OBD2 scanner is a well-constructed mechanic tool with a sleek design. It weighs 12 ounces and measures 8.9 x 6.9 x 1.4 inches. Thanks to its compact design and light weight, transporting the device is not a problem. The buttons are clearly labelled and the screen is large and displays results clearly.
- Accurate Fast and Easy to Use: The AD310 scanner can help you or your mechanic understand if your car is in good condition, provides exceptionally accurate and fast results, reads and clears engine trouble emission codes in seconds after you fixed the problem. This device will let you know immediately and fix the problem right away without any car knowledge. No need for batteries or a charger, get power directly from the OBDII Data Link Connector in your vehicle.
- OBDII Protocols and Car Compatibility: Many cheap scan tools do not really support all OBD2 protocols. AD310 scanner as it can support all OBDII protocols such as KWP2000, J1850 VPW, ISO9141, J1850 PWM and CAN. This device also has extensive vehicle compatibility with 1996 US-based, 2000 EU-based and Asian cars, light trucks, SUVs, as well as newer OBD2 and CAN vehicles both domestic and foreign. Pls confirm with our customer service whether it is compatible with your vehicle before purchasing.
- Home Necessity and Worthy to Own: This is an excellent code reader to travel or home with as it weighs less and it is compact in design. You can easily slide it in your backpack as you head to the garage, or put it on the dashboard, this will be a great fit for you. The AD310 is not only portable, but also accurate and fast in performance. Moreover, it covers various car brands and is suitable for people who just need a code reader to check their car.
- Multi-Functions - Practical Multi-Functions OBD2 code reader features built-in OBD2 DTC lookup library, which help you to determine the cause of the engine light, read code, erase code, view freeze frame, I/M ready, vehicle information, data flow, real-time curve, get vehicle speed information, calculate load value, engine coolant temperature, get engine speed.
- Wide Capability - Supports 9 protocols compatible with most 1996 US-Based, 2000 EU-Based and Asian cars, and newer OBD II & CAN domestic or import vehicles. Supports 6 languages - English,German, Dutch, Spanish, French, Italian.
- 2.8" LCD Display - Designed with a clear display 2.8" Large LCD screen - white backlight and contrast adjustment. No need any battery or charger, OBD reader gets the power directly from your vehicle through the OBDII Data Link Connector.
- Compact Design - Car diagnostic scanner is equipped with a 2.5 feet long cable and made of a very thick flexible insulator.There are 6 buttons on OBD2 Scanner:scroll up/down,enter/exit and buttons that quick query VIN vehicle number& the DTC fault code.
- ABS / Airbag codes NOT Supported - It is able to read and clear check engine information which is part of OBDII system, but it cannot work with non-OBDII systems, including ABS / Airbag / Oil Service Light, etc.
- 【Your Personal CEL Doctor – Read & Clear Engine Codes】The NT301 OBD2 scanner lets you read diagnostic trouble codes (DTCs), check em-issions readiness, turn off your Check Engine Light (CEL) or MIL, reset monitors, and view live data streams. It retrieves your vehicle's VIN instantly. Like all standard OBD2 scanners, it clears codes only after repairs are completed—if the issue persists, the code will return. Designed for DIYers who want to understand what’s really going on under the hood.
- 【Easy Code Reading – Just Plug & Play】Simply plug into the OBD2 port, turn the ignition to “ON” (engine off), and select the correct menu: Select OBDII-> Wait for seconds-> Select Read codes. For accurate results, ensure your vehicle is compatible and the OBD2 port is free from damage or wiring issues. No batteries needed— powered directly by your car.
- 【Live Data Graphing & Accuracy for Most OBD2 Vehicles】View and log live sensor data in graph form—monitor oxygen sensors, fuel trims, coolant temp, RPM, and more. Spot trends and suspicious values in real time. Compatible with most 1996+ gasoline cars, light trucks, and SUVs sold in the U.S., as well as many 2000+ European and Asian models. Also works on 12V diesel vehicles equipped with OBD2.
- 【S-mog Check Helper – Know Your Readiness Status at a Glance】With dedicated I/M readiness hotkeys and a simple Red-Yellow-Green LED indicator, you’ll instantly know if your vehicle is ready for em-issions testing. Built-in speaker provides audio feedback. No guesswork—just confidence before you head to the test center.
- 【A Must-Have Tool for Every Home Mechanic】Compact, rugged, and ready to use right out of the box. The 2.8” color screen is easy to read, even in daylight. No charging or setup required—just plug into the 16-pin DLC and start diagnosing. Recommended by professional mechanics on YouTube and trusted by DIYers worldwide.
Last update on 2026-03-23 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.