Date: 2019-08-06
Subaru of America, Inc.
NHTSA Action Number: PE19009
Components: AIR BAGS:FRONTAL
Subject: Occupant Detection System (ODS) Failure
Opened From: 2019-08-06 - 2020-01-22
NHTSA Recall Number: 19V701
Summary
The Office of Defects Investigation (ODI) opened PE19-009 to investigate 51 complaints and additional Early Warning Report (EWR) data related to allegations of front passenger seat Occupant Detection System (ODS) malfunctions in model year (MY) 2016 through 2018 Subaru Forester vehicles. These vehicles use a capacitive type ODS, which is intended to classify the occupant of the passenger seat as either full-sized, small stature, a child seat or other object. The complaints reported the ODS failed to operate properly, the SRS (Supplemental Restraint System) warning light illuminated, and/or the ODS incorrectly suppressed (turned off) the front passenger air bag when the seat was occupied by a full-sized passenger. In a frontal crash that is sufficient to warrant deployment, a suppressed air bag may increase the risk of injury to the occupant of the seat.On August 14, 2019 ODI sent an Information Request (IR) to Subaru requesting information on the subject vehicles and MY 2014-2015 Subaru Forester vehicles.On October 3, 2019, Subaru submitted a Defect Information Report (DIR) to NHTSA describing a safety defect in the passenger-side front airbag Occupant Detection System (ODS) harness of 366,282 MY 2015-2018 Subaru Forester vehicles equipped with seat heaters.The DIR stated that over time, due to a decrease in contact pressure between the terminals in the ODS sensor mat harness, a temporarily unstable electrical connection may be possible. If the connection is temporarily unstable, the ODS may not properly determine the status of the right front seat occupant. If the ODS is unable to correctly determine the status of the front occupant, the airbag warning light may illuminate, and the front passenger airbag may deactivate even though the seat is occupied, increasing the risk of injury to the front passenger in the event of a crash.Using vehicle production data and field occurrence frequency, Subaru determined the potentially affected vehicle production range to be between January 20, 2015 ?and August 1, 2017.In addition, Subaru indicated that over 99 percent of the related MY 2015-2018 field reports with vehicles in the production range involved vehicles with seat heaters.NHTSA's analysis of complaint and warranty claim data showed 1,440 of the complaints and 11,672 of the claims involve vehicles with seat heaters that were built within the production range covered by Subaru's recall.In addition, NHTSA's analysis showed a complaint rate of 393.1 per hundred thousand vehicles for the recalled population and 89.0 for MY 2014 through 2018 vehicles that are not included in the recall. Analysis of warranty claim data found a claim rate of 3.2 percent for the recalled population and 0.3 percent for MY 2014 through 2018 vehicles that are not included in the recall.Subaru will instruct owners with Subaru Forester vehicles produced in the affected vehicle production range, to bring their vehicles to a dealer to have the sensor mat harness, inspected and replaced with a new part, including the seat cushion assembly, if necessary.Based on ODI's analysis, the actions taken by Subaru mitigate any unreasonable risk to safety posed by ODS sensor mat failures in the subject vehicles. For subject and peer vehicles outside the recall population and those equipped without seat heaters, ODI's analysis indicates that there is currently no safety-related defect trend. Given these circumstances, further use of the agency resources in this matter does not appear to be warranted. Accordingly, this investigation is closed.
Investigation Documents
For Latest Documents related to this Investigation, visit the NHTSA Website.
Click the (+) Plus Sign
Then click Associated Document(s).
Search NHTSA Database for Recalls
Search NHTSA Database for (TSB's) Technical Service Bulletins
Technical Service Bulletins TSB's List
Previous Investigation | Next Investigation |
- CEL Doctor: The ANCEL AD310 is one of the best-selling OBD II scanners on the market and is recommended by Scotty Kilmer, a YouTuber and auto mechanic. It can easily determine the cause of the check engine light coming on. After repairing the vehicle's problems, it can quickly read and clear diagnostic trouble codes of emission system, read live data & hard memory data, view freeze frame, I/M monitor readiness and collect vehicle information.
- Sturdy and Compact: Equipped with a 2.5 foot cable made of very thick, flexible insulation. It is important to have a sturdy scanner as it can easily fall to the ground when working in a car. The AD310 OBD2 scanner is a well-constructed mechanic tool with a sleek design. It weighs 12 ounces and measures 8.9 x 6.9 x 1.4 inches. Thanks to its compact design and light weight, transporting the device is not a problem. The buttons are clearly labelled and the screen is large and displays results clearly.
- Accurate Fast and Easy to Use: The AD310 scanner can help you or your mechanic understand if your car is in good condition, provides exceptionally accurate and fast results, reads and clears engine trouble emission codes in seconds after you fixed the problem. This device will let you know immediately and fix the problem right away without any car knowledge. No need for batteries or a charger, get power directly from the OBDII Data Link Connector in your vehicle.
- OBDII Protocols and Car Compatibility: Many cheap scan tools do not really support all OBD2 protocols. AD310 scanner as it can support all OBDII protocols such as KWP2000, J1850 VPW, ISO9141, J1850 PWM and CAN. This device also has extensive vehicle compatibility with 1996 US-based, 2000 EU-based and Asian cars, light trucks, SUVs, as well as newer OBD2 and CAN vehicles both domestic and foreign. Pls confirm with our customer service whether it is compatible with your vehicle before purchasing.
- Home Necessity and Worthy to Own: This is an excellent code reader to travel or home with as it weighs less and it is compact in design. You can easily slide it in your backpack as you head to the garage, or put it on the dashboard, this will be a great fit for you. The AD310 is not only portable, but also accurate and fast in performance. Moreover, it covers various car brands and is suitable for people who just need a code reader to check their car.
- Multi-Functions - Practical Multi-Functions OBD2 code reader features built-in OBD2 DTC lookup library, which help you to determine the cause of the engine light, read code, erase code, view freeze frame, I/M ready, vehicle information, data flow, real-time curve, get vehicle speed information, calculate load value, engine coolant temperature, get engine speed.
- Wide Capability - Supports 9 protocols compatible with most 1996 US-Based, 2000 EU-Based and Asian cars, and newer OBD II & CAN domestic or import vehicles. Supports 6 languages - English,German, Dutch, Spanish, French, Italian.
- 2.8" LCD Display - Designed with a clear display 2.8" Large LCD screen - white backlight and contrast adjustment. No need any battery or charger, OBD reader gets the power directly from your vehicle through the OBDII Data Link Connector.
- Compact Design - Car diagnostic scanner is equipped with a 2.5 feet long cable and made of a very thick flexible insulator.There are 6 buttons on OBD2 Scanner:scroll up/down,enter/exit and buttons that quick query VIN vehicle number& the DTC fault code.
- ABS / Airbag codes NOT Supported - It is able to read and clear check engine information which is part of OBDII system, but it cannot work with non-OBDII systems, including ABS / Airbag / Oil Service Light, etc.
- 【Your Personal CEL Doctor – Read & Clear Engine Codes】The NT301 OBD2 scanner lets you read diagnostic trouble codes (DTCs), check em-issions readiness, turn off your Check Engine Light (CEL) or MIL, reset monitors, and view live data streams. It retrieves your vehicle's VIN instantly. Like all standard OBD2 scanners, it clears codes only after repairs are completed—if the issue persists, the code will return. Designed for DIYers who want to understand what’s really going on under the hood.
- 【Easy Code Reading – Just Plug & Play】Simply plug into the OBD2 port, turn the ignition to “ON” (engine off), and select the correct menu: Select OBDII-> Wait for seconds-> Select Read codes. For accurate results, ensure your vehicle is compatible and the OBD2 port is free from damage or wiring issues. No batteries needed— powered directly by your car.
- 【Live Data Graphing & Accuracy for Most OBD2 Vehicles】View and log live sensor data in graph form—monitor oxygen sensors, fuel trims, coolant temp, RPM, and more. Spot trends and suspicious values in real time. Compatible with most 1996+ gasoline cars, light trucks, and SUVs sold in the U.S., as well as many 2000+ European and Asian models. Also works on 12V diesel vehicles equipped with OBD2.
- 【S-mog Check Helper – Know Your Readiness Status at a Glance】With dedicated I/M readiness hotkeys and a simple Red-Yellow-Green LED indicator, you’ll instantly know if your vehicle is ready for em-issions testing. Built-in speaker provides audio feedback. No guesswork—just confidence before you head to the test center.
- 【A Must-Have Tool for Every Home Mechanic】Compact, rugged, and ready to use right out of the box. The 2.8” color screen is easy to read, even in daylight. No charging or setup required—just plug into the 16-pin DLC and start diagnosing. Recommended by professional mechanics on YouTube and trusted by DIYers worldwide.
Last update on 2026-03-19 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.