Date: 2023-07-28
Tesla, Inc.
NHTSA Action Number: PE23014
Components: STEERING
Subject: Loss of steering control
Opened From: 2023-07-28 - 2024-02-05
Summary
On July 28, 2023, The Office of Defects Investigation (ODI) opened a Preliminary Evaluation (PE23-014) after receiving 12 Vehicle Owner Questionnaires (VOQs) reporting loss of steering control in model years (MY) 2023 Tesla Model 3 and Y vehicles. During PE23-014, ODI interviewed complainants, sent an Information Request (IR) letter to Tesla, and convened technical meetings with Tesla that included a joint inspection of a crashed vehicle. The investigation identified 2,388 total complaints regarding the alleged defect, including 124 complaints through VOQs and 2,264 complaints through manufacturer data. ODI is associating 1 crash to this investigation (11544655), where a driver was unable to complete a right hand turn in the intersection and hit a vehicle. This vehicle was subject to a joint inspection by ODI and Tesla. The steering rack was recovered by ODI with the consumerG??s permission. ODIG??s interviews of allegations supplied to the agency, in the form of VOQs, identified patterns of the incoming complaint traffic. Complaints allege an inability to turn the steering wheel, while other complaints allege an increase in required effort to turn the steering wheel. -?These conditions were reported to occur during the drive cycle as well as at start-up.-? Approximately one-third of complaints with a reported speed occurred at vehicle start-up or speeds less than 5 mph. Interviews with failures reported at speeds over 5 mph, half reported an inability to turn the steering wheel. A majority of complaints with a reported speed reported between 5 mph and 35 mph with approximately 1 in 10 occurring on open roads at speeds 35 mph and over. The highest reported speed regarding an alleged inability to turn the steering wheel is 75 mph. A majority of allegations reported seeing a warning message, GǣSteering assist reducedGǥ, either before, during or after the loss of steering control. A portion of drivers described their steering begin to feel GǣnotchyGǥ or GǣclickyGǥ either prior to or just after the incident. There have been multiple allegations of drivers blocking intersections and/or roadways. ODI is aware of over 50 vehicles which were allegedly towed as a result of the condition from a variety of areas including, driveways, parking lots, side of road and intersections. Multiple complaints state they were able to temporarily remedy the condition by power cycling the vehicle, but the issue reoccurred until the steering rack was replaced. Tesla supplied four steering rack part numbers on the subject vehicles. -?The investigation identified part numbers, 1044832-00-A and 1188832-00-A accounted for 2,187 of the complaints and 4 did not have original part number in the information request. ODI has upgraded PE23-014 to an Engineering Analysis (EA24-001) due to continued complaint traffic and to characterize the system conditions leading to- and stemming from- the alleged defect in vehicles supplied with steering rack part numbers 1044832-00-A and 1188832-00-A To review the ODI reports cited in the Closing Resume ODI Report Identification Number document, go to NHTSA.gov.
Investigation Documents
For Latest Documents related to this Investigation, visit the NHTSA Website.
Click the (+) Plus Sign
Then click Associated Document(s).
- COMPATIBILITY: Wall Connector is compatible with all Tesla...
- CHARGING SPEED: Up to 44 miles of range per hour of charge...
- CONVENIENCE: Indoor or outdoor installation with variable...
- CONNECTIVITY: Connecting the Wall Connector to a local Wi-Fi...
- POWER-SHARE: Power-share is ideal for locations that need to...
- UNIVERSAL COMPATIBILITY: Seamlessly transitions between NACS...
- CHARGING SPEED: Up to 44 miles of range per hour of charge...
- CONVENIENCE: Indoor or outdoor installation (by your own...
- CONNECTIVITY: Connecting the Wall Connector to a local Wi-Fi...
- POWER-SHARE: Power-share is ideal for locations that need to...
Search NHTSA Database for Recalls
Search NHTSA Database for (TSB's) Technical Service Bulletins
Technical Service Bulletins TSB's List
Previous Investigation | Next Investigation |
- CEL Doctor: The ANCEL AD310 is one of the best-selling OBD II scanners on the market and is recommended by Scotty Kilmer, a YouTuber and auto mechanic. It can easily determine the cause of the check engine light coming on. After repairing the vehicle's problems, it can quickly read and clear diagnostic trouble codes of emission system, read live data & hard memory data, view freeze frame, I/M monitor readiness and collect vehicle information.
- Sturdy and Compact: Equipped with a 2.5 foot cable made of very thick, flexible insulation. It is important to have a sturdy scanner as it can easily fall to the ground when working in a car. The AD310 OBD2 scanner is a well-constructed mechanic tool with a sleek design. It weighs 12 ounces and measures 8.9 x 6.9 x 1.4 inches. Thanks to its compact design and light weight, transporting the device is not a problem. The buttons are clearly labelled and the screen is large and displays results clearly.
- Accurate Fast and Easy to Use: The AD310 scanner can help you or your mechanic understand if your car is in good condition, provides exceptionally accurate and fast results, reads and clears engine trouble emission codes in seconds after you fixed the problem. This device will let you know immediately and fix the problem right away without any car knowledge. No need for batteries or a charger, get power directly from the OBDII Data Link Connector in your vehicle.
- OBDII Protocols and Car Compatibility: Many cheap scan tools do not really support all OBD2 protocols. AD310 scanner as it can support all OBDII protocols such as KWP2000, J1850 VPW, ISO9141, J1850 PWM and CAN. This device also has extensive vehicle compatibility with 1996 US-based, 2000 EU-based and Asian cars, light trucks, SUVs, as well as newer OBD2 and CAN vehicles both domestic and foreign. Pls confirm with our customer service whether it is compatible with your vehicle before purchasing.
- Home Necessity and Worthy to Own: This is an excellent code reader to travel or home with as it weighs less and it is compact in design. You can easily slide it in your backpack as you head to the garage, or put it on the dashboard, this will be a great fit for you. The AD310 is not only portable, but also accurate and fast in performance. Moreover, it covers various car brands and is suitable for people who just need a code reader to check their car.
- Multi-Functions - Practical Multi-Functions OBD2 code reader features built-in OBD2 DTC lookup library, which help you to determine the cause of the engine light, read code, erase code, view freeze frame, I/M ready, vehicle information, data flow, real-time curve, get vehicle speed information, calculate load value, engine coolant temperature, get engine speed.
- Wide Capability - Supports 9 protocols compatible with most 1996 US-Based, 2000 EU-Based and Asian cars, and newer OBD II & CAN domestic or import vehicles. Supports 6 languages - English,German, Dutch, Spanish, French, Italian.
- 2.8" LCD Display - Designed with a clear display 2.8" Large LCD screen - white backlight and contrast adjustment. No need any battery or charger, OBD reader gets the power directly from your vehicle through the OBDII Data Link Connector.
- Compact Design - Car diagnostic scanner is equipped with a 2.5 feet long cable and made of a very thick flexible insulator.There are 6 buttons on OBD2 Scanner:scroll up/down,enter/exit and buttons that quick query VIN vehicle number& the DTC fault code.
- ABS / Airbag codes NOT Supported - It is able to read and clear check engine information which is part of OBDII system, but it cannot work with non-OBDII systems, including ABS / Airbag / Oil Service Light, etc.
- 【Your Personal CEL Doctor – Read & Clear Engine Codes】The NT301 OBD2 scanner lets you read diagnostic trouble codes (DTCs), check em-issions readiness, turn off your Check Engine Light (CEL) or MIL, reset monitors, and view live data streams. It retrieves your vehicle's VIN instantly. Like all standard OBD2 scanners, it clears codes only after repairs are completed—if the issue persists, the code will return. Designed for DIYers who want to understand what’s really going on under the hood.
- 【Easy Code Reading – Just Plug & Play】Simply plug into the OBD2 port, turn the ignition to “ON” (engine off), and select the correct menu: Select OBDII-> Wait for seconds-> Select Read codes. For accurate results, ensure your vehicle is compatible and the OBD2 port is free from damage or wiring issues. No batteries needed— powered directly by your car.
- 【Live Data Graphing & Accuracy for Most OBD2 Vehicles】View and log live sensor data in graph form—monitor oxygen sensors, fuel trims, coolant temp, RPM, and more. Spot trends and suspicious values in real time. Compatible with most 1996+ gasoline cars, light trucks, and SUVs sold in the U.S., as well as many 2000+ European and Asian models. Also works on 12V diesel vehicles equipped with OBD2.
- 【S-mog Check Helper – Know Your Readiness Status at a Glance】With dedicated I/M readiness hotkeys and a simple Red-Yellow-Green LED indicator, you’ll instantly know if your vehicle is ready for em-issions testing. Built-in speaker provides audio feedback. No guesswork—just confidence before you head to the test center.
- 【A Must-Have Tool for Every Home Mechanic】Compact, rugged, and ready to use right out of the box. The 2.8” color screen is easy to read, even in daylight. No charging or setup required—just plug into the 16-pin DLC and start diagnosing. Recommended by professional mechanics on YouTube and trusted by DIYers worldwide.
Last update on 2026-03-19 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.