Date: 2023-11-13
Kia America, Inc.
NHTSA Action Number: PE23019
Components: ENGINE AND ENGINE COOLING:ENGINE:OIL/LUBRICATION:SEALS/GASKETS
Subject: Loss of Motive Power
Opened From: 2023-11-13 - 2024-07-23
Summary
On November 13, 2023, the Office of Defects Investigation (ODI) opened a Preliminary Evaluation (PE23-019) to investigate allegations of loss of motive power relating to head gasket and/or head bolt failure in Model Year (MY) 2016-2017 Kia Sorento vehicles equipped with the 3.3 L Lambda II engine. When the investigation was opened, ODI had received 13 Vehicle Owner Questionnaires (VOQs) related to reports of loss of motive power. In an information request letter dated November 30, 2023, ODI requested technical information and failure data relating to the alleged defect in the subject MY 2016-2017 Kia Sorento as well as several peer vehicle populations which share the 3.3 L engine. In its February 26, 2024, response to ODIG??s information request, Kia provided 2022 customer complaints (including techline and field reports) and 1738 warranty claims representing 2411 unique vehicles within the subject vehicle population. Of the customer complaints provided by Kia, they identified only 53 unique allegations of a loss of motive power resulting from the alleged defect. Kia determined that the remaining reports were minor vehicle drivability or engine performance issues. ODI reviewed the information provided by Kia, along with additional VOQs submitted to NHTSA following the opening of the investigation. When eliminating duplicative reports across the data sources, the total number of allegations of loss of motive power relating to the alleged defect in the subject vehicles is 77, representing an incident report rate of 59 per 100,000 vehicles. The MY 2016 Kia Sorento exhibited both the highest overall complaint rate and loss of motive power report rate across all subject and peer vehicle populations, representing an incident report rate of 102 per 100,000 vehicles. Across all data sources, there are no allegations of crashes or fires relating to the alleged defect. The one injury incident reflected in the failure summary table above is related to a consumer who was reportedly burned (minor burn requiring medical attention) while attempting to remove the coolant reservoir cap following a loss of motive power event. In their response to ODI, Kia described that if the threads of a head bolt hole in the subject engine becomes damaged, the clamping force between the cylinder head and engine block can decrease in the area of the affected head bolt. KiaG??s assessment of the alleged defect is that when the failure occurs, drivers are provided with numerous warning signs prior to a potential loss of motive power event. According to Kia, potential warning signs associated with this failure include coolant leak/consumption or noticeable coolant odor, engine oil leak/consumption, engine temperature gauge rising to GǣHGǥ (hot), check engine light illuminating, engine cooling fan remaining on following the engine being shut off, HVAC system not functioning properly, unusual engine noise, difficulty starting the vehicle, and smoke/condensation emitting from the engine compartment or exhaust. Through both its review of the information provided by Kia and outreach to consumers, ODI confirmed that there is reasonable detectability present in the vast majority of occurrences of the alleged defect. To mitigate the alleged defect, Kia increased the engagement depth of the head bolt threads for all subject engines, beginning in May 2017. ODIG??s analysis of the failure data demonstrates that this corrective action correlates with a much lower incident report rate for engines produced following the change (8 per 100,000 vehicles for the MY 2018-2020 Kia Sorento). In December 2023, Kia launched extended warranty campaign WTY035 covering failures associated with the alleged defect in the subject vehicle population through 15 years or 180,000 miles, whichever comes first. Through its investigation, ODI identified the following peer vehicle populations, which were produced prior to the corrective action and exhibit failure rates comparable to the subject vehicles: MY 2014-2015 Kia Sorento, MY 2015-2016 Kia Sedona, and MY 2014-2017 Kia Cadenza equipped with the 3.3 L engine. Through discussions with ODI during the investigation, Kia decided to launch extended warranty campaign WTY039 in May 2024, which covers these peer vehicle populations through 15 years or 180,000 miles, whichever comes first. Based on analysis of the failure data indicating a low incident report rate of loss of motive power for the alleged defect, and in consideration of the warning signs which frequently occur from head gasket and/or head bolt failure in the subject engines, ODI is closing this Preliminary Evaluation. The agency reserves the right to take additional action if warranted by future circumstances. To review the reports cited in the Closing Resume ODI Report Identification Number document, go to NHTSA.gov.
Investigation Documents
For Latest Documents related to this Investigation, visit the NHTSA Website.
Click the (+) Plus Sign
Then click Associated Document(s).
- 1 GALLON ENGINE ANTIFREEZE/COOLANT: Fully compatible with...
- PROTECTS: Advanced formulation prevents rust & corrosion...
- DESIGNED FOR NORTH AMERICAN VEHICLES: Recommended for use...
- GUARANTEED: When installed as part of a complete flush and...
- 50/50 PREDILUTED FOR QUICK TOP OFFS: Already prediluted to...
- Unsurpassed freeze protection and anti-boil performance...
- Organic acid technology resists rust, scale & corrosion...
- High-quality additives protect against leaks and won’t...
- Pre-mixed orange formula is ready-to-use in a 50/50 ratio...
- 5 year/150,000 mile guarantee protects against engine...
Search NHTSA Database for Recalls
Search NHTSA Database for (TSB's) Technical Service Bulletins
Technical Service Bulletins TSB's List
Previous Investigation | Next Investigation |
- CEL Doctor: The ANCEL AD310 is one of the best-selling OBD II scanners on the market and is recommended by Scotty Kilmer, a YouTuber and auto mechanic. It can easily determine the cause of the check engine light coming on. After repairing the vehicle's problems, it can quickly read and clear diagnostic trouble codes of emission system, read live data & hard memory data, view freeze frame, I/M monitor readiness and collect vehicle information.
- Sturdy and Compact: Equipped with a 2.5 foot cable made of very thick, flexible insulation. It is important to have a sturdy scanner as it can easily fall to the ground when working in a car. The AD310 OBD2 scanner is a well-constructed mechanic tool with a sleek design. It weighs 12 ounces and measures 8.9 x 6.9 x 1.4 inches. Thanks to its compact design and light weight, transporting the device is not a problem. The buttons are clearly labelled and the screen is large and displays results clearly.
- Accurate Fast and Easy to Use: The AD310 scanner can help you or your mechanic understand if your car is in good condition, provides exceptionally accurate and fast results, reads and clears engine trouble emission codes in seconds after you fixed the problem. This device will let you know immediately and fix the problem right away without any car knowledge. No need for batteries or a charger, get power directly from the OBDII Data Link Connector in your vehicle.
- OBDII Protocols and Car Compatibility: Many cheap scan tools do not really support all OBD2 protocols. AD310 scanner as it can support all OBDII protocols such as KWP2000, J1850 VPW, ISO9141, J1850 PWM and CAN. This device also has extensive vehicle compatibility with 1996 US-based, 2000 EU-based and Asian cars, light trucks, SUVs, as well as newer OBD2 and CAN vehicles both domestic and foreign. Pls confirm with our customer service whether it is compatible with your vehicle before purchasing.
- Home Necessity and Worthy to Own: This is an excellent code reader to travel or home with as it weighs less and it is compact in design. You can easily slide it in your backpack as you head to the garage, or put it on the dashboard, this will be a great fit for you. The AD310 is not only portable, but also accurate and fast in performance. Moreover, it covers various car brands and is suitable for people who just need a code reader to check their car.
- Multi-Functions - Practical Multi-Functions OBD2 code reader features built-in OBD2 DTC lookup library, which help you to determine the cause of the engine light, read code, erase code, view freeze frame, I/M ready, vehicle information, data flow, real-time curve, get vehicle speed information, calculate load value, engine coolant temperature, get engine speed.
- Wide Capability - Supports 9 protocols compatible with most 1996 US-Based, 2000 EU-Based and Asian cars, and newer OBD II & CAN domestic or import vehicles. Supports 6 languages - English,German, Dutch, Spanish, French, Italian.
- 2.8" LCD Display - Designed with a clear display 2.8" Large LCD screen - white backlight and contrast adjustment. No need any battery or charger, OBD reader gets the power directly from your vehicle through the OBDII Data Link Connector.
- Compact Design - Car diagnostic scanner is equipped with a 2.5 feet long cable and made of a very thick flexible insulator.There are 6 buttons on OBD2 Scanner:scroll up/down,enter/exit and buttons that quick query VIN vehicle number& the DTC fault code.
- ABS / Airbag codes NOT Supported - It is able to read and clear check engine information which is part of OBDII system, but it cannot work with non-OBDII systems, including ABS / Airbag / Oil Service Light, etc.
- 【Your Personal CEL Doctor – Read & Clear Engine Codes】The NT301 OBD2 scanner lets you read diagnostic trouble codes (DTCs), check em-issions readiness, turn off your Check Engine Light (CEL) or MIL, reset monitors, and view live data streams. It retrieves your vehicle's VIN instantly. Like all standard OBD2 scanners, it clears codes only after repairs are completed—if the issue persists, the code will return. Designed for DIYers who want to understand what’s really going on under the hood.
- 【Easy Code Reading – Just Plug & Play】Simply plug into the OBD2 port, turn the ignition to “ON” (engine off), and select the correct menu: Select OBDII-> Wait for seconds-> Select Read codes. For accurate results, ensure your vehicle is compatible and the OBD2 port is free from damage or wiring issues. No batteries needed— powered directly by your car.
- 【Live Data Graphing & Accuracy for Most OBD2 Vehicles】View and log live sensor data in graph form—monitor oxygen sensors, fuel trims, coolant temp, RPM, and more. Spot trends and suspicious values in real time. Compatible with most 1996+ gasoline cars, light trucks, and SUVs sold in the U.S., as well as many 2000+ European and Asian models. Also works on 12V diesel vehicles equipped with OBD2.
- 【S-mog Check Helper – Know Your Readiness Status at a Glance】With dedicated I/M readiness hotkeys and a simple Red-Yellow-Green LED indicator, you’ll instantly know if your vehicle is ready for em-issions testing. Built-in speaker provides audio feedback. No guesswork—just confidence before you head to the test center.
- 【A Must-Have Tool for Every Home Mechanic】Compact, rugged, and ready to use right out of the box. The 2.8” color screen is easy to read, even in daylight. No charging or setup required—just plug into the 16-pin DLC and start diagnosing. Recommended by professional mechanics on YouTube and trusted by DIYers worldwide.
Last update on 2026-03-20 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.