Date: 2022-07-22
Chrysler (FCA US, LLC)
NHTSA Action Number: RQ22002
Components: ENGINE AND ENGINE COOLING:ENGINE:CRANK/CAMSHAFT POSITION SENSOR
Subject: Stall from Crankshaft\Camshaft Failure
Opened From: 2022-07-22 - 2025-06-16
Summary
On December 13, 2016, the National Highway Traffic Safety Administration (NHTSA) received recall 16V-907 from Fiat Chrysler Automobiles (FCA) that identified a safety defect involving crankshaft or camshaft sensor failures on certain 2016 Model Year Dodge Journey, Jeep Compass, and Jeep Patriot vehicles. The failure of the crankshaft or camshaft sensor may lead to a loss of motive power (LOMP) in the recalled vehicles.-? Following the receipt of recall 16V-907, the Office of Defects Investigation (ODI) received 127 vehicle ownerG??s questionnaires (VOQ), in which consumers allege experiencing crankshaft or camshaft failures on similar vehicles not included in the recall.-? On July 22, 2022, this Recall Query was opened to further assess the scope, frequency, and safety consequences of the alleged defect described in the recall. During this investigation, ODI sent two information request (IR) letters to FCA.-? The first letter was sent on August 15, 2022, and the second on July 12, 2024.-? Responses to these IR letters, that included manufacturer claim data related to the alleged defect, were received on September 26, 2022, and September 6, 2024, respectively. Analysis of ODI and FCA claim data identified two failure modes relating to intermittent crankshaft and camshaft sensor loss of signal.-? The first failure mode involves a faulty crankshaft or camshaft electrical connector, as identified in recall 16V-907. The second failure mode involves a faulty crankshaft and/or camshaft position sensor.-? Both failure modes exhibit intermittent operation of the crankshaft and/or camshaft position sensor that can result in a malfunction indicator lamp (MIL), engine stall while driving, or a no start condition. For the first failure mode, the claim data indicates that the majority of failures resulted in a LOMP and occurred on vehicles covered by recall 16V-907. For the second failure mode, the claim data indicates that the majority of failures resulted in a MIL or no start condition and occurred on vehicles manufactured prior to the vehicles covered by recall 16V-907. VOQ and claim data submitted to NHTSA, involving vehicles built outside the scope of recall 16V-907, commonly do not describe a LOMP. -?These claims typically describe experiencing symptoms such as a MIL, Diagnostic Trouble Code (DTC) associated with crank/camshaft position sensor, and subsequent visits to a dealership. A substantially smaller percentage of the complaints allege an actual LOMP ( During production, FCA implemented multiple corrective actions to address the camshaft/camshaft sensor signal issue. The last of which was a software update that occurred in February 2016 and based on the claim data, addressed the crankshaft and/or camshaft position sensor issues that were leading to MIL or no start.-? For vehicles built prior to the software update, the sensor failures were normally covered under warranty. FCAG??s assessment of the alleged defect is that the subject vehicles (not included in recall 16V-907) are not typically experiencing a LOMP when they have trouble with their crankshaft and/or camshaft position sensor and for that reason it does not represent a safety defect. -?FCA states consumers experience multiple warning signs including MIL illumination, drive quality changes, or no start conditions when a crankshaft and/or camshaft position sensor is failing. Based on ODI's analysis of the failure modes, the failure mode for vehicles not included in recall 16V-907 is unlikely to result in LOMP. The data indicates that vehicles not included in the recall experience LOMP at much lower rates than the recalled population.-? In addition, ODI is not aware of any related vehicle crashes or injuries in that time.-? Given these facts, a safety-related defect trend has not been identified at this time. -?Accordingly, this investigation is closed without action. The closing of this investigation does not constitute a finding by NHTSA that a safety-related defect does not exist. The Agency reserves the right to take additional action if warranted by future circumstances. To review the ODI reports cited in the Closing Resume ODI Report Identification Number document, go to NHTSA.gov.
Investigation Documents
For Latest Documents related to this Investigation, visit the NHTSA Website.
Click the (+) Plus Sign
Then click Associated Document(s).
- Advanced VCI Box, Industry-leading J2534 Pass-Thru...
- High-Speed OEM-Level Diagnostics & Programming: Unlock true...
- Coverage for 17 Car Brands & Ultra Reliability: Works...
- User-Friendly RLink Platform & Expert Support: TOPDON’s...
- 6.6 ft USB-C Cable & Portable Storage Case: The RLink J...
Search NHTSA Database for Recalls
Search NHTSA Database for (TSB's) Technical Service Bulletins
Technical Service Bulletins TSB's List
Previous Investigation | Next Investigation |
- CEL Doctor: The ANCEL AD310 is one of the best-selling OBD II scanners on the market and is recommended by Scotty Kilmer, a YouTuber and auto mechanic. It can easily determine the cause of the check engine light coming on. After repairing the vehicle's problems, it can quickly read and clear diagnostic trouble codes of emission system, read live data & hard memory data, view freeze frame, I/M monitor readiness and collect vehicle information.
- Sturdy and Compact: Equipped with a 2.5 foot cable made of very thick, flexible insulation. It is important to have a sturdy scanner as it can easily fall to the ground when working in a car. The AD310 OBD2 scanner is a well-constructed mechanic tool with a sleek design. It weighs 12 ounces and measures 8.9 x 6.9 x 1.4 inches. Thanks to its compact design and light weight, transporting the device is not a problem. The buttons are clearly labelled and the screen is large and displays results clearly.
- Accurate Fast and Easy to Use: The AD310 scanner can help you or your mechanic understand if your car is in good condition, provides exceptionally accurate and fast results, reads and clears engine trouble emission codes in seconds after you fixed the problem. This device will let you know immediately and fix the problem right away without any car knowledge. No need for batteries or a charger, get power directly from the OBDII Data Link Connector in your vehicle.
- OBDII Protocols and Car Compatibility: Many cheap scan tools do not really support all OBD2 protocols. AD310 scanner as it can support all OBDII protocols such as KWP2000, J1850 VPW, ISO9141, J1850 PWM and CAN. This device also has extensive vehicle compatibility with 1996 US-based, 2000 EU-based and Asian cars, light trucks, SUVs, as well as newer OBD2 and CAN vehicles both domestic and foreign. Pls confirm with our customer service whether it is compatible with your vehicle before purchasing.
- Home Necessity and Worthy to Own: This is an excellent code reader to travel or home with as it weighs less and it is compact in design. You can easily slide it in your backpack as you head to the garage, or put it on the dashboard, this will be a great fit for you. The AD310 is not only portable, but also accurate and fast in performance. Moreover, it covers various car brands and is suitable for people who just need a code reader to check their car.
- Multi-Functions - Practical Multi-Functions OBD2 code reader features built-in OBD2 DTC lookup library, which help you to determine the cause of the engine light, read code, erase code, view freeze frame, I/M ready, vehicle information, data flow, real-time curve, get vehicle speed information, calculate load value, engine coolant temperature, get engine speed.
- Wide Capability - Supports 9 protocols compatible with most 1996 US-Based, 2000 EU-Based and Asian cars, and newer OBD II & CAN domestic or import vehicles. Supports 6 languages - English,German, Dutch, Spanish, French, Italian.
- 2.8" LCD Display - Designed with a clear display 2.8" Large LCD screen - white backlight and contrast adjustment. No need any battery or charger, OBD reader gets the power directly from your vehicle through the OBDII Data Link Connector.
- Compact Design - Car diagnostic scanner is equipped with a 2.5 feet long cable and made of a very thick flexible insulator.There are 6 buttons on OBD2 Scanner:scroll up/down,enter/exit and buttons that quick query VIN vehicle number& the DTC fault code.
- ABS / Airbag codes NOT Supported - It is able to read and clear check engine information which is part of OBDII system, but it cannot work with non-OBDII systems, including ABS / Airbag / Oil Service Light, etc.
- 【Your Personal CEL Doctor – Read & Clear Engine Codes】The NT301 OBD2 scanner lets you read diagnostic trouble codes (DTCs), check em-issions readiness, turn off your Check Engine Light (CEL) or MIL, reset monitors, and view live data streams. It retrieves your vehicle's VIN instantly. Like all standard OBD2 scanners, it clears codes only after repairs are completed—if the issue persists, the code will return. Designed for DIYers who want to understand what’s really going on under the hood.
- 【Easy Code Reading – Just Plug & Play】Simply plug into the OBD2 port, turn the ignition to “ON” (engine off), and select the correct menu: Select OBDII-> Wait for seconds-> Select Read codes. For accurate results, ensure your vehicle is compatible and the OBD2 port is free from damage or wiring issues. No batteries needed— powered directly by your car.
- 【Live Data Graphing & Accuracy for Most OBD2 Vehicles】View and log live sensor data in graph form—monitor oxygen sensors, fuel trims, coolant temp, RPM, and more. Spot trends and suspicious values in real time. Compatible with most 1996+ gasoline cars, light trucks, and SUVs sold in the U.S., as well as many 2000+ European and Asian models. Also works on 12V diesel vehicles equipped with OBD2.
- 【S-mog Check Helper – Know Your Readiness Status at a Glance】With dedicated I/M readiness hotkeys and a simple Red-Yellow-Green LED indicator, you’ll instantly know if your vehicle is ready for em-issions testing. Built-in speaker provides audio feedback. No guesswork—just confidence before you head to the test center.
- 【A Must-Have Tool for Every Home Mechanic】Compact, rugged, and ready to use right out of the box. The 2.8” color screen is easy to read, even in daylight. No charging or setup required—just plug into the 16-pin DLC and start diagnosing. Recommended by professional mechanics on YouTube and trusted by DIYers worldwide.
Last update on 2026-03-20 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.