Date: 2025-06-30
Chrysler (FCA US, LLC)
NHTSA Action Number: RQ25002
Components: POWER TRAIN:SHIFT LINKAGE/CABLE/ROD
Subject: Recall 19V-293 Post Remedy Failures
Opened From: 2025-06-30 - 2025-12-12
Summary
On June 30, 2025, the Office of Defects Investigations (ODI) opened RQ25002 to investigate and review the effectiveness of Recall 19V-293. This recall was intended to address deterioration and detachment of shifter cable bushings by replacing them with an improved bushing that is less susceptible to deterioration from chemicals, oils, and solvents in MY2013-2016 Dodge Dart vehicles equipped with automatic transmissions and manufactured by Fiat Chrysler Automotive US LLC (FCA US). If the shifter cable becomes detached from the transmission, the transmission gear position may not match the driverG??s intended gear selection. This mismatch could result in unintended vehicle movement or rollaway when the driver believes the transmission is in PARK, increasing the risk of a crash and/or injury. ODI has received sixty-three (63) Vehicle Owner Questionnaires (VOQ) alleging worn or misadjusted shifter cables and/or shifter cable detachments in subject vehicles that had already received the remedy for Recall 19V-293. Complainants reported incidents of bushing deterioration and detachment, resulting in gear-selection mismatch despite the prior recall repair, raising concerns regarding the effectiveness and durability of the implemented remedy and the adequacy of the recall. ODIG??s investigation sought to determine whether the remedy used in recall 19V-293 adequately addressed the cause of the failure and whether other vehicles using the same bushing design might be affected. In response, FCA US and Dura Automotive Systems Inc. (Dura) determined that the repair for Recall 19V-293 did not sufficiently address the issue, and therefore, a safety defect exists in the subject vehicle population. As a result, FCA US and Dura initiated the following recall actions: -+-?-?-?-?-?-?-?-? Recall 25V-674 (FCA US) is intended to address MY 2013G??2016 Dodge Dart vehicles repaired under 19V-293 or otherwise equipped with suspect service parts. Remedy is under development. -+-?-?-?-?-?-?-?-? Recall 25E-065 (Dura) is intended to address the defect at the equipment level by recalling affected gearshift control cable assemblies distributed as service components. Remedy is under development. The recalls initiated by FCA US (25V-674), and Dura Automotive Systems Inc. (25E-065) were received prior to ODI sending an Information Request (IR) letter to FCA. These two recalls seem to resolve the concerns that prompted investigation RQ25002 by replacing the previously recalled and service-supplied shifter cable assembly with an improved design, currently under development. The vehicle scope concern identified in this query was addressed by the new recalls including all Model Year 2013G??2016 Dodge Dart vehicles produced and equipped with the affected shifter cable assembly. Accordingly, ODI is closing Investigation RQ25002. The agency will continue to monitor field performance and recall completion data to evaluate the effectiveness of the new remedy. ODI reserves the right to take additional action if warranted by future circumstances. To review the ODI reports cited in the Closing Resume ODI Report Identification Number document, go to NHTSA.gov.
Investigation Documents
For Latest Documents related to this Investigation, visit the NHTSA Website.
Click the (+) Plus Sign
Then click Associated Document(s).
- Advanced protection against the four main causes of engine...
- Delivers 40% stronger wear protection than industry...
- Provides 15% better deposit defense vs. industry standards...
- Up to 2.5X better heat protection vs. industry standards to...
- Engineered for excellent low-temperature flow, reducing...
- Formulated for engines with 75,000 miles or more, Valvoline...
- Delivers 20% better wear protection and 15% better sludge...
- Extra detergents safeguard against friction, corrosion and...
- Advanced friction-fighting additives help maximize...
- Provides performance benefits for high mileage, new and...
Search NHTSA Database for Recalls
Search NHTSA Database for (TSB's) Technical Service Bulletins
Technical Service Bulletins TSB's List
Previous Investigation | Next Investigation |
- CEL Doctor: The ANCEL AD310 is one of the best-selling OBD II scanners on the market and is recommended by Scotty Kilmer, a YouTuber and auto mechanic. It can easily determine the cause of the check engine light coming on. After repairing the vehicle's problems, it can quickly read and clear diagnostic trouble codes of emission system, read live data & hard memory data, view freeze frame, I/M monitor readiness and collect vehicle information.
- Sturdy and Compact: Equipped with a 2.5 foot cable made of very thick, flexible insulation. It is important to have a sturdy scanner as it can easily fall to the ground when working in a car. The AD310 OBD2 scanner is a well-constructed mechanic tool with a sleek design. It weighs 12 ounces and measures 8.9 x 6.9 x 1.4 inches. Thanks to its compact design and light weight, transporting the device is not a problem. The buttons are clearly labelled and the screen is large and displays results clearly.
- Accurate Fast and Easy to Use: The AD310 scanner can help you or your mechanic understand if your car is in good condition, provides exceptionally accurate and fast results, reads and clears engine trouble emission codes in seconds after you fixed the problem. This device will let you know immediately and fix the problem right away without any car knowledge. No need for batteries or a charger, get power directly from the OBDII Data Link Connector in your vehicle.
- OBDII Protocols and Car Compatibility: Many cheap scan tools do not really support all OBD2 protocols. AD310 scanner as it can support all OBDII protocols such as KWP2000, J1850 VPW, ISO9141, J1850 PWM and CAN. This device also has extensive vehicle compatibility with 1996 US-based, 2000 EU-based and Asian cars, light trucks, SUVs, as well as newer OBD2 and CAN vehicles both domestic and foreign. Pls confirm with our customer service whether it is compatible with your vehicle before purchasing.
- Home Necessity and Worthy to Own: This is an excellent code reader to travel or home with as it weighs less and it is compact in design. You can easily slide it in your backpack as you head to the garage, or put it on the dashboard, this will be a great fit for you. The AD310 is not only portable, but also accurate and fast in performance. Moreover, it covers various car brands and is suitable for people who just need a code reader to check their car.
- Multi-Functions - Practical Multi-Functions OBD2 code reader features built-in OBD2 DTC lookup library, which help you to determine the cause of the engine light, read code, erase code, view freeze frame, I/M ready, vehicle information, data flow, real-time curve, get vehicle speed information, calculate load value, engine coolant temperature, get engine speed.
- Wide Capability - Supports 9 protocols compatible with most 1996 US-Based, 2000 EU-Based and Asian cars, and newer OBD II & CAN domestic or import vehicles. Supports 6 languages - English,German, Dutch, Spanish, French, Italian.
- 2.8" LCD Display - Designed with a clear display 2.8" Large LCD screen - white backlight and contrast adjustment. No need any battery or charger, OBD reader gets the power directly from your vehicle through the OBDII Data Link Connector.
- Compact Design - Car diagnostic scanner is equipped with a 2.5 feet long cable and made of a very thick flexible insulator.There are 6 buttons on OBD2 Scanner:scroll up/down,enter/exit and buttons that quick query VIN vehicle number& the DTC fault code.
- ABS / Airbag codes NOT Supported - It is able to read and clear check engine information which is part of OBDII system, but it cannot work with non-OBDII systems, including ABS / Airbag / Oil Service Light, etc.
- 【Your Personal CEL Doctor – Read & Clear Engine Codes】The NT301 OBD2 scanner lets you read diagnostic trouble codes (DTCs), check em-issions readiness, turn off your Check Engine Light (CEL) or MIL, reset monitors, and view live data streams. It retrieves your vehicle's VIN instantly. Like all standard OBD2 scanners, it clears codes only after repairs are completed—if the issue persists, the code will return. Designed for DIYers who want to understand what’s really going on under the hood.
- 【Easy Code Reading – Just Plug & Play】Simply plug into the OBD2 port, turn the ignition to “ON” (engine off), and select the correct menu: Select OBDII-> Wait for seconds-> Select Read codes. For accurate results, ensure your vehicle is compatible and the OBD2 port is free from damage or wiring issues. No batteries needed— powered directly by your car.
- 【Live Data Graphing & Accuracy for Most OBD2 Vehicles】View and log live sensor data in graph form—monitor oxygen sensors, fuel trims, coolant temp, RPM, and more. Spot trends and suspicious values in real time. Compatible with most 1996+ gasoline cars, light trucks, and SUVs sold in the U.S., as well as many 2000+ European and Asian models. Also works on 12V diesel vehicles equipped with OBD2.
- 【S-mog Check Helper – Know Your Readiness Status at a Glance】With dedicated I/M readiness hotkeys and a simple Red-Yellow-Green LED indicator, you’ll instantly know if your vehicle is ready for em-issions testing. Built-in speaker provides audio feedback. No guesswork—just confidence before you head to the test center.
- 【A Must-Have Tool for Every Home Mechanic】Compact, rugged, and ready to use right out of the box. The 2.8” color screen is easy to read, even in daylight. No charging or setup required—just plug into the 16-pin DLC and start diagnosing. Recommended by professional mechanics on YouTube and trusted by DIYers worldwide.
Last update on 2026-03-20 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.