TS45-FM-2506 Service Bulletin/Repair Instructions

SERVICE BULLETIN

Subject:

MODESTY PANEL VIBRATION PROBLEM

IMPROVEMENT
Bulletin Type: FM
Bulletin No: TS45-FM-2506
PQR No: 500000007941
Rev No: 01
Ref. No: 700004765
Vehicle Model: TS45
Flat Rate Time / Code: 2 ad/sa
Date of issue: 28.08.2025
Modify Before: 28.08.2028
What to do with off coming parts:
What to do with outstanding parts of previous

revision:
☐Scrap

☐Return

☐Use with additional parts

☐On consignment

☒No off coming parts
☐Scrap

☐Return

☐Use with additional parts

☐On consignment

☒No outstanding parts
Description of the modification: It was

prepared to prevent the vibration problem

experienced in the modesty panel.
Bulletin Responsible: BURAK BERKAY AKSOY
Published & Approved By: ESİN ARISOY
SERVICE BULLETIN

SAFETY INSTRUCTIONS

1. Mechanical Requested Dress Code

WARNING:

➢ Dress properly to avoid personal injury and damage to the

vehicle

Always wear protective clothing

Do not wear any worn or loose-fitting clothing

Remove jewelry before starting to work

In case of long hair, use hairnet

The illustration on the left shows some of the correct and

incorrect clothing

✓ Sharp edged items should be avoided in order not to

scratch vehicle (i.e. belts, watches, necklace)

✓

✓

✓

✓

✓
2. Protect Seats when Mechanic Starts Working
✓ Seats, trimming, upholstery stuff and carpeting should be

protected with appropriate coverings.
3. Welding on the Chassis

a. Always disconnect the batteries (starting with the negative lead).

b. Disconnect the connectors of electrical and electronic equipment (electronic control

units, sensors and actuators) if they are less than 2 meters away from the chassis

part to be welded or the earth terminal of the welding equipment.

c. The earth terminal should never be attached to vehicle components such as engine,

axles and springs. Arcing on these parts is not permitted, because of the risk of

damage to bearings, springs, etc.

d. The earth terminal must make good contact and be placed as close as possible to

the part to be welded.

e. Plastic pipes, rubber parts and parabolic springs should be well protected against

welding spatter and temperatures higher than 70°.

f. The contact switch must not be in the accessory or contact position. The contact key

should be removed.

g. Reconnect in reversed order of disconnecting. Ensure that a good earth connection

is made between chassis, engine and cab.
SERVICE BULLETIN

INPUT PARTS;
Picture
QUANTIT

Y
No
Part No
Part Name
1
Dummy Part
Modesty Panel handle
1
2
TF201605Y
BOLT (M8x1,25x50-8,8)
2
3
BCMF06040A50Y
BOLT,M6X1X40 (TORX)
3
4
9207-193Y
BUSHING, MODESTY PANEL
3
SERVICE BULLETIN
CURRENT MODESTY PANEL
New design modesty panel

handle sent to the field.
SERVICE BULLETIN

Installation manual,
1- Drill and Thread

M6 drill should have a

diameter of 5mm.

A hole with a diameter of Ø5 mm and a depth of

45 mm shall be drilled into the part.

An M6 x 1 metric thread shall then be tapped to a

depth of 30 mm within the drilled hole.
M8x drill should have a

diameter of Ø6 mm.

A hole with a diameter of Ø6 mm and a depth of 55

mm shall be drilled into the part.

An M8 x 1,25 metric thread shall then be tapped to

a depth of 40 mm within the drilled hole.
SERVICE BULLETIN

2- Bolt fastening and torque application ( TORK 14,7 Nm)
Place the handle as shown in the figure,

and complete the bolt connections
BCMF06040A50Y Tork 10.5Nm

9207-193Y Bushing
TF201605Y Tork 25.3 Nm
SERVICE BULLETIN

Şasi no

NLTEJXB91T1000673

NLTEJXB93T1000674

NLTEJXB95T1000675

NLTEJXB97T1000676

NLTEJXB99T1000677

NLTEJXB90T1000678
OTPA

OA19231

OA19240

OA19241

OA19242

OA19243

OA19244
NLTEJXB92T1000679
OA19307
NLTEJXB99T1000680
OA19308
NLTEJXB90T1000681
OA19325
NLTEJXB92T1000682
OA19326
NLTEJXB94T1000683
OA19327
NLTEJXB96T1000684
OA19328
NLTEJXB98T1000685
OA19329
NLTEJXB9XT1000686
OA19349
NLTEJXB91T1000687
OA19372
NLTEJXB93T1000688
OA19373
NLTEJXB95T1000689
OA19437
NLTEJXB91T1000690
OA19458
NLTEJXB93T1000691
OA19459
NLTEJXB95T1000692
OA19460
NLTEJXB97T1000693
OA19461
NLTEJXB99T1000694
OA19462
NLTEJXB92T1000701
OA19491
NLTEJXB90T1000695
OA19463
NLTEJXB92T1000696
OA19464
NLTEJXB94T1000697
OA19487
NLTEJXB96T1000698
OA19488
NLTEJXB98T1000699
OA19489
NLTEJXB90T1000700
OA19490
NLTEJXB94T1000702
OA19492
NLTEJXB96T1000703
OA19552
NLTEJXB98T1000704
OA19553
NLTEJXB9XT1000705
OA19554
NLTEJXB91T1000706
OA19555
NLTEJXB93T1000707
OA19556
NLTEJXB95T1000708
OA19557
NLTEJXB97T1000709
OA19582
NLTEJXB93T1000710
OA19583
NLTEJXB95T1000711
OA19584
NLTEJXB97T1000712
OA19585
NLTEJXB99T1000713

NLTEJXB90T1000714

NLTEJXB92T1000715

NLTEJXB94T1000716

NLTEJXB96T1000717

NLTEJXB98T1000718
OA19621

OA19622

OA19623

OA19624

OA19625

OA19632
SERVICE BULLETIN

Flat Rate Time / Code: 2 ad/sa

Bestseller No. 1

ANCEL AD310 Classic Enhanced Universal OBD II Scanner Car Engine Fault Code Reader CAN Diagnostic Scan Tool, Read and Clear Error Codes for 1996 or Newer OBD2 Protocol Vehicle (Black)

CEL Doctor: The ANCEL AD310 is one of the best-selling OBD II scanners on the market and is recommended by Scotty Kilmer, a YouTuber and auto mechanic. It can easily determine the cause of the check engine light coming on. After repairing the vehicle's problems, it can quickly read and clear diagnostic trouble codes of emission system, read live data & hard memory data, view freeze frame, I/M monitor readiness and collect vehicle information.
Sturdy and Compact: Equipped with a 2.5 foot cable made of very thick, flexible insulation. It is important to have a sturdy scanner as it can easily fall to the ground when working in a car. The AD310 OBD2 scanner is a well-constructed mechanic tool with a sleek design. It weighs 12 ounces and measures 8.9 x 6.9 x 1.4 inches. Thanks to its compact design and light weight, transporting the device is not a problem. The buttons are clearly labelled and the screen is large and displays results clearly.
Accurate Fast and Easy to Use: The AD310 scanner can help you or your mechanic understand if your car is in good condition, provides exceptionally accurate and fast results, reads and clears engine trouble emission codes in seconds after you fixed the problem. This device will let you know immediately and fix the problem right away without any car knowledge. No need for batteries or a charger, get power directly from the OBDII Data Link Connector in your vehicle.
OBDII Protocols and Car Compatibility: Many cheap scan tools do not really support all OBD2 protocols. AD310 scanner as it can support all OBDII protocols such as KWP2000, J1850 VPW, ISO9141, J1850 PWM and CAN. This device also has extensive vehicle compatibility with 1996 US-based, 2000 EU-based and Asian cars, light trucks, SUVs, as well as newer OBD2 and CAN vehicles both domestic and foreign. Pls confirm with our customer service whether it is compatible with your vehicle before purchasing.
Home Necessity and Worthy to Own: This is an excellent code reader to travel or home with as it weighs less and it is compact in design. You can easily slide it in your backpack as you head to the garage, or put it on the dashboard, this will be a great fit for you. The AD310 is not only portable, but also accurate and fast in performance. Moreover, it covers various car brands and is suitable for people who just need a code reader to check their car.

Bestseller No. 2

MOTOPOWER MP69033 Car OBD2 Scanner Code Reader Engine Fault Scanner CAN Diagnostic Scan Tool for All OBD II Protocol Cars Since 1996, Yellow

Multi-Functions - Practical Multi-Functions OBD2 code reader features built-in OBD2 DTC lookup library, which help you to determine the cause of the engine light, read code, erase code, view freeze frame, I/M ready, vehicle information, data flow, real-time curve, get vehicle speed information, calculate load value, engine coolant temperature, get engine speed.
Wide Capability - Supports 9 protocols compatible with most 1996 US-Based, 2000 EU-Based and Asian cars, and newer OBD II & CAN domestic or import vehicles. Supports 6 languages - English,German, Dutch, Spanish, French, Italian.
2.8" LCD Display - Designed with a clear display 2.8" Large LCD screen - white backlight and contrast adjustment. No need any battery or charger, OBD reader gets the power directly from your vehicle through the OBDII Data Link Connector.
Compact Design - Car diagnostic scanner is equipped with a 2.5 feet long cable and made of a very thick flexible insulator.There are 6 buttons on OBD2 Scanner:scroll up/down,enter/exit and buttons that quick query VIN vehicle number& the DTC fault code.
ABS / Airbag codes NOT Supported - It is able to read and clear check engine information which is part of OBDII system, but it cannot work with non-OBDII systems, including ABS / Airbag / Oil Service Light, etc.

Bestseller No. 3

FOXWELL NT301 OBD2 Scanner Live Data Professional Mechanic OBDII Diagnostic Code Reader Tool for Check Engine Light

【Your Personal CEL Doctor – Read & Clear Engine Codes】The NT301 OBD2 scanner lets you read diagnostic trouble codes (DTCs), check em-issions readiness, turn off your Check Engine Light (CEL) or MIL, reset monitors, and view live data streams. It retrieves your vehicle's VIN instantly. Like all standard OBD2 scanners, it clears codes only after repairs are completed—if the issue persists, the code will return. Designed for DIYers who want to understand what’s really going on under the hood.
【Easy Code Reading – Just Plug & Play】Simply plug into the OBD2 port, turn the ignition to “ON” (engine off), and select the correct menu: Select OBDII-> Wait for seconds-> Select Read codes. For accurate results, ensure your vehicle is compatible and the OBD2 port is free from damage or wiring issues. No batteries needed— powered directly by your car.
【Live Data Graphing & Accuracy for Most OBD2 Vehicles】View and log live sensor data in graph form—monitor oxygen sensors, fuel trims, coolant temp, RPM, and more. Spot trends and suspicious values in real time. Compatible with most 1996+ gasoline cars, light trucks, and SUVs sold in the U.S., as well as many 2000+ European and Asian models. Also works on 12V diesel vehicles equipped with OBD2.
【S-mog Check Helper – Know Your Readiness Status at a Glance】With dedicated I/M readiness hotkeys and a simple Red-Yellow-Green LED indicator, you’ll instantly know if your vehicle is ready for em-issions testing. Built-in speaker provides audio feedback. No guesswork—just confidence before you head to the test center.
【A Must-Have Tool for Every Home Mechanic】Compact, rugged, and ready to use right out of the box. The 2.8” color screen is easy to read, even in daylight. No charging or setup required—just plug into the 16-pin DLC and start diagnosing. Recommended by professional mechanics on YouTube and trusted by DIYers worldwide.

Last update on 2026-03-27 / Affiliate links / Images from Amazon Product Advertising API

This product presentation was made with AAWP plugin.

Buffer Copy Email Facebook Flipboard Hacker News LinkedIn Messenger Mix Pinterest Print Reddit SMS Telegram Tumblr X VK WhatsApp Line Xing Threads