McLaren Artura – Starter Motor Cable Inspection
Bulletin type:
Reference number:
Campaign reference:
Attention:
Affected vehicles:
Situation:
Procedure:
Date:

Service Campaign
N/A
SCB 16 M 006
Retailer Aftersales Managers, Retailer Service Managers, Retailer Service Advisors,
Retailer Technicians, Retailer Parts Managers
McLaren Artura
Inspection of starter motor cable position
Action affected vehicles only during a service visit. Please refer to the information outlined
in this document to complete the required work
05 December 2025

This bulletin will cover:
1.
2.
3.
4.

Overview
Procedure
Warranty Information
Affected Vehicles

1. Overview
Through continuous product quality monitoring, McLaren Automotive has identified that in some McLaren Artura
vehicles, the starter motor cable may not have been fitted as per specification.
McLaren Automotive is instructing Retailers to inspect the condition of the starter motor cable and adjust the position
as needed.

Image 1: Overview of work area.

McLaren Aftersales Department

1

Template version:1.00

2. Procedure
Care Point: Only technicians who have completed the McLaren Artura Training are allowed to work on the
vehicle.

Care Point: The work required for the Service Campaign is only to be completed during a service visit.
To carry out the required check for the Service Campaign, follow the work instruction in the McLaren Service Portal
(MSP) D057122 for ‘Check and Adjust Starter Motor Harness’.
3. Warranty Information
Submit a claim to the McLaren Warranty department following completion of the work, using the details below.
Description

Repair Time

McLaren Artura – Starter Motor Cable Inspection – Check Only

0.10 Hours

McLaren Artura – Starter Motor Cable Inspection – Check and Adjustment Required

0.15 Hours

4. Affected Vehicles
Affected vehicles will be flagged in the Retailer Portal when next opening a Workshop Visit related to the vehicle.
Your Regional Aftersales Manager will also contact you with a VIN list of affected vehicles.
If you have any questions, please speak to your Regional Aftersales Manager.
Best regards,

The information contained in McLaren bulletins is for internal use only by McLaren Authorised Retailers and must not be published
on external websites or social media forums etc.
The McLaren data classification policy applies to all full time, part-time and fixed term employees of McLaren and all workers
including, contractors, consultants, suppliers, and third parties who have access to McLaren data and/or systems. This policy
includes all information held by, or on behalf of, McLaren in any form and all information systems/services used by, or used to
store data belonging to, McLaren.
All bulletins (Information/Campaign/Recall) issued by McLaren Automotive Limited (“McLaren”) are intended only for use by
technicians who have attended McLaren technical training courses. McLaren trained technicians have the equipment, tools, safety
instructions and the know how to perform the job properly and safely. McLaren bulletins are written to inform McLaren technicians
of conditions that may occur on some McLaren vehicles, or to provide information that could assist diagnosing a McLaren vehicle.
Part numbers listed in McLaren bulletins are for reference only. Always check with the parts department to verify the latest part
numbers.

McLaren Aftersales Department

2

Template version:1.00