NHTSA ID Number: 11027562
Manufacturer Communication Number: T-SB-0094-25
TSB/Document Date: 2026-01-09
Summary
Pre-Delivery Service (PDS) is a critical step in satisfying our new car customers. Customer feedback indicates the following areas deserve special attention when performing PDS: •Careful inspection for paint chips/scratches and body dents/dings. •Proper operation of electrical accessories (including interior light, clock, and radio reset). •Interior cleanliness. •Proper function of mechanical systems. The PDS process helps identify potential vehicle concerns before customer delivery. After completing the PDS process, maintain accurate PDS records by ensuring the required documents listed below are completed and recorded in accordance with Toyota Warranty Policy. •GTS+ Health Check •Completed PDS Check Sheet •Battery Charge Test Print Out •GTS+ Tire Pressure Information Customer retention and proper maintenance of vehicles are, and have always been, a major focus for Toyota. To help remind customers that regular service is essential to the proper maintenance of the vehicle, dealers are required to install a service reminder sticker before delivery. By doing this, customers will be reminded to return to your dealership for service. Your current service reminder sticker may be used. This bulletin contains the PDS procedures that apply specifically to 2026 model year Mirai vehicles. Refer to T-SB-0023-25, the universal Check Sheet that contains PDS steps that apply to all 2026 model year Toyota vehicles. To properly perform a complete PDS, you must complete all procedures contained in this TSB as well as the universal PDS Check Sheet. In addition, if the vehicle is stored for over 30 days, refer to T-SB-0009-25, Long-Term Vehicle Storage Guidelines.
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
- 【Bluetooth Connect】Hands-free Bluetooth car audio, easy...
- 【FM Radio】High-quality digital stereo FM radio, can...
- 【USB Car Radio】Car audio can be connected to your...
- 【Other Functions】Support MP3, WMA, APE, FLAC, WAV...
- 【Our Service】Note: Our car radio only supports 12V car...
- 【High Quality Car Stereo Player】- Our double din car...
- 【Double Din Car Stereo Phone Mirror Link】- Support...
- 【7 inch Double Din Car Radio With Bluetooth 5.0 and FM...
- 【Car Stereo Double Din Inputs】- USB /SD/AUX input. car...
- 【Standard Double Din Stereo with Backup Camera】- Parking...
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: T-SB-0094-25
Replacement Service Bulletin Number:
MFR Communication Date: 2025-12-17
MFR Internal Campaign ID/Software Version: T-SB-0094-25
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: UNKNOWN OR OTHER
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
T-SB-0094-25
December 17, 2025
2026 Mirai Pre-Delivery Service (PDS)
Service
Category
General
Section
Pre-Delivery Service
Market USA
Applicability
YEAR(S)
MODEL(S)
2026
Mirai
ADDITIONAL INFORMATION
Introduction
Pre-Delivery Service (PDS) is a critical step in satisfying our new car customers. Customer
feedback indicates the following areas deserve special attention when performing PDS:
Careful inspection for paint chips/scratches and body dents/dings.
Proper operation of electrical accessories (including interior light, clock, and radio reset).
Interior cleanliness.
Proper function of mechanical systems.
The PDS process helps identify potential vehicle concerns before customer delivery. After
completing the PDS process, maintain accurate PDS records by ensuring the required
documents listed below are completed and recorded in accordance with Toyota Warranty Policy.
GTS+ Health Check
Completed PDS Check Sheet
Battery Charge Test Print Out
GTS+ Tire Pressure Information
Customer retention and proper maintenance of vehicles are, and have always been, a major
focus for Toyota. To help remind customers that regular service is essential to the proper
maintenance of the vehicle, dealers are required to install a service reminder sticker before
delivery. By doing this, customers will be reminded to return to your dealership for service. Your
current service reminder sticker may be used. (See PDS Check Sheet item 7 of “Final Inspection
and Cleaning.”)
Draft - Confidential
© 2025 Toyota Motor Sales, USA
Page 1 of 13
T-SB-0094-25
December 17, 2025
Page 2 of 13
2026 Mirai Pre-Delivery Service (PDS)
Introduction (continued)
This bulletin contains the PDS procedures that apply specifically to 2026 model year
Mirai vehicles.
Refer to T-SB-0023-25, the universal Check Sheet that contains PDS steps that apply to all 2026
model year Toyota vehicles. To properly perform a complete PDS, you must complete all
procedures contained in this TSB as well as the universal PDS Check Sheet. In addition, if the
vehicle is stored for over 30 days, refer to T-SB-0009-25, Long-Term Vehicle Storage Guidelines.
Refer to the table below for a definition of terms that may be used in this bulletin.
Table 1.
TERM
ACRONYM
Conventional Vehicle
CV
A vehicle with only a gasoline engine for propulsion
Electrified Vehicle
A vehicle that utilizes a hybrid, plug-in hybrid, fuel cell, or battery
electric system for propulsion
Hybrid Electric Vehicle
HEV
Plug-in Hybrid Electric Vehicle
PHEV
BEV
Fuel Cell Electric Vehicle
FCEV
A vehicle with both a hydrogen fuel cell and an HV battery
State of Charge
SOC
The remaining capacity available in a battery
12-Volt
12V
Standard 12V battery used to power electrical systems
separate from high voltage components
High Voltage
HV
HV battery used to power the electrified vehicle
Draft - Confidential
DEFINITION
A vehicle with both a gasoline engine and an HV battery
A vehicle with both a gasoline engine and an HV battery that
can be charged externally
A vehicle with only an HV battery that can be charged externally
© 2025 Toyota Motor Sales, USA
T-SB-0094-25
December 17, 2025
Page 3 of 13
2026 Mirai Pre-Delivery Service (PDS)
Table of Contents
Warranty Policy ....................................................................................................................... 4
Warranty Information .............................................................................................................. 4
Required Tools & Equipment .................................................................................................. 4
D/C Cut Fuse Installation ........................................................................................................ 5
Front License Plate and Mounting Bracket Installation* .......................................................... 6
Front and Rear Emergency Towing Eyelet Removal and Hole Cover Installation ................... 8
Front Wheel Opening Extension Pad Installation .................................................................. 10
Installation of Rubber Body Plugs ......................................................................................... 11
Tire Pressure Warning System (TPWS) Initialization ............................................................ 12
Head Unit System Reset ....................................................................................................... 12
Dealer Contact Information for Call Dealer Head Unit Function* ........................................... 13
Navigation — Set Date & Time by GPS ................................................................................ 13
*If applicable.
Draft - Confidential
© 2025 Toyota Motor Sales, USA
T-SB-0094-25
December 17, 2025
Page 4 of 13
2026 Mirai Pre-Delivery Service (PDS)
Warranty Policy
If the need for additional repairs or adjustment is noted during PDS, the required service should
be performed under warranty. Reimbursement will be managed under the warranty policy.
The Warranty Policy and Procedures Manual requires that you maintain the completed
Check Sheet in the customer’s file. If you cannot produce a completed form for each retailed
vehicle upon TMS and/or Region/Distributor audit, the PDS payment amount will be subject
to debit.
An additional Repair Order completed in conjunction with normal PDS MUST have time
punch/flags for service. If multiple repairs are performed, separate time flags MUST be punched
for each repair.
Warranty Information
OP CODE
DESCRIPTION
MODEL
TIME
OFP
T1
T2
001013
Pre-Delivery Service (PDS)
Mirai
1.2
–
–
–
Required Tools & Equipment
REQUIRED EQUIPMENT
SUPPLIER
Techstream ADVi*
Techstream Lite
PART NUMBER
QTY
TSADVUNITECP
ADE
Techstream Lite (Green Cable)
TSLP3DLR01
1
TSLP2DLR01
*Essential SST.
NOTE
Only ONE of the Techstream units listed above is required.
GTS+ Software version 2025.04.002.02 or later is required.
Additional Techstream units may be ordered by calling Approved Dealer Equipment (ADE)
at 1-800-368-6787 or by visiting TIS – Diagnostics – Tools & Equipment – Techstream Order Portal.
Draft - Confidential
© 2025 Toyota Motor Sales, USA
T-SB-0094-25
December 17, 2025
Page 5 of 13
2026 Mirai Pre-Delivery Service (PDS)
D/C Cut Fuse Installation
Check the location of the D/C Cut No. 1 and D/C Cut No. 2 fuses (30A). They may have been
removed at the assembly plant and temporarily stored in the blank spaces of the relay block in
the engine compartment to minimize battery discharge during transportation and storage.
If the D/C Cut No. 1 and D/C Cut No. 2 fuses (30A) are still in their original location in the
relay block, proceed with performing a Health Check using GTS+.
If the D/C Cut No. 1 and D/C Cut No. 2 fuses (30A) are NOT in their original location, it is
necessary to remove the D/C Cut No. 1 and D/C Cut No. 2 fuses (30A) from the blank spaces
in the relay block and reinstall them in their original location as shown. After installation,
confirm that ALL related DTCs are cleared.
Figure 1.
1
2
3
4
5
1
Relay Block
4
Install the D/C Cut No. 1 Fuse (30A)
(Original Location)
2
Remove the D/C Cut No. 1 Fuse (30A)
(Blank Space)
5
Install the D/C Cut No. 2 Fuse (30A)
(Original Location)
3
Remove the D/C Cut No. 2 Fuse (30A)
(Blank Space)
NOTE
With the D/C Cut No. 1 and D/C Cut No. 2 fuses (30A) removed, if ANY DTCs are detected when the
ignition is turned ON during transportation, use GTS+ to clear ALL DTCs AFTER ensuring that there
are NO malfunctions.
While the vehicle is stored at the dealership, disconnect the negative (–) battery terminal to prevent
battery discharge. Refer to T-SB-0017-25, Battery Inspection and Maintenance During PDS, for
battery maintenance information.
Draft - Confidential
© 2025 Toyota Motor Sales, USA
T-SB-0094-25
December 17, 2025
Page 6 of 13
2026 Mirai Pre-Delivery Service (PDS)
Front License Plate and Mounting Bracket Installation
The front license plate bracket and two self-tapping screws are stored in the vehicle. Follow this
procedure to install the front license plate bracket and front license plate in states where it is
required by law.
1. Align attachment point “A” of the mounting
bracket with the dimples on the
radiator grille.
Figure 2.
1
- CEL Doctor: The ANCEL AD310 is one of the best-selling OBD II scanners on the market and is recommended by Scotty Kilmer, a YouTuber and auto mechanic. It can easily determine the cause of the check engine light coming on. After repairing the vehicle's problems, it can quickly read and clear diagnostic trouble codes of emission system, read live data & hard memory data, view freeze frame, I/M monitor readiness and collect vehicle information.
- Sturdy and Compact: Equipped with a 2.5 foot cable made of very thick, flexible insulation. It is important to have a sturdy scanner as it can easily fall to the ground when working in a car. The AD310 OBD2 scanner is a well-constructed mechanic tool with a sleek design. It weighs 12 ounces and measures 8.9 x 6.9 x 1.4 inches. Thanks to its compact design and light weight, transporting the device is not a problem. The buttons are clearly labelled and the screen is large and displays results clearly.
- Accurate Fast and Easy to Use: The AD310 scanner can help you or your mechanic understand if your car is in good condition, provides exceptionally accurate and fast results, reads and clears engine trouble emission codes in seconds after you fixed the problem. This device will let you know immediately and fix the problem right away without any car knowledge. No need for batteries or a charger, get power directly from the OBDII Data Link Connector in your vehicle.
- OBDII Protocols and Car Compatibility: Many cheap scan tools do not really support all OBD2 protocols. AD310 scanner as it can support all OBDII protocols such as KWP2000, J1850 VPW, ISO9141, J1850 PWM and CAN. This device also has extensive vehicle compatibility with 1996 US-based, 2000 EU-based and Asian cars, light trucks, SUVs, as well as newer OBD2 and CAN vehicles both domestic and foreign. Pls confirm with our customer service whether it is compatible with your vehicle before purchasing.
- Home Necessity and Worthy to Own: This is an excellent code reader to travel or home with as it weighs less and it is compact in design. You can easily slide it in your backpack as you head to the garage, or put it on the dashboard, this will be a great fit for you. The AD310 is not only portable, but also accurate and fast in performance. Moreover, it covers various car brands and is suitable for people who just need a code reader to check their car.
- Multi-Functions - Practical Multi-Functions OBD2 code reader features built-in OBD2 DTC lookup library, which help you to determine the cause of the engine light, read code, erase code, view freeze frame, I/M ready, vehicle information, data flow, real-time curve, get vehicle speed information, calculate load value, engine coolant temperature, get engine speed.
- Wide Capability - Supports 9 protocols compatible with most 1996 US-Based, 2000 EU-Based and Asian cars, and newer OBD II & CAN domestic or import vehicles. Supports 6 languages - English,German, Dutch, Spanish, French, Italian.
- 2.8" LCD Display - Designed with a clear display 2.8" Large LCD screen - white backlight and contrast adjustment. No need any battery or charger, OBD reader gets the power directly from your vehicle through the OBDII Data Link Connector.
- Compact Design - Car diagnostic scanner is equipped with a 2.5 feet long cable and made of a very thick flexible insulator.There are 6 buttons on OBD2 Scanner:scroll up/down,enter/exit and buttons that quick query VIN vehicle number& the DTC fault code.
- ABS / Airbag codes NOT Supported - It is able to read and clear check engine information which is part of OBDII system, but it cannot work with non-OBDII systems, including ABS / Airbag / Oil Service Light, etc.
- 【Your Personal CEL Doctor – Read & Clear Engine Codes】The NT301 OBD2 scanner lets you read diagnostic trouble codes (DTCs), check em-issions readiness, turn off your Check Engine Light (CEL) or MIL, reset monitors, and view live data streams. It retrieves your vehicle's VIN instantly. Like all standard OBD2 scanners, it clears codes only after repairs are completed—if the issue persists, the code will return. Designed for DIYers who want to understand what’s really going on under the hood.
- 【Easy Code Reading – Just Plug & Play】Simply plug into the OBD2 port, turn the ignition to “ON” (engine off), and select the correct menu: Select OBDII-> Wait for seconds-> Select Read codes. For accurate results, ensure your vehicle is compatible and the OBD2 port is free from damage or wiring issues. No batteries needed— powered directly by your car.
- 【Live Data Graphing & Accuracy for Most OBD2 Vehicles】View and log live sensor data in graph form—monitor oxygen sensors, fuel trims, coolant temp, RPM, and more. Spot trends and suspicious values in real time. Compatible with most 1996+ gasoline cars, light trucks, and SUVs sold in the U.S., as well as many 2000+ European and Asian models. Also works on 12V diesel vehicles equipped with OBD2.
- 【S-mog Check Helper – Know Your Readiness Status at a Glance】With dedicated I/M readiness hotkeys and a simple Red-Yellow-Green LED indicator, you’ll instantly know if your vehicle is ready for em-issions testing. Built-in speaker provides audio feedback. No guesswork—just confidence before you head to the test center.
- 【A Must-Have Tool for Every Home Mechanic】Compact, rugged, and ready to use right out of the box. The 2.8” color screen is easy to read, even in daylight. No charging or setup required—just plug into the 16-pin DLC and start diagnosing. Recommended by professional mechanics on YouTube and trusted by DIYers worldwide.
Last update on 2026-03-26 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.