B511925 Service Bulletin/Repair Instructions

1/9/26, 1:48 PM
51 19 25_RATTLE NOISE FROM LEFT FOOTWELL PANEL AREA
SIB 51 19 25

RATTLE NOISE FROM LEFT FOOTWELL PANEL AREA

2026-01-08

☐

☐
THIS REPAIR IS MOBILE FRIENDLY

THIS REPAIR IS REMOTE SOFTWARE UPGRADE (RSU) FRIENDLY
MODEL

E-Series

G60

G90

G99
Model Description

5 Series Sedan (all models)

M5 Sedan Plug-in Hybrid Electric Vehicle (PHEV)

M5 Touring PHEV
SITUATION

When driving vehicle over rough roads, a rattle sound emanates from the left footwell panel.
CAUSE

The Ultrasonic Camera Automated Parking (UCAP) control unit is too close to the front hood release

Bowden cable, causing them to vibrate against each other.
CORRECTION

The front hood release Bowden cable needs to be secured with felt tape in the area where it makes contact

with UCAP connector.
PROCEDURE

After verifying that the noise is being caused by the UCAP control unit contacting the front hood release

Bowden cable, please proceed as follows:

Remove driver-side side kick panel

and lower the distribution box

Identify where the Bowden cable is

contacting the UCAP connector

Mark the Bowden cable contact area

with an item such as tire chalk

Use the appropriate felt tape thickness

(1 mm, 2 mm, or 3 mm) and length to

wrap the Bowden cable in the marked

area

Tap the cable against the UCAP

connector and verify the noise is no

longer audible

Photo shows a dampening pad to highlight

and demonstrate the repair.
PARTS INFORMATION

Copyright ©2026 BMW of North America, Inc.

about:blank
1/4
1/9/26, 1:48 PM
51 19 25_RATTLE NOISE FROM LEFT FOOTWELL PANEL AREA
When applicable, to determine the part number that applies to the specific vehicle being repaired, enter the

VIN/chassis number into either ETK or AIR, this will consider the specific equipment and/or options that are

fitted to the vehicle.

Sublet – Bulk Supply Material

Part Number

51 45 2 353 024
Description

Set felt strip self-adhesive
Quantity

As needed
CLAIM INFORMATION

Covered under the terms of the BMW New Vehicle Limited Warranty for Passenger Cars and Light Trucks.

Repair Code:
5123033900
Bonnet (Hood) release lever including bowden cable

Unpleasant noises
Diagnosis

Labor Operation

51 00 001*
Description

Localizing body complaint(s) (Work time)
Labor Allowance

WT FRU
Diagnosis Worktime Flat Rate
2 FRU
Or:

00 58 500*
And, with the diagnosis above that applies to your center together with the work below that was performed.

Repair

Labor Operation

51 45 184
Description

Removing and installing trim panel for pedal assembly

(Main work)
Labor Allowance

As applicable
Or:

51 45 684
Removing and installing trim panel for pedal assembly

(Plusposition work)
As applicable
Work time to lower the distribution box, identify and mark

where the bowden cable is contacting the UCAP, and

wrapping the bowden cable at the marked area with the

appropriate felt tape thickness and length
3 FRU
And:

51 99 000*
If you are using a Main labor operation code for another repair, then use the Plusposition labor operation

code 51 45 684 instead of 51 45 184.

Work time labor operation codes 51 00 001 and 00 58 500 are not considered Main labor operations.

Sublet – Bulk Supply Materials (RO and Claim Comments Required)

Sublet Code 4
Reimbursement for the repair-related bulk supply materials

(Do not use the BMW part number for claim submission)
See the sublet

reimbursement

calculations below
Sublet reimbursement calculation for claiming the applicable repair-related bulk supply material (BMW part

number) is at the dealer net (DN) price for the proportional quantity used plus your center’s handling.

Enter this material cost in sublet and itemize the amount on the repair order and in claim comment section.
Copyright ©2026 BMW of North America, Inc.
about:blank
2/4
1/9/26, 1:48 PM
51 19 25_RATTLE NOISE FROM LEFT FOOTWELL PANEL AREA
(*) Based on which one applies to your center, please refer to SI B01 01 20 or B01 07 20 for the applicable procedure for

documenting, claiming, and explaining, on the RO and in the claim comments, your diagnosis work time (WT), job/repair

work time (WT), and the vehicle repairs your center performed, unless otherwise required by State law.
FEEDBACK REGARDING THIS BULLETIN

Technical Feedback

Warranty Feedback

Parts Feedback
To submit feedback for the technical topic of this bulletin: Submit your

feedback in the rating box at the top of this bulletin

To submit feedback for the CLAIMS section of this bulletin: Submit an IDS

ticket to the Warranty Department, or use the chat available in the

Warranty Documentation Portal

To submit feedback for the PARTS section of this bulletin: Submit an IDS

ticket to the Parts Department
Copyright ©2026 BMW of North America, Inc.

about:blank
3/4
1/9/26, 1:48 PM
51 19 25_RATTLE NOISE FROM LEFT FOOTWELL PANEL AREA
Copyright ©2026 BMW of North America, Inc.

about:blank
4/4

Bestseller No. 1

ANCEL AD310 Classic Enhanced Universal OBD II Scanner Car Engine Fault Code Reader CAN Diagnostic Scan Tool, Read and Clear Error Codes for 1996 or Newer OBD2 Protocol Vehicle (Black)

CEL Doctor: The ANCEL AD310 is one of the best-selling OBD II scanners on the market and is recommended by Scotty Kilmer, a YouTuber and auto mechanic. It can easily determine the cause of the check engine light coming on. After repairing the vehicle's problems, it can quickly read and clear diagnostic trouble codes of emission system, read live data & hard memory data, view freeze frame, I/M monitor readiness and collect vehicle information.
Sturdy and Compact: Equipped with a 2.5 foot cable made of very thick, flexible insulation. It is important to have a sturdy scanner as it can easily fall to the ground when working in a car. The AD310 OBD2 scanner is a well-constructed mechanic tool with a sleek design. It weighs 12 ounces and measures 8.9 x 6.9 x 1.4 inches. Thanks to its compact design and light weight, transporting the device is not a problem. The buttons are clearly labelled and the screen is large and displays results clearly.
Accurate Fast and Easy to Use: The AD310 scanner can help you or your mechanic understand if your car is in good condition, provides exceptionally accurate and fast results, reads and clears engine trouble emission codes in seconds after you fixed the problem. This device will let you know immediately and fix the problem right away without any car knowledge. No need for batteries or a charger, get power directly from the OBDII Data Link Connector in your vehicle.
OBDII Protocols and Car Compatibility: Many cheap scan tools do not really support all OBD2 protocols. AD310 scanner as it can support all OBDII protocols such as KWP2000, J1850 VPW, ISO9141, J1850 PWM and CAN. This device also has extensive vehicle compatibility with 1996 US-based, 2000 EU-based and Asian cars, light trucks, SUVs, as well as newer OBD2 and CAN vehicles both domestic and foreign. Pls confirm with our customer service whether it is compatible with your vehicle before purchasing.
Home Necessity and Worthy to Own: This is an excellent code reader to travel or home with as it weighs less and it is compact in design. You can easily slide it in your backpack as you head to the garage, or put it on the dashboard, this will be a great fit for you. The AD310 is not only portable, but also accurate and fast in performance. Moreover, it covers various car brands and is suitable for people who just need a code reader to check their car.

Bestseller No. 2

MOTOPOWER MP69033 Car OBD2 Scanner Code Reader Engine Fault Scanner CAN Diagnostic Scan Tool for All OBD II Protocol Cars Since 1996, Yellow

Multi-Functions - Practical Multi-Functions OBD2 code reader features built-in OBD2 DTC lookup library, which help you to determine the cause of the engine light, read code, erase code, view freeze frame, I/M ready, vehicle information, data flow, real-time curve, get vehicle speed information, calculate load value, engine coolant temperature, get engine speed.
Wide Capability - Supports 9 protocols compatible with most 1996 US-Based, 2000 EU-Based and Asian cars, and newer OBD II & CAN domestic or import vehicles. Supports 6 languages - English,German, Dutch, Spanish, French, Italian.
2.8" LCD Display - Designed with a clear display 2.8" Large LCD screen - white backlight and contrast adjustment. No need any battery or charger, OBD reader gets the power directly from your vehicle through the OBDII Data Link Connector.
Compact Design - Car diagnostic scanner is equipped with a 2.5 feet long cable and made of a very thick flexible insulator.There are 6 buttons on OBD2 Scanner:scroll up/down,enter/exit and buttons that quick query VIN vehicle number& the DTC fault code.
ABS / Airbag codes NOT Supported - It is able to read and clear check engine information which is part of OBDII system, but it cannot work with non-OBDII systems, including ABS / Airbag / Oil Service Light, etc.

Bestseller No. 3

FOXWELL NT301 OBD2 Scanner Live Data Professional Mechanic OBDII Diagnostic Code Reader Tool for Check Engine Light

【Your Personal CEL Doctor – Read & Clear Engine Codes】The NT301 OBD2 scanner lets you read diagnostic trouble codes (DTCs), check em-issions readiness, turn off your Check Engine Light (CEL) or MIL, reset monitors, and view live data streams. It retrieves your vehicle's VIN instantly. Like all standard OBD2 scanners, it clears codes only after repairs are completed—if the issue persists, the code will return. Designed for DIYers who want to understand what’s really going on under the hood.
【Easy Code Reading – Just Plug & Play】Simply plug into the OBD2 port, turn the ignition to “ON” (engine off), and select the correct menu: Select OBDII-> Wait for seconds-> Select Read codes. For accurate results, ensure your vehicle is compatible and the OBD2 port is free from damage or wiring issues. No batteries needed— powered directly by your car.
【Live Data Graphing & Accuracy for Most OBD2 Vehicles】View and log live sensor data in graph form—monitor oxygen sensors, fuel trims, coolant temp, RPM, and more. Spot trends and suspicious values in real time. Compatible with most 1996+ gasoline cars, light trucks, and SUVs sold in the U.S., as well as many 2000+ European and Asian models. Also works on 12V diesel vehicles equipped with OBD2.
【S-mog Check Helper – Know Your Readiness Status at a Glance】With dedicated I/M readiness hotkeys and a simple Red-Yellow-Green LED indicator, you’ll instantly know if your vehicle is ready for em-issions testing. Built-in speaker provides audio feedback. No guesswork—just confidence before you head to the test center.
【A Must-Have Tool for Every Home Mechanic】Compact, rugged, and ready to use right out of the box. The 2.8” color screen is easy to read, even in daylight. No charging or setup required—just plug into the 16-pin DLC and start diagnosing. Recommended by professional mechanics on YouTube and trusted by DIYers worldwide.

Last update on 2026-03-25 / Affiliate links / Images from Amazon Product Advertising API

This product presentation was made with AAWP plugin.

Buffer Copy Email Facebook Flipboard Hacker News LinkedIn Messenger Mix Pinterest Print Reddit SMS Telegram Tumblr X VK WhatsApp Line Xing Threads