NHTSA ID Number: 11027777
Manufacturer Communication Number: B652025
TSB/Document Date: 2026-01-23
Summary
After replacing the Multifunctional Display (MFD), the Central Information Display (CID) is black. Thebacklight of the CID is illuminated, and touch function does register an audible sound.
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
- 💝【Questions? We’re Here Anytime】MK808S is a...
- 🔥🔥🔥【2026 NEWLY RELEASED BI-DIRECTIONAL...
- 【28+ MOST POPULAR RESET SERVICE FOR 150 MAKES】Autel...
- 【ALL SYSTEM DIAGNOSTICS, FACTORY-LEVEL SCANNER】The...
- 【AUT0 SCAN & AUT0V1N, 10X FASTER】How much have you spent...
- 💯【Conta.ct us for Support Directly】If you met any...
- 🔥🔥🔥【2026 AUTEL FLAGSHIP MK900BT MK900-BT, NEW...
- 🚗【3000+ ACTIVE TESTS (50➡3000+), SAME AS MS...
- 🚗【40+ HOT SERVICES FOR 150 MAKES (28+➡40+)】Full...
- 🚗【OE ALL SYSTEM DIAGNOSE, AUTO SCAN 2.0: SCAN LICENSE...
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: B652025
Replacement Service Bulletin Number:
MFR Communication Date: 2026-01-15
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: ELECTRICAL SYSTEM
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
1/21/26, 3:34 PM
65 20 25_CID IS BLACK AFTER REPLACING THE MULTIFUNCTIONAL DISPLAY
SIB 65 20 25
CID IS BLACK AFTER REPLACING THE MULTIFUNCTIONAL DISPLAY
2026-01-14
This Service Information Bulletin (Revision 1) replaces SI B65 20 25 dated August 2025.
What’s New (Specific text highlighted):
Revision to Correction Section
Revision to Procedure Section
MODEL
F95 (X5 M Sports
Activity Vehicle)
G07 (X7 Sports
Activity Vehicle)
G23 (4 Series
Convertible)
G60 (5 Series Sedan)
G83 (M4 Convertible)
F96 (X6 M Sports
Activity Coupe)
G09 (BMW XM Sport
Activity Vehicle)
G26 (4 Series Gran
Coupe)
G70 (7 Series Sedan)
G87 (M2 Coupe)
G05 (X5 Sports
Activity Vehicle)
G20 (3 Series Sedan)
G06 (X6 Sports
Activity Coupe)
G22 (4 Series Coupe)
G42 (2 Series Coupe)
G45 (X3 Sports
Activity Vehicle)
G82 (M4 Coupe)
G99 (M5 Touring)
G80 (M3 Sedan)
G90 (M5 Sedan)
SITUATION
After replacing the Multifunctional Display (MFD), the Central Information Display (CID) is black. The
backlight of the CID is illuminated, and touch function does register an audible sound.
CAUSE
The replacement Multifunctional Display (MFD) is from a different supplier than the original.
CORRECTION
Update the vehicle software and add SA 8WM – “Control D” to the Vehicle Order via Conversion.
PROCEDURE
The Multifunctional Display (MFD) replacement parts are changing supplier from Continental to InnoLux. This
change in MFD hardware has a different video coding on the CID side. Due to this coding difference, the CID will be
black after replacement, even though the backlight will illuminate, and touch function gives an audible response.
When replacing the MFD due to a failure, make sure to check the information sticker on the replacement component
for the manufacturer. If the original part was Continental and the replacement part is InnoLux, the vehicle software
will need to be updated and the conversion “Replacement of display cluster in the case of replacement parts”
will need to be performed.
This conversion will add SA 8WM – “Control D” to the Vehicle Order. This change will trigger the proper video coding
for the replacement MFD version (InnoLux).
Note: The specific coding needed for this conversion to function with Head Unit 4 (HU-H4) is contained in ISTA
Version 4.57.29 and later. Make sure you use the latest ISTA version.
If the original MFD is a Continental and the replacement module is an InnoLux, perform the following steps:
1. Verify ISTA 4.57.29 (released January 13, 2026) or higher is installed at the dealership.
2. Install the replacement MFD (InnoLux) in the vehicle.
Copyright ©2026 BMW of North America, Inc.
about:blank
1/5
1/21/26, 3:34 PM
65 20 25_CID IS BLACK AFTER REPLACING THE MULTIFUNCTIONAL DISPLAY
3. In ISTA, select the conversion “Replacement of display cluster in the case of replacement parts” using the
following path:
Vehicle Management
Vehicle Modification
Conversion
“Replacement of display cluster in the case of replacement parts”
4. Perform the conversion.
ISTA will automatically reprogram and code all programmable control modules that do not have the latest software.
Connect the battery charger to the vehicle
Connect the programming system to the vehicle (ISTA 4)
Select “Replacement of display cluster in the case of replacement parts”
Determine measures plan
Accept and fully work through the measures plan with the control units to be programmed/encoded and enabled
Follow the rework list
Depending on the rework list, carry out a vehicle test and delete the fault memory if needed
After the programming has been fully completed, check the functionality of the system.
Always connect a BMW-approved battery charger/power supply (SI B04 23 10).
For information on programming and coding with ISTA, refer to Dealer Universal Portal / TIS / Technical
Documentation / Diagnostics and Programming / Programming Documentation.
PARTS INFORMATION
To determine the part number(s) that applies to the specific vehicle being repaired, enter the VIN / Chassis
number into either ETK or AIR, this will consider the specific equipment and/or options that are fitted to the
vehicle.
Part Number
Refer to ETK/AIR
Description
Multifunctional display (LHD)
Quantity
1
CLAIM INFORMATION
When required, in conjunction with an applicable covered Telematics Control Module replacement repair, is under the terms
of the BMW New Vehicle Limited Warranty for Passenger Cars and Light Trucks or the BMW Certified Pre-Owned Program.
6552001200
AIR Repair Code:
If another Repair
Code applies
Onboard monitor / control display / central information
display (CID), front (including trim cover) Permanent failure
Claim with the Repair Code for the Multifunctional Display
replacement repair that required the additional “Replacement
of display cluster in the case of replacement parts”
conversion procedure to be performed.
Obtain the flat rate unit (FRU) allowances for the following that applies.
A Covered Multifunctional Display Replacement Repair was Performed after Diagnosis
Labor Operation
65 50 210
Or:
84 10 850
And:
Description
Remove and install instrument cluster (Main Work)
Labor Allowance
As applicable
Remove and install instrument cluster (Plus Work)
As applicable
Worktime to perform the conversion “Replacement of
display cluster in the case of replacement parts”
1 FRU
Copyright ©2026 BMW of North America, Inc.
about:blank
2/5
1/21/26, 3:34 PM
65 20 25_CID IS BLACK AFTER REPLACING THE MULTIFUNCTIONAL DISPLAY
And for situation below that applies:
Vehicles without an Open Programming and Encoding Technical Campaign or Similar Repair
The vehicle is currently in the workshop for a covered Multifunctional Display Replacement Repair
Labor Operation
61 00 730
Description
Program/encode control unit(s), includes deleting the fault
memory
Labor Allowance
As applicable
Or:
The vehicle returns to your workshop with this issue several days after a covered Multifunctional Display
replacement repair was performed.
Labor
Operation
00 00 006
Or:
00 00 556
And:
61 21 528
And, as needed:
61 00 006*
Or:
00 58 500*
And:
84 99 000
And:
61 00 730
Description
Labor Allowance
Carrying out vehicle test (Main work)
As applicable
Carrying out vehicle test (Plusposition work)
As applicable
Supporting voltage of the vehicle electrical system /
recharging vehicle battery
As applicable
Carrying out vehicle diagnosis, ABL (Work time)
WT FRU
Diagnosis Worktime Flat Rate
2 FRU
Worktime to perform the conversion “Replacement of
display cluster in the case of replacement parts”
1 FRU
Program/encode control unit(s), includes deleting the fault
memory
As applicable
If you are using a Main labor code for another repair, use the Plus code labor operation 00 00 556 instead of
00 00 006, or exclude them (including 61 21 528) when the Vehicle Test is included in another repair.
Work time labor operation codes 61 00 006 and 00 58 500 are not considered Main labor operations.
Vehicle Programming and Encoding – Additional Work (RO and Claim Comments Required)
This procedure automatically reprograms and encodes any vehicle control modules that do not have the latest software Ilevel.
If one or more control modules fail during the reprogramming procedure, claim the required consequential
repair work procedures to address this issue (including performing the IRAP Control Unit Recovery first as
required, refer to the SIB in AIR) under the Repair Code in this bulletin together with the corresponding labor
operation codes and their flat rate unit (FRU) allowance(s), including the diagnosis* that applies.
Please explain the additional work procedures that were performed (The why and the what) on the repair order and in the
claim comments.
For covered repairs that address control module failures that occurred prior to performing this
reprogramming procedure, claim this work with the appliable Repair Code listed in AIR together with the
corresponding labor operation codes and their flat rate unit (FRU) allowance(s), including the diagnosis* that
applies.
BMW Group’s AIR ApplicationCopyright
Resource©2026
for Flat
RateofLabor
Codes
BMW
NorthOperation
America, Inc.
about:blank
3/5
1/21/26, 3:34 PM
65 20 25_CID IS BLACK AFTER REPLACING THE MULTIFUNCTIONAL DISPLAY
To obtain the corresponding flat rate unit (FRU) allowance information from the BMW Group AIR application
resource, start by entering the Chassis Number (last seven (7) characters of the VIN), and click on the
“Search” icon. If the “Vehicle Selection” window displays two or more model possible vehicle choices, select
the applicable Model, or enter the full VIN (17 characters) instead to proceed. Click on the “Flat Rate Units”
button and enter a flat rate labor operation code number “without spaces” in the field to the right, click on the
“Search” icon to display the corresponding listing of “Flat rate unit group details” that are available and their
corresponding FRU allowances.
(*) Based on which one applies to your center, please refer to SI B01 01 20 or B01 07 20 for the applicable procedure for
documenting, claiming, and explaining, on the RO and in the claim comments, your diagnosis work time (WT), job/repair
work time (WT), and the vehicle repairs your center performed, unless otherwise required by State law.
FEEDBACK REGARDING THIS BULLETIN
Technical Feedback
Warranty Feedback
Parts Feedback
To submit feedback for the technical topic of this bulletin: Submit your
feedback in the rating box at the top of this bulletin
To submit feedback for the CLAIMS section of this bulletin: Submit an IDS
ticket to the Warranty Department, or use the chat available in the
Warranty Documentation Portal
To submit feedback for the PARTS section of this bulletin: Submit an IDS
ticket to the Parts Department
Copyright ©2026 BMW of North America, Inc.
about:blank
4/5
1/21/26, 3:34 PM
65 20 25_CID IS BLACK AFTER REPLACING THE MULTIFUNCTIONAL DISPLAY
Copyright ©2026 BMW of North America, Inc.
about:blank
5/5
- CEL Doctor: The ANCEL AD310 is one of the best-selling OBD II scanners on the market and is recommended by Scotty Kilmer, a YouTuber and auto mechanic. It can easily determine the cause of the check engine light coming on. After repairing the vehicle's problems, it can quickly read and clear diagnostic trouble codes of emission system, read live data & hard memory data, view freeze frame, I/M monitor readiness and collect vehicle information.
- Sturdy and Compact: Equipped with a 2.5 foot cable made of very thick, flexible insulation. It is important to have a sturdy scanner as it can easily fall to the ground when working in a car. The AD310 OBD2 scanner is a well-constructed mechanic tool with a sleek design. It weighs 12 ounces and measures 8.9 x 6.9 x 1.4 inches. Thanks to its compact design and light weight, transporting the device is not a problem. The buttons are clearly labelled and the screen is large and displays results clearly.
- Accurate Fast and Easy to Use: The AD310 scanner can help you or your mechanic understand if your car is in good condition, provides exceptionally accurate and fast results, reads and clears engine trouble emission codes in seconds after you fixed the problem. This device will let you know immediately and fix the problem right away without any car knowledge. No need for batteries or a charger, get power directly from the OBDII Data Link Connector in your vehicle.
- OBDII Protocols and Car Compatibility: Many cheap scan tools do not really support all OBD2 protocols. AD310 scanner as it can support all OBDII protocols such as KWP2000, J1850 VPW, ISO9141, J1850 PWM and CAN. This device also has extensive vehicle compatibility with 1996 US-based, 2000 EU-based and Asian cars, light trucks, SUVs, as well as newer OBD2 and CAN vehicles both domestic and foreign. Pls confirm with our customer service whether it is compatible with your vehicle before purchasing.
- Home Necessity and Worthy to Own: This is an excellent code reader to travel or home with as it weighs less and it is compact in design. You can easily slide it in your backpack as you head to the garage, or put it on the dashboard, this will be a great fit for you. The AD310 is not only portable, but also accurate and fast in performance. Moreover, it covers various car brands and is suitable for people who just need a code reader to check their car.
- Multi-Functions - Practical Multi-Functions OBD2 code reader features built-in OBD2 DTC lookup library, which help you to determine the cause of the engine light, read code, erase code, view freeze frame, I/M ready, vehicle information, data flow, real-time curve, get vehicle speed information, calculate load value, engine coolant temperature, get engine speed.
- Wide Capability - Supports 9 protocols compatible with most 1996 US-Based, 2000 EU-Based and Asian cars, and newer OBD II & CAN domestic or import vehicles. Supports 6 languages - English,German, Dutch, Spanish, French, Italian.
- 2.8" LCD Display - Designed with a clear display 2.8" Large LCD screen - white backlight and contrast adjustment. No need any battery or charger, OBD reader gets the power directly from your vehicle through the OBDII Data Link Connector.
- Compact Design - Car diagnostic scanner is equipped with a 2.5 feet long cable and made of a very thick flexible insulator.There are 6 buttons on OBD2 Scanner:scroll up/down,enter/exit and buttons that quick query VIN vehicle number& the DTC fault code.
- ABS / Airbag codes NOT Supported - It is able to read and clear check engine information which is part of OBDII system, but it cannot work with non-OBDII systems, including ABS / Airbag / Oil Service Light, etc.
- 【Your Personal CEL Doctor – Read & Clear Engine Codes】The NT301 OBD2 scanner lets you read diagnostic trouble codes (DTCs), check em-issions readiness, turn off your Check Engine Light (CEL) or MIL, reset monitors, and view live data streams. It retrieves your vehicle's VIN instantly. Like all standard OBD2 scanners, it clears codes only after repairs are completed—if the issue persists, the code will return. Designed for DIYers who want to understand what’s really going on under the hood.
- 【Easy Code Reading – Just Plug & Play】Simply plug into the OBD2 port, turn the ignition to “ON” (engine off), and select the correct menu: Select OBDII-> Wait for seconds-> Select Read codes. For accurate results, ensure your vehicle is compatible and the OBD2 port is free from damage or wiring issues. No batteries needed— powered directly by your car.
- 【Live Data Graphing & Accuracy for Most OBD2 Vehicles】View and log live sensor data in graph form—monitor oxygen sensors, fuel trims, coolant temp, RPM, and more. Spot trends and suspicious values in real time. Compatible with most 1996+ gasoline cars, light trucks, and SUVs sold in the U.S., as well as many 2000+ European and Asian models. Also works on 12V diesel vehicles equipped with OBD2.
- 【S-mog Check Helper – Know Your Readiness Status at a Glance】With dedicated I/M readiness hotkeys and a simple Red-Yellow-Green LED indicator, you’ll instantly know if your vehicle is ready for em-issions testing. Built-in speaker provides audio feedback. No guesswork—just confidence before you head to the test center.
- 【A Must-Have Tool for Every Home Mechanic】Compact, rugged, and ready to use right out of the box. The 2.8” color screen is easy to read, even in daylight. No charging or setup required—just plug into the 16-pin DLC and start diagnosing. Recommended by professional mechanics on YouTube and trusted by DIYers worldwide.
Last update on 2026-03-27 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.