TSB-54-379-FTL Service Bulletin/Repair Instructions

ESC Warning Lamp and ECU Replacement
TSB-54-379-FTL
Creation Date: 2026-01-22

Engine or Vehicle Affected:
» Business Class M2-Plus

> 108SD Plus/114SD Plus

>» 108SD/114SD

» New Cascadia
Warranty applies to this described condition. See the warranty information at the end of this bulletin.

Described Condition:
Vehicles equipped with mBSP braking and ESC that show repeated DTC 1810/02 and a yellow ESC warning lamp

(ESC disabled) have a longitudinal acceleration fault.
This fault occurs when wheel speed sensor data does not match the ESC sensor during straight-line acceleration

or deceleration with no control functions active (ESC, XBR, ABS, DTC).
Replace the Electronic Control Unit (ECU) to correct this issue. Only vehicles with ABS ECUs identified in the

table 1 apply to this service bulletin. For the replacement ECU part number, see the table 1.
Table 1, Replacement of ECUs
Item | Old Part Number Description New Part

No. Number

1 WAB 400 867 185 6S6M ESC ATC WAB 400 867

0 238 0

2 | WAB 400 867 226 | 6S6M HSA ESC WAB 400 867

0 ATC 2390

3 WAB 400 867 225 6S6M ESC ATC WAB 400 867

0 PLC 238 06

4 WAB 400 867 223 4S4M ESC ATC WAB 400 867

0 PLC 2360

5 | WAB 400 867 224 | 4S4M HSA ESC WAB 400 867

0 ATC 2370

Table 1, Replacement of ECUs

Removal of the ECU

1. _ Park the vehicle on a level surface, shut down the vehicle, and apply the parking brake. Chock the tires.

2. _ Disconnect the wiring harness from the ECU.

3. _ Remove the mounting hardware to remove the ECU from its location. See ECU Removal instructions in the appropriate Workshop Manual .

Installation of the ECU

1. — Install the ECU with the appropriate mounting hardware and tighten to the manufacturer's specifications. See ECU Installation instructions
in the appropriate Workshop Manual .

2. — Connect the wiring harness to the ECU.
3. Perform the following steps;
a. _ Turn the keyswitch to the ON position and verify the ABS self-test, the ABS warning light should illuminate and then turn OFF.
b. — Program the ECU using WABCO Toolbox software. See Programming Instruction below.
C. _ Perform the ESC End-of-Line calibration procedure as outlined in the WABCO manual. Once complete, the ABS and ATC/ESC warning

indicators should illuminate when the keyswitch is in the ON position, and then turn off. For post-installation calibration, see step 70 in

the Programming Instruction below.
4. — Remove the chocks.
5. — Test the ECU.
Programming Instruction
## Note: Ensure that the software WABCO TOOLBOX is updated to the latest

version (14.6 at time of publication) or newer.
1. _ Go to the https://wabco.snapon.com/Login.aspx.
2. _ Login to the WABCO page.
3. — Select ‘Aftermarket Programming Configuration File’ See Fig. 1 and Fig. 2.
Home Support MyAccount> As Built- Contact
TOOLBOX Software Aftermarket Programming Configuration Files Retrofit Configuration File
Home / Catalog
onfiguration Fite
Hardware

11/04/2025 #121725
Fig. 1, Accessing Configuration Files in WABCO Site
Aflernarhet Programming Contiguratan o =a 8

ae rome we oe EDD

Programming Contgutaticn 1 a

Programemng Contguration F te

Price sa.00"

11/04/2025 121726
Fig. 2, Select Configuration File
4. — Enter the full VIN and old part number in both places and select ‘Find Configuration’ See Fig. 3.
Part Oetaits VIN" SKKMBWFG6TLWS 1876
AN 17 Characters
ECU Part Number Being Replaced’ 4008672250
10 Digits (4000000000)
New ECU Pan Number 4006672250
10 Digits (400:200000
2 nave reac the limitations above and confirm that this vehicle supports J1939 communications
11/04/2025 121727
Fig. 3, Finding the Configuration File
5. — Select ‘Add to shopping cart’ See Fig. 4.
11/04/2025 121728
Fig. 4, Adding the Configuration File to Shopping Cart
6. — Checkout the configuration file in the cart. See Fig. 5.
rogramming aanacaae = Shoppir at 1 Item $0.00

ation File a

Fig. 5, Checkout the Configuration File in the Cart
7. — Select ‘Billing to the Address.’ See Fig. 6.
11/04/2025 121730
Fig. 6, Billing to the Address
8. Agree to the terms and place the order, then download and save the file. Open the WABCO Toolbox and ensure it is up to date. Select

‘Aftermarket Programming’ and confirm the pop-up, then choose the downloaded file to begin programming. Review the pass/fail result. If it

passes, turn the keyswitch to the OFF position to allow the vehicle to save all the parameters correctly. See Fig. 7.
Check tor Software Updates
11/04/2025
Verity system

integrity
Display active and

(es) Meters
Aaagter

electron
Use WABCO T
Fig. 7, Verifying the Version, Download and Program
ARermartet ON & Mamtenance

Programming Manual Lookup = |

X PLUS to: a
View Diagnoste Trouble f

Code (OTC) and repair,

instructions
e ti

ACcSS mantenance

manuals and installation
sen
Access pre-populated

warranty forms for em.

to WABCO
WASCO

121731
9. — Perform a key cycle that completes a vehicle ECU sleep cycle to save the programming updated data.

Note: For issues regarding the WABCO TOOLBOX software downloading and

installation process, call WABCO at 1-855-228-3203 or email

wnacustomercare@wabco-auto.com.

Note: ESC calibration is required after the programming process is complete.

10. — The ABS ECU is now in the ESC calibration mode. Use WABCO TOOLBOX to perform the ESC calibration procedure. Complete the driving

portion of the End of Line (EOL) procedure. After approximately 100 yards of straight-line driving and then a 90 to 180 degree turn is recorded

by the ABS ECU, the stability lamp on the dash will turn off. See Fig. 8.

TOOLBOXGSS == tS

Tec Coam @eamen Use WABCO T X PLUS to: ——

Newt AES Grated C= moe View Diagnostic Trouble | vu

ume lmtegrity Code 00 ee 4

oe =

is

[— ae ©== and Access ‘coe

a Program ECUs at the Access pre-populsted

tina bebaiiasa em pbs ee SWCD

Check ftware Updates WABCO

11/04/2025 121731

Fig. 8, Verifying the Version, Download and Program

11. The ECU memory should now be clear of any faults.

12. — Perform a key cycle that completes the vehicle sleep cycle to save the calibration data.

Warranty
This procedure is warrantable only if the described condition exists and the repair is performed within the

applicable base or extended coverage warranty period. If a failure is not found, this procedure is considered
preventive and warranty does not apply.
See Table 2 for OWL VMRS codes and labor allowance information. Enter this service bulletin number in the
Service Bulletin # field.
Table 2, OWL VMRS Codes and Labor Allowance, eCascadia Vehicles
Primary Failed Part Component Code Cause Code Correction Code SRT Code Description Hours

WAB 400 867 185 0 013-011-076 51 03 330-5022A R&R ABS ECU 1

Table 2, OWL VMRS Codes and Labor Allowance, eCascadia Vehicles
Note:
REPLACE
FO7
F18
F15
F25
F16
F26
F35
F36
013-011-076
Document Number: 0000207674

Topic Publication Date: 2026-01-22

Bestseller No. 1

ANCEL AD310 Classic Enhanced Universal OBD II Scanner Car Engine Fault Code Reader CAN Diagnostic Scan Tool, Read and Clear Error Codes for 1996 or Newer OBD2 Protocol Vehicle (Black)

CEL Doctor: The ANCEL AD310 is one of the best-selling OBD II scanners on the market and is recommended by Scotty Kilmer, a YouTuber and auto mechanic. It can easily determine the cause of the check engine light coming on. After repairing the vehicle's problems, it can quickly read and clear diagnostic trouble codes of emission system, read live data & hard memory data, view freeze frame, I/M monitor readiness and collect vehicle information.
Sturdy and Compact: Equipped with a 2.5 foot cable made of very thick, flexible insulation. It is important to have a sturdy scanner as it can easily fall to the ground when working in a car. The AD310 OBD2 scanner is a well-constructed mechanic tool with a sleek design. It weighs 12 ounces and measures 8.9 x 6.9 x 1.4 inches. Thanks to its compact design and light weight, transporting the device is not a problem. The buttons are clearly labelled and the screen is large and displays results clearly.
Accurate Fast and Easy to Use: The AD310 scanner can help you or your mechanic understand if your car is in good condition, provides exceptionally accurate and fast results, reads and clears engine trouble emission codes in seconds after you fixed the problem. This device will let you know immediately and fix the problem right away without any car knowledge. No need for batteries or a charger, get power directly from the OBDII Data Link Connector in your vehicle.
OBDII Protocols and Car Compatibility: Many cheap scan tools do not really support all OBD2 protocols. AD310 scanner as it can support all OBDII protocols such as KWP2000, J1850 VPW, ISO9141, J1850 PWM and CAN. This device also has extensive vehicle compatibility with 1996 US-based, 2000 EU-based and Asian cars, light trucks, SUVs, as well as newer OBD2 and CAN vehicles both domestic and foreign. Pls confirm with our customer service whether it is compatible with your vehicle before purchasing.
Home Necessity and Worthy to Own: This is an excellent code reader to travel or home with as it weighs less and it is compact in design. You can easily slide it in your backpack as you head to the garage, or put it on the dashboard, this will be a great fit for you. The AD310 is not only portable, but also accurate and fast in performance. Moreover, it covers various car brands and is suitable for people who just need a code reader to check their car.

Bestseller No. 2

MOTOPOWER MP69033 Car OBD2 Scanner Code Reader Engine Fault Scanner CAN Diagnostic Scan Tool for All OBD II Protocol Cars Since 1996, Yellow

Multi-Functions - Practical Multi-Functions OBD2 code reader features built-in OBD2 DTC lookup library, which help you to determine the cause of the engine light, read code, erase code, view freeze frame, I/M ready, vehicle information, data flow, real-time curve, get vehicle speed information, calculate load value, engine coolant temperature, get engine speed.
Wide Capability - Supports 9 protocols compatible with most 1996 US-Based, 2000 EU-Based and Asian cars, and newer OBD II & CAN domestic or import vehicles. Supports 6 languages - English,German, Dutch, Spanish, French, Italian.
2.8" LCD Display - Designed with a clear display 2.8" Large LCD screen - white backlight and contrast adjustment. No need any battery or charger, OBD reader gets the power directly from your vehicle through the OBDII Data Link Connector.
Compact Design - Car diagnostic scanner is equipped with a 2.5 feet long cable and made of a very thick flexible insulator.There are 6 buttons on OBD2 Scanner:scroll up/down,enter/exit and buttons that quick query VIN vehicle number& the DTC fault code.
ABS / Airbag codes NOT Supported - It is able to read and clear check engine information which is part of OBDII system, but it cannot work with non-OBDII systems, including ABS / Airbag / Oil Service Light, etc.

Bestseller No. 3

FOXWELL NT301 OBD2 Scanner Live Data Professional Mechanic OBDII Diagnostic Code Reader Tool for Check Engine Light

【Your Personal CEL Doctor – Read & Clear Engine Codes】The NT301 OBD2 scanner lets you read diagnostic trouble codes (DTCs), check em-issions readiness, turn off your Check Engine Light (CEL) or MIL, reset monitors, and view live data streams. It retrieves your vehicle's VIN instantly. Like all standard OBD2 scanners, it clears codes only after repairs are completed—if the issue persists, the code will return. Designed for DIYers who want to understand what’s really going on under the hood.
【Easy Code Reading – Just Plug & Play】Simply plug into the OBD2 port, turn the ignition to “ON” (engine off), and select the correct menu: Select OBDII-> Wait for seconds-> Select Read codes. For accurate results, ensure your vehicle is compatible and the OBD2 port is free from damage or wiring issues. No batteries needed— powered directly by your car.
【Live Data Graphing & Accuracy for Most OBD2 Vehicles】View and log live sensor data in graph form—monitor oxygen sensors, fuel trims, coolant temp, RPM, and more. Spot trends and suspicious values in real time. Compatible with most 1996+ gasoline cars, light trucks, and SUVs sold in the U.S., as well as many 2000+ European and Asian models. Also works on 12V diesel vehicles equipped with OBD2.
【S-mog Check Helper – Know Your Readiness Status at a Glance】With dedicated I/M readiness hotkeys and a simple Red-Yellow-Green LED indicator, you’ll instantly know if your vehicle is ready for em-issions testing. Built-in speaker provides audio feedback. No guesswork—just confidence before you head to the test center.
【A Must-Have Tool for Every Home Mechanic】Compact, rugged, and ready to use right out of the box. The 2.8” color screen is easy to read, even in daylight. No charging or setup required—just plug into the 16-pin DLC and start diagnosing. Recommended by professional mechanics on YouTube and trusted by DIYers worldwide.

Last update on 2026-03-27 / Affiliate links / Images from Amazon Product Advertising API

This product presentation was made with AAWP plugin.

Buffer Copy Email Facebook Flipboard Hacker News LinkedIn Messenger Mix Pinterest Print Reddit SMS Telegram Tumblr X VK WhatsApp Line Xing Threads