TI-400 Service Bulletin/Repair Instructions

FLOW MAX® FAUCETS LOW WATER

FLOW TROUBLESHOOTING
CUP Paya
VuIPPERT
Purpose
This document outlines the procedures for correction restricting water flow in Flow Max Faucets.
Safety
The “CAUTION” symbol above is a sign that a safety risk is involved and may cause personal injury

and/or product or property damage if not safely adhered to and within the parameters set forth

in this manual.
Moving parts can pinch, crush, or cut. Keep clear and use caution.
Check Lists
To identify the source of low flow water pressure or faucet leakage, refer to the below checklists.
Low Flow Water Pressure Check List
1. Check for debris inside faucet cartridge, spout aerator (TI-400), nozzle head (TI-400), and water lines.

Make sure there is no debris restricting water flow.
2. Check the campground's water pressure. Safe water pressure in an RV should be 40 - 50 psi. A pressure

regulator keeps your pressure consistent, but it cannot supply the necessary force to boost water

flow. If the water pressure is low, then you may need a booster pump to supply increased water flow

through your RV.
Check the hose line. One bent hose could cause low water pressure. In this case, simply straighten the

hose to solve the pressure problem.
Check the water filter. The water filter could cause low water pressure if it is clogged and needs

replacing. The filter should be changed every six months to a year. Check filters before camping in your

RV to ensure the filter is clean.
Leaking Faucet Check List
If your faucet is leaking at the spout, base or neck it is possible the cartridge is cracked. This will require

a cartridge replacement.
If your faucet has a pin hole leak in the faucet neck, the complete faucet will need replaced.
If the faucet neck is loose, tighten it.
Rev: 01.13.26 CCD-0004351
FLOW MAX® FAUCETS LOW WATER

FLOW TROUBLESHOOTING
CUP Paya
(CN LiPPERT
Resources Required (depending on model, not all resources are needed)
* Pliers
¢ Small slotted screwdriver

» Towel or rag
« 2.5 mm hex wrench
« Adjustable wrench
Procedure
Aerator styles may differ, depending on faucet model.

» Screw-on head (Fig. 1A) see page 2.
* Pull down head (Fig. 2A) see page 3.
* Snap-in head (Fig. 3A) see page 4.
+ Internal (Fig. 4A) see page 5.
Rev: 01.13.26 CCD-0004351
FLOW MAX® FAUCETS LOW WATER

FLOW TROUBLESHOOTING
CUP Paya
(VLCTIPPERT
Screw-On Head
NOTE: The head is screwed on hand tight. With build-up of mineral deposits and debris, pliers may be

needed to remove the faucet head.
1. Remove the head by unscrewing from neck (Fig. 5).
NOTE: If pliers are needed, place a towel over the head to protect from any damage from the jaws of

the pliers.
Remove the aerator from the head.
Separate the aerator and screen.
Rinse aerator and screen under water to clean any debris or build-up.

Reattach and tighten head.
Screen
Aerator
,
NOTE: If there is a leak from the aerator when the faucet is on, it is possible that the aerator may not be

installed correctly. Remove the aerator and reinstall.
Rev: 01.13.26 CCD-0004351
FLOW MAX® FAUCETS LOW WATER

FLOW TROUBLESHOOTING
CUP Paya
CN LiPPERT
Pull-Down Head
1. Pull the nozzle down (Fig. 6) and unscrew from the connector.

NOTE: Be sure to secure the hose from retracting back into neck.
Slide the connector up to access the rubber washer/screen.
Remove the rubber washer/screen from the hose by pulling off by hand.

Rinse washer/screen under water to remove any debris or build-up.

Reattach rubber washer/screen.
Pull the connector down so the rubber washer/screen seats securely inside.

Reattach the nozzle to nozzle connector and tighten.
Nozzle
Connector
Rubber washer/screen
NOTE: If there is a leak from the aerator when the faucet is on, it is possible that the aerator may not be

installed correctly. Remove the aerator and reinstall.
Rev: 01.13.26 Page 4
CCD-0004351
FLOW MAX® FAUCETS LOW WATER

FLOW TROUBLESHOOTING
CUP Paya
(CN LiPPERT
Snap-In Head
1. Remove the aerator from the neck (Fig. 7A) with a small slotted screwdriver by placing the edge into

the tabs (Fig. 7B) gently prying the aerator from the neck.
2. Separate the aerator and screen (Fig. 7C).
3. Rinse aerator and screen under water to remove any debris or build up.
4. Reinsert aerator and screen by pressing the aerator back into the neck.
NOTE: If there is a leak from the aerator when the faucet is on, it is possible that the aerator may not be

installed correctly. Remove the aerator and reinstall.
Rev: 01.13.26 CCD-0004351
FLOW MAX® FAUCETS LOW WATER

FLOW TROUBLESHOOTING
CUP Paya
(CN LiPPERT
Internal
1. Remove the rubber plug (Fig. 8) allowing access to the set screw.

2. With 2.5 mm hex wrench loosen the set screw (Fig. 9).
__ as
Rubber Plu
3. Remove faucet handle from faucet base allowing access to the cartridge (Fig. 10).

4. Remove the trim ring by unscrewing by hand.
NOTE: Use of tools to remove trim ring should not be necessary and could cause damage to the ring.
5. Remove the cartridge retainer ring with appropriate wrench by gripping the flat spots on the ring.
6. Remove the cartridge valve.
Faucet Handle
Trim Ring —_> >

z< Cartridge Retainer Ring
Cartridge Valve
Faucet Base
Rev: 01.13.26
CCD-0004351
FLOW MAX® FAUCETS LOW WATER

FLOW TROUBLESHOOTING
CU Pea
(CN LiPPERT
7. Locate the aerator that is seated inside the faucet base (Fig. 11).
8. Remove the aerator by gently gripping the edge of the aerator with a pair of needle nose pliers.

9. Carefully rinse aerator under water to remove any debris or build up.
10. Reinsert aerator using the needle nose pliers.
NOTE: When fully inserted, the aerator will not be flush with the faucet base.
Aerator
11. Install the cartridge valve, making sure to completely seat it into the faucet base.
12. Install the cartridge retainer ring and securely tighten with an adjustable wrench.
13. Screw the trim ring into place and hand tighten only.
14. Install the faucet handle and secure with a 2.5 mm hex wrench. Replace the rubber plug.
NOTE: If there is a leak from the faucet base when the faucet is on, it is possible that the cartridge valve

may not be installed correctly. Remove the cartridge valve and reinstall.
Asa supplier of a broad array of highly-engineered components in the recreation and transportation product markets, safety, education and customer satisfaction are

our primary concerns. Should you have any questions, please do not hesitate to contact us at 432-LIPPERT (432-547-7378) or by email at customerservice@lci1.com.

Self-help tips, technical documents, product videos and a training class schedule are available at lippert.com or by downloading the LippertNOW app.
as

Rev: 01.13.26 Page 7 CCD-0004351

Bestseller No. 1

ANCEL AD310 Classic Enhanced Universal OBD II Scanner Car Engine Fault Code Reader CAN Diagnostic Scan Tool, Read and Clear Error Codes for 1996 or Newer OBD2 Protocol Vehicle (Black)

CEL Doctor: The ANCEL AD310 is one of the best-selling OBD II scanners on the market and is recommended by Scotty Kilmer, a YouTuber and auto mechanic. It can easily determine the cause of the check engine light coming on. After repairing the vehicle's problems, it can quickly read and clear diagnostic trouble codes of emission system, read live data & hard memory data, view freeze frame, I/M monitor readiness and collect vehicle information.
Sturdy and Compact: Equipped with a 2.5 foot cable made of very thick, flexible insulation. It is important to have a sturdy scanner as it can easily fall to the ground when working in a car. The AD310 OBD2 scanner is a well-constructed mechanic tool with a sleek design. It weighs 12 ounces and measures 8.9 x 6.9 x 1.4 inches. Thanks to its compact design and light weight, transporting the device is not a problem. The buttons are clearly labelled and the screen is large and displays results clearly.
Accurate Fast and Easy to Use: The AD310 scanner can help you or your mechanic understand if your car is in good condition, provides exceptionally accurate and fast results, reads and clears engine trouble emission codes in seconds after you fixed the problem. This device will let you know immediately and fix the problem right away without any car knowledge. No need for batteries or a charger, get power directly from the OBDII Data Link Connector in your vehicle.
OBDII Protocols and Car Compatibility: Many cheap scan tools do not really support all OBD2 protocols. AD310 scanner as it can support all OBDII protocols such as KWP2000, J1850 VPW, ISO9141, J1850 PWM and CAN. This device also has extensive vehicle compatibility with 1996 US-based, 2000 EU-based and Asian cars, light trucks, SUVs, as well as newer OBD2 and CAN vehicles both domestic and foreign. Pls confirm with our customer service whether it is compatible with your vehicle before purchasing.
Home Necessity and Worthy to Own: This is an excellent code reader to travel or home with as it weighs less and it is compact in design. You can easily slide it in your backpack as you head to the garage, or put it on the dashboard, this will be a great fit for you. The AD310 is not only portable, but also accurate and fast in performance. Moreover, it covers various car brands and is suitable for people who just need a code reader to check their car.

Bestseller No. 2

MOTOPOWER MP69033 Car OBD2 Scanner Code Reader Engine Fault Scanner CAN Diagnostic Scan Tool for All OBD II Protocol Cars Since 1996, Yellow

Multi-Functions - Practical Multi-Functions OBD2 code reader features built-in OBD2 DTC lookup library, which help you to determine the cause of the engine light, read code, erase code, view freeze frame, I/M ready, vehicle information, data flow, real-time curve, get vehicle speed information, calculate load value, engine coolant temperature, get engine speed.
Wide Capability - Supports 9 protocols compatible with most 1996 US-Based, 2000 EU-Based and Asian cars, and newer OBD II & CAN domestic or import vehicles. Supports 6 languages - English,German, Dutch, Spanish, French, Italian.
2.8" LCD Display - Designed with a clear display 2.8" Large LCD screen - white backlight and contrast adjustment. No need any battery or charger, OBD reader gets the power directly from your vehicle through the OBDII Data Link Connector.
Compact Design - Car diagnostic scanner is equipped with a 2.5 feet long cable and made of a very thick flexible insulator.There are 6 buttons on OBD2 Scanner:scroll up/down,enter/exit and buttons that quick query VIN vehicle number& the DTC fault code.
ABS / Airbag codes NOT Supported - It is able to read and clear check engine information which is part of OBDII system, but it cannot work with non-OBDII systems, including ABS / Airbag / Oil Service Light, etc.

Bestseller No. 3

FOXWELL NT301 OBD2 Scanner Live Data Professional Mechanic OBDII Diagnostic Code Reader Tool for Check Engine Light

【Your Personal CEL Doctor – Read & Clear Engine Codes】The NT301 OBD2 scanner lets you read diagnostic trouble codes (DTCs), check em-issions readiness, turn off your Check Engine Light (CEL) or MIL, reset monitors, and view live data streams. It retrieves your vehicle's VIN instantly. Like all standard OBD2 scanners, it clears codes only after repairs are completed—if the issue persists, the code will return. Designed for DIYers who want to understand what’s really going on under the hood.
【Easy Code Reading – Just Plug & Play】Simply plug into the OBD2 port, turn the ignition to “ON” (engine off), and select the correct menu: Select OBDII-> Wait for seconds-> Select Read codes. For accurate results, ensure your vehicle is compatible and the OBD2 port is free from damage or wiring issues. No batteries needed— powered directly by your car.
【Live Data Graphing & Accuracy for Most OBD2 Vehicles】View and log live sensor data in graph form—monitor oxygen sensors, fuel trims, coolant temp, RPM, and more. Spot trends and suspicious values in real time. Compatible with most 1996+ gasoline cars, light trucks, and SUVs sold in the U.S., as well as many 2000+ European and Asian models. Also works on 12V diesel vehicles equipped with OBD2.
【S-mog Check Helper – Know Your Readiness Status at a Glance】With dedicated I/M readiness hotkeys and a simple Red-Yellow-Green LED indicator, you’ll instantly know if your vehicle is ready for em-issions testing. Built-in speaker provides audio feedback. No guesswork—just confidence before you head to the test center.
【A Must-Have Tool for Every Home Mechanic】Compact, rugged, and ready to use right out of the box. The 2.8” color screen is easy to read, even in daylight. No charging or setup required—just plug into the 16-pin DLC and start diagnosing. Recommended by professional mechanics on YouTube and trusted by DIYers worldwide.

Last update on 2026-03-26 / Affiliate links / Images from Amazon Product Advertising API

This product presentation was made with AAWP plugin.

Buffer Copy Email Facebook Flipboard Hacker News LinkedIn Messenger Mix Pinterest Print Reddit SMS Telegram Tumblr X VK WhatsApp Line Xing Threads