NHTSA ID Number: 11028318
Manufacturer Communication Number: 24KWE / 24PBE
TSB/Document Date: 2026-02-05
Summary
The right-hand shift stalk may have an improper wire harness terminal crimp within the wire harness connector. Loss of communication between the right-hand shift stalk and the vehicle may result in the vehicle being disabled after it comes to a stop, thereby increasing the risk of crash or injury. A warning will appear on the dash display when communication is lost, including transmission or engine warnings, “!” next to DNR/DNRP indicator, “-“ in the DNR/DNRP indicator, and/or chimes, depending upon whether you are operating a diesel/gas or battery electric vehicle.
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
- Advanced protection against the four main causes of engine...
- Delivers 40% stronger wear protection than industry...
- Provides 15% better deposit defense vs. industry standards...
- Up to 2.5X better heat protection vs. industry standards to...
- Engineered for excellent low-temperature flow, reducing...
- Formulated for engines with 75,000 miles or more, Valvoline...
- Delivers 20% better wear protection and 15% better sludge...
- Extra detergents safeguard against friction, corrosion and...
- Advanced friction-fighting additives help maximize...
- Provides performance benefits for high mileage, new and...
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: 24KWE / 24PBE
Replacement Service Bulletin Number:
MFR Communication Date: 2026-01-31
MFR Internal Campaign ID/Software Version: 24KWE / 24PBE
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: ELECTRICAL SYSTEM
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
1/30/26, 11:41 AM
Federal Recall Bulletin
24KWE: Kongsberg Automotive Right-Hand Shift Stalk
Number
Edit
Clone
24KWE NHTSA: 24V190 / Transport Canada: 2024-161
Supplier
Kongsberg Automotive
Description
Kongsberg Automotive Right-Hand Shift Stalk
Date
11/26/2025
What’s New
Safety Recall
The right-hand shift stalk may have an improper wire harness terminal crimp within the wire harness
connector. Loss of communication between the right-hand shift stalk and the vehicle may result in the
vehicle being disabled after it comes to a stop, thereby increasing the risk of crash or injury. A warning
will appear on the dash display when communication is lost, including transmission or engine warnings,
“!” next to DNR/DNRP indicator, “-“ in the DNR/DNRP indicator, and/or chimes, depending upon whether
you are operating a diesel/gas or battery electric vehicle.
Introduction
Safety Recall
The right-hand shift stalk may have an improper wire harness terminal crimp within the wire harness
connector. Loss of communication between the right-hand shift stalk and the vehicle may result in the
vehicle being disabled after it comes to a stop, thereby increasing the risk of crash or injury. A warning
will appear on the dash display when communication is lost, including transmission or engine warnings,
1/8
1/30/26, 11:41 AM
Federal Recall Bulletin
“!” next to DNR/DNRP indicator, “-“ in the DNR/DNRP indicator, and/or chimes, depending upon whether
you are operating a diesel/gas or battery electric vehicle.
Situation
40,884 (38,130 US and 2,754 CAN) vehicle model year 2021-2025, T180, T280, T380, T480, T680,
T880, and W990 chassis built from 12/07/2020 through 12/23/2022 with right-hand shift stalk part
numbers Q21-6155-211, Q21-6155-213, Q21-6155-214, Q21-6164-111, or Q21-6165-113.
Resolution
Service all chassis affected that enter your dealership, even if the customer has no issue with the
chassis.
1. Review the attached chassis list for your dealer code and schedule your customer(s) for service if
their chassis is on the list.
2. In Service Management, select campaign 24KWE to add it to the case. If the unit is released back
into service without performing the repair, make sure to also release the campaign in Service
Management.
3. If you are not using Service Management to start repair orders, review SIR for Complete next to the
24KWE campaign code prior to performing this repair.
4. Follow the procedures in the Links section below to inspect the right-hand shift stalk and replace as
necessary.
Federal Law
It is a violation of Federal law for a dealer to sell or lease new vehicles covered by this recall until the defect or
noncompliance has been corrected.
Warranty
Starting on 11/26/2025, Kenworth will pay for parts at dealer net plus applicable mark-up and labor:
Once the upper and lower steering column covers are removed, you MUST take a CLEAR photo of
the part label showing the model and serial numbers of the old part. This is required to be attached
2/8
1/30/26, 11:41 AM
Federal Recall Bulletin
to the Claim Unit for reimbursement consideration. Claims filed without this photo may be denied.
NOTE
ealers submitting
D
Recommended Repairs
through their business
systems may see the warning
message
"CausalPartModelNumber and
CausalPartSerialNumber are
required". Claim files will still
be created.
Until dealer business systems are updated, claims must be completed in PRWS by providing the
following required information.
The following items are required:
Causal Part Model Number
Causal Part Serial Number
Photos requested
All Chassis Models: No Replacement Needed
0.3 hours to inspect the right-hand shift stalk for the affected part number per bulletin procedure.
No replacement needed. Attach connector photos to the claim. Use Recommended Repair Code
24KWEA.
For T680, T880, and W990 Chassis with New Shift Stalk Part Number: Q21-6124-211
0.5 hours to inspect the right-hand shift stalk for the affected part number, remove and replace
(R&R) shift stalk with part number Q21-6124-211, attach connector photos, and dispose of the old
shift stalk per bulletin procedures. Use Recommended Repair Code 24KWEB.
For T680 and T880 chassis with New Shift Stalk Part Numbers: Q21-6124-213 and Q21-6124-214
0.5 hours to inspect the right-hand shift stalk for the affected part number, R&R shift stalk with part
number Q21-6124-213, attach connector photos, and dispose of the old shift stalk per bulletin
procedures. Use Recommended Repair Code 24KWEC.
0.5 hours to inspect the right-hand shift stalk for the affected part number, R&R shift stalk with part
number Q21-6124-214, attach connector photos, and dispose of the old shift stalk per bulletin
procedures. Use Recommended Repair Code 24KWED.
For T180, T280, T380 and T480 Chassis with New Shift Stalk Part Numbers: Q21-6124-216, Q216124-217, and Q21-6124-213
0.4 hours to inspect the right-hand shift stalk for the affected part number, R&R shift stalk with part
number Q21-6124-216, attach connector photos, and dispose of the old shift stalk per bulletin
3/8
1/30/26, 11:41 AM
Federal Recall Bulletin
procedures. Use Recommended Repair Code 24KWEE.
0.4 hours to inspect the right-hand shift stalk for the affected part number, R&R shift stalk with part
number Q21-6124-217, attach connector photos, and dispose of the old shift stalk per bulletin
procedures. Use Recommended Repair Code 24KWEF.
0.4 hours to inspect the right-hand shift stalk for the affected part number, R&R shift stalk with part
number Q21-6124-213, attach connector photos, and dispose of the old shift stalk per bulletin
procedures. Use Recommended Repair Code 24KWEG.
You must enter all the following information from the as-installed right-hand shift stalk into
the warranty claim:
Serial number into the Causal Part Serial Number field
Model number into the Causal Part Model Number field
Right-hand shift stalk part/serial number label
File an additional claim for extraordinary circumstances. A recommended repair for standard labor
must be filed first.
File the claim within 14 days in accordance with the Warranty Policy.
Take-Off Parts Disposition:
The take-off shift stalk must be destroyed per the steps in the repair procedures.
Dealers are required to certify under penalty of perjury that they have destroyed the removed RH
stalk and identify the removed RH stalk by serial number as part of the warranty claim submittal
process.
Once the upper and lower steering column covers are removed, you MUST take a CLEAR photo of
the part label showing the model and serial numbers of the old part. This is required to be attached
4/8
1/30/26, 11:41 AM
Federal Recall Bulletin
to the Claim Unit for reimbursement consideration. Claims filed without this photo may be denied.
PRWS CLAIM CODING
Campaign
Campaign
24KWE
Code:
Type:
afety
S
Recall
laim
C
Truck
Category:
Repair Type:
Proactive
Customer
Concern 092
Code:
Causal Code: 23
orrective
C
Action
03
Code:
esponsibility
R
CampSupp
Code:
Failure
015-001Causal Part:
Location: 030
21-6155Q
211
Supplier
Code:
B24-47A
0.3 hours
Inspect
right-hand
shift stalk
for affected
part number
per bulletin
procedures
– right-hand
shift stalk
replacement
not
required .
21442AB SRT Code:
B24-47B
0.4 hours
2.1m MD Inspect
right-hand
shift stalk
for affected
part
number,
replace right
hand shift
stalk and
include
photos per
bulletin
procedures.
Must follow
5/8
1/30/26, 11:41 AM
Federal Recall Bulletin
disposal
procedure.
B24-47C
0.5 hours
2.1m HD Inspect
right-hand
shift stalk
for affected
part
number,
replace
right-hand
shift stalk
and include
photos per
bulletin
procedures.
Must follow
disposal
procedure.
Procedure
Please follow your dealership's safety procedures and precautions to ensure the vehicle can be
safely repaired and maintained.
Please see the repair procedure appropriate for the chassis you are working on in the Links section
below.
Parts
Parts are available to order through PACCAR Parts and will initially be subject to the Chassis CNR
process.
For daily CNR quantities, place order through Parts Online (POL).
Dealers must provide the VIN8 for each truck down.
Use EM (E1 in Canada) for truck downs (Non Safety Recall population) for right-hand
stalk only.
Use ST (S1 in Canada) for non-truck down and Safety Recall orders.
If a duplicate chassis order is submitted, the order will be cancelled.
Once a CNR order has been placed through Parts Online (POL) and more are needed, dealers can
submit a TCS case under the category Place an Order with a justification for review.
All VINs above daily CNR limit must be included in the TCS case.
These orders will be reviewed to ensure they are in the shop.
Orders will be cancelled if 1) they are not truck down, 2) they are not in the shop, 3) a daily
https://paccarnet.sharepoint.com/sitepages/wtyfedrecallbltndetail.aspx?ctx=eyJ3ZWJVcmwiOiJodHRwczovL3BhY2Nhcm5ldC5zaGFyZXBvaW50LmN…
6/8
1/30/26, 11:41 AM
Federal Recall Bulletin
CNR order has not yet been place through Parts Online or 4) they are duplicate chassis.
NOTE
roactive repairs for vehicles
P
outside of the recall
population are prohibited per
CA080. In order for repairs on
non-recall chassis to be
considered for warranty, a
DAVIE logfile with RHS fault
codes proving a failure
occurred is required to be
submitted with the warranty
claim due to the limited
quantity of parts available.
NOTE
The Safety Recall may only be
marked complete if the Q216124-xxx part number is
installed.
Part
Part
Quantity
Number Description
IE-CABLE
T
T05317 50LB 15.5"
C
BLK
ee
S
Chassis
List
IGHTR
HAND
SHIFT
STALK
5
1
NOTE
Cable ties are packaged in
quantities of 100. The quantity
needed per repair is 5
individual cable ties.
Confirm parts are available prior to scheduling the customer for the repair.
To find the replacement right-hand shift stalk part number, refer to the chassis list. Locate your
chassis on the list, and then refer to the column titled “Replacement Stalk Part Number.”
7/8
1/30/26, 11:41 AM
Federal Recall Bulletin
CHASSIS LIST
24KWE KW Chassis List
REPAIR PROCEDURES
24KWE KW 2.1m HD RH Shift Stalk Replacement Procedure
24KWE KW 2.1m MD RH Shift Stalk Replacement Procedure
CUSTOMER LETTERS
24KWE Canadian Customer Letter - English
24KWE Canadian Customer Letter - French
24KWE US Customer Letter
24KWE Puerto Rican Customer Letter - Spanish
Revision History
01/30/2026: Recommended Repair verbiage updated to include photo requirements.
01/12/2026: The warranty section has an updated photo requirement.
12/22/2025: Parts section updated for multiple parts ordering.
12/11/2025: Warranty section has been updated to revise filing instructions with new Recommended
Repair Codes.
11/26/2025: This bulletin has been converted from an interim into a final safety recall, which includes
- CEL Doctor: The ANCEL AD310 is one of the best-selling OBD II scanners on the market and is recommended by Scotty Kilmer, a YouTuber and auto mechanic. It can easily determine the cause of the check engine light coming on. After repairing the vehicle's problems, it can quickly read and clear diagnostic trouble codes of emission system, read live data & hard memory data, view freeze frame, I/M monitor readiness and collect vehicle information.
- Sturdy and Compact: Equipped with a 2.5 foot cable made of very thick, flexible insulation. It is important to have a sturdy scanner as it can easily fall to the ground when working in a car. The AD310 OBD2 scanner is a well-constructed mechanic tool with a sleek design. It weighs 12 ounces and measures 8.9 x 6.9 x 1.4 inches. Thanks to its compact design and light weight, transporting the device is not a problem. The buttons are clearly labelled and the screen is large and displays results clearly.
- Accurate Fast and Easy to Use: The AD310 scanner can help you or your mechanic understand if your car is in good condition, provides exceptionally accurate and fast results, reads and clears engine trouble emission codes in seconds after you fixed the problem. This device will let you know immediately and fix the problem right away without any car knowledge. No need for batteries or a charger, get power directly from the OBDII Data Link Connector in your vehicle.
- OBDII Protocols and Car Compatibility: Many cheap scan tools do not really support all OBD2 protocols. AD310 scanner as it can support all OBDII protocols such as KWP2000, J1850 VPW, ISO9141, J1850 PWM and CAN. This device also has extensive vehicle compatibility with 1996 US-based, 2000 EU-based and Asian cars, light trucks, SUVs, as well as newer OBD2 and CAN vehicles both domestic and foreign. Pls confirm with our customer service whether it is compatible with your vehicle before purchasing.
- Home Necessity and Worthy to Own: This is an excellent code reader to travel or home with as it weighs less and it is compact in design. You can easily slide it in your backpack as you head to the garage, or put it on the dashboard, this will be a great fit for you. The AD310 is not only portable, but also accurate and fast in performance. Moreover, it covers various car brands and is suitable for people who just need a code reader to check their car.
- Multi-Functions - Practical Multi-Functions OBD2 code reader features built-in OBD2 DTC lookup library, which help you to determine the cause of the engine light, read code, erase code, view freeze frame, I/M ready, vehicle information, data flow, real-time curve, get vehicle speed information, calculate load value, engine coolant temperature, get engine speed.
- Wide Capability - Supports 9 protocols compatible with most 1996 US-Based, 2000 EU-Based and Asian cars, and newer OBD II & CAN domestic or import vehicles. Supports 6 languages - English,German, Dutch, Spanish, French, Italian.
- 2.8" LCD Display - Designed with a clear display 2.8" Large LCD screen - white backlight and contrast adjustment. No need any battery or charger, OBD reader gets the power directly from your vehicle through the OBDII Data Link Connector.
- Compact Design - Car diagnostic scanner is equipped with a 2.5 feet long cable and made of a very thick flexible insulator.There are 6 buttons on OBD2 Scanner:scroll up/down,enter/exit and buttons that quick query VIN vehicle number& the DTC fault code.
- ABS / Airbag codes NOT Supported - It is able to read and clear check engine information which is part of OBDII system, but it cannot work with non-OBDII systems, including ABS / Airbag / Oil Service Light, etc.
- 【Your Personal CEL Doctor – Read & Clear Engine Codes】The NT301 OBD2 scanner lets you read diagnostic trouble codes (DTCs), check em-issions readiness, turn off your Check Engine Light (CEL) or MIL, reset monitors, and view live data streams. It retrieves your vehicle's VIN instantly. Like all standard OBD2 scanners, it clears codes only after repairs are completed—if the issue persists, the code will return. Designed for DIYers who want to understand what’s really going on under the hood.
- 【Easy Code Reading – Just Plug & Play】Simply plug into the OBD2 port, turn the ignition to “ON” (engine off), and select the correct menu: Select OBDII-> Wait for seconds-> Select Read codes. For accurate results, ensure your vehicle is compatible and the OBD2 port is free from damage or wiring issues. No batteries needed— powered directly by your car.
- 【Live Data Graphing & Accuracy for Most OBD2 Vehicles】View and log live sensor data in graph form—monitor oxygen sensors, fuel trims, coolant temp, RPM, and more. Spot trends and suspicious values in real time. Compatible with most 1996+ gasoline cars, light trucks, and SUVs sold in the U.S., as well as many 2000+ European and Asian models. Also works on 12V diesel vehicles equipped with OBD2.
- 【S-mog Check Helper – Know Your Readiness Status at a Glance】With dedicated I/M readiness hotkeys and a simple Red-Yellow-Green LED indicator, you’ll instantly know if your vehicle is ready for em-issions testing. Built-in speaker provides audio feedback. No guesswork—just confidence before you head to the test center.
- 【A Must-Have Tool for Every Home Mechanic】Compact, rugged, and ready to use right out of the box. The 2.8” color screen is easy to read, even in daylight. No charging or setup required—just plug into the 16-pin DLC and start diagnosing. Recommended by professional mechanics on YouTube and trusted by DIYers worldwide.
Last update on 2026-03-24 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.