NHTSA ID Number: 11028321
Manufacturer Communication Number: 26-HA-001H TSB
TSB/Document Date: 2026-02-05
Summary
Some Elantra (CN7/CN7A), Elantra N (CN7 N) and Elantra Hybrid (CN7 HEV) vehicles may experience the following conditions: • Lack of airflow coming from the forward-facing center vents • Mode actuator not changing airflow direction after various inputs • Popping/snap noise when switching between different modes If any of the conditions above exist, follow the repair procedure in this bulletin to replace the ventilator lever and cam mode guide.
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
- 💝【Questions? We’re Here Anytime】MK808S is a...
- 🔥🔥🔥【2026 NEWLY RELEASED BI-DIRECTIONAL...
- 【28+ MOST POPULAR RESET SERVICE FOR 150 MAKES】Autel...
- 【ALL SYSTEM DIAGNOSTICS, FACTORY-LEVEL SCANNER】The...
- 【AUT0 SCAN & AUT0V1N, 10X FASTER】How much have you spent...
- 💯【Conta.ct us for Support Directly】If you met any...
- 🔥🔥🔥【2026 AUTEL FLAGSHIP MK900BT MK900-BT, NEW...
- 🚗【3000+ ACTIVE TESTS (50➡3000+), SAME AS MS...
- 🚗【40+ HOT SERVICES FOR 150 MAKES (28+➡40+)】Full...
- 🚗【OE ALL SYSTEM DIAGNOSE, AUTO SCAN 2.0: SCAN LICENSE...
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: 26-HA-001H TSB
Replacement Service Bulletin Number:
MFR Communication Date: 2026-01-29
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: UNKNOWN OR OTHER
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
GROUP
HVAC
Technical Service Bulletin
DATE
JANUARY 2026
NUMBER
26-HA-001H
MODEL(S)
SEE BELOW
A/C VENT MODE CHANGE ISSUES/NOISES –
VENTILATOR LEVER INSPECTION & REPLACEMENT
SUBJECT:
This TSB supersedes 25-HA-001H to update the ventilator lever part number, add the cam mode
guide in the Parts Information Table, and to modify the Service Procedure to replace the cam
mode guide during the replacement of the ventilator lever.
IMPORTANT
This field action requires justification in the form of a customer concern, and a confirmed case for
the related symptom outlined in the TSB, prior to any repair work. If justification requirements are
not met, any submitted claims are subject to debit. 5 / 60,000 New Vehicle Limited Warranty
applies. See Warranty Information section for more details.
Description: Some Elantra (CN7/CN7A), Elantra N (CN7 N) and Elantra Hybrid (CN7 HEV) vehicles
may experience the following conditions:
• Lack of airflow coming from the forward-facing center vents
• Mode actuator not changing airflow direction after various inputs
• Popping/snap noise when switching between different modes
If any of the conditions above exist, follow the repair procedure in this bulletin to replace the ventilator
lever and cam mode guide.
Applicable Vehicles:
Model Year
2023 – 2025
Model
Production Dates
Elantra (CN7)
04/25/2022 – 07/07/2025
Elantra N (CN7 N)
08/17/2022 – 07/07/2025
Elantra Hybrid (CN7 HEV)
04/25/2022 – 07/07/2025
Elantra (CN7A)
04/25/2022 – 06/02/2023
VIN Starts With
KMH
5NP
Circulate To: General Manager, Service Manager, Parts Manager, Warranty Manager, Service
Advisors, Technicians, Body Shop Manager, Fleet Repair
A/C VENT MODE CHANGE ISSUES/NOISES –
VENTILATOR LEVER INSPECTION & REPLACEMENT
SUBJECT:
Parts Information:
Model
Elantra
(CN7, CN7 N,
CN7 HEV,
CN7A)
Part Name
Part Number
Figure
Remarks
Ventilator Lever
97153-AA000QQH
Qty: 1
Cam Mode Guide
97212-AA000QQH
Qty: 1
Steering Wheel
Lock-Bolt
56115-B1000
Qty: 1
A-Pillar Clip
85815-C1100
Qty: 2
Trim Fastener
82315-2P000
Trim Clip – MTG
84747-3Y000
Replace
only if
broken or
damaged
NOTE: Dealers will be reimbursed via sublet as noted for any clips, regardless of replacement or not.
Required Equipment/Supplies:
Name
Figure
Plastic Panel/Trim
Removal Tools
Remarks
Standard shop equipment
NOTE: The above or a similar tool MUST be used for removing the front pillar trim.
TSB #: 26-HA-001H
Page 2 of 10
SUBJECT:
A/C VENT MODE CHANGE ISSUES/NOISES –
VENTILATOR LEVER INSPECTION & REPLACEMENT
SUBJECT:
Warranty Information:
Model
Op. Code
Operation
Op.
Time
Causal Part
Nature
Code
Cause
Code
Elantra
(CN7, CN7 N,
Ventilator Lever
50D226R0
2.8 M/H
97153-AA000
A32
ZZ4
CN7 HEV,
Replacement
CN7A)
NOTE 1: Submit claim on Claim Entry Screen as “Campaign” type.
NOTE 2: 5 / 60,000 New Vehicle Limited Warranty (NVLW) applies to the part(s) and repair
procedure(s) outlined in this TSB. Prior to beginning any repair work, ensure the part(s) associated
with the repair procedure are within NVLW, observing mileage and Warranty Start Date or date of first
use. If the subject part(s) are out of warranty coverage, the dealer has the option to submit a PA
Request for goodwill consideration on a case-by-case basis.
NOTE 3: If any part(s) not subject to this TSB are found in need of replacement while performing the
repair procedure, and the affected part(s) are still under warranty, the dealer may submit a separate
claim using the same repair order. If the part(s) not subject to this TSB are out of warranty coverage,
the dealer has the option to submit a PA Request for goodwill consideration on a case-by-case basis.
NOTE 4: This TSB includes repair justification photos. Op times include VIN, Mileage, and repair
justification photos as outlined in the Digital Documentation Policy.
NOTE 5: The incident parts are subject to callback through the normal Warranty Technical Center
(WTC) parts return process. Claim is subject to debit if the part is not returned.
NOTE 6: Op Code will reimburse $5.00 in sublet for any damaged fasteners during the service
procedure.
Service Procedure:
DIGITAL DOCUMENTATION
This TSB includes repair justification photos. Refer to the latest Warranty Digital Documentation
Policy for requirements.
! CAUTION
Wear gloves to prevent hand injuries when removing parts.
NOTICE
• Use a plastic trim removal tool to prevent damage to interior trim when removing components.
• Replace any damaged clips or pin-type retainers.
TSB #: 26-HA-001H
Page 3 of 10
SUBJECT:
SUBJECT:
A/C VENT MODE CHANGE ISSUES/NOISES –
VENTILATOR LEVER INSPECTION & REPLACEMENT
Service Procedure Flowchart
Vehicle In
Ventilator Lever Inspection
• Lack of airflow from forward-facing
center vents
• Mode actuator NOT changing airflow
direction after various inputs
• Pop/snap noise when switching
between different modes
No
Are any of
the above
conditions
present?
If vehicle has other
condition, this bulletin does
NOT apply.
Yes
Replace the Ventilator Lever
and Cam Mode Guide per
instructions in this TSB.
Repair vehicle per shop
manual instructions for the
specific condition.
Vehicle Out
TSB #: 26-HA-001H
Page 4 of 10
SUBJECT:
A/C VENT MODE CHANGE ISSUES/NOISES –
VENTILATOR LEVER INSPECTION & REPLACEMENT
SUBJECT:
Ventilator Lever Inspection
1.
Turn ON the A/C or heater.
2.
Set the airlow to floor mode (A) only.
A
A
3.
Change the mode actuator to the forwardfacing vent mode (B) and verify if airflow is
coming from the center vents.
Electronic (Automatic)
Knob Type (Manual)
B
A
B
B
• If there is airflow out of the center vents, but
other concerns are present, this TSB does
NOT apply. Follow normal diagnostic
procedures.
• If NO airflow is present from the forwardfacing center vents, or a popping/snap
noise is heard when switching modes,
replace the ventilator lever and cam mode
guide.
Proceed to Ventilator Lever and Cam
Mode Guide Replacement procedure.
TSB #: 26-HA-001H
Page 5 of 10
SUBJECT:
A/C VENT MODE CHANGE ISSUES/NOISES –
VENTILATOR LEVER INSPECTION & REPLACEMENT
SUBJECT:
Ventilator Lever and Cam Mode Guide Replacement
1.
Disconnect the negative (–) battery terminal
(A).
A
Tightening Torque:
2.
lb-ft
6.5
lb-in
78
N.m
8.8
Remove the main crash pad assembly (B) by
referring to the shop manual:
B
• Body (Interior and Exterior) >
Crash Pad > Main Crash Pad Assembly >
Repair procedures
Main Crash Pad Assembly
Tightening Torque:
lb-ft
16
N.m
21
NOTICE
C
Follow all instructions and torque
specifications closely.
NOTICE
Use a plastic trim removal tool (C) to
prevent damage to internal trim and
components.
NOTICE
Ensure to replace the existing clips (D)
with new ones when removing or
replacing the front pillar trim
(P/N: 85815-C1100).
TSB #: 26-HA-001H
D
Page 6 of 10
SUBJECT:
SUBJECT:
3.
4.
A/C VENT MODE CHANGE ISSUES/NOISES –
VENTILATOR LEVER INSPECTION & REPLACEMENT
Press the lock pin and disconnect the
passenger’s airbag (PAB) connectors (E).
E
Remove the main crash pad assembly and
locate the mode actuator (F) on the driver’s
side.
F
5.
Remove the fasteners and remove the mode
door actuator (F) and cam mode guide (G).
F
G
TSB #: 26-HA-001H
Page 7 of 10
SUBJECT:
SUBJECT:
6.
A/C VENT MODE CHANGE ISSUES/NOISES –
VENTILATOR LEVER INSPECTION & REPLACEMENT
Remove the ventilator lever screw (H) and
remove the ventilator lever arm (I).
I
H
7.
8.
Remove the screw and washer (J) from the old
ventilator lever and place it onto the new part
and reinstall the new ventilator lever onto the
HVAC box.
J
DIGITAL
DOCUMENTATION
Using the STUI camera function, take a
photo of the original ventilator lever arm
and cam mode guide.
Upload the photo to STUI.
NOTE: If the STUI camera function is
NOT used, write the last 6 digits of the
VIN and date of repair on a piece of
paper to include in the photo.
TSB #: 26-HA-001H
Page 8 of 10
SUBJECT:
A/C VENT MODE CHANGE ISSUES/NOISES –
VENTILATOR LEVER INSPECTION & REPLACEMENT
SUBJECT:
9.
Before reinstalling the mode actuator and
replacing the cam mode guide, inspect the
position of the floor door lever (K).
•
FAIL
K
If the floor door lever is horizontal as
shown (FAIL), then correct the position
by pushing the lever downward as
shown in the second photo (PASS).
PASS
K
10.
Replace the cam mode guide with the newly
supplied part and re-install the actuator in the
reverse order of removal.
11.
Reinstall the main crash pad in the reverse
order of removal process.
NOTICE
• Make sure the crash pad fits onto the
guide pins correctly.
• Before tightening the bolts, make sure
the crash pad wire harnesses are NOT
pinched.
• Make sure the connectors are plugged
in properly, and the antenna lead is
connected properly.
• Make sure that each of the assembly
components operates properly.
• Replace any damaged clips or pin type retainers (crash pad side cover
clip P/N: 84747-3Y000)
TSB #: 26-HA-001H
Page 9 of 10
SUBJECT:
A/C VENT MODE CHANGE ISSUES/NOISES –
VENTILATOR LEVER INSPECTION & REPLACEMENT
SUBJECT:
12.
Reinstall all remaining components in the
reverse order of removal.
NOTICE
When reinstalling the steering wheel, be
sure to replace the steering wheel lock
bolt (L) with a new one
(P/N: 56115-B1000).
L
Refer to the shop manual:
•
Steering System > Steering Wheel >
Repair procedures
Tightening Torque:
lb-ft
36
N.m
49
13.
Verify proper operation of the heating and air
conditioning vents.
14.
The service procedure is now complete.
TSB #: 26-HA-001H
Page 10 of 10
SUBJECT:
- CEL Doctor: The ANCEL AD310 is one of the best-selling OBD II scanners on the market and is recommended by Scotty Kilmer, a YouTuber and auto mechanic. It can easily determine the cause of the check engine light coming on. After repairing the vehicle's problems, it can quickly read and clear diagnostic trouble codes of emission system, read live data & hard memory data, view freeze frame, I/M monitor readiness and collect vehicle information.
- Sturdy and Compact: Equipped with a 2.5 foot cable made of very thick, flexible insulation. It is important to have a sturdy scanner as it can easily fall to the ground when working in a car. The AD310 OBD2 scanner is a well-constructed mechanic tool with a sleek design. It weighs 12 ounces and measures 8.9 x 6.9 x 1.4 inches. Thanks to its compact design and light weight, transporting the device is not a problem. The buttons are clearly labelled and the screen is large and displays results clearly.
- Accurate Fast and Easy to Use: The AD310 scanner can help you or your mechanic understand if your car is in good condition, provides exceptionally accurate and fast results, reads and clears engine trouble emission codes in seconds after you fixed the problem. This device will let you know immediately and fix the problem right away without any car knowledge. No need for batteries or a charger, get power directly from the OBDII Data Link Connector in your vehicle.
- OBDII Protocols and Car Compatibility: Many cheap scan tools do not really support all OBD2 protocols. AD310 scanner as it can support all OBDII protocols such as KWP2000, J1850 VPW, ISO9141, J1850 PWM and CAN. This device also has extensive vehicle compatibility with 1996 US-based, 2000 EU-based and Asian cars, light trucks, SUVs, as well as newer OBD2 and CAN vehicles both domestic and foreign. Pls confirm with our customer service whether it is compatible with your vehicle before purchasing.
- Home Necessity and Worthy to Own: This is an excellent code reader to travel or home with as it weighs less and it is compact in design. You can easily slide it in your backpack as you head to the garage, or put it on the dashboard, this will be a great fit for you. The AD310 is not only portable, but also accurate and fast in performance. Moreover, it covers various car brands and is suitable for people who just need a code reader to check their car.
- Multi-Functions - Practical Multi-Functions OBD2 code reader features built-in OBD2 DTC lookup library, which help you to determine the cause of the engine light, read code, erase code, view freeze frame, I/M ready, vehicle information, data flow, real-time curve, get vehicle speed information, calculate load value, engine coolant temperature, get engine speed.
- Wide Capability - Supports 9 protocols compatible with most 1996 US-Based, 2000 EU-Based and Asian cars, and newer OBD II & CAN domestic or import vehicles. Supports 6 languages - English,German, Dutch, Spanish, French, Italian.
- 2.8" LCD Display - Designed with a clear display 2.8" Large LCD screen - white backlight and contrast adjustment. No need any battery or charger, OBD reader gets the power directly from your vehicle through the OBDII Data Link Connector.
- Compact Design - Car diagnostic scanner is equipped with a 2.5 feet long cable and made of a very thick flexible insulator.There are 6 buttons on OBD2 Scanner:scroll up/down,enter/exit and buttons that quick query VIN vehicle number& the DTC fault code.
- ABS / Airbag codes NOT Supported - It is able to read and clear check engine information which is part of OBDII system, but it cannot work with non-OBDII systems, including ABS / Airbag / Oil Service Light, etc.
- 【Your Personal CEL Doctor – Read & Clear Engine Codes】The NT301 OBD2 scanner lets you read diagnostic trouble codes (DTCs), check em-issions readiness, turn off your Check Engine Light (CEL) or MIL, reset monitors, and view live data streams. It retrieves your vehicle's VIN instantly. Like all standard OBD2 scanners, it clears codes only after repairs are completed—if the issue persists, the code will return. Designed for DIYers who want to understand what’s really going on under the hood.
- 【Easy Code Reading – Just Plug & Play】Simply plug into the OBD2 port, turn the ignition to “ON” (engine off), and select the correct menu: Select OBDII-> Wait for seconds-> Select Read codes. For accurate results, ensure your vehicle is compatible and the OBD2 port is free from damage or wiring issues. No batteries needed— powered directly by your car.
- 【Live Data Graphing & Accuracy for Most OBD2 Vehicles】View and log live sensor data in graph form—monitor oxygen sensors, fuel trims, coolant temp, RPM, and more. Spot trends and suspicious values in real time. Compatible with most 1996+ gasoline cars, light trucks, and SUVs sold in the U.S., as well as many 2000+ European and Asian models. Also works on 12V diesel vehicles equipped with OBD2.
- 【S-mog Check Helper – Know Your Readiness Status at a Glance】With dedicated I/M readiness hotkeys and a simple Red-Yellow-Green LED indicator, you’ll instantly know if your vehicle is ready for em-issions testing. Built-in speaker provides audio feedback. No guesswork—just confidence before you head to the test center.
- 【A Must-Have Tool for Every Home Mechanic】Compact, rugged, and ready to use right out of the box. The 2.8” color screen is easy to read, even in daylight. No charging or setup required—just plug into the 16-pin DLC and start diagnosing. Recommended by professional mechanics on YouTube and trusted by DIYers worldwide.
Last update on 2026-03-24 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.