Connection offline
Transaction No.:

Technical Service Bulletin

2080496/1

91-26-01 - ID. Software (ID.S) Compatibility of Infotainment Display Replacement
(ID.S 5.4.3KD)

Condition
Applicable Vehicles
Model(s)

Year

Eng. Code

Trans. Code

VIN Range
From

VIN Range
To

PR Number
(s)

ID.4

2024

All

All

All

All

V7B

Revision Table
Instance Number Published Date Version Number Reason For Update
2080496/1

1/21/26

91-26-01

Original publication

•

The parts catalog (ETKA) refers to this technical bulletin.

•

An original replacement Front Information Display Control Head -J685- part number 1T3.919.605.D
(SW 4043) for production ID.S 4.1 is no longer available.

CAUTION
This technical bulletin is applicable only to support replacement using the available service part when
replacement is justified according to a proper technical diagnosis, which is outside the scope of this
technical bulletin.

Technical Background
Replacement part 1T3.919.605.P/Q (SW 4047) is used after the 5.4.3KD update.

NOTICE
The parts catalog (ETKA) uses the most recent documented build status of the vehicle to identify a
suitable replacement part. Part numbers given in the parts catalog may change after a compound software
update is completed and documented online, and a previously compatible replacement part that contains
earlier software may no longer be compatible with the vehicle.
– Look up the part number according to the VIN in the parts catalog only after the 5.4.3KD update is

completed.

Production Solution
Not applicable.

Service
1.

2.

Check for possible 5.4.3KD update campaigns:
‒

If campaign 91VH or 917K applies to the vehicle and is closed, proceed to step 4.

‒

If campaign 91VH or 917K applies to the vehicle and is open, proceed to step 2.

‒

If neither campaign is applicable to this vehicle, proceed to step 3.

Perform the open campaign.
‒

3.

Perform the update according to technical bulletin 2080124/*.
‒

4.

After the 5.4.3KD update is completed, proceed to step 4.

After the 5.4.3KD update is completed, proceed to step 4.

Carry out the following steps in order:

CAUTION
The compound software update ID.S 5.4.3KD must be completed before proceeding!

•

Replace the Front Information Display Control Head -J685- according to the repair manual.
‒

For the replaced service part, select and perform the “replace control module” (initiation /
commissioning) test plan in Guided Fault Finding (GFF).

‒

For the replaced service part, perform any additional GFF tests that remain in the test plan list.

‒

End of procedure.

Warranty

NOTICE
If covered under warranty, the procedure given in this technical bulletin shall be processed as an
additional claim line, separately from the service part which required usage of this technical bulletin.

To determine if this procedure is covered under Warranty, always refer to the Warranty Policies and
Procedures Manual 1)
Model(s)

Year(s)

Eng. Code(s)

Trans. Code(s)

VIN
Range
From

VIN Range To

ID.4

2024

All

All

All

All

SAGA Coding
Claim Type:

Use applicable Claim Type 1)
Damage

Service Number:

Code

9193

0039

HST

Damage Location (Depends on
Service No.)

--

--

MY24 ID.4

Parts Manufacturer
Labor Operation 3) : GFF/Guided functions
(connect battery charger + setup)

WWO 2)

01500010 = See Elsa for latest time units

ONLY if Step 3 was performed:
Labor Operation 3) : Update ICAS3 with USB

97102599 = 70 TU

Labor Operation 3) : Perform up to four bus sleep
procedures

27060299 = 25 TU per bus sleep

NOTE: One bus sleep procedure is required during the flash process. The reasoning for any additional bus
sleep procedures must be documented in the claim comments.
ONLY if necessary during the update procedure if Step 3 was performed:
Labor Operation 3) : Remove and install fuse

97921999 = 10 TU

(includes resetting individual control units if
necessary + waiting time)
Labor Operation 3) : Battery ground strap loosen +
fasten

97850950 = See Elsa for latest time units

Labor Operation 3) : Check diagnostic connection
connector housing (includes releasing connector
housing)

97090199 = 10 TU

Labor Operation 3) : Central wiring harness repair
(use appropriate operation according to number of
cables repaired)

970941xx = See Elsa for latest time units

Causal Part:

Select labor operation 01500060
Diagnostic Time 4)

GFF Time expenditure

01500060 = Actual GFF print out

YES

NOTE: If the software update and related GFF work is performed on more than one diagnostic session, the
multiple GFF logs can be added together.
Ensure the GFF logs are added together correctly. For example, two logs from the same diagnostic
session are not allowed.
The GFF paperless log IDs should be documented in the claim comments.
Claims and GFF logs may be audited to ensure that the actual GFF log time is being claimed.
Road Test

01210004 = see Elsa for latest time units

YES

Technical Diagnosis

01320000 = 00 TU max.

NO

Claim Comment: Input “As per Technical Bulletin 2080496” in comment section of Warranty Claim.
1)

Vehicle may be outside any Warranty in which case this Technical Bulletin is informational only.

2)

Code per warranty vendor code policy.

3)

Labor Time Units (TUs) are subject to change with ELSA updates.

4)

Documentation required per Warranty Policies and Procedures Manual.

Required Parts and Tools
No special parts required.
No special tools required.

Additional Information
All part and service references provided in this Technical Bulletin are subject to change and/or removal.
Always check with your Parts Dept. and Repair Manuals for the latest information.
© 2026 Volkswagen Group of America, Inc. All rights reserved. Information contained in this document is
based on the latest information available at the time of printing and is subject to the copyright and other
intellectual property rights of Volkswagen Group of America, Inc., its affiliated companies and its licensors.
All rights are reserved to make changes at any time without notice. No part of this document may be
reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical,
photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites,
without the prior expressed written permission of the publisher.