NHTSA ID Number: 11028670
Manufacturer Communication Number: 26-01-013H DN
TSB/Document Date: 2026-02-10
Summary
Certain Santa Fe (TMA), Santa Fe Sport (AN), Sonata (LFA), and Tucson (TL) vehicles equipped with Theta II engines may exhibit elevated engine-out emissions.
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
- Advanced protection against the four main causes of engine...
- Delivers 40% stronger wear protection than industry...
- Provides 15% better deposit defense vs. industry standards...
- Up to 2.5X better heat protection vs. industry standards to...
- Engineered for excellent low-temperature flow, reducing...
- Formulated for engines with 75,000 miles or more, Valvoline...
- Delivers 20% better wear protection and 15% better sludge...
- Extra detergents safeguard against friction, corrosion and...
- Advanced friction-fighting additives help maximize...
- Provides performance benefits for high mileage, new and...
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: 26-01-013H DN
Replacement Service Bulletin Number:
MFR Communication Date: 2026-02-06
MFR Internal Campaign ID/Software Version: 9C2
Communication Type: Service Campaign
NHTSA Components: ENGINE
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
Service Campaign /w Customer Notification 9C2: ECM Update – Theta II Emissions Logic
Improvement
February 05, 2026
Document Topic
• Revised Technical Service Bulletin (TSB) 26-01-013H posted on HMA Tech Info:
o To include 2016-2017MY Sonata (LFA) and 2017-2018MY Santa Fe Sport (AN)
vehicles, along with 3 new software events (1367, 1372, & 1373) and associated
GDS, Warranty, ROM ID, and Manual Mode Password information. (see TSB
for details)
Date
02/05/2026
Campaign Description
Certain Santa Fe (TMA), Santa Fe Sport (AN), Sonata (LFA), and Tucson (TL) vehicles equipped with Theta II
engines may exhibit elevated engine-out emissions.
The California Air Resources Board has determined that these vehicles may be releasing air pollutants which
exceed Federal and California standards.
Affected Vehicles (Certain)
•
•
•
•
2019-2020MY Santa Fe (TMA) produced from 05/23/2018 – 08/23/2021
2016-2019MY Sonata (LFA) produced from 06/23/2015 – 09/30/2019
2018-2021MY Tucson (TL) produced from 01/30/2018 – 02/04/2021
2017-2018MY Santa Fe Sport (AN) produced from 06/20/2016 – 04/19/2018
Repair Process/Information
Follow the service procedure in TSB 26-01-013H (or latest version) to update the Engine Control Module (ECM).
• Technician Certification Requirements: Hyundai Certified (or higher)
Recommended Alternative Transportation
A Service Rental Vehicle (SRC) should be provided to customers if their vehicle is required to be kept overnight.
In addition, an SRC may be necessary based on the repair procedure duration and any other additional work on
the vehicle that may need to be addressed during the customer’s visit. If an SRC is not available, other options
such as a 3rd Party Rental or Rideshare may be provided.
Other Notes/Recommendations
•
•
•
•
•
•
•
All vehicles will require a software update of the Engine Control Module (ECM).
All vehicles require the application of an emissions sticker under the hood during service.
Provide the customer the proof of correction card if the state requires it (see TSB for certain states).
If a customer arrives at the dealer with no appointment scheduled, it is recommended the dealer offer
alternative transportation to the customer.
If a customer schedules an appointment in advance, ensure the appropriate tools, equipment,
sticks/card (as necessary) are on hand to perform any related repairs.
Always inquire if the customer will have time for an additional service to be performed if they were
originally scheduled for a different service.
Be honest with customers regarding wait times. Update the customer if the original estimated wait time
is exceeded.
1
Parts Information
•
•
•
Refer to TSB 26-01-013H (or latest version) for the latest parts information.
Campaign Sticker (P/N NP001 -SC9 C 2) – De aler may order from its facing PDC.
Vehicle Emission – Proof of Correction Card (NP050 -09006): Dealers from certain states referred to in
the ‘Remarks’ section are required to provide a card to customers as proof the vehicle has completed
Warranty Information
Per TSB 26-01-013H (or latest version), this service campaign pays the following:
• Labor:
o 0.4 M/H for THETA II ECU Software Update (only with campaign 9C2 OPEN)
o 0.2 M/H for Admin + Emissions Label Application (only use with both campaign 9C2 &
campaign 953 open)
• Digital Documentation:
o Claims are subject to review after submission. Please note a picture of the original shock
absorbers displaying their production stamp is required. If it found that the pictures are not
compliannt with requested ones per TSB, claim is subject to debit.
Customer Talk Tracks
1.
For Customers with an appointment, but the campaign is not part of the originally scheduled services:
“I see that your vehicle has an open service campaign that we would like to take care of for you while you
are here today. This service campaign requires a software update to the emissions logic within the Engine
Control Module (ECM). This service, of course, will be provided at no cost to you and, if necessary, we
would like to offer you alternative transportation while we repair your vehicle. We apologize for the
inconvenience.”
2. For Customers at a dealership in the service lane: “During your visit today, I checked your vehicle for any
open campaigns or recalls and found that your vehicle has an open campaign. This service campaign
requires a software update to the emissions logic within the Engine Control Module (ECM). This service, of
course, will be provided at no cost to you and, if necessary, we would like to offer you alternative
transportation while we repair your vehicle. We apologize for the inconvenience.”
3. For Customers over the phone: “While I have you on the line and verifying your current appointment, I ran
your VIN and found that your vehicle has an open campaign. This service campaign requires a software
update to the emissions logic within the Engine Control Module (ECM). If time permits, we can address this
2
campaign during your current appointment, and it will be at no cost
to you. Should you need it, we can arrange for alternate transportation since this may prolong the stay of
your vehicle in for service. We apologize for the inconvenience.”
4. For Hyundai customers with a concern: “If your vehicle experiences a check engine light, please reach
out to your nearest Hyundai dealership for assistance to schedule an appointment.”
Best Practice Checklist
Reservation: Did you check WebDCS for additional campaigns or recalls? Did you check for any declined
services from previous visits?
Yes
No – Please ensure all open campaign(s)/recall(s) are identified and completed by the dealership.
Also, ask the customer if they would like to have any of the previously declined services
performed.
Readiness: Are the necessary tools, parts, and equipment (if applicable) available?
Yes
No – It is highly recommended to order the necessary tools/parts ahead of time to save time
perform repair efficiently for the optimal customer experience. Please place orders from your
facing PDC the stickers & cards (if applicable).
Reception: Did the customer provide authorization to perform repairs?
Yes
No – Customer must be consulted and provide approval before proceeding with any services on
their vehicle.
Reception: Did you explain to the customer the expected repair time based on the repair and set the
expectation for a status update?
Yes
No – Customer should be given an estimated time of when their vehicle is completed so the
customer can plan the rest of their day away from the dealership.
Reception: Did you offer the customer Alternative Transportation if requested?
Yes
No - Customer should be offered alternative transportation if their vehicle needs to be kept
overnight. In addition, an SRC may be required based on the duration of the repair procedure and
any other additional work on the vehicle that may need to be addressed during the customer’s
visit.
Repair: Does the Technician meet the recommended training requirements noted above to complete this
campaign?
Yes
No – Please ensure a technician with the recommended training level requirement(s) completes
this repair.
Repair: Were the appropriate pictures taken as outlined in TSB 26-01-013H (or latest version)?
Yes
No – Please ensure appropriate picture(s) are taken for the dealership to be paid. See TSB for
sample photo(s). Refer to the latest Warranty Digital Documentation Policy for requirements.
3
Return: Did you have the customer’s signature on all warranty lines in addition to the final RO?
Yes
No – Customer must sign the final invoice upon delivering the vehicle back to the customer.
FAQs
Q1: What is the issue?
A1: Certain Santa Fe (TMA), Santa Fe Sport (AN), Sonata (LFA), and Tucson (TL) vehicles equipped with Theta II
engines may exhibit elevated engine-out emissions.
Q2: What are the affected vehicles?
A2: The following vehicles include the following:
• Certain 2019-2020MY Santa Fe (TMA) produced from 05/23/2018 – 08/23/2021
• Certain 2016-2019MY Sonata (LFA) produced from 06/23/2015 – 09/30/2019
• Certain 2018-2021MY Tucson (TL) produced from 01/30/2018 – 02/04/2021
• Certain 2017-2018MY Santa Fe Sport (AN) produced from 06/20/2016 – 04/19/2018
Q3: Why is this campaign being provided to me?
A3: These vehicles may exhibit elevated engine-out emissions, which exceed Federal and California standards.
These standards were established to protect your health and welfare from the dangers of air pollution.
Q4: Are you a California registered owner or one from Colorado, Connecticut, Delaware, Maine, Maryland,
Massachusetts, New Jersey, New York, Oregon, Pennsylvania, Rhode Island, Vermont or Washington?
A4: Because your state has adopted the California emissions regulation, your Hyundai dealer will also provide a
“Proof of Correction” certificate as verification that this repair has been completed. It’s critical that it is retained
for your records and to be presented when registering your vehicle, if requested.
Q5: What will be done during service at the dealer?
A5: The dealership will update the Engine Control Module (ECM) software at no cost to the customer.
Q6: When will the affected customer(s) be notified of this campaign?
A6: Customers are expected to notified via First Class Mail starting February 2026.
Contact Reference
Please see the list below for commonly referred to contacts. Thank you for your prompt attention to this
important emissions matter and continued commitment to Hyundai customers.
4
Key Contact Information
Dealer Support
Parts
Contact Information
Description
HyundaiPartsHotline@MobisUSA.com
Parts ordering hotline
1-800-545-4515
Techline
1‐800‐325‐6604
Warranty HELP Line
1‐877‐446‐2922
Vehicle Technical Support for Hyundai Dealer
Technicians
Warranty Claim questions for Hyundai Dealers
Warranty Prior Approval (PA) Center
PA@hmausa.com
Warranty Prior Approval (PA) Center for Hyundai Dealers
Xtime Technical Support
Support@xtime.com
1‐866‐984‐6355
Assistance with Car Care Scheduling:
• Appointment / Shop Capacity Management / Campaign
Integration / Operation Codes
Support@autoloop.com
Assistance with Car Care Scheduling:
AutoLoop Technical Support
•
1-877-850-2010
CDK Technical Support
Appointment / Shop Capacity Management / Campaign
Integration / Operation Codes
https://serviceconnect.support.cdk.com/ Assistance with Car Care Scheduling:
•
Customer Support
Appointment / Shop Capacity Management / Campaign
Integration / Operation Codes
Contact Information
Description
Hyundai Customer Care Center
(Recall /Campaign Questions)
1‐855‐671‐3059
Customer questions or concerns related to recall or service
campaigns
Hyundai Recall /Campaign Website
Updated information related to the specific recall or service
campaign
Hyundai Customer Care
Center(GeneralQuestions)
1‐800‐633‐5151
Hyundai Roadside Assistance
1-800-243-7766
Customers general questions, non‐campaign related
Hyundai Roadside Assistance
Key Reference Information
Name
Campaign Central
Source
Consolidated repository of recall and service campaign dealer best practices. Located on the service tab
homepage in www.HyundaiDealer.com
Car Care Scheduling (Xtime) - Tutorials www.HyundaiDealer.com > Service > Dealer Resources > DocumentsLibrary > Car Care Scheduling
Car Care Scheduling (Xtime) - Recall
Appointment Notification
Parts – Campaign Parts Management
(CPM) Procedure
Service Rental Car (SRC) Program
1.
2.
3.
4.
5.
Log into Xtime
Under the menu at the top left, select ‘CONFIGURE’
Under the dealership tab, click “EMAIL COMMUNICATION”
Slide the toggle to “ADVANCED”
Populate as many e-mails as desired in the “PARTS DESK EMAIL FIELD”
As applicable; www.HyundaiDealer.com > Parts > Documents Library > Campaign Parts Management
SRC Documentation: www.HyundaiDealer.com > Service tab > Documents Library > Service Rental Car
TSD: www.HyundaiDealer.com > Service tab > SRC Fleet Mgmt Software
Insurance: www.HyundaiDealer.com > Service tab > SRC Insurance
Technical Service Bulletin (TSB)
www.HyundaiDealer.com > Service tab > Hyundai Tech Info
Uncompleted Campaign VIN Listing
A listing of vehicles is located on WEBDCS > SERVICE tab > select UNCOMPLETED CAMPAIGN VIN LISTING
– Dealer Stock (New, SRC, CPO, etc.) and Retailed.
Recall Campaign Website
NHTSA Website
5
Appendix
Document Topic
• Revised Technical Service Bulletin (TSB) 26-01-013H posted on HMA Tech Info:
o Includes 2016-2017MY Sonata (LFA) and 2017-2018MY Santa Fe Sport (AN)
vehicles, along with 3 new software events (1367, 1372, & 1373) and associated
GDS, Warranty, ROM ID, and Manual Mode Password information.
• Added 16-17MY Sonata (LFA) & 17-18MY Santa Fe Sport (AN) in indicated areas
• Revised Technical Service Bulletin (TSB) 25-01-087H-1 posted on HMA Tech Info:
o Include 2018MY Sonata (LFA) and Tucson (TL) vehicles & associated software
events, GDS, Warranty, ROM IDs, & Password Info (see TSB for details)
• Added 18MY in indicated areas below (pages 1 & 4)
• Technical Service Bulletin (TSB) 25-01-087H published on HMA Tech Info
6
Date
02/05/2026
12/15/2025
11/25/2025
- CEL Doctor: The ANCEL AD310 is one of the best-selling OBD II scanners on the market and is recommended by Scotty Kilmer, a YouTuber and auto mechanic. It can easily determine the cause of the check engine light coming on. After repairing the vehicle's problems, it can quickly read and clear diagnostic trouble codes of emission system, read live data & hard memory data, view freeze frame, I/M monitor readiness and collect vehicle information.
- Sturdy and Compact: Equipped with a 2.5 foot cable made of very thick, flexible insulation. It is important to have a sturdy scanner as it can easily fall to the ground when working in a car. The AD310 OBD2 scanner is a well-constructed mechanic tool with a sleek design. It weighs 12 ounces and measures 8.9 x 6.9 x 1.4 inches. Thanks to its compact design and light weight, transporting the device is not a problem. The buttons are clearly labelled and the screen is large and displays results clearly.
- Accurate Fast and Easy to Use: The AD310 scanner can help you or your mechanic understand if your car is in good condition, provides exceptionally accurate and fast results, reads and clears engine trouble emission codes in seconds after you fixed the problem. This device will let you know immediately and fix the problem right away without any car knowledge. No need for batteries or a charger, get power directly from the OBDII Data Link Connector in your vehicle.
- OBDII Protocols and Car Compatibility: Many cheap scan tools do not really support all OBD2 protocols. AD310 scanner as it can support all OBDII protocols such as KWP2000, J1850 VPW, ISO9141, J1850 PWM and CAN. This device also has extensive vehicle compatibility with 1996 US-based, 2000 EU-based and Asian cars, light trucks, SUVs, as well as newer OBD2 and CAN vehicles both domestic and foreign. Pls confirm with our customer service whether it is compatible with your vehicle before purchasing.
- Home Necessity and Worthy to Own: This is an excellent code reader to travel or home with as it weighs less and it is compact in design. You can easily slide it in your backpack as you head to the garage, or put it on the dashboard, this will be a great fit for you. The AD310 is not only portable, but also accurate and fast in performance. Moreover, it covers various car brands and is suitable for people who just need a code reader to check their car.
- Multi-Functions - Practical Multi-Functions OBD2 code reader features built-in OBD2 DTC lookup library, which help you to determine the cause of the engine light, read code, erase code, view freeze frame, I/M ready, vehicle information, data flow, real-time curve, get vehicle speed information, calculate load value, engine coolant temperature, get engine speed.
- Wide Capability - Supports 9 protocols compatible with most 1996 US-Based, 2000 EU-Based and Asian cars, and newer OBD II & CAN domestic or import vehicles. Supports 6 languages - English,German, Dutch, Spanish, French, Italian.
- 2.8" LCD Display - Designed with a clear display 2.8" Large LCD screen - white backlight and contrast adjustment. No need any battery or charger, OBD reader gets the power directly from your vehicle through the OBDII Data Link Connector.
- Compact Design - Car diagnostic scanner is equipped with a 2.5 feet long cable and made of a very thick flexible insulator.There are 6 buttons on OBD2 Scanner:scroll up/down,enter/exit and buttons that quick query VIN vehicle number& the DTC fault code.
- ABS / Airbag codes NOT Supported - It is able to read and clear check engine information which is part of OBDII system, but it cannot work with non-OBDII systems, including ABS / Airbag / Oil Service Light, etc.
- 【Your Personal CEL Doctor – Read & Clear Engine Codes】The NT301 OBD2 scanner lets you read diagnostic trouble codes (DTCs), check em-issions readiness, turn off your Check Engine Light (CEL) or MIL, reset monitors, and view live data streams. It retrieves your vehicle's VIN instantly. Like all standard OBD2 scanners, it clears codes only after repairs are completed—if the issue persists, the code will return. Designed for DIYers who want to understand what’s really going on under the hood.
- 【Easy Code Reading – Just Plug & Play】Simply plug into the OBD2 port, turn the ignition to “ON” (engine off), and select the correct menu: Select OBDII-> Wait for seconds-> Select Read codes. For accurate results, ensure your vehicle is compatible and the OBD2 port is free from damage or wiring issues. No batteries needed— powered directly by your car.
- 【Live Data Graphing & Accuracy for Most OBD2 Vehicles】View and log live sensor data in graph form—monitor oxygen sensors, fuel trims, coolant temp, RPM, and more. Spot trends and suspicious values in real time. Compatible with most 1996+ gasoline cars, light trucks, and SUVs sold in the U.S., as well as many 2000+ European and Asian models. Also works on 12V diesel vehicles equipped with OBD2.
- 【S-mog Check Helper – Know Your Readiness Status at a Glance】With dedicated I/M readiness hotkeys and a simple Red-Yellow-Green LED indicator, you’ll instantly know if your vehicle is ready for em-issions testing. Built-in speaker provides audio feedback. No guesswork—just confidence before you head to the test center.
- 【A Must-Have Tool for Every Home Mechanic】Compact, rugged, and ready to use right out of the box. The 2.8” color screen is easy to read, even in daylight. No charging or setup required—just plug into the 16-pin DLC and start diagnosing. Recommended by professional mechanics on YouTube and trusted by DIYers worldwide.
Last update on 2026-03-23 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.