NHTSA ID Number: 11028909

Manufacturer Communication Number: N252516900-01

TSB/Document Date: 2026-02-19


Summary

Emission Recall. General Motors has decided to conduct a Voluntary Emission Recall. Certain vehicles listed above may have a condition which can cause the fuel pump power control module to fail. If this were to occur, fuel flow to the engine could be interrupted. Dealers will replace the fuel pump power control module.


If the PDF is very large, it may not load in the preview below.

Download PDF [328.06 KB]


Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.

If the TSB PDF does not show, download or view it on the NHTSA Website.

Click on the (+) Plus Sign

Then Click on Associated Document(s)


Bestseller No. 1
Valvoline Advanced Full Synthetic SAE 0W-20 Motor Oil 5 QT
  • Advanced protection against the four main causes of engine...
  • Delivers 40% stronger wear protection than industry...
  • Provides 15% better deposit defense vs. industry standards...
  • Up to 2.5X better heat protection vs. industry standards to...
  • Engineered for excellent low-temperature flow, reducing...
Bestseller No. 2
Valvoline MaxLife High Mileage 5W-30 Synthetic Blend Motor Oil 5 Quart
  • Formulated for engines with 75,000 miles or more, Valvoline...
  • Delivers 20% better wear protection and 15% better sludge...
  • Extra detergents safeguard against friction, corrosion and...
  • Advanced friction-fighting additives help maximize...
  • Provides performance benefits for high mileage, new and...

Search NHTSA Database for Recalls

View Latest Recalls


Search NHTSA Database for Vehicle Investigations

View Latest Vehicle Investigations


Search NHTSA Database for Vehicle Complaints

View Latest Vehicle Complaints


TSB/Document ID: N252516900-01

Replacement Service Bulletin Number:

MFR Communication Date: 2026-02-19

MFR Internal Campaign ID/Software Version: N252516900-01

Communication Type: Emissions

NHTSA Components: FUEL/PROPULSION SYSTEM

MFR Component System:

MFR Component Subsystem:


Previous TSB

Next TSB



GENERAL MOTORS
DCS7438
URGENT - DISTRIBUTE IMMEDIATELY
Date:

February 19, 2026

Subject: REVISION: N252516900-01 - Emission Recall
Fuel Pump Power Control Module
Phased Launch Complete
Models: 2021-2022 Buick Envision
2021 Cadillac Escalade and ESV
2021-2023 Cadillac XT4
2021-2022 Cadillac XT5
2021-2022 Cadillac XT6
2021 Chevrolet Blazer
2021 Chevrolet Camaro
2022 Chevrolet Equinox
2021 Chevrolet Malibu
2021 Chevrolet Suburban
2021 Chevrolet Tahoe
2021-2022 GMC Acadia
2021 GMC Savana
2022 GMC Terrain
2021 GMC Yukon and XL

This bulletin has been revised to announce that all VINs have been placed in an
Open status in IVH, and the phased launch is complete. Please discard all
previous copies of bulletin N252516900.
END OF MESSAGE

Emission Recall
N252516900 Fuel Pump Power Control Module
Release Date:
Revision Description:

Attention:

February 2026

Revision:

01

This bulletin has been revised to announce that all VINs have been placed in an Open
status in IVH, and the phased launch is complete. Please discard all previous copies of
bulletin N252516900.

Investigate Vehicle History (IVH) in the GM Global Warranty Management system MUST always
be checked to confirm vehicle involvement and MUST be in OPEN status prior to beginning any
required inspections and/or repairs. DO NOT use Service Information with VIN search, as it will
not verify the VIN eligibility for field actions.
Model Year

Make
Buick
Cadillac
Cadillac
Cadillac
Cadillac
Cadillac
Chevrolet
Chevrolet
Chevrolet
Chevrolet
Chevrolet
Chevrolet
Chevrolet
GMC
GMC
GMC
GMC
GMC

Model

From
2021
2021
2021
2021
2021
2021
2021
2021
2022
2021
2021
2021
2021
2021
2021
2022
2021
2021

Envision
Escalade
Escalade ESV
XT4
XT5
XT6
Blazer
Camaro
Equinox
Express
Malibu
Suburban
Tahoe
Acadia
Savana
Terrain
Yukon
Yukon XL

To
2022
2021
2021
2023
2022
2022
2021
2021
2022
2021
2021
2021
2021
2022
2021
2022
2021
2021

Investigate Vehicle History (IVH) in the GM Global Warranty Management system MUST always be checked to confirm
vehicle involvement and MUST be in OPEN status prior to beginning any required inspections and/or repairs. DO NOT
use Service Information with VIN search, as it will not verify the VIN eligibility for field actions.
Condition
Correction

General Motors has decided to conduct a Voluntary Emission Recall. Certain vehicles listed above
may have a condition which can cause the fuel pump power control module to fail. If this were to
occur, fuel flow to the engine could be interrupted.
Dealers will replace the fuel pump power control module.

Parts
Quantity
1
1

Part Name
Fuel Pump Power Control Module
Fuel Pump Power Control Module

Part No.
13554821
13554820

Note: Use the VIN and the GM Electronic Parts Catalog (EPC) to determine which Fuel Pump Power Control Module to
order.
Reminder: Parts may be removed from SPRINT and Retail Inventory Management (RIM) and be non-returnable. Dealers
should review the affected parts to confirm RIM managed status. Parts may have quantity limiters in effect. There are a
small number of vehicles anticipated that will need this fix. Due to the limited initial parts availability, dealers are
encouraged not to order these parts for use as shelf stock.

Page 1 of 5

Emission Recall
N252516900 Fuel Pump Power Control Module
Warranty Information
Labor
Operation
9108005

9108006
9108007

Description
Fuel Pump Power Control Module Replacement
XT5, XT6, Camaro (LTG), Blazer, Acadia
Equinox, Terrain, Yukon, Tahoe, Suburban, Escalade, Malibu,
Envision, Express, Savana
XT4
Customer Reimbursement Approved
- For USA and Canada dealers only
- For Export dealers only
Customer Reimbursement Denied – For USA dealers only

Labor
Time

Trans.
Type
ZFAT

Net
Item
N/A

ZFAT

*

ZFAT

**

0.3
0.4
0.5
N/A
0.2
N/A

Note: To avoid having to “H” route the customer reimbursement transaction for approval, it must be submitted prior to the
repair transaction.
* For USA & Canada: Submit the dollar amount reimbursed to the Customer in Net/Reimbursement. Submit $20.00 USD
($25.00 CAD) administrative allowance in Net/Admin Allowance.
For Export: Submit the dollar amount reimbursed to the Customer in Net/Reimbursement.
** Submit $10.00 administrative allowance in Net/Admin Allowance.
Service Procedure
Important: Service agents must comply with all International, Federal, State, Provincial, and/or Local laws applicable to
the activities it performs under this bulletin, including but not limited to handling, deploying, preparing, classifying,
packaging, marking, labeling, and shipping dangerous goods. In the event of a conflict between the procedures set forth
in this bulletin and the laws that apply to your dealership, you must follow those applicable laws.
1.

Replace the Fuel Pump Power Control Module. Refer to Fuel Pump Power Control Module Replacement in SI.

2.

CALIFORNIA, COLORADO, CONNECTICUT, DELAWARE, MAINE, MARYLAND, MASSACHUSETTS, NEW
JERSEY, NEW YORK, OREGON, RHODE ISLAND, VERMONT, WASHINGTON VEHICLES ONLY: Install a
Recall Identification Label upon recall completion. See General Motors Service Policies and Procedures Manual,
Recall Identification Label, for details.

3.

CALIFORNIA VEHICLES ONLY: Complete a “Proof of Correction” certificate and provide to the vehicle owner upon
recall completion. For the recall number on the “Proof of Correction” certificate, enter only the six digits in
characters 4-9 of this recall bulletin number: 251690.

Dealer Responsibility
All new, used, GM Certified Pre-Owned (CPO), courtesy transportation vehicles, dealer shuttle vehicles, CarBravo, etc.
in dealers' possession and subject to this recall must be held and inspected/repaired per the service procedure of this
bulletin before customers take possession of these vehicles. Involved vehicles must be held and not delivered to
customers, dealer-traded, released to auction, used for demonstration, or any other purpose.
All GM Certified Pre-Owned (CPO) vehicles currently in the dealers’ inventory within the SHIFT Digital system will be
de-certified and must be held and remedied per the service procedure in this bulletin. Upon submitting an accepted/paid
warranty transaction in the Global Warranty Management (GWM) system, the vehicle can be re-certified for sale within
the SHIFT Digital system, or once again be used in the Courtesy Transportation Program.
Dealers are to service all vehicles subject to this recall at no charge to customers, regardless of mileage, age of vehicle,
or ownership, from this time forward.
Customers who have recently purchased vehicles sold from your vehicle inventory, and for which there is no customer
information indicated on the dealer listing, are to be contacted by the dealer. Arrangements are to be made to make the
required correction according to the instructions contained in this bulletin. A copy of the customer letter is provided in this
bulletin for your use in contacting customers. Recall follow-up cards should not be used for this purpose, since the
customer may not as yet have received the notification letter.
In summary, whenever a vehicle subject to this recall enters your vehicle inventory you must take the steps necessary to
ensure the program correction has been made before selling the vehicle. In addition, for vehicles entering your facility for
service, you are required to ensure the customer is aware of the open recall and make every reasonable effort to
implement the program correction as set forth in this bulletin prior to releasing the vehicle.
Page 2 of 5

Emission Recall
N252516900 Fuel Pump Power Control Module
***THE FOLLOWING 2 PARAGRAPHS ARE NOT FOR CANADA OR EXPORT***
When a California emissions recall is completed by a GM dealer, the dealer must provide the vehicle owner a “Proof of
Correction Certificate” which the owner may need to present to the California Department of Motor Vehicles (DMV) when
renewing their vehicle registration. Without this correction certificate, the owner may be unable to renew their vehicle
registration.
Additional Certificates can be obtained, at no charge, from the 1Store application in Global Connect. Request GM Item
Number 1825 when ordering.
Dealer Reports – For USA
For dealers with involved vehicles, a listing has been prepared and will be available through GM Global Connect Maxis
Field Action Reports or GWM Field Action Batch Search Report. The Inventory tab of the dealer reports will contain
VINs that apply to this field action. This information is intended to assist dealers with the PROMPT COMPLETION of
these vehicles. The Customer In-Service tab will contain customer names and addresses from Motor Vehicle
Registration Records. The use of such motor vehicle registration data for any purpose other than follow-up necessary
to complete this field action may be a violation of law in several states.
Courtesy Transportation
USA - For repairs covered under this Field Action, Courtesy Transportation can be made available ONLY if the
customer/vehicle qualify for Courtesy Transportation per Bulletin 07-00-89-037.
Canada - Courtesy transportation is available for customers whose vehicles are involved in a product program and still
within the warranty coverage period. See General Motors Service Policies and Procedures Manual for courtesy
transportation program details. Refer to the most current Home Office Letter (YYYY-604) on the Courtesy
Transportation Program for details.
Customer Notification
USA & Canada - General Motors will notify customers of this recall on their vehicle (see copy of sample customer letter
included with this bulletin).
In order to ensure full protection under the emission warranty, and the right to participate in future recalls, the customer
notification letter recommends that customers have their vehicles serviced as soon as possible. It also advises that failure
to do so could legally be determined to be lack of proper maintenance. The vehicle may fail a state or local emission
inspection test if the recall work is not completed.
Customer Reimbursement
Customer requests for reimbursement of previously paid repairs to correct the condition described in this bulletin are to
be submitted to the dealer prior to or by November 30, 2026. See General Motors Service Policies and Procedures
Manual (USA & Canada) or local Policies and Procedures, for details.

GM bulletins are intended for use by professional technicians, NOT a "do-it-yourselfer". They are written to inform these technicians of
conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained
technicians have the tools, equipment, safety instructions, and know-how to do a job properly and safely. If a condition is described, DO NOT
assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See your dealer for information on whether your
vehicle may benefit from the information.

We Support
Voluntary Technician
Certification

Page 3 of 5

Emission Recall
N252516900 Fuel Pump Power Control Module

This notice applies to your vehicle, VIN: _____________________________________
Dear General Motors Customer:
This notice is sent to inform you that General Motors is conducting a voluntary emission recall that includes your
vehicle.
Reason For This Recall: Certain vehicles may have a condition which can cause the fuel pump power control module
to fail. If this were to occur, fuel flow to the engine could be interrupted.
What Will Be Done: Your GM dealer will replace the fuel pump power control module. This service will be performed
for you at no charge. Eligibility for this service will not be denied solely due to your vehicle having non-GM parts or
repairs performed by outlets other than a GM franchised dealer.
How Long Will The Repair Take? Because of service scheduling requirements, it is likely that your dealer will need
your vehicle longer than the actual service correction time of approximately 30 minutes.
What You Should Do: Please contact your GM dealer as soon as possible to arrange a service date and to assure
parts availability. Instructions for making this correction have been sent to your dealer. Please ask your dealer if you
wish to know how much time will be needed to schedule, process, and repair your vehicle.
Reimbursement: Even though you may have previously had repairs for this condition, you will still need to take your
vehicle to your dealer for additional repairs. If you have already paid for repairs for the condition described in this letter,
and those repairs were completed prior to this mailing, please complete the enclosed reimbursement form and
present it to your dealer with all required documents. Working with your dealer will expedite your request, however, if
this is not convenient, you may mail the completed reimbursement form and all required documents to Reimbursement
Department, PO Box 33170, Detroit, MI 48232-5170. The completed form and required documents must be presented
to your dealer or received by the Reimbursement Department by November 30, 2026, unless state law specifies a
longer reimbursement period.
You may schedule your vehicle for repair using the QR code below. For more information about your vehicle, or if you
have questions or concerns that your dealer is unable to resolve, please visit gm.com/service. You can also use your
preferred voice assistant (for example, “Please go to GM.com”), or call the Buick, Chevrolet or GMC Customer
Assistance Center at 1-866-467-9700. For Cadillac, please call 1-800-333-4223.
For the hearing or speech impaired, please contact our Customer Assistance Center using the Telecommunication
Relay Service by dialing 711 then providing the appropriate Customer Assistance Center number for your vehicle.
Emission Law Information: In order to ensure your full protection under the emission warranty made applicable to
your vehicle by state and federal law, and your right to participate in future recalls, it is recommended that you have
your vehicle serviced as soon as possible. Failure to do so could legally be determined to be lack of proper
maintenance of your vehicle. Also, your vehicle may fail a state or local emission inspection if this recall is not
accomplished.

IMPORTANT MESSAGE FOR CALIFORNIA RESIDENTS
The California Air Resources Board (CARB) requires vehicle emission recalls be completed prior to California
registration renewal. Uncorrected emission recalls will result in the inability to renew your California vehicle registration.
At the time of emission recall completion, your California dealer will issue a "Proof of Correction Certificate". Keep this
certificate and, if required, present it to the Department of Motor Vehicles when renewing your California registration as
proof of recall completion.
We are sorry to cause you this inconvenience; however, we have taken this action in the interest of your continued
satisfaction with our products.

Page 4 of 5

Emission Recall
N252516900 Fuel Pump Power Control Module
Regina A. Carto
Vice President
Global Product Safety and Systems
Scan here to
locate a dealer.

Enclosure
GM Recall: N252516900

Page 5 of 5

1


Bestseller No. 1
ANCEL AD310 Classic Enhanced Universal OBD II Scanner Car Engine Fault Code Reader CAN Diagnostic Scan Tool, Read and Clear Error Codes for 1996 or Newer OBD2 Protocol Vehicle (Black)
  • CEL Doctor: The ANCEL AD310 is one of the best-selling OBD II scanners on the market and is recommended by Scotty Kilmer, a YouTuber and auto mechanic. It can easily determine the cause of the check engine light coming on. After repairing the vehicle's problems, it can quickly read and clear diagnostic trouble codes of emission system, read live data & hard memory data, view freeze frame, I/M monitor readiness and collect vehicle information.
  • Sturdy and Compact: Equipped with a 2.5 foot cable made of very thick, flexible insulation. It is important to have a sturdy scanner as it can easily fall to the ground when working in a car. The AD310 OBD2 scanner is a well-constructed mechanic tool with a sleek design. It weighs 12 ounces and measures 8.9 x 6.9 x 1.4 inches. Thanks to its compact design and light weight, transporting the device is not a problem. The buttons are clearly labelled and the screen is large and displays results clearly.
  • Accurate Fast and Easy to Use: The AD310 scanner can help you or your mechanic understand if your car is in good condition, provides exceptionally accurate and fast results, reads and clears engine trouble emission codes in seconds after you fixed the problem. This device will let you know immediately and fix the problem right away without any car knowledge. No need for batteries or a charger, get power directly from the OBDII Data Link Connector in your vehicle.
  • OBDII Protocols and Car Compatibility: Many cheap scan tools do not really support all OBD2 protocols. AD310 scanner as it can support all OBDII protocols such as KWP2000, J1850 VPW, ISO9141, J1850 PWM and CAN. This device also has extensive vehicle compatibility with 1996 US-based, 2000 EU-based and Asian cars, light trucks, SUVs, as well as newer OBD2 and CAN vehicles both domestic and foreign. Pls confirm with our customer service whether it is compatible with your vehicle before purchasing.
  • Home Necessity and Worthy to Own: This is an excellent code reader to travel or home with as it weighs less and it is compact in design. You can easily slide it in your backpack as you head to the garage, or put it on the dashboard, this will be a great fit for you. The AD310 is not only portable, but also accurate and fast in performance. Moreover, it covers various car brands and is suitable for people who just need a code reader to check their car.
Bestseller No. 2
MOTOPOWER MP69033 Car OBD2 Scanner Code Reader Engine Fault Scanner CAN Diagnostic Scan Tool for All OBD II Protocol Cars Since 1996, Yellow
  • Multi-Functions - Practical Multi-Functions OBD2 code reader features built-in OBD2 DTC lookup library, which help you to determine the cause of the engine light, read code, erase code, view freeze frame, I/M ready, vehicle information, data flow, real-time curve, get vehicle speed information, calculate load value, engine coolant temperature, get engine speed.
  • Wide Capability - Supports 9 protocols compatible with most 1996 US-Based, 2000 EU-Based and Asian cars, and newer OBD II & CAN domestic or import vehicles. Supports 6 languages - English,German, Dutch, Spanish, French, Italian.
  • 2.8" LCD Display - Designed with a clear display 2.8" Large LCD screen - white backlight and contrast adjustment. No need any battery or charger, OBD reader gets the power directly from your vehicle through the OBDII Data Link Connector.
  • Compact Design - Car diagnostic scanner is equipped with a 2.5 feet long cable and made of a very thick flexible insulator.There are 6 buttons on OBD2 Scanner:scroll up/down,enter/exit and buttons that quick query VIN vehicle number& the DTC fault code.
  • ABS / Airbag codes NOT Supported - It is able to read and clear check engine information which is part of OBDII system, but it cannot work with non-OBDII systems, including ABS / Airbag / Oil Service Light, etc.
Bestseller No. 3
FOXWELL NT301 OBD2 Scanner Live Data Professional Mechanic OBDII Diagnostic Code Reader Tool for Check Engine Light
  • 【Your Personal CEL Doctor – Read & Clear Engine Codes】The NT301 OBD2 scanner lets you read diagnostic trouble codes (DTCs), check em-issions readiness, turn off your Check Engine Light (CEL) or MIL, reset monitors, and view live data streams. It retrieves your vehicle's VIN instantly. Like all standard OBD2 scanners, it clears codes only after repairs are completed—if the issue persists, the code will return. Designed for DIYers who want to understand what’s really going on under the hood.
  • 【Easy Code Reading – Just Plug & Play】Simply plug into the OBD2 port, turn the ignition to “ON” (engine off), and select the correct menu: Select OBDII-> Wait for seconds-> Select Read codes. For accurate results, ensure your vehicle is compatible and the OBD2 port is free from damage or wiring issues. No batteries needed— powered directly by your car.
  • 【Live Data Graphing & Accuracy for Most OBD2 Vehicles】View and log live sensor data in graph form—monitor oxygen sensors, fuel trims, coolant temp, RPM, and more. Spot trends and suspicious values in real time. Compatible with most 1996+ gasoline cars, light trucks, and SUVs sold in the U.S., as well as many 2000+ European and Asian models. Also works on 12V diesel vehicles equipped with OBD2.
  • 【S-mog Check Helper – Know Your Readiness Status at a Glance】With dedicated I/M readiness hotkeys and a simple Red-Yellow-Green LED indicator, you’ll instantly know if your vehicle is ready for em-issions testing. Built-in speaker provides audio feedback. No guesswork—just confidence before you head to the test center.
  • 【A Must-Have Tool for Every Home Mechanic】Compact, rugged, and ready to use right out of the box. The 2.8” color screen is easy to read, even in daylight. No charging or setup required—just plug into the 16-pin DLC and start diagnosing. Recommended by professional mechanics on YouTube and trusted by DIYers worldwide.

Last update on 2026-03-20 / Affiliate links / Images from Amazon Product Advertising API


 

This product presentation was made with AAWP plugin.

Share to...