NHTSA ID Number: 11028971
Manufacturer Communication Number: 26-01-017G TSB
TSB/Document Date: 2026-02-24
Summary
Certain GV70 (JK1A) vehicles may exhibit a Data Communication Unit (DCU) software error due to the internal timer initialization logic not being implemented. The DCU module may shut down telematics services after one year. This bulletin provides instructions to perform a software update for the DCU module.
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
- Advanced VCI Box, Industry-leading J2534 Pass-Thru...
- High-Speed OEM-Level Diagnostics & Programming: Unlock true...
- Coverage for 17 Car Brands & Ultra Reliability: Works...
- User-Friendly RLink Platform & Expert Support: TOPDON’s...
- 6.6 ft USB-C Cable & Portable Storage Case: The RLink J...
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: 26-01-017G TSB
Replacement Service Bulletin Number:
MFR Communication Date: 2026-02-18
MFR Internal Campaign ID/Software Version: L03G
Communication Type: Service Campaign
NHTSA Components: ELECTRICAL SYSTEM
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
GROUP
NUMBER
CAMPAIGN
26-01-017G
DATE
Technical Service Bulletin
MODEL(S)
FEBRUARY 2026
GV70 (JK1A)
DCU SOFTWARE UPDATE
(LIMITED COVERAGE CAMPAIGN L03G)
SUBJECT:
IMPORTANT
Retailers must perform this field action on all affected vehicles within 5 / 60,000 New Vehicle Limited
Warranty (NVLW) prior to retail delivery to a guest and whenever an affected vehicle is in the shop
for any maintenance or repair. See Warranty Information section for more details.
Access the “Vehicle Information” screen via WebDCS to verify “Warranty Start Date” and ensure the
vehicle is within NVLW, observing mileage prior to any repair work.
Description: Certain GV70 (JK1A) vehicles may exhibit a Data Communication Unit (DCU) software
error due to the internal timer initialization logic not being implemented. The DCU module may shut
down telematics services after one year. This bulletin provides instructions to perform a software update
for the DCU module.
Applicable Vehicles:
Model Year
Model
VIN Start with
2026
GV70 (JK1A)
5NM
Production Dates
01/30/2025 – 08/13/2025
SST Information:
Tool Name
Tool Number
VCI 3
G0VPNNN006
19-Pin Cable
Figure
Remarks
+
VCI 3 comes with
the 19-pin cable
(P/N G1XDDCA020
included here
for reference)
G1XDDCA020
Ordering Information
Website:
https://genesisessentialtools.com/
Email:
Genesistools@snapon.com
VCI 2
Ethernet
Communication
Interface (ECI)
Kit
G1XDDMN002
+
G0XDDMN052
If using VCI 2, the
ECI Kit will be
required to
complete software
updates.
Phone: 1-855-763-6630
Hours: 7 AM – 7 PM CST
NOTE: VCI 2 can NO longer be ordered but can be used for the updates in this TSB.
Circulate To: General Manager, Service Manager, Parts Manager, Warranty Manager, Service
Advisors, Technicians, Body Shop Manager, Fleet Repair
SUBJECT:
DCU SOFTWARE UPDATE
(LIMITED COVERAGE CAMPAIGN
L03G)
GDS Information:
Model
System
Event Number*
Description
GV70 (JK1A)
DCU
1312
JK1A PE DCU LOGIC IMPROVEMENT (NA)
(*or use a later available event as listed in the GDS DCU Update screen if one is available.)
Warranty Information:
Model
Op. Code
Operation
Op.
Time
Causal Part
Nature
Code
Cause
Code
GV70
50DA52R0
DCU Software Update 0.4 M/H
96510-IYNA0
M73
ZZ3
(JK1A)
NOTE 1: Submit claim on Claim Entry Screen as “Campaign” type.
NOTE 2: 5 / 60,000 New Vehicle Limited Warranty (NVLW) applies to the part(s) and repair
procedure(s) outlined in this TSB. Prior to beginning any repair work, ensure the part(s) associated
with the repair procedure are within NVLW, observing mileage and Warranty Start Date or date of first
use. If the subject part(s) are out of warranty coverage, the retailer has the option to submit a PA
Request for goodwill consideration on a case-by-case basis.
NOTE 3: If any part(s) not subject to this TSB are found in need of replacement while performing the
repair procedure, and the affected part(s) are still under warranty, the retailer may submit a separate
claim using the same repair order. If the part(s) not subject to this TSB are out of warranty coverage,
the retailer has the option to submit a PA Request for goodwill consideration on a case-by-case basis.
NOTE 4: This TSB includes repair validation photos. Op times include VIN, mileage, and photo
capture of the ECU Update “Success” result screen as outlined in the Digital Documentation Policy.
ROM ID Information:
Model
Event
System
ECU
Part Number
GV70
(JK1A)
1312
DCU
96510-IYNA0
TSB #: 26-01-017G
ROM ID
Current
Latest
120.CA.011870.011870
120.CA.011951.011951
120.NA.012054.012054
Page 2 of 8
SUBJECT:
DCU SOFTWARE UPDATE
(LIMITED COVERAGE CAMPAIGN
L03G)
Service Procedure:
DIGITAL DOCUMENTATION
This TSB includes repair validation photos. Refer to the latest Warranty Digital Documentation
Policy for requirements.
NOTICE
Perform the GDS ECU update in Auto Mode.
•
If the ECU update fails in Auto Mode, perform the update in Manual Mode to recover.
NOTICE
Ensure the vehicle’s battery charge is above 11.0 Volts and the tablet’s battery charge is above
30% before performing a software update to avoid failure.
i
Information
•
Turn OFF all lamps (do NOT leave head lamp switch in auto mode) and accessories.
•
Perform update with the ignition switch in the ON position.
•
Do NOT disconnect any cables connected to the vehicle or scan tool during the update.
•
Do NOT start the engine during the update.
•
Do NOT turn OFF the ignition switch during the update.
TSB #: 26-01-017G
Page 3 of 8
SUBJECT:
DCU SOFTWARE UPDATE
(LIMITED COVERAGE CAMPAIGN
L03G)
Configuration of Ethernet Communication on Tablet
VCI 2 Connection (must use ECI kit with USB-C cable attachment):
1.
Connect the ECI DLC connector to the OBD
connector of the vehicle.
2.
Connect the VCI to the receiver module on the
ECI cable.
3.
Connect the ECI cable with the USB-C
connector cable attachment to the tablet.
VCI 3 Connection (use VCI 3 cable):
1.
Connect the 19-pin connector to the bottom of
the VCI 3.
2.
Connect the VCI to the OBD connector of the
vehicle.
3.
Connect the cable with the USB-C connector
to the tablet.
i
•
Information
If using VCI 2, please wait for the Wi-Fi Direct timer to complete to ensure the Wi-Fi Direct
connection is established. Do NOT select Bluetooth Only.
TSB #: 26-01-017G
Page 4 of 8
SUBJECT:
DCU SOFTWARE UPDATE
(LIMITED COVERAGE CAMPAIGN
L03G)
ECU Update Procedure
1.
Enter the following digits exactly as shown for
IP address, DNS address, Netmask and
Default gateway.
Save and close.
i
Information
Ensure the following IP settings on your
tablet matches the below before
proceeding with the software update.
2.
Perform the ECU update in Auto Mode.
i
Information
Refer to TSB # 25-GI-020G, “ECU
Update Procedure for Tablet-Based
Genesis Smart”, for additional
information.
TSB #: 26-01-017G
Page 5 of 8
SUBJECT:
3.
DCU SOFTWARE UPDATE
(LIMITED COVERAGE CAMPAIGN
L03G)
Verify the ROM ID by selecting the DCU
system to scan the vehicle’s current ROM ID.
NOTICE
Check the current ROM ID version and
compare it to the ROM ID Information
table before attempting to perform the
software update.
NOTICE
If the update fails, remove the power
connector from the in-cabin fuse box for
at least 5 seconds. Reassemble and
retry the update.
4.
Once the ECU update is 100% complete,
follow the prompts on the screen to cycle the
ignition OFF for at least 10 seconds to reset
the control unit (certain models may take up to
30 seconds).
i
Information
Use the Refresh button to reset the
timer.
TSB #: 26-01-017G
Page 6 of 8
SUBJECT:
5.
DCU SOFTWARE UPDATE
(LIMITED COVERAGE CAMPAIGN
OTA initialization (A) should perform
automatically:
• If OTA initialization performs
automatically, then proceed with the
service procedure.
•
L03G)
A
If the OTA initialization process fails,
complete it manually under:
S/W Management > CCU_CCNF Central Communication Unit (CCNF)
> OTA Initialization (B).
Follow the instructions on the screen.
B
6.
DIGITAL
DOCUMENTATION
Using the tablet or GDS screen capture
function, take a screenshot of the ECU
Update “Success” result screen.
Upload the photo to STUI.
NOTE: The VIN/Date/Time/Mileage photo
imprint is NOT required for GDS
screenshots.
TSB #: 26-01-017G
Page 7 of 8
SUBJECT:
DCU SOFTWARE UPDATE
(LIMITED COVERAGE CAMPAIGN
7.
Perform an All Systems Fault Code search
and erase DTC history that had incidentally
occurred from the ECU update.
8.
Start the engine to confirm proper operation of
the vehicle.
9.
The service procedure is now complete.
L03G)
NOTICE
If the ECU update fails in Auto Mode, perform the update in Manual Mode using the password(s)
below.
Manual Mode Password:
Event
EC U Menu
Password
1312
JK1A PE DCU 96510-ARNA0
9279
TSB #: 26-01-017G
Page 8 of 8
- CEL Doctor: The ANCEL AD310 is one of the best-selling OBD II scanners on the market and is recommended by Scotty Kilmer, a YouTuber and auto mechanic. It can easily determine the cause of the check engine light coming on. After repairing the vehicle's problems, it can quickly read and clear diagnostic trouble codes of emission system, read live data & hard memory data, view freeze frame, I/M monitor readiness and collect vehicle information.
- Sturdy and Compact: Equipped with a 2.5 foot cable made of very thick, flexible insulation. It is important to have a sturdy scanner as it can easily fall to the ground when working in a car. The AD310 OBD2 scanner is a well-constructed mechanic tool with a sleek design. It weighs 12 ounces and measures 8.9 x 6.9 x 1.4 inches. Thanks to its compact design and light weight, transporting the device is not a problem. The buttons are clearly labelled and the screen is large and displays results clearly.
- Accurate Fast and Easy to Use: The AD310 scanner can help you or your mechanic understand if your car is in good condition, provides exceptionally accurate and fast results, reads and clears engine trouble emission codes in seconds after you fixed the problem. This device will let you know immediately and fix the problem right away without any car knowledge. No need for batteries or a charger, get power directly from the OBDII Data Link Connector in your vehicle.
- OBDII Protocols and Car Compatibility: Many cheap scan tools do not really support all OBD2 protocols. AD310 scanner as it can support all OBDII protocols such as KWP2000, J1850 VPW, ISO9141, J1850 PWM and CAN. This device also has extensive vehicle compatibility with 1996 US-based, 2000 EU-based and Asian cars, light trucks, SUVs, as well as newer OBD2 and CAN vehicles both domestic and foreign. Pls confirm with our customer service whether it is compatible with your vehicle before purchasing.
- Home Necessity and Worthy to Own: This is an excellent code reader to travel or home with as it weighs less and it is compact in design. You can easily slide it in your backpack as you head to the garage, or put it on the dashboard, this will be a great fit for you. The AD310 is not only portable, but also accurate and fast in performance. Moreover, it covers various car brands and is suitable for people who just need a code reader to check their car.
- Multi-Functions - Practical Multi-Functions OBD2 code reader features built-in OBD2 DTC lookup library, which help you to determine the cause of the engine light, read code, erase code, view freeze frame, I/M ready, vehicle information, data flow, real-time curve, get vehicle speed information, calculate load value, engine coolant temperature, get engine speed.
- Wide Capability - Supports 9 protocols compatible with most 1996 US-Based, 2000 EU-Based and Asian cars, and newer OBD II & CAN domestic or import vehicles. Supports 6 languages - English,German, Dutch, Spanish, French, Italian.
- 2.8" LCD Display - Designed with a clear display 2.8" Large LCD screen - white backlight and contrast adjustment. No need any battery or charger, OBD reader gets the power directly from your vehicle through the OBDII Data Link Connector.
- Compact Design - Car diagnostic scanner is equipped with a 2.5 feet long cable and made of a very thick flexible insulator.There are 6 buttons on OBD2 Scanner:scroll up/down,enter/exit and buttons that quick query VIN vehicle number& the DTC fault code.
- ABS / Airbag codes NOT Supported - It is able to read and clear check engine information which is part of OBDII system, but it cannot work with non-OBDII systems, including ABS / Airbag / Oil Service Light, etc.
- 【Your Personal CEL Doctor – Read & Clear Engine Codes】The NT301 OBD2 scanner lets you read diagnostic trouble codes (DTCs), check em-issions readiness, turn off your Check Engine Light (CEL) or MIL, reset monitors, and view live data streams. It retrieves your vehicle's VIN instantly. Like all standard OBD2 scanners, it clears codes only after repairs are completed—if the issue persists, the code will return. Designed for DIYers who want to understand what’s really going on under the hood.
- 【Easy Code Reading – Just Plug & Play】Simply plug into the OBD2 port, turn the ignition to “ON” (engine off), and select the correct menu: Select OBDII-> Wait for seconds-> Select Read codes. For accurate results, ensure your vehicle is compatible and the OBD2 port is free from damage or wiring issues. No batteries needed— powered directly by your car.
- 【Live Data Graphing & Accuracy for Most OBD2 Vehicles】View and log live sensor data in graph form—monitor oxygen sensors, fuel trims, coolant temp, RPM, and more. Spot trends and suspicious values in real time. Compatible with most 1996+ gasoline cars, light trucks, and SUVs sold in the U.S., as well as many 2000+ European and Asian models. Also works on 12V diesel vehicles equipped with OBD2.
- 【S-mog Check Helper – Know Your Readiness Status at a Glance】With dedicated I/M readiness hotkeys and a simple Red-Yellow-Green LED indicator, you’ll instantly know if your vehicle is ready for em-issions testing. Built-in speaker provides audio feedback. No guesswork—just confidence before you head to the test center.
- 【A Must-Have Tool for Every Home Mechanic】Compact, rugged, and ready to use right out of the box. The 2.8” color screen is easy to read, even in daylight. No charging or setup required—just plug into the 16-pin DLC and start diagnosing. Recommended by professional mechanics on YouTube and trusted by DIYers worldwide.
Last update on 2026-03-20 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.