CAN 26-004 Service Campaign

Sa CJ Gl) Ga —=e™
Jayco "2° * Heartiann 27" sTaRCRAFT
February 24, 2026

Chassis Advisory Notice 26-004

IMPORTANT FORD CHASSIS RECALL INFORMATION

Ford Safety Recall 26C01 / 26V025
Name

Address

City, St. Zip
Dear Valued Dealer,
This notice is sent to your dealership to advise that Ford Motor Company is recalling certain

2025 Model Year F-53 Recreational Motorhome Stripped Chassis and F-59 Commercial

Stripped Chassis vehicles, each built on a chassis supplied by Ford, including the VIN shown

below, fail to conform to Federal Motor Vehicle Safety Standard (FMVSS) 108 - Lamps,

reflective devices, and associated equipment.
The stop lamp switch that controls your vehicle’s brake lights may have been installed

incorrectly, which could lead to potential damage to the switch. A damaged stop lamp switch

may cause exterior brake lamps not to illuminate when the brake pedal is pressed, or to

illuminate without the brake pedal being pressed. Additionally, features such as cruise control

and trailer-tow may not operate correctly. A damaged switch could also make it possible to shift

out of Park without pressing the brake pedal. Brake lamps that do not function correctly increase

the risk of a crash. The vehicle also may shift out of Park without pressing the brake pedal,

which can cause the vehicle to roll unexpectedly, increasing the risk of a crash or injury.
Parts are now available to repair your vehicle. Ford Motor Company has authorized your

Ford dealer to replace the stop lamp switch free of charge.
Our records show the following unit is affected by this recall and is part of the current inventory

at your dealership. Please call your Ford dealer without delay and request a service date for

Recall 26C01. Provide the Ford dealer with your VIN, which is printed below in this letter,

Please contact your Ford dealer for an appointment to have the vehicle remedied as soon as

practicable. If you do not already have a service dealer, you can access ford.com/support for

dealer addresses, maps, and driving instructions.
Please review the enclosed Ford Motor Company Recall Notification Letter. If you have

questions about this recall, contact the Ford Customer Relationship Center at 1-800-444-3311.
Ford Motor Company Vehicle Identification Number: VIN

Thank you for your attention to this important matter.

Sincerely,
Compliance Management

Jayco Inc. Motorized Division

DP
Ford Motor Company _

Customer Service Division

PO Box 1904
Dearborn, Michigan 48121
771505232658 A/1/000001/1
JOHN A. SAMPLE

123 SAMPLE ST February 2026

SAMPLE CITY, MI 12345-6789
*** IMPORTANT SAFETY RECALL * * *
Compliance Recall Notice 26C01 / NHTSA Recall 26V025
2025 Commercial Chassis

This Notice Applies to Your Vehicle, Vehicle Identification Number (VIN): iis
This notice is sent to you in accordance with the National Traffic and Motor Vehicle Safety Act.
Ford Motor Company has decided that certain 2025 Model Year F-53 Recreational Motorhome Stripped

Chassis and F-59 Commercial Stripped Chassis vehicles, each built on a chassis supplied by Ford,

including the VIN shown above, fail to conform to Federal Motor Vehicle Safety Standard (FMVSS) 108

- Lamps, reflective devices, and associated equipment.
We apologize for this situation and want to assure you that, with your assistance, we will correct this

condition. Our commitment, together with your dealer, is to provide you with the highest level of service

and support.
What is the issue? The stoplamp switch that controls your vehicle’s brake lights may have been

installed incorrectly, which could lead to potential damage to the switch. A

damaged stoplamp switch may cause exterior brake lamps not to illuminate

when the brake pedal is pressed, or to illuminate without the brake pedal

being pressed. Additionally, features such as cruise control and trailer-tow

may not operate correctly. A damaged switch could also make it possible to

shift out of Park without pressing the brake pedal.
What is the risk? Brake lamps that do not function correctly increase the risk of a crash. Your

vehicle also may shift out of Park without pressing the brake pedal, which can

cause the vehicle to roll unexpectedly, increasing the risk of a crash or injury.
What will Ford and Parts are now available to repair your vehicle. Ford Motor Company has

your dealer do? authorized your dealer to replace the stoplamp switch free of charge.
How long will it take? The time needed for this repair is less than one-half day. However, due to

service scheduling requirements, your dealer may need your vehicle for a

longer period of time.
What should you do? Please call your dealer without delay and request a service date for Recall

26C01. Provide the dealer with your VIN, which is printed near your name at

the beginning of this letter.
Ford has not issued instructions to stop driving your vehicle under this

compliance recall. You should contact your dealer for an appointment to have

your vehicle remedied as soon as practicable.
If you do not already have a servicing dealer, you can access

ford.com/support for dealer addresses, maps, and driving instructions.
Ford Motor Company wants you to have this compliance recall completed on

your vehicle. The vehicle owner is responsible for making arrangements to

have the work completed. Ford Motor Company can deny coverage for any

vehicle damage that may result from the failure to have this recall performed

on a timely basis. Therefore, please have this recall performed as soon as

possible.
Please note: Federal law requires that any vehicle lessor receiving this

recall notice must forward a copy of this notice to the lessee within ten

days.
10f4 00359
A/1/000004/1

© Copyright 2026 Ford Motor Company 28001 NWDTB126C011

What should you do? + NOTE: You can receive information about Recalls and Customer Satisfaction
(continued) Programs through our Ford App. The app can be downloaded through the App

Store or Google Play. In addition, there are other features such as reserving

parking in certain locations and controlling certain functions on your vehicle

{lock or unlock doors, remote start) if it is equipped to allow control.
Mobile Service Ford Mobile Service is offered by participating dealers, contact your dealer for

details.
Pickup and Delivery Complimentary vehicle Pickup & Delivery service may also be available upon

request through participating dealers. Your dealer will pick up your vehicle and

return it with the repair completed.
Have you previously — If you have previously paid for a repair that addresses the issue described in

paid for this repair? this letter, you still need to have this recall performed to ensure the correct

part was used,
You may be eligible for a refund of previously paid repairs. Refunds will only

be provided for service related to stopiamp switch replacement. To verify

eligibility and expedite reimbursement, give your paid original receipt to your

dealer.
Refund requests may also be sent directly to Ford Motor Company. To

request your refund from Ford, send the refund request with all required

documentation, including your original repair receipt (no photocopies), to Ford

Motor Company at PO Box 6251, Dearborn, Michigan 48121-6251. Refund

requests mailed to this address may take up to GO days to process. Your

original receipt will be returned to you.
Detailed information regarding eligibility for Ford's reimbursement program

and documentation requirements may be obtained by contacting the Fard

Recall Assistance Center at 1-866-436-7332.
What if you no longer = If you no longer own this vehicle and have an address for the current owner,

own this vehicle? please forward this letier to the new owner.
You received this notice because government regulations require that

notification be sent to the last known owner of record. Our records are based

primarily on state registration and title data, which indicate that you are the

current owner or lessee.
Can we assist you If you have difficulties getting your vehicle repaired promptiy and without

further? charge, please contact your dealership’s Service Manager for assistance.
If you have questions or concerns, please contact our Ford Recall

Assistance Genter (RAC} at 1-866-436-7332 and one of our representatives

will be happy to assist you. The RAC is open on weekdays from 8:30 AM —

7:00 PM (Eastern Time}. TTY/TDD users, please contact the RAC at the

number listed using the Telecommunication Relay Service by dialing 711.
If you wish to contact us through the internet, our address is ford.com/support.
MOTORHOME OWNERS: If you have questions or concerns, please contact

our Motorhome Customer Assistance Center toll-free at 1-800-444-3311.

Representatives are available 24 hours a day.
If you are still having difficulty getting your vehicle repaired in a reasonable

time or without charge, you may write the Administrator, National Highway

Traffic Safety Administration, 1200 New Jersey Ave. S.E., Washington, D.C.

20590 or cail the toll-free Vehicle Safety Hotline at 1-888-327-4236
(TTY: 1-888-275-9171) or go to NHTSA.gov, Reference NHTSA Safety Recail

26V025.
Thank you for your attention to this important matter.
Customer Service Division
20f4 00369
AJ2/000001/1

® Copyright 2026 Ford Motor Company 26C01_NUDTBT26C011

Bestseller No. 1

ANCEL AD310 Classic Enhanced Universal OBD II Scanner Car Engine Fault Code Reader CAN Diagnostic Scan Tool, Read and Clear Error Codes for 1996 or Newer OBD2 Protocol Vehicle (Black)

CEL Doctor: The ANCEL AD310 is one of the best-selling OBD II scanners on the market and is recommended by Scotty Kilmer, a YouTuber and auto mechanic. It can easily determine the cause of the check engine light coming on. After repairing the vehicle's problems, it can quickly read and clear diagnostic trouble codes of emission system, read live data & hard memory data, view freeze frame, I/M monitor readiness and collect vehicle information.
Sturdy and Compact: Equipped with a 2.5 foot cable made of very thick, flexible insulation. It is important to have a sturdy scanner as it can easily fall to the ground when working in a car. The AD310 OBD2 scanner is a well-constructed mechanic tool with a sleek design. It weighs 12 ounces and measures 8.9 x 6.9 x 1.4 inches. Thanks to its compact design and light weight, transporting the device is not a problem. The buttons are clearly labelled and the screen is large and displays results clearly.
Accurate Fast and Easy to Use: The AD310 scanner can help you or your mechanic understand if your car is in good condition, provides exceptionally accurate and fast results, reads and clears engine trouble emission codes in seconds after you fixed the problem. This device will let you know immediately and fix the problem right away without any car knowledge. No need for batteries or a charger, get power directly from the OBDII Data Link Connector in your vehicle.
OBDII Protocols and Car Compatibility: Many cheap scan tools do not really support all OBD2 protocols. AD310 scanner as it can support all OBDII protocols such as KWP2000, J1850 VPW, ISO9141, J1850 PWM and CAN. This device also has extensive vehicle compatibility with 1996 US-based, 2000 EU-based and Asian cars, light trucks, SUVs, as well as newer OBD2 and CAN vehicles both domestic and foreign. Pls confirm with our customer service whether it is compatible with your vehicle before purchasing.
Home Necessity and Worthy to Own: This is an excellent code reader to travel or home with as it weighs less and it is compact in design. You can easily slide it in your backpack as you head to the garage, or put it on the dashboard, this will be a great fit for you. The AD310 is not only portable, but also accurate and fast in performance. Moreover, it covers various car brands and is suitable for people who just need a code reader to check their car.

Bestseller No. 2

MOTOPOWER MP69033 Car OBD2 Scanner Code Reader Engine Fault Scanner CAN Diagnostic Scan Tool for All OBD II Protocol Cars Since 1996, Yellow

Multi-Functions - Practical Multi-Functions OBD2 code reader features built-in OBD2 DTC lookup library, which help you to determine the cause of the engine light, read code, erase code, view freeze frame, I/M ready, vehicle information, data flow, real-time curve, get vehicle speed information, calculate load value, engine coolant temperature, get engine speed.
Wide Capability - Supports 9 protocols compatible with most 1996 US-Based, 2000 EU-Based and Asian cars, and newer OBD II & CAN domestic or import vehicles. Supports 6 languages - English,German, Dutch, Spanish, French, Italian.
2.8" LCD Display - Designed with a clear display 2.8" Large LCD screen - white backlight and contrast adjustment. No need any battery or charger, OBD reader gets the power directly from your vehicle through the OBDII Data Link Connector.
Compact Design - Car diagnostic scanner is equipped with a 2.5 feet long cable and made of a very thick flexible insulator.There are 6 buttons on OBD2 Scanner:scroll up/down,enter/exit and buttons that quick query VIN vehicle number& the DTC fault code.
ABS / Airbag codes NOT Supported - It is able to read and clear check engine information which is part of OBDII system, but it cannot work with non-OBDII systems, including ABS / Airbag / Oil Service Light, etc.

Bestseller No. 3

FOXWELL NT301 OBD2 Scanner Live Data Professional Mechanic OBDII Diagnostic Code Reader Tool for Check Engine Light

【Your Personal CEL Doctor – Read & Clear Engine Codes】The NT301 OBD2 scanner lets you read diagnostic trouble codes (DTCs), check em-issions readiness, turn off your Check Engine Light (CEL) or MIL, reset monitors, and view live data streams. It retrieves your vehicle's VIN instantly. Like all standard OBD2 scanners, it clears codes only after repairs are completed—if the issue persists, the code will return. Designed for DIYers who want to understand what’s really going on under the hood.
【Easy Code Reading – Just Plug & Play】Simply plug into the OBD2 port, turn the ignition to “ON” (engine off), and select the correct menu: Select OBDII-> Wait for seconds-> Select Read codes. For accurate results, ensure your vehicle is compatible and the OBD2 port is free from damage or wiring issues. No batteries needed— powered directly by your car.
【Live Data Graphing & Accuracy for Most OBD2 Vehicles】View and log live sensor data in graph form—monitor oxygen sensors, fuel trims, coolant temp, RPM, and more. Spot trends and suspicious values in real time. Compatible with most 1996+ gasoline cars, light trucks, and SUVs sold in the U.S., as well as many 2000+ European and Asian models. Also works on 12V diesel vehicles equipped with OBD2.
【S-mog Check Helper – Know Your Readiness Status at a Glance】With dedicated I/M readiness hotkeys and a simple Red-Yellow-Green LED indicator, you’ll instantly know if your vehicle is ready for em-issions testing. Built-in speaker provides audio feedback. No guesswork—just confidence before you head to the test center.
【A Must-Have Tool for Every Home Mechanic】Compact, rugged, and ready to use right out of the box. The 2.8” color screen is easy to read, even in daylight. No charging or setup required—just plug into the 16-pin DLC and start diagnosing. Recommended by professional mechanics on YouTube and trusted by DIYers worldwide.

Last update on 2026-03-20 / Affiliate links / Images from Amazon Product Advertising API

This product presentation was made with AAWP plugin.

Buffer Copy Email Facebook Flipboard Hacker News LinkedIn Messenger Mix Pinterest Print Reddit SMS Telegram Tumblr X VK WhatsApp Line Xing Threads