NHTSA ID Number: 11027631
TSB Date: 2026-01-14
Manufacturer Communication Number: 21-005-26
Summary
Flash: Transmission Control Module (TCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle may exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● P0826-00 - Up/Down Shift Switch. ● P0827-00 - Up/down Shift Switch Circuit Low. ● P085F-00 - Up And Down Shift Switch Circuit Range/performance. Customers may also experience one or more of the following: ● **Customer is unable to switch the ignition to OFF when in Park gear. ● After shifting into Park, the Instrument Panel Cluster (IPC) will display that the transmission is in Neutral.** NOTE: **The transmission will actually be in Park and able to hold the vehicle, but the cluster display would indicate Neutral, preventing the engine from shutting off.** ● Rough/bumpy 2-3 power on upshifts and/or 3-2 coast down shifts. ● Vehicle enters into limp home mode. Other software improvements: ● Decreased sensitivity to DTCs P1D8A and P1D8B. This bulletin involves reprogramming the TCM with the latest available software.
View or Download (TSB) Technical Service Bulletin PDF
Read More...NHTSA ID Number: 11027630
TSB Date: 2026-01-14
Manufacturer Communication Number: 21-004-26
Summary
Flash: Transmission Control Module (TCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle may exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● P0826-00 - Up/Down Shift Switch. ● P0827-00 - Up/down Shift Switch Circuit Low. ● P085F-00 - Up And Down Shift Switch Circuit Range/performance. Customers may also experience one or more of the following: ● **Customer is unable to switch the ignition to OFF when in Park gear. ● After shifting into Park, the Instrument Panel Cluster (IPC) will display that the transmission is in Neutral.** NOTE: **The transmission will actually be in Park and able to hold the vehicle, but the cluster display would indicate Neutral, preventing the engine from shutting off.** ● Rough/bumpy 2-3 power on upshifts and/or 3-2 coast down shifts. ● Vehicle enters into limp home mode. Other software improvements: ● Decreased sensitivity to DTCs P1D8A and P1D8B. This bulletin involves reprogramming the TCM with the latest available software.
View or Download (TSB) Technical Service Bulletin PDF
Read More...NHTSA ID Number: 11027629
TSB Date: 2026-01-14
Manufacturer Communication Number: 21-003-26
Summary
Flash: Transmission Control Module (TCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle may exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● P0826-00 - Up/Down Shift Switch. ● P0827-00 - Up/down Shift Switch Circuit Low. ● P085F-00 - Up And Down Shift Switch Circuit Range/performance. Customers may also experience one or more of the following: ● **Customer is unable to switch the ignition to OFF when in Park gear. ● After shifting into Park, the Instrument Panel Cluster (IPC) will display that the transmission is in Neutral.** NOTE: **The transmission will actually be in Park and able to hold the vehicle, but the cluster display would indicate Neutral, preventing the engine from shutting off.** ● Rough/bumpy 2-3 power on upshifts and/or 3-2 coast down shifts. ● Vehicle enters into limp home mode. Other software improvements: ● Decreased sensitivity to DTCs P1D8A and P1D8B. This bulletin involves reprogramming the TCM with the latest available software.
View or Download (TSB) Technical Service Bulletin PDF
Read More...NHTSA ID Number: 11027628
TSB Date: 2026-01-14
Manufacturer Communication Number: 21-002-26
Summary
Flash: Transmission Control Module (TCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle may exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● P0826-00 - Up/Down Shift Switch. ● P0827-00 - Up/down Shift Switch Circuit Low. ● P085F-00 - Up And Down Shift Switch Circuit Range/performance. Customers may also experience one or more of the following: ● **Customer is unable to switch the ignition to OFF when in Park gear. ● After shifting into Park, the Instrument Panel Cluster (IPC) will display that the transmission is in Neutral.** NOTE: **The transmission will actually be in Park and able to hold the vehicle, but the cluster display would indicate Neutral, preventing the engine from shutting off.** ● Rough/bumpy 2-3 power on upshifts and/or 3-2 coast down shifts. ● Vehicle enters into limp home mode. Other software improvements: ● Decreased sensitivity to DTCs P1D8A and P1D8B. This bulletin involves reprogramming the TCM with the latest available software.
View or Download (TSB) Technical Service Bulletin PDF
Read More...NHTSA ID Number: 11027627
TSB Date: 2026-01-14
Manufacturer Communication Number: 21-001-26
Summary
Flash: Transmission Control Module (TCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle may exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● P0826-00 - Up/Down Shift Switch. ● P0827-00 - Up/down Shift Switch Circuit Low. ● P085F-00 - Up And Down Shift Switch Circuit Range/performance. Customers may also experience one or more of the following: ● **Customer is unable to switch the ignition to OFF when in Park gear. ● After shifting into Park, the Instrument Panel Cluster (IPC) will display that the transmission is in Neutral.** NOTE: **The transmission will actually be in Park and able to hold the vehicle, but the cluster display would indicate Neutral, preventing the engine from shutting off.** ● Rough/bumpy 2-3 power on upshifts and/or 3-2 coast down shifts. ● Vehicle enters into limp home mode. Other software improvements: ● Decreased sensitivity to DTCs P1D8A and P1D8B. This bulletin involves reprogramming the TCM with the latest available software.
View or Download (TSB) Technical Service Bulletin PDF
Read More...NHTSA ID Number: 11027626
TSB Date: 2026-01-14
Manufacturer Communication Number: 08-005-26
Summary
DXR USB Update to v1.4.160 For Mapping Interface Module (MIM) Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● B023C-49 - Dashcam Module 1-Internal Electronic Failure. ● U115C-00 - Lost Communication With ETM. The customer may describe the following: ● Blinking odometer (remains accurate This bulletin involves inspecting and possibly performing two MIM updates. One is a via the DXR USB port and guided through the DXR radio app. The second is a .efd flash via the wiTECH tool
View or Download (TSB) Technical Service Bulletin PDF
Read More...NHTSA ID Number: 11027625
TSB Date: 2026-01-14
Manufacturer Communication Number: 08-004-26
Summary
Flash: Driver Assistant System Module (DASM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● C2206-00 - Vehicle Configuration Mismatch. NOTE: DTC C2206-00 can trigger after a recent aftermarket tire installation or tire modification. This updated software is to address this DTC set by this condition. ● C2318-49 - Front Camera - Internal Electronic Failure. Customers may experience the following: ● "ACC/FCW Unavailable Service Required" message intermittently in the Instrument Panel Cluster (IPC) This bulletin involves reprogramming the DASM with the latest available software.
View or Download (TSB) Technical Service Bulletin PDF
Read More...NHTSA ID Number: 11027624
TSB Date: 2026-01-14
Manufacturer Communication Number: 08-003-26
Summary
DXR USB Update to v1.4.160 For Mapping Interface Module (MIM) Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● B023C-49 - Dashcam Module 1-Internal Electronic Failure. ● U115C-00 - Lost Communication With ETM. The customer may describe the following: ● Blinking odometer (remains accurate This bulletin involves inspecting and possibly performing two MIM updates. One is a via the DXR USB port and guided through the DXR radio app. The second is a .efd flash via the wiTECH tool
View or Download (TSB) Technical Service Bulletin PDF
Read More...NHTSA ID Number: 11027623
TSB Date: 2026-01-14
Manufacturer Communication Number: 08-002-26
Summary
Drivetrain Control Module (DTCM) Updates Customers may experience one or more of the following: ● Rear axle bind during slow speed turning. Feels like the 4WD is active. ● While moving above 5 kph (3.1 mph) transmission goes into limp mode This bulletin involves reprogramming the DTCM with the latest available software.
View or Download (TSB) Technical Service Bulletin PDF
Read More...NHTSA ID Number: 11027622
TSB Date: 2026-01-14
Manufacturer Communication Number: 08-001-26
Summary
Flash: Global Telematics Box Module (TBM) Updates Customers may experience the following: ● Uconnect Box requires service message at start up. This bulletin involves reprogramming the TBM with the latest available software.
View or Download (TSB) Technical Service Bulletin PDF
Read More...
- CEL Doctor: The ANCEL AD310 is one of the best-selling OBD II scanners on the market and is recommended by Scotty Kilmer, a YouTuber and auto mechanic. It can easily determine the cause of the check engine light coming on. After repairing the vehicle's problems, it can quickly read and clear diagnostic trouble codes of emission system, read live data & hard memory data, view freeze frame, I/M monitor readiness and collect vehicle information.
- Sturdy and Compact: Equipped with a 2.5 foot cable made of very thick, flexible insulation. It is important to have a sturdy scanner as it can easily fall to the ground when working in a car. The AD310 OBD2 scanner is a well-constructed mechanic tool with a sleek design. It weighs 12 ounces and measures 8.9 x 6.9 x 1.4 inches. Thanks to its compact design and light weight, transporting the device is not a problem. The buttons are clearly labelled and the screen is large and displays results clearly.
- Accurate Fast and Easy to Use: The AD310 scanner can help you or your mechanic understand if your car is in good condition, provides exceptionally accurate and fast results, reads and clears engine trouble emission codes in seconds after you fixed the problem. This device will let you know immediately and fix the problem right away without any car knowledge. No need for batteries or a charger, get power directly from the OBDII Data Link Connector in your vehicle.
- OBDII Protocols and Car Compatibility: Many cheap scan tools do not really support all OBD2 protocols. AD310 scanner as it can support all OBDII protocols such as KWP2000, J1850 VPW, ISO9141, J1850 PWM and CAN. This device also has extensive vehicle compatibility with 1996 US-based, 2000 EU-based and Asian cars, light trucks, SUVs, as well as newer OBD2 and CAN vehicles both domestic and foreign. Pls confirm with our customer service whether it is compatible with your vehicle before purchasing.
- Home Necessity and Worthy to Own: This is an excellent code reader to travel or home with as it weighs less and it is compact in design. You can easily slide it in your backpack as you head to the garage, or put it on the dashboard, this will be a great fit for you. The AD310 is not only portable, but also accurate and fast in performance. Moreover, it covers various car brands and is suitable for people who just need a code reader to check their car.
- Multi-Functions - Practical Multi-Functions OBD2 code reader features built-in OBD2 DTC lookup library, which help you to determine the cause of the engine light, read code, erase code, view freeze frame, I/M ready, vehicle information, data flow, real-time curve, get vehicle speed information, calculate load value, engine coolant temperature, get engine speed.
- Wide Capability - Supports 9 protocols compatible with most 1996 US-Based, 2000 EU-Based and Asian cars, and newer OBD II & CAN domestic or import vehicles. Supports 6 languages - English,German, Dutch, Spanish, French, Italian.
- 2.8" LCD Display - Designed with a clear display 2.8" Large LCD screen - white backlight and contrast adjustment. No need any battery or charger, OBD reader gets the power directly from your vehicle through the OBDII Data Link Connector.
- Compact Design - Car diagnostic scanner is equipped with a 2.5 feet long cable and made of a very thick flexible insulator.There are 6 buttons on OBD2 Scanner:scroll up/down,enter/exit and buttons that quick query VIN vehicle number& the DTC fault code.
- ABS / Airbag codes NOT Supported - It is able to read and clear check engine information which is part of OBDII system, but it cannot work with non-OBDII systems, including ABS / Airbag / Oil Service Light, etc.
- 【Your Personal CEL Doctor – Read & Clear Engine Codes】The NT301 OBD2 scanner lets you read diagnostic trouble codes (DTCs), check em-issions readiness, turn off your Check Engine Light (CEL) or MIL, reset monitors, and view live data streams. It retrieves your vehicle's VIN instantly. Like all standard OBD2 scanners, it clears codes only after repairs are completed—if the issue persists, the code will return. Designed for DIYers who want to understand what’s really going on under the hood.
- 【Easy Code Reading – Just Plug & Play】Simply plug into the OBD2 port, turn the ignition to “ON” (engine off), and select the correct menu: Select OBDII-> Wait for seconds-> Select Read codes. For accurate results, ensure your vehicle is compatible and the OBD2 port is free from damage or wiring issues. No batteries needed— powered directly by your car.
- 【Live Data Graphing & Accuracy for Most OBD2 Vehicles】View and log live sensor data in graph form—monitor oxygen sensors, fuel trims, coolant temp, RPM, and more. Spot trends and suspicious values in real time. Compatible with most 1996+ gasoline cars, light trucks, and SUVs sold in the U.S., as well as many 2000+ European and Asian models. Also works on 12V diesel vehicles equipped with OBD2.
- 【S-mog Check Helper – Know Your Readiness Status at a Glance】With dedicated I/M readiness hotkeys and a simple Red-Yellow-Green LED indicator, you’ll instantly know if your vehicle is ready for em-issions testing. Built-in speaker provides audio feedback. No guesswork—just confidence before you head to the test center.
- 【A Must-Have Tool for Every Home Mechanic】Compact, rugged, and ready to use right out of the box. The 2.8” color screen is easy to read, even in daylight. No charging or setup required—just plug into the 16-pin DLC and start diagnosing. Recommended by professional mechanics on YouTube and trusted by DIYers worldwide.
Last update on 2026-03-25 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.