NHTSA ID Number: 11028767
TSB Date: 2026-02-12
Manufacturer Communication Number: 21-014-26
Summary
Internal Transmission Wiring Connector Short And **Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must SYMPTOM: exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● P0A3F-00 - Drive Motor A Position Sensor 1 Circuit. ● P0A43-00 - Drive Motor A Position Sensor Circuit Intermittent. ● P0A45-00 - Drive Motor B Position Sensor 1 Circuit. ● P0C1A-00 - Drive Motor B Torque Delivered Performance. Customers may also comment on the following: ● Vehicle is in limp mode.** statement, Claims Data tables,
View or Download (TSB) Technical Service Bulletin PDF
Read More...NHTSA ID Number: 11028766
TSB Date: 2026-02-12
Manufacturer Communication Number: 18-017-26
Summary
Flash: Powertrain Control Module (PCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must SYMPTOM: exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● **P013F-00 - O2 Sensor 2/1 Delayed Response - Lean To Rich Bank. (In Active or Stored status) ● P014A-00 - O2 Sensor 2/2 Delayed Response - Rich to Lean Bank. (In Active or Stored status) ● P013E-00 - O2 Sensor 2/1 Delayed Response - Rich to Lean Bank. (In Active or Stored status)** ● P014B-00 - O2 Sensor 2/2 Delayed Response - Lean To Rich Bank. (In Active or Stored status) ● P06DD-00 - Engine Oil Pressure Control Circuit Performance/Stuck Off.(In Active or Stored status) ● P0073-00 - Ambient Air Temperature Sensor Circuit "A" High. (In Active or Stored status) ● P0071-00 - Ambient Air Temperature Sensor Performance. (In Active or Stored status) ● P2C90-00 - Crankcase Ventilation System - Hose "A" Disconnected. (In Active or Stored status) ● P1CEA-00 - Boost Side EVAP Purge System Performance. (In Active or Stored status) ● P05BD-00 - Stop-Start Mode Switch Range/Performance. (In Active or Stored status) ● P00C6-00 - Fuel Rail Pressure Too Low - Engine Cranking. (In Active or Stored status) ● U0673-00 - Lost Communication With Ion Sense Module.(In Active or Stored status) Customers may also comment on the following: ● Rough running engine. This bulletin involves inspecting and possibly reprogramming the PCM with the latest available software.
View or Download (TSB) Technical Service Bulletin PDF
Read More...NHTSA ID Number: 11028765
TSB Date: 2026-02-12
Manufacturer Communication Number: 18-014-26
Summary
Flash: Powertrain Control Module (PCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must SYMPTOM: exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● **P20CF - 00 Exhaust After treatment Fuel Injector "A" Stuck Open. ● P20DB - 00 Exhaust After treatment Fuel Supply Control Stuck Open. ● U0109 - 00 Lost Communication With Fuel Pump Control Module. ● P1451 - 00 Diesel Particulate Filter System Performance. ● P2463 - 00 Diesel Particulate Filter Restriction - Soot Accumulation Bank 1. ● P2459 - 00 Diesel Particulate Filter Regeneration Too Frequent.** ● P0087-00 - Fuel Rail Pressure Too Low. ● P2540-00 - Low Pressure Fuel System Sensor Circuit Range/performance. ● P2543-00 - Low Pressure Fuel System Sensor Circuit Intermittent. ● P214D-00 - SCR NOX Catalyst Outlet Temperature Too High During Particulate Filter Regeneration. ● P242B-00 - Exhaust Gas Temperature Sensor Circuit Performance - Bank 1 Sensor 3. ● P24DA-00 - Particulate Matter Sensor Exhaust Sample Error Bank 1. ● P20EE-00 - SCR Nox Catalyst Efficiency Below Threshold - Bank 1 Catalyst 1. ● P226C-00 - Turbocharger Boost Control "A" Slow Response. ● P2281-00 - Air Leak Between MAF And Throttle Body. ● P229F-00 - NOX Sensor Circuit Range/performance - Bank 1. ● P0100-00 - Mass Or Volume Air Flow Sensor "A" Circuit. ● P203F-00 - Reductant Level Too Low. ● P0423-00 - Heated Catalyst Efficiency Below Threshold Bank 1. ● P0263-00 - Cylinder 1 Contribution-Balance. ● P0266-00 - Cylinder 2 Contribution-Balance. ● P0269-00 - Cylinder 3 Contribution-Balance. ● P0272-00 - Cylinder 4 Contribution-Balance. ● P0275-00 - Cylinder 5 Contribution-Balance. ● P0278-00 - Cylinder 6 Contribution/Balance. ● P026B-00 - Injection Timing Performance. ● P020A-00 - Cylinder 1 Injection Timing. ● P020B-00 - Cylinder 2 Injection Timing. ● P020C-00 - Cylinder 3 Injection Timing. ● P020D-00 - Cylinder 4 Injection Timing. B18 FSAR-TSB-6872 -2- ● P020E-00 - Cylinder
View or Download (TSB) Technical Service Bulletin PDF
Read More...NHTSA ID Number: 11028764
TSB Date: 2026-02-12
Manufacturer Communication Number: 18-013-26
Summary
Flash: Powertrain Control Module (PCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must SYMPTOM: exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● **P20CF - 00 Exhaust After treatment Fuel Injector "A" Stuck Open. ● P20DB - 00 Exhaust After treatment Fuel Supply Control Stuck Open. ● U0109 - 00 Lost Communication With Fuel Pump Control Module. ● P1451 - 00 Diesel Particulate Filter System Performance. ● P2463 - 00 Diesel Particulate Filter Restriction - Soot Accumulation Bank 1. ● P2459 - 00 Diesel Particulate Filter Regeneration Too Frequent.** ● P0263 - 00 Cylinder 1 Contribution/balance. ● P0266 - 00 Cylinder 2 Contribution-balance. ● P0269 - 00 Cylinder 3 Contribution/balance. ● P0272 - 00 Cylinder 4 Contribution/balance. ● P0275 - 00 Cylinder 5 Contribution/balance. ● P0278 - 00 Cylinder 6 Contribution/balance. ● P026B - 00 Injection Timing Performance. ● P020A - 00 Cylinder 1 Injection Timing. ● P020B - 00 Cylinder 2 Injection Timing. ● P020C - 00 Cylinder 3 Injection Timing. ● P020D - 00 Cylinder 4 Injection Timing. ● P020E - 00 Cylinder 5 Injection Timing. ● P020F - 00 Cylinder 6 Injection Timing. ● P06B9 - 00 Cylinder 1 Glow Plug Circuit Performance. ● P06BA - 00 Cylinder 2 Glow Plug Circuit Performance. ● P06BB - 00 Cylinder 3 Glow Plug Circuit Performance. ● P06BC - 00 Cylinder 4 Glow Plug Circuit Performance. ● P06BD - 00 Cylinder 5 Glow Plug Circuit Performance. ● P06BE - 00 Cylinder 6 Glow Plug Circuit Performance. ● P0072 - 00 Ambient Air Temperature Sensor Circuit "A" Low. ● P0087 - 00 Fuel Rail Pressure Too Low. ● P2540 - 00 Low Pressure Fuel System Sensor Circuit Range/Performance. ● P2543 - 00 Low Pressure Fuel System Sensor Circuit Intermittent. ● P0100 - 00 Mass Or Volume Air Flow Sensor "A" Circuit. B18 FSAR-TSB-6871 -2- ● P203F - 00 Reductant Level Too Low. ● P0423 - 00 Heated Catalyst Efficiency Below Threshold Bank 1. ● P20EE - 00 SCR NOX Catalyst Efficiency Belo
View or Download (TSB) Technical Service Bulletin PDF
Read More...NHTSA ID Number: 11028763
TSB Date: 2026-02-12
Manufacturer Communication Number: 18-012-26 REV.A
Summary
Flash: Powertrain Control Module (PCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must SYMPTOM: exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● P0072-00 - Ambient Air Temperature Sensor Circuit "A" Low. ● P0087-00 - Fuel Rail Pressure Too Low. ● P2540-00 - Low Pressure Fuel System Sensor Circuit Range/Performance. ● P2543-00 - Low Pressure Fuel System Sensor Circuit Intermittent. ● P20EE-00 - SCR Nox Catalyst Efficiency Below Threshold - Bank 1 Catalyst 1. ● P203F-00 - Reductant Level Too Low. ● P2698-00 - Exhaust Aftertreatment Fuel Injector "A" Performance. ● P06B9-00 - Cylinder 1 Glow Plug Circuit Performance. ● P06BA-00 - Cylinder 2 Glow Plug Circuit Performance. ● P06BB-00 - Cylinder 3 Glow Plug Circuit Performance. ● P06BC-00 - Cylinder 4 Glow Plug Circuit Performance. ● P06BD-00 - Cylinder 5 Glow Plug Circuit Performance. ● P06BE-00 - Cylinder 6 Glow Plug Circuit Performance. Customers may also comment on one or more of the following: ● Diesel Exhaust Fluid (DEF) level gauge inaccuracy. ● Poor cold start performance. ● Unable to initiate manual Diesel Particulate Filter (DPF) regen through Electronic Vehicle Information Center (EVIC). ● While using the remote Power Take-Off (PTO) feature, the PTO may not engage or resume operation properly, after disengaging: 1. Engine is running with PTO engaged. 2. Operator is using the equipment, for example a bucket attachment. 3. Operator gets in position, then uses remote start/stop button to turn truck off while they perform a task. 4. The task is completed, then operator is ready to move the bucket so they use remote start/stop to start the engine. 5. The engine starts but PTO does not automatically re-engage so the equipment doesn’t operate. This bulletin involves inspecting and possibly reprogramming the PCM with the latest available software.
View or Download (TSB) Technical Service Bulletin PDF
Read More...NHTSA ID Number: 11028762
TSB Date: 2026-02-12
Manufacturer Communication Number: 08-048-26
Summary
Not applicable to vehicles built for US market. Flash: Drivetrain Control Module (DTCM) Updates Customers may experience the following: SYMPTOM: ● Vehicle does not start due to a depleted battery. This bulletin involves inspecting and possibly reprogramming the DTCM with the latest available software.
View or Download (TSB) Technical Service Bulletin PDF
Read More...NHTSA ID Number: 11028761
TSB Date: 2026-02-12
Manufacturer Communication Number: 08-045-26
Summary
Not applicable to vehicles built for US market. Flash: Power Inverter Module (PIM) Flash Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation SYMPTOM: the technician must find the following Diagnostic Trouble Code (DTC) has been set: ● B3A11-00 - A/C Refrigerant Expansion Valve Actuator Control Circuit Performance. Customers may experience the following: ● Low/weak 12V battery or a no start condition. ● Vehicle unable to charge while key off. This bulletin involves reprogramming the Auxiliary Hybrid Control Processor (AHCP) also known as Power Inverter Module (PIM), with the latest available software. NOTE: This new software level includes the remedy software for safety campaign 95B. If the vehicle
View or Download (TSB) Technical Service Bulletin PDF
Read More...NHTSA ID Number: 11028760
TSB Date: 2026-02-12
Manufacturer Communication Number: 08-044-26
Summary
Flash: Auxiliary Hybrid Control Processor Customers may experience the following: SYMPTOM: ● **The vehicle is not performing a scheduled cabin preconditioning. 'Cabin Preconditioning Unavailable' message present in the Instrument Panel Cluster (IPC) when the scheduled cabin condition is not performed as planned.** , Labor Description, Repair Procedure steps
View or Download (TSB) Technical Service Bulletin PDF
Read More...NHTSA ID Number: 11028759
TSB Date: 2026-02-12
Manufacturer Communication Number: 08-043-26
Summary
Flash: Anti-Lock Brakes (ABS) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must SYMPTOM: exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● U0121-00 - Lost Communication With Anti-lock Brake System (ABS) Control Module. ● U1110 - Lost Vehicle Speed Message. ● U120C - Lost Brake Booster Signal. Customers may also comment one or more of the following: ● The vehicle will not shift out of Park. NOTE: This takes place when the vehicle in on standstill, the driver stays in the car for more than 10 minutes and if the driver presses the Electric Parking Brake (EPB) button. The Electronic Stability Control (ESC) module wakes up in silent mode and if another wake up request occurs (i.e. pedal press, door, ajar etc.) during this time the module locks up in no communication mode and other modules sets DTC against ESC module. ESC won't be operational and vehicle won't be able to shift out of park. ● Antilock Brake System (ABS) light is on in the Instrument Panel Cluster (IPC). This bulletin involves reprogramming the ABS module with the latest available software.
View or Download (TSB) Technical Service Bulletin PDF
Read More...NHTSA ID Number: 11028758
TSB Date: 2026-02-12
Manufacturer Communication Number: 08-042-26
Summary
Flash: Auxiliary Hybrid Control Processor Customers may experience the following: SYMPTOM: ● **The vehicle is not performing a scheduled cabin preconditioning. 'Cabin Preconditioning Unavailable' message present in the Instrment Panel Cluster (IPC) when the scheduled cabin condition is not performed as planned.** , Labor Description, Repair Procedure steps
View or Download (TSB) Technical Service Bulletin PDF
Read More...
- CEL Doctor: The ANCEL AD310 is one of the best-selling OBD II scanners on the market and is recommended by Scotty Kilmer, a YouTuber and auto mechanic. It can easily determine the cause of the check engine light coming on. After repairing the vehicle's problems, it can quickly read and clear diagnostic trouble codes of emission system, read live data & hard memory data, view freeze frame, I/M monitor readiness and collect vehicle information.
- Sturdy and Compact: Equipped with a 2.5 foot cable made of very thick, flexible insulation. It is important to have a sturdy scanner as it can easily fall to the ground when working in a car. The AD310 OBD2 scanner is a well-constructed mechanic tool with a sleek design. It weighs 12 ounces and measures 8.9 x 6.9 x 1.4 inches. Thanks to its compact design and light weight, transporting the device is not a problem. The buttons are clearly labelled and the screen is large and displays results clearly.
- Accurate Fast and Easy to Use: The AD310 scanner can help you or your mechanic understand if your car is in good condition, provides exceptionally accurate and fast results, reads and clears engine trouble emission codes in seconds after you fixed the problem. This device will let you know immediately and fix the problem right away without any car knowledge. No need for batteries or a charger, get power directly from the OBDII Data Link Connector in your vehicle.
- OBDII Protocols and Car Compatibility: Many cheap scan tools do not really support all OBD2 protocols. AD310 scanner as it can support all OBDII protocols such as KWP2000, J1850 VPW, ISO9141, J1850 PWM and CAN. This device also has extensive vehicle compatibility with 1996 US-based, 2000 EU-based and Asian cars, light trucks, SUVs, as well as newer OBD2 and CAN vehicles both domestic and foreign. Pls confirm with our customer service whether it is compatible with your vehicle before purchasing.
- Home Necessity and Worthy to Own: This is an excellent code reader to travel or home with as it weighs less and it is compact in design. You can easily slide it in your backpack as you head to the garage, or put it on the dashboard, this will be a great fit for you. The AD310 is not only portable, but also accurate and fast in performance. Moreover, it covers various car brands and is suitable for people who just need a code reader to check their car.
- Multi-Functions - Practical Multi-Functions OBD2 code reader features built-in OBD2 DTC lookup library, which help you to determine the cause of the engine light, read code, erase code, view freeze frame, I/M ready, vehicle information, data flow, real-time curve, get vehicle speed information, calculate load value, engine coolant temperature, get engine speed.
- Wide Capability - Supports 9 protocols compatible with most 1996 US-Based, 2000 EU-Based and Asian cars, and newer OBD II & CAN domestic or import vehicles. Supports 6 languages - English,German, Dutch, Spanish, French, Italian.
- 2.8" LCD Display - Designed with a clear display 2.8" Large LCD screen - white backlight and contrast adjustment. No need any battery or charger, OBD reader gets the power directly from your vehicle through the OBDII Data Link Connector.
- Compact Design - Car diagnostic scanner is equipped with a 2.5 feet long cable and made of a very thick flexible insulator.There are 6 buttons on OBD2 Scanner:scroll up/down,enter/exit and buttons that quick query VIN vehicle number& the DTC fault code.
- ABS / Airbag codes NOT Supported - It is able to read and clear check engine information which is part of OBDII system, but it cannot work with non-OBDII systems, including ABS / Airbag / Oil Service Light, etc.
- 【Your Personal CEL Doctor – Read & Clear Engine Codes】The NT301 OBD2 scanner lets you read diagnostic trouble codes (DTCs), check em-issions readiness, turn off your Check Engine Light (CEL) or MIL, reset monitors, and view live data streams. It retrieves your vehicle's VIN instantly. Like all standard OBD2 scanners, it clears codes only after repairs are completed—if the issue persists, the code will return. Designed for DIYers who want to understand what’s really going on under the hood.
- 【Easy Code Reading – Just Plug & Play】Simply plug into the OBD2 port, turn the ignition to “ON” (engine off), and select the correct menu: Select OBDII-> Wait for seconds-> Select Read codes. For accurate results, ensure your vehicle is compatible and the OBD2 port is free from damage or wiring issues. No batteries needed— powered directly by your car.
- 【Live Data Graphing & Accuracy for Most OBD2 Vehicles】View and log live sensor data in graph form—monitor oxygen sensors, fuel trims, coolant temp, RPM, and more. Spot trends and suspicious values in real time. Compatible with most 1996+ gasoline cars, light trucks, and SUVs sold in the U.S., as well as many 2000+ European and Asian models. Also works on 12V diesel vehicles equipped with OBD2.
- 【S-mog Check Helper – Know Your Readiness Status at a Glance】With dedicated I/M readiness hotkeys and a simple Red-Yellow-Green LED indicator, you’ll instantly know if your vehicle is ready for em-issions testing. Built-in speaker provides audio feedback. No guesswork—just confidence before you head to the test center.
- 【A Must-Have Tool for Every Home Mechanic】Compact, rugged, and ready to use right out of the box. The 2.8” color screen is easy to read, even in daylight. No charging or setup required—just plug into the 16-pin DLC and start diagnosing. Recommended by professional mechanics on YouTube and trusted by DIYers worldwide.
Last update on 2026-03-20 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.