NHTSA ID Number: 11720737
Complaint Date: 2026-02-26
Fail Date: 2026-02-06
Manufacturer Name: KTM North America, Inc.
Vehicle Make: KTM
Vehicle Model: 390 ADVENTURE R
Model Year: 2026
Summary
1. The Turn Signal Malfunction indicator is randomly triggered. Observation indicates this occurs when the ambient temperature is under 60 degrees. When the error code is displayed, the turn signals are non-functional. 2. The first time this occurred I was several miles from home at dusk. I had to turn onto and off of a highway without turn signals. At that time of day hand signals are not easily seen. This is dangerous. 3. This is the second bike my dealer has recently sold with this issue. The dealer left my bike in an unheated area over night and were able to duplicate the fault the next morning. 4. An incident has been filed with the Manufacturer but they do not have a repair currently. They were aware of the issue. 5. A warning light appears on the TFT dash when the fault is detected.
Read More...NHTSA ID Number: 11720736
Complaint Date: 2026-02-26
Fail Date: 2026-02-26
Manufacturer Name: Ford Motor Company
Vehicle Make: FORD
Vehicle Model: BRONCO SPORT
Model Year: 2022
Summary
February 26, 2026, Concern: Ford Recall 25S76 / NHTSA 25V467 – No remedy available. My vehicle previously had an earlier Ford recall for fuel leakage and fire risk. The dealer installed a drain tube as an interim fix about 18 months ago. Ford has now issued a new recall 25S76 / NHTSA Recall 25V467 August 2025 for a similar hazard involving cracked fuel injectors that can cause fuel to accumulate on the engine. Ford states that parts are not available and has provided no timeline for a permanent repair. Because this is the second fire risk recall for a related issue and the prior fix did not resolve the underlying problem, I am concerned that the manufacturer has not provided a timely or effective remedy. I am requesting that NHTSA review this delay and include my case in its monitoring of this recall.
Read More...NHTSA ID Number: 11720735
Complaint Date: 2026-02-26
Fail Date: 2024-09-01
Manufacturer Name: Chrysler (FCA US, LLC)
Vehicle Make: RAM
Vehicle Model: 1500
Model Year: 2023
Summary
The uconnect 4 system that controls everything on the vehicle will randomly reboot while being driven, disabling safety systems like reverse cameras during the reboot, and leaving the UI for uconnect incomplete after restart is completed so vehicle settings are not available until vehicle has been turned off for over 10 minutes. I believe that this is due to bugged wifi drivers since it seems to reboot when it tries to connect to android auto. I have video of a reboot showing my truck in reverse for exponentially longer than the required two seconds for the camera to come on but it is too large to upload here.
Read More...NHTSA ID Number: 11720734
Complaint Date: 2026-02-26
Fail Date: 2025-10-23
Manufacturer Name: Kia America, Inc.
Vehicle Make: KIA
Vehicle Model: SORENTO
Model Year: 2018
Summary
While on the road driving at 35 MPH, the vehicle started to "bog" and losing power and/or acceleration. Had to immediately drive off the road as there were several vehicles behind. As soon as driving off the road, the vehicle died down and would not start again. The check engine light came on. After several minutes the vehicle started again and drove to a secure area to call the tow truck. If the vehicle died down while in traffic, it would have caused an accident involving several vehicles. If it happened on the freeway, it would have caused a "major accident". The vehicle was towed to the vehicle dealership. It was determined by the vehicle dealership that the "high pressure fuel pump" was faulty and had to be replaced. It took four (4) months for the replacement part to arrive. Another similar dealer said that there were "55 other vehicle owners" waiting on the same part nationwide. It must be an "inherent problem" with the high pressure fuel pump. After replacing the high pressure fuel pump, the vehicle was operating normally.
Read More...NHTSA ID Number: 11720733
Complaint Date: 2026-02-26
Fail Date: 2026-02-26
Manufacturer Name: Tesla, Inc.
Vehicle Make: TESLA
Vehicle Model: MODEL 3
Model Year: 2024
Summary
I continue to experience phantom "forward collision avoidance" warnings. Tesla has looked at this several times, even once charging me $60 to clean the cameras (should be under warranty in my opinion). Latest response to problem: known issue, no known hardware cause. In other words live with it. They even suggested buying FSD package at $1200/yr as a solution! One more than one occasion the TACC and Autosteer disengaged with traffic behind me. Very scary.
Read More...NHTSA ID Number: 11720732
Complaint Date: 2026-02-26
Fail Date: 2026-02-26
Manufacturer Name: Isuzu Motors Limited
Vehicle Make: ISUZU
Vehicle Model: ASCENDER
Model Year: 2007
Summary
The contact owns a 2007 Isuzu Ascender. The contact stated that while the vehicle was parked and turned off, the driver’s side window unexpectedly rolled down. There were no warning lights illuminated. Upon entering the vehicle, the contact noticed an abnormally strong smoky odor inside the vehicle. After inspecting the vehicle, the contact discovered that the driver’s door master window switch module had melted and was inoperable. The contact ordered a replacement part for the failure. The dealer was contacted. The vehicle was not diagnosed or repaired. The dealer informed the contact that the vehicle could not be repaired because the door master window switch module was an older module. The manufacturer was made aware of the failure. The approximate failure mileage was 94,000.
Read More...NHTSA ID Number: 11720731
Complaint Date: 2026-02-26
Fail Date: 2026-02-26
Manufacturer Name: Chrysler (FCA US, LLC)
Vehicle Make: CHRYSLER
Vehicle Model: PACIFICA
Model Year: 2022
Summary
The car randomly gives a warning on the dashboard in red, with red turtle symbol, to pull over and stop safely. A lot of the time we will be on the highway and can't pull over safely. It happens at any speed. 25, 80, 65, etc. It's been happening since we got the vehicle in 2023 and no dealership understands what the issue is even though there are clearly recall repairs for other same make and model of other years surrounding this 2022 model. They keep saying its Keysense but its not locked for speed and that doesnt make sense because it doesnt happen at a high speed only, it happens randomly even in town going slow. They've done the "software update" a fee times, but it's clearly the same problem as the others with the wiring harness. That part needs to be replaced because the patch software fix isn't a solution and its definitely not a safe solution at that.
Read More...NHTSA ID Number: 11720730
Complaint Date: 2026-02-26
Fail Date: 2026-02-26
Manufacturer Name: Subaru of America, Inc.
Vehicle Make: SUBARU
Vehicle Model: CROSSTREK
Model Year: 2026
Summary
Not an 'incident' but seat belt does not adjust low enough for an average short woman (5'1") without draping across lower neck. I have adjusted the slide on side panel to lowest point but seat belt still cuts across neck (not collar bone area). This is standard for all similar cars and I feel a seatbelt across one's neck is a safety concern that needs to be addressed. Adjustments of seat and/or steering wheel make little to no difference on seatbelt across lower neck area. Raising seat makes it difficult to get into vehicle, as it also moves the seat forward when it is raised (and seat position is manual adjustment, not electric anyway - and doesn't make seatbelt much lower - still neck area)....
Read More...NHTSA ID Number: 11720729
Complaint Date: 2026-02-26
Fail Date: 2026-02-26
Manufacturer Name: Ford Motor Company
Vehicle Make: FORD
Vehicle Model: EXPLORER
Model Year: 2015
Summary
The contact owns a 2015 Ford Explorer. The contact stated that the A-pillar had detached. The camera image occasionally failed to display, or the screen was distorted or blank. The contact attempted to clean the screen, but the failure persisted. An unknown camera message was displayed. The contact received notifications of NHTSA Campaign Numbers: 24V031000 (Structure) and 25V695000 (Back Over Prevention). The local dealer was contacted and confirmed that the parts to repair the vehicle were on backorder. The vehicle was not diagnosed or repaired. The manufacturer was not contacted. The failure mileage was approximately 99,000.
Read More...NHTSA ID Number: 11720728
Complaint Date: 2026-02-26
Fail Date: 2026-01-05
Manufacturer Name: Honda (American Honda Motor Co.)
Vehicle Make: HONDA
Vehicle Model: ACCORD
Model Year: 2019
Summary
Approximate date (around January 2026), location (e.g., Newburgh, NY area), and circumstances (e.g., during normal driving). No crash/injury mentioned in my case, but note if it stranded I, required towing, or felt unsafe (e.g., potential for sudden power loss). While driving, all dashboard warning lights came on suddenly. The vehicle experienced rough running/misfires. Dealer diagnosed low coolant, pressure tested the system, and confirmed coolant intrusion into cylinders 2 and 3 due to head gasket failure. This required full head gasket replacement (parts/labor ~$4,567 total before any goodwill). No external leaks noted initially. Concerned this could cause engine stall/overheat while driving, posing a safety risk.” Dashboard lights, possible misfire codes (if any DTCs like P0302/P0303 were pulled), low coolant without visible leaks. dealer diagnosis (Morehead Honda? from Eric Koller), repair done/recommended, cost, and that American Honda provided 35% goodwill (shows it’s out-of-warranty but recognized issue) Only 91000 miles on the vehicle.
Read More...
- CEL Doctor: The ANCEL AD310 is one of the best-selling OBD II scanners on the market and is recommended by Scotty Kilmer, a YouTuber and auto mechanic. It can easily determine the cause of the check engine light coming on. After repairing the vehicle's problems, it can quickly read and clear diagnostic trouble codes of emission system, read live data & hard memory data, view freeze frame, I/M monitor readiness and collect vehicle information.
- Sturdy and Compact: Equipped with a 2.5 foot cable made of very thick, flexible insulation. It is important to have a sturdy scanner as it can easily fall to the ground when working in a car. The AD310 OBD2 scanner is a well-constructed mechanic tool with a sleek design. It weighs 12 ounces and measures 8.9 x 6.9 x 1.4 inches. Thanks to its compact design and light weight, transporting the device is not a problem. The buttons are clearly labelled and the screen is large and displays results clearly.
- Accurate Fast and Easy to Use: The AD310 scanner can help you or your mechanic understand if your car is in good condition, provides exceptionally accurate and fast results, reads and clears engine trouble emission codes in seconds after you fixed the problem. This device will let you know immediately and fix the problem right away without any car knowledge. No need for batteries or a charger, get power directly from the OBDII Data Link Connector in your vehicle.
- OBDII Protocols and Car Compatibility: Many cheap scan tools do not really support all OBD2 protocols. AD310 scanner as it can support all OBDII protocols such as KWP2000, J1850 VPW, ISO9141, J1850 PWM and CAN. This device also has extensive vehicle compatibility with 1996 US-based, 2000 EU-based and Asian cars, light trucks, SUVs, as well as newer OBD2 and CAN vehicles both domestic and foreign. Pls confirm with our customer service whether it is compatible with your vehicle before purchasing.
- Home Necessity and Worthy to Own: This is an excellent code reader to travel or home with as it weighs less and it is compact in design. You can easily slide it in your backpack as you head to the garage, or put it on the dashboard, this will be a great fit for you. The AD310 is not only portable, but also accurate and fast in performance. Moreover, it covers various car brands and is suitable for people who just need a code reader to check their car.
- Multi-Functions - Practical Multi-Functions OBD2 code reader features built-in OBD2 DTC lookup library, which help you to determine the cause of the engine light, read code, erase code, view freeze frame, I/M ready, vehicle information, data flow, real-time curve, get vehicle speed information, calculate load value, engine coolant temperature, get engine speed.
- Wide Capability - Supports 9 protocols compatible with most 1996 US-Based, 2000 EU-Based and Asian cars, and newer OBD II & CAN domestic or import vehicles. Supports 6 languages - English,German, Dutch, Spanish, French, Italian.
- 2.8" LCD Display - Designed with a clear display 2.8" Large LCD screen - white backlight and contrast adjustment. No need any battery or charger, OBD reader gets the power directly from your vehicle through the OBDII Data Link Connector.
- Compact Design - Car diagnostic scanner is equipped with a 2.5 feet long cable and made of a very thick flexible insulator.There are 6 buttons on OBD2 Scanner:scroll up/down,enter/exit and buttons that quick query VIN vehicle number& the DTC fault code.
- ABS / Airbag codes NOT Supported - It is able to read and clear check engine information which is part of OBDII system, but it cannot work with non-OBDII systems, including ABS / Airbag / Oil Service Light, etc.
- 【Your Personal CEL Doctor – Read & Clear Engine Codes】The NT301 OBD2 scanner lets you read diagnostic trouble codes (DTCs), check em-issions readiness, turn off your Check Engine Light (CEL) or MIL, reset monitors, and view live data streams. It retrieves your vehicle's VIN instantly. Like all standard OBD2 scanners, it clears codes only after repairs are completed—if the issue persists, the code will return. Designed for DIYers who want to understand what’s really going on under the hood.
- 【Easy Code Reading – Just Plug & Play】Simply plug into the OBD2 port, turn the ignition to “ON” (engine off), and select the correct menu: Select OBDII-> Wait for seconds-> Select Read codes. For accurate results, ensure your vehicle is compatible and the OBD2 port is free from damage or wiring issues. No batteries needed— powered directly by your car.
- 【Live Data Graphing & Accuracy for Most OBD2 Vehicles】View and log live sensor data in graph form—monitor oxygen sensors, fuel trims, coolant temp, RPM, and more. Spot trends and suspicious values in real time. Compatible with most 1996+ gasoline cars, light trucks, and SUVs sold in the U.S., as well as many 2000+ European and Asian models. Also works on 12V diesel vehicles equipped with OBD2.
- 【S-mog Check Helper – Know Your Readiness Status at a Glance】With dedicated I/M readiness hotkeys and a simple Red-Yellow-Green LED indicator, you’ll instantly know if your vehicle is ready for em-issions testing. Built-in speaker provides audio feedback. No guesswork—just confidence before you head to the test center.
- 【A Must-Have Tool for Every Home Mechanic】Compact, rugged, and ready to use right out of the box. The 2.8” color screen is easy to read, even in daylight. No charging or setup required—just plug into the 16-pin DLC and start diagnosing. Recommended by professional mechanics on YouTube and trusted by DIYers worldwide.
Last update on 2026-03-20 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.