NHTSA ID Number: 11720747
Complaint Date: 2026-02-26
Fail Date: 2021-12-06
Manufacturer Name: Honda (American Honda Motor Co.)
Vehicle Make: ACURA
Vehicle Model: RDX
Model Year: 2013
Summary
The headlights do not produce enough light to see the road. Every time the car is driven at night it is extremely dangerous.
Read More...NHTSA ID Number: 11720746
Complaint Date: 2026-02-26
Fail Date: 2025-02-26
Manufacturer Name: Kia America, Inc.
Vehicle Make: KIA
Vehicle Model: SELTOS
Model Year: 2021
Summary
The contact owns a 2021 Kia Seltos. The contact stated that while driving 65 MPH up a slight hill, the vehicle shuddered significantly and failed to accelerate upon depression of the accelerator pedal. The check engine warning light then started flashing. The driver was able to pull over to the side of the road. The vehicle was taken to Hamlin Automotive on several occasions. The mechanic replaced 4 spark plugs, oil piston rings, and the camshaft; however, the failure persisted. The mechanic advised the contact that the failure might be related to the fuel injectors. Additionally, the mechanic had informed the contact that the vehicle might be experiencing excessive oil consumption. The contact received notification of NHTSA Campaign Number: 25V099000 (Engine and Engine Cooling), and the vehicle was taken to the dealer for recall repair; however, the contact was informed that no issue was found upon inspection of the vehicle. The contact stated that while driving at 65 MPH, the check engine warning light started flashing. The driver pulled over to the side of the road. The vehicle was towed to the independent mechanic, where it was diagnosed and determined that the engine had failed and needed to be replaced. The vehicle was not yet repaired due to the cost. The contact related the failure to the recall. The manufacturer was contacted and referred the contact to the dealer for assistance. The failure mileage was approximately 72,000.
Read More...NHTSA ID Number: 11720745
Complaint Date: 2026-02-26
Fail Date: 2025-10-23
Manufacturer Name: Chrysler (FCA US, LLC)
Vehicle Make: RAM
Vehicle Model: PROMASTER
Model Year: 2023
Summary
The contact owns a 2023 Ram Promaster 3500. The contact received notification of NHTSA Campaign Number: 25V720000 (ENGINE AND ENGINE COOLING); however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The contact had not experienced a failure.
Read More...NHTSA ID Number: 11720744
Complaint Date: 2026-02-26
Fail Date: 1969-12-31
Manufacturer Name: Chrysler (FCA US, LLC)
Vehicle Make: DODGE
Vehicle Model: CHARGER
Model Year: 2007
Summary
i didnt not see any warning lights. till this days Nobody knows what is wrong with the car.
Read More...NHTSA ID Number: 11720743
Complaint Date: 2026-02-26
Fail Date: 2026-02-26
Manufacturer Name: Nissan North America, Inc.
Vehicle Make: NISSAN
Vehicle Model: NV
Model Year: 2016
Summary
While idling, the vehicle shutoff on it’s own and restarted. Then again while stopped at a red light and again while driving to a mechanic. No warnings or indications that this would happen. It put myself and children at risk because the roads are full of snow leaving us no place for us to pull over. Now the air pressure, windshield fluid and traction control lights are on, whereas they were not previously lit. I’m currently at an independent service center waiting for diagnosis. ***Update: The mechanic gave us the code which shows the crankshaft needs to be replaced.
Read More...NHTSA ID Number: 11720742
Complaint Date: 2026-02-26
Fail Date: 2026-02-01
Manufacturer Name: Volkswagen Group of America, Inc.
Vehicle Make: VOLKSWAGEN
Vehicle Model: ATLAS
Model Year: 2023
Summary
Current mileage: 55,000 miles, and the warranty expired at 50,000 miles. Shortly after the expiration, a bunch of warning alerts started to pop up, along with a solid yellow check engine light. I had the error codes read, and it came back as, “P2402 SAE: EVAP System Leak Detection Pump Control Circuit: High." In order for any work to be performed, VW demands a $212 diagnostic fee in order to even determine what is wrong with the vehicle. If the EVAP pump is found to be bad as the code suggests, it would cost anywhere between $700-900 to fix. So, I took to Google to figure out what is going on. There are pages and pages of documentation from other VW drivers who have the exact same issue. So, why has it not been listed as a safety recall yet? That's what I want to know. Many VW drivers reported that they were given a warranty extension for this KNOWN issue, so I thought...that's all it would take for me to be happy. So, I called the same dealership back and was told that my vehicle is ineligible for the warranty extension even though I am experiencing the exact same issue of the people who were given the warranty extension. Many other VW customers have reported this known issue as well because VW is aware of the issue but is not doing anything about it. As far as I know, the car runs fine, but the alerts and check engine light are there every time I start up the car and never go away. The vehicle is available for inspection upon request. My safety and the safety of others is put at risk every time I drive. When I get into my car, several alerts go off. Very distracting and dangerous. When I go to back out of my driveway, the backup camera works for a few seconds and then blacks out and goes back to the main screen and starts beeping new alerts. Very dangerous. As I am driving, all of the alerts are going off again, thus distracting me behind the wheel. With the codes present, it will not allow me to use remote start on either my key FOB or in the app.
Read More...NHTSA ID Number: 11720741
Complaint Date: 2026-02-26
Fail Date: 2025-12-26
Manufacturer Name: Mercedes-Benz USA, LLC
Vehicle Make: MERCEDES-BENZ
Vehicle Model: AMG E43
Model Year: 2018
Summary
The contact owns a 2018 Mercedes-Benz E43 AMG. The contact stated that while driving at an undisclosed speed, the front passenger’s side headlights intermittently inoperative. No warning lights were illuminated. The vehicle was taken to a dealer to be diagnosed; however, the diagnostic result was not available. The vehicle was not repaired. The manufacturer was notified of the failure. The failure mileage was approximately 61,000.
Read More...NHTSA ID Number: 11720740
Complaint Date: 2026-02-26
Fail Date: 2026-02-24
Manufacturer Name: Honda (American Honda Motor Co.)
Vehicle Make: HONDA
Vehicle Model: CR-V
Model Year: 2025
Summary
After driving in snowy or icy conditions, per JL Freed Honda Dealership in Montgomeryville, PA, snow/ice accumulates in drive axel. This causes loud noise when accelerating, and when braking. This happened twice this winter.
Read More...NHTSA ID Number: 11720739
Complaint Date: 2026-02-26
Fail Date: 2026-02-05
Manufacturer Name: Yamaha Motor Corporation, USA
Vehicle Make: YAMAHA
Vehicle Model: MT-09
Model Year: 2025
Summary
The contact owns a 2025 Yamaha TW 200 Motorcycle. The contact stated that while operating the motorcycle, the turn signal malfunctioned and failed to deactivate. The failure was present with the right and left turn signals. The contact stated that after the turn signal switch returned to center and the signal deactivation button was pressed, the turn signal remained activated. The cause of the failure was not determined. The local dealer was notified of the failure. The manufacturer was not yet notified of the failure. The failure mileage was 5.
Read More...NHTSA ID Number: 11720738
Complaint Date: 2026-02-26
Fail Date: 2024-04-20
Manufacturer Name: Chrysler (FCA US, LLC)
Vehicle Make: JEEP
Vehicle Model: GRAND CHEROKEE 4XE
Model Year: 2023
Summary
The contact owns a 2023 Jeep Grand Cherokee 4XE. The contact stated that while driving at an undisclosed speed, the vehicle jerked and failed to accelerate as intended while depressing the accelerator pedal, and occasionally the vehicle stalled. The vehicle was able to be restarted. The message "FORM" was displayed on the screen. The vehicle was taken to the dealer; however, no cause for the failure was found. The contact stated that the failure persisted. The contact received notification of NHTSA Campaign Number: 25V766000 (ENGINE); however, the part to do the recall repair was not yet available. The contact stated that on a separate occasion, the vehicle became difficult to maneuver. No warning lights were illuminated. Occasionally, the infotainment screen displayed a blank screen or glitched intermittently. Most recently, the brake pedal was depressed, but the vehicle failed to stop immediately. No warning lights were illuminated. The vehicle was taken to the dealer; however, no cause for the failure was found. The vehicle was not repaired. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was notified of the failure. The failure mileage was approximately 16,000.
Read More...
- CEL Doctor: The ANCEL AD310 is one of the best-selling OBD II scanners on the market and is recommended by Scotty Kilmer, a YouTuber and auto mechanic. It can easily determine the cause of the check engine light coming on. After repairing the vehicle's problems, it can quickly read and clear diagnostic trouble codes of emission system, read live data & hard memory data, view freeze frame, I/M monitor readiness and collect vehicle information.
- Sturdy and Compact: Equipped with a 2.5 foot cable made of very thick, flexible insulation. It is important to have a sturdy scanner as it can easily fall to the ground when working in a car. The AD310 OBD2 scanner is a well-constructed mechanic tool with a sleek design. It weighs 12 ounces and measures 8.9 x 6.9 x 1.4 inches. Thanks to its compact design and light weight, transporting the device is not a problem. The buttons are clearly labelled and the screen is large and displays results clearly.
- Accurate Fast and Easy to Use: The AD310 scanner can help you or your mechanic understand if your car is in good condition, provides exceptionally accurate and fast results, reads and clears engine trouble emission codes in seconds after you fixed the problem. This device will let you know immediately and fix the problem right away without any car knowledge. No need for batteries or a charger, get power directly from the OBDII Data Link Connector in your vehicle.
- OBDII Protocols and Car Compatibility: Many cheap scan tools do not really support all OBD2 protocols. AD310 scanner as it can support all OBDII protocols such as KWP2000, J1850 VPW, ISO9141, J1850 PWM and CAN. This device also has extensive vehicle compatibility with 1996 US-based, 2000 EU-based and Asian cars, light trucks, SUVs, as well as newer OBD2 and CAN vehicles both domestic and foreign. Pls confirm with our customer service whether it is compatible with your vehicle before purchasing.
- Home Necessity and Worthy to Own: This is an excellent code reader to travel or home with as it weighs less and it is compact in design. You can easily slide it in your backpack as you head to the garage, or put it on the dashboard, this will be a great fit for you. The AD310 is not only portable, but also accurate and fast in performance. Moreover, it covers various car brands and is suitable for people who just need a code reader to check their car.
- Multi-Functions - Practical Multi-Functions OBD2 code reader features built-in OBD2 DTC lookup library, which help you to determine the cause of the engine light, read code, erase code, view freeze frame, I/M ready, vehicle information, data flow, real-time curve, get vehicle speed information, calculate load value, engine coolant temperature, get engine speed.
- Wide Capability - Supports 9 protocols compatible with most 1996 US-Based, 2000 EU-Based and Asian cars, and newer OBD II & CAN domestic or import vehicles. Supports 6 languages - English,German, Dutch, Spanish, French, Italian.
- 2.8" LCD Display - Designed with a clear display 2.8" Large LCD screen - white backlight and contrast adjustment. No need any battery or charger, OBD reader gets the power directly from your vehicle through the OBDII Data Link Connector.
- Compact Design - Car diagnostic scanner is equipped with a 2.5 feet long cable and made of a very thick flexible insulator.There are 6 buttons on OBD2 Scanner:scroll up/down,enter/exit and buttons that quick query VIN vehicle number& the DTC fault code.
- ABS / Airbag codes NOT Supported - It is able to read and clear check engine information which is part of OBDII system, but it cannot work with non-OBDII systems, including ABS / Airbag / Oil Service Light, etc.
- 【Your Personal CEL Doctor – Read & Clear Engine Codes】The NT301 OBD2 scanner lets you read diagnostic trouble codes (DTCs), check em-issions readiness, turn off your Check Engine Light (CEL) or MIL, reset monitors, and view live data streams. It retrieves your vehicle's VIN instantly. Like all standard OBD2 scanners, it clears codes only after repairs are completed—if the issue persists, the code will return. Designed for DIYers who want to understand what’s really going on under the hood.
- 【Easy Code Reading – Just Plug & Play】Simply plug into the OBD2 port, turn the ignition to “ON” (engine off), and select the correct menu: Select OBDII-> Wait for seconds-> Select Read codes. For accurate results, ensure your vehicle is compatible and the OBD2 port is free from damage or wiring issues. No batteries needed— powered directly by your car.
- 【Live Data Graphing & Accuracy for Most OBD2 Vehicles】View and log live sensor data in graph form—monitor oxygen sensors, fuel trims, coolant temp, RPM, and more. Spot trends and suspicious values in real time. Compatible with most 1996+ gasoline cars, light trucks, and SUVs sold in the U.S., as well as many 2000+ European and Asian models. Also works on 12V diesel vehicles equipped with OBD2.
- 【S-mog Check Helper – Know Your Readiness Status at a Glance】With dedicated I/M readiness hotkeys and a simple Red-Yellow-Green LED indicator, you’ll instantly know if your vehicle is ready for em-issions testing. Built-in speaker provides audio feedback. No guesswork—just confidence before you head to the test center.
- 【A Must-Have Tool for Every Home Mechanic】Compact, rugged, and ready to use right out of the box. The 2.8” color screen is easy to read, even in daylight. No charging or setup required—just plug into the 16-pin DLC and start diagnosing. Recommended by professional mechanics on YouTube and trusted by DIYers worldwide.
Last update on 2026-03-20 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.