NHTSA ID Number: 11720768
Complaint Date: 2026-02-26
Fail Date: 2025-09-09
Manufacturer Name: Chrysler (FCA US, LLC)
Vehicle Make: JEEP
Vehicle Model: CHEROKEE
Model Year: 2014
Summary
The contact owns a 2014 Jeep Cherokee. The contact stated that the gear shift indicator lights were illuminated, and the message "Service Shifter" was displayed. The vehicle was taken to CarMax, where the contact was informed that no failure was found; however, the failure persisted. Additionally, while driving at various speeds, the vehicle failed to respond as intended. Upon parking the vehicle in the garage and then starting the vehicle later, the parking brake unintendedly engaged and seized. The vehicle was towed to Dependable Car Care, where it was diagnosed with water intrusion in the parking brake module. The mechanic determined that the parking brake module needed to be replaced, and an electrical connector cleaning was needed. The vehicle was repaired; however, while driving 45 MPH, the failure recurred, causing the vehicle to brake hard. The message "BRAKE" was displayed. The vehicle was pulled over into a parking lot and remained in the parking lot. The vehicle was not repaired. The manufacturer was not notified of the failure. The failure mileage was approximately 118,072.
Read More...NHTSA ID Number: 11720767
Complaint Date: 2026-02-26
Fail Date: 2026-02-01
Manufacturer Name: Ford Motor Company
Vehicle Make: FORD
Vehicle Model: FUSION
Model Year: 2020
Summary
I have a check engine light on due to an issue in the emissions system. The issue is that the purge valve is stuck open. I know that this is an issue that you had a recall on for older models of the ford focus for this same reason. All the systems of a stuck purge valve are the issues I am having with the vehicle.
Read More...NHTSA ID Number: 11720766
Complaint Date: 2026-02-26
Fail Date: 2026-01-01
Manufacturer Name: General Motors, LLC
Vehicle Make: GMC
Vehicle Model: ACADIA
Model Year: 2019
Summary
The contact owns a 2019 GMC Acadia. The contact stated that while attempting to park the vehicle, the gear shifter failed to shift into park(P). The vehicle failed to turn off, with the message "Shift to Park" displayed with an audible chime. The contact was forced to move the gear shifter back and forth before it was recognized that the transmission was in park(P). A dealer was notified of the failure and the contact was provided an estimate for the repair. The vehicle was not yet diagnosed or repaired. The manufacturer was not notified of the failure. The failure mileage was approximately 69,000.
Read More...NHTSA ID Number: 11720765
Complaint Date: 2026-02-26
Fail Date: 2026-02-26
Manufacturer Name: Toyota Motor Corporation
Vehicle Make: TOYOTA
Vehicle Model: CAMRY HYBRID
Model Year: 2026
Summary
The contact owns a 2026 Toyota Camry Hybrid. The contact received notification of NHTSA Campaign Number: 25V869000 (Hybrid Propulsion System); however, the part to do the recall repair was not yet available. The dealer was contacted. The vehicle was not diagnosed or repaired. The dealer informed the contact that parts were not yet available and informed the contact that the vehicle was unsafe to drive. The contact was provided a loaner vehicle. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure.
Read More...NHTSA ID Number: 11720763
Complaint Date: 2026-02-26
Fail Date: 2026-02-23
Manufacturer Name: Toyota Motor Corporation
Vehicle Make: TOYOTA
Vehicle Model: MIRAI
Model Year: 2022
Summary
The contact owns a 2022 Toyota Mirai. The contact stated that while driving approximately 60 MPH, the vehicle started losing motive power. The accelerator pedal was depressed, and the vehicle continued to decelerate. The contact stated that while driving approximately 15-20 MPH, several warning lights were illuminated, and the stability control symbol was displayed, and a yellow flashing warning light was illuminated. The yellow flashing warning light turned red, and the vehicle stalled. The instrument cluster turned black, and the steering wheel became difficult to turn. The contact attempted to restart the vehicle but was unable to shift to park(P). The contact stated that a Police Officer attempted to jumpstart the vehicle, but the vehicle failed to start, and a tow truck company was called for assistance. The vehicle was towed to the residence. The contact replaced the battery and was able to start the vehicle and the a “FCV” and the shift to park(P) message was displayed. The contact called a local dealer and was advised that the vehicle needed to be towed to the dealer for a diagnostic test. The vehicle was not repaired. The manufacturer was not informed of the failure. The failure mileage was approximately 45,000.
Read More...NHTSA ID Number: 11720762
Complaint Date: 2026-02-26
Fail Date: 2026-01-01
Manufacturer Name: Honda (American Honda Motor Co.)
Vehicle Make: HONDA
Vehicle Model: ODYSSEY
Model Year: 2020
Summary
The front-facing camera stopped working, and all associated ADAS systems no longer functioned (Adaptive Cruise Control, Automatic Emergency Braking, Forward Collision Warning, Lane Departure Warning, Lane Keeping Assistance). Several errors needed to be cleared every time the vehicle was started. Our Honda dealership determined that it was a failed Multipurpose Camera (code U3000-49), and that the entire camera unit needed to be replaced and re-calibrated.
Read More...NHTSA ID Number: 11720761
Complaint Date: 2026-02-26
Fail Date: 2026-02-13
Manufacturer Name: Ford Motor Company
Vehicle Make: FORD
Vehicle Model: F-150
Model Year: 2015
Summary
As I was slowing down the truck started to flash the 123456 indicator for the gear. The truck then slipped out of gear and even though I was in drive the truck wouldn’t move. Like I was in neutral. Then with a big bang it started to move again. I stopped and shut the truck off. Started back up and continued to drive to get home. I stopped for a red light and accelerated away from the light and got stuck in the middle of the intersection. I had to shut the truck off in the middle of a state highway then start it again to be able to drive away. It turned out to be a transmission issue from something called the “ Lead Frame Connector.” The dealer says it happens to all of them. It was very sudden and very dangerous.
Read More...NHTSA ID Number: 11720760
Complaint Date: 2026-02-26
Fail Date: 2026-02-25
Manufacturer Name: Ford Motor Company
Vehicle Make: FORD
Vehicle Model: F-150
Model Year: 2022
Summary
10 speed [T]ransmission issue first noticed w/ milage under 10k. [T] would “slam” while downshifting from 5/4/3/2 when coming to stop. Gradually progressing in severity w/ increase of milage. [T] has now started to miss gears when upshifting from 3/4/5/6, causing a brief lag in vehicle movement upon acceleration as the transmission attempts to keep up with applied engine power. Dealer has always stated this as “normal.” Dealer also states they “can’t replicate” the issue, even though it has now become a near-daily occurrence. The vehicle also continues to perform a hard downshift from gears already stated. Vehicle is very well maintained and driven appropriately. The original purchasing dealer did perform a PCM update as well as replace the original PCM module around 40k/mi, but issue still is not resolved and progressively worsening. [T] flush & filter replacement was performed recently with scheduled maintenance and nothing was noted regarding abnormalities. Extended bumper-to-bumper warranty is nearing expiration at 100k/mi. Safety-wise, while entering upon a highway, loss of speed while attempting to enter has caused near misses in the past, even with enough space given to enter with moving traffic behind. Vehicle slamming down while coming to a stop causes faster than anticipated stopping or speed reduction. Please feel free to contact me at [XXX] if you may have any additional questions or details regarding. Thank you! INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
Read More...NHTSA ID Number: 11720759
Complaint Date: 2026-02-26
Fail Date: 2025-12-27
Manufacturer Name: Honda (American Honda Motor Co.)
Vehicle Make: HONDA
Vehicle Model: PILOT
Model Year: 2016
Summary
The contact owns a 2016 Honda Pilot. The contact stated that upon leaving a gas station, there was an abnormal grinding sound coming from the vehicle. There was no warning light illuminated. The vehicle was taken to an independent mechanic, and the contact was informed that the engine rod bearing might be defective and referred the contact to another independent mechanic for assistance. The vehicle was taken to the second independent mechanic who confirmed that the engine rod bearing failure, and the contact was given an estimate for the repair. Neither the dealer nor the manufacturer was notified of the failure. The vehicle was not yet repaired. The failure mileage was approximately 103,000.
Read More...NHTSA ID Number: 11720758
Complaint Date: 2026-02-26
Fail Date: 2022-02-01
Manufacturer Name: General Motors, LLC
Vehicle Make: GMC
Vehicle Model: ACADIA
Model Year: 2019
Summary
My 2019 Acadia often will not turn off because it has a Shift to Park issue. Apparently it is caused by a faulty microswitch in the shifter assembly that fails to signal the Body Control Module when in park, leading to a persistent warning message, inability to turn off the vehicle and battery drain. It has been going on for at least 4 years. It appears there is a recall for this problem but when I search my VIN number a recall does not come up. There are many posts that say "certain" models in years 2017-2019 but why not mine? It is definitely a safety issue because it does not turn off.
Read More...
- CEL Doctor: The ANCEL AD310 is one of the best-selling OBD II scanners on the market and is recommended by Scotty Kilmer, a YouTuber and auto mechanic. It can easily determine the cause of the check engine light coming on. After repairing the vehicle's problems, it can quickly read and clear diagnostic trouble codes of emission system, read live data & hard memory data, view freeze frame, I/M monitor readiness and collect vehicle information.
- Sturdy and Compact: Equipped with a 2.5 foot cable made of very thick, flexible insulation. It is important to have a sturdy scanner as it can easily fall to the ground when working in a car. The AD310 OBD2 scanner is a well-constructed mechanic tool with a sleek design. It weighs 12 ounces and measures 8.9 x 6.9 x 1.4 inches. Thanks to its compact design and light weight, transporting the device is not a problem. The buttons are clearly labelled and the screen is large and displays results clearly.
- Accurate Fast and Easy to Use: The AD310 scanner can help you or your mechanic understand if your car is in good condition, provides exceptionally accurate and fast results, reads and clears engine trouble emission codes in seconds after you fixed the problem. This device will let you know immediately and fix the problem right away without any car knowledge. No need for batteries or a charger, get power directly from the OBDII Data Link Connector in your vehicle.
- OBDII Protocols and Car Compatibility: Many cheap scan tools do not really support all OBD2 protocols. AD310 scanner as it can support all OBDII protocols such as KWP2000, J1850 VPW, ISO9141, J1850 PWM and CAN. This device also has extensive vehicle compatibility with 1996 US-based, 2000 EU-based and Asian cars, light trucks, SUVs, as well as newer OBD2 and CAN vehicles both domestic and foreign. Pls confirm with our customer service whether it is compatible with your vehicle before purchasing.
- Home Necessity and Worthy to Own: This is an excellent code reader to travel or home with as it weighs less and it is compact in design. You can easily slide it in your backpack as you head to the garage, or put it on the dashboard, this will be a great fit for you. The AD310 is not only portable, but also accurate and fast in performance. Moreover, it covers various car brands and is suitable for people who just need a code reader to check their car.
- Multi-Functions - Practical Multi-Functions OBD2 code reader features built-in OBD2 DTC lookup library, which help you to determine the cause of the engine light, read code, erase code, view freeze frame, I/M ready, vehicle information, data flow, real-time curve, get vehicle speed information, calculate load value, engine coolant temperature, get engine speed.
- Wide Capability - Supports 9 protocols compatible with most 1996 US-Based, 2000 EU-Based and Asian cars, and newer OBD II & CAN domestic or import vehicles. Supports 6 languages - English,German, Dutch, Spanish, French, Italian.
- 2.8" LCD Display - Designed with a clear display 2.8" Large LCD screen - white backlight and contrast adjustment. No need any battery or charger, OBD reader gets the power directly from your vehicle through the OBDII Data Link Connector.
- Compact Design - Car diagnostic scanner is equipped with a 2.5 feet long cable and made of a very thick flexible insulator.There are 6 buttons on OBD2 Scanner:scroll up/down,enter/exit and buttons that quick query VIN vehicle number& the DTC fault code.
- ABS / Airbag codes NOT Supported - It is able to read and clear check engine information which is part of OBDII system, but it cannot work with non-OBDII systems, including ABS / Airbag / Oil Service Light, etc.
- 【Your Personal CEL Doctor – Read & Clear Engine Codes】The NT301 OBD2 scanner lets you read diagnostic trouble codes (DTCs), check em-issions readiness, turn off your Check Engine Light (CEL) or MIL, reset monitors, and view live data streams. It retrieves your vehicle's VIN instantly. Like all standard OBD2 scanners, it clears codes only after repairs are completed—if the issue persists, the code will return. Designed for DIYers who want to understand what’s really going on under the hood.
- 【Easy Code Reading – Just Plug & Play】Simply plug into the OBD2 port, turn the ignition to “ON” (engine off), and select the correct menu: Select OBDII-> Wait for seconds-> Select Read codes. For accurate results, ensure your vehicle is compatible and the OBD2 port is free from damage or wiring issues. No batteries needed— powered directly by your car.
- 【Live Data Graphing & Accuracy for Most OBD2 Vehicles】View and log live sensor data in graph form—monitor oxygen sensors, fuel trims, coolant temp, RPM, and more. Spot trends and suspicious values in real time. Compatible with most 1996+ gasoline cars, light trucks, and SUVs sold in the U.S., as well as many 2000+ European and Asian models. Also works on 12V diesel vehicles equipped with OBD2.
- 【S-mog Check Helper – Know Your Readiness Status at a Glance】With dedicated I/M readiness hotkeys and a simple Red-Yellow-Green LED indicator, you’ll instantly know if your vehicle is ready for em-issions testing. Built-in speaker provides audio feedback. No guesswork—just confidence before you head to the test center.
- 【A Must-Have Tool for Every Home Mechanic】Compact, rugged, and ready to use right out of the box. The 2.8” color screen is easy to read, even in daylight. No charging or setup required—just plug into the 16-pin DLC and start diagnosing. Recommended by professional mechanics on YouTube and trusted by DIYers worldwide.
Last update on 2026-03-20 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.