NHTSA ID Number: 11719737
Complaint Date: 2026-02-22
Fail Date: 2025-04-01
Manufacturer Name: Honda (American Honda Motor Co.)
Vehicle Make: HONDA
Vehicle Model: CIVIC
Model Year: 2020
Summary
Clutch started slipping all of a sudden. Check to see if it was under warranty said the warranty had expired because the car was over 36,000 MI did not know about the extended clutch warranty at the time that Honda was extending it due to defective parts so we replaced it ourselves. Upon tear down it was discovered that the clutch disc was only about 30% worn down there were no hot spots in the flywheel or the clutch cover so the problem was related to the holding force of the clutch cover have we continued to drive the car the way it was it would have burnt it up because it would barely move. I've been in Autotech for 50 years never seen a clutch slipping with this much material left on it and the parts in this condition it is obviously a defect with the part and I submitted a claim to Honda and they denied it had I had known Honda would have taken care of it I would have brought it to them.
Read More...NHTSA ID Number: 11719736
Complaint Date: 2026-02-22
Fail Date: 2026-01-25
Manufacturer Name: Chrysler (FCA US, LLC)
Vehicle Make: RAM
Vehicle Model: 1500
Model Year: 2020
Summary
My 2020 Ram 1500 Laramie was parked in my garage. I started it to let it warm up before driving. The garage started filling with smoke and the smell of fire. I backed the truck out of the garage and noticed flames on my backup camera. The 7 way plug was on fire. I quickly shut the truck off as soon as I got it out of the garage. I put water on the fire to get it out before it took over the back end of the truck. I had drove the truck the day before and filled it up with gas so my life and my son's life was as risk knowing there is a electrical issue. It also was parked in our garage when it started smoking and it could of burnt the whole garage and house down if I didn't get it out of there as fast as I did and noticed it burning. I had contacted 3 dealer ships and they all said sorry we can't help you. I decided to contact Ram directly to file a claim. Ram told me specifically not to take it to any dealer and they would look into it. 3 weeks later they sent out an investigator to my house. They took pictures of the truck and the damage. They plugged in a code reader and it didn't throw any codes. I asked the guy for the report and he said he couldn't give me one. I have since heard back from Stellantis and their email said things like this happen and they have declined any further assistance associated with this fire. They than said to contact the insurance. A fire is a safety issue and there is major concerns of safety. I don't feel safe when they said it was safe to drive after they did the investigation. I took it to a dealer ship to have it repaired and it started to smoke twice driving it to the dealership.
Read More...NHTSA ID Number: 11719735
Complaint Date: 2026-02-22
Fail Date: 2026-02-22
Manufacturer Name: Volvo Car USA, LLC
Vehicle Make: VOLVO
Vehicle Model: XC60
Model Year: 2024
Summary
Tire size: 255/40 R21 The original equipment Pirelli Scorpion Zero All Season VOL PNCS tires (255/40 R21 102V, DOT JXB RW582P) on my 2024 Volvo XC60 CPO developed significant tread chunking and active delamination, discovered at approximately 19,225 miles — less than 40% of the expected tire lifespan. Component: Both front tires are available for inspection upon request. Safety risk: Tread chunks are physically separating from the tire at the tread edge. Active delamination at highway speeds presents a serious blowout risk to myself, passengers, and other drivers. Prior symptoms: No warning lamps illuminated. Initial delamination was noticed earlier by a family member but was not fully examined at that time. Upon closer inspection at 19,225 miles, the extent of the tread chunking and delamination on both front tires was confirmed. The condition appears to have been progressive. Additional note: These tires are original equipment and have never been replaced. The vehicle has been driven exclusively on paved roads under normal conditions with no impacts, curb strikes, or overloading. This is consistent with a known manufacturing defect affecting Pirelli Scorpion Zero tires produced in 2021–2022 installed as OEM equipment on Volvo XC60 vehicles.
Read More...NHTSA ID Number: 11719734
Complaint Date: 2026-02-22
Fail Date: 2025-09-10
Manufacturer Name: Volkswagen Group of America, Inc.
Vehicle Make: AUDI
Vehicle Model: Q5
Model Year: 2019
Summary
Component: ENGINE AND ENGINE COOLING Summary: The turbocharger on my 2019 Audi Q5 failed prematurely. The initial check engine light and loss of performance began at approximately 48,000 miles, which is within Audi’s 4-year/50,000-mile powertrain warranty. The condition progressively worsened and the vehicle became difficult to drive safely in traffic due to reduced power and hesitation during acceleration. The turbocharger ultimately required complete replacement at 50,334 miles at a cost of $ 2511.20 This appears to be a premature failure of a major engine component. A sudden loss of power while merging or crossing intersections creates a safety concern. The vehicle has been properly maintained, is completely stock, and has never been modified. No warning was provided prior to the check engine light and rapid performance degradation. I am submitting this complaint because similar turbocharger wastegate failures have been documented in other Volkswagen/Audi vehicles using related engines, and a failure at this mileage should not occur in a properly maintained vehicle. Safety Risk: Reduced engine power and hesitation during acceleration creates a hazardous condition when merging into traffic or crossing intersections. Repair: Turbocharger replacement Repair cost: $ 2511.20 Mileage at repair: 50,334
Read More...NHTSA ID Number: 11719733
Complaint Date: 2026-02-22
Fail Date: 2025-12-20
Manufacturer Name: Chrysler (FCA US, LLC)
Vehicle Make: ALFA ROMEO
Vehicle Model: TONALE
Model Year: 2025
Summary
My sunroof on my 2025 Alfa Romeo Tonale Veroce spontaneously burst as I was driving about 40 mph. Nothing nearby or overhead. It was a loud cracking sound that was startling like a gunshot. Luckily, I had the mesh screen pulled shut so no glass fell on me. I pulled over within a mile to check the damage and take pictures. There was no point of impact as the glass was shattered all around the edge of the seal but still intact in the middle. The dealership said they would fix it as a goodwill gesture but that it wasn't covered under warranty. My new sunroof was to be here in 45 days. I have been waiting 56 days as of this writing. They have not called me since they ordered the part which has me worried and prompted me to report this incident.
Read More...NHTSA ID Number: 11719732
Complaint Date: 2026-02-22
Fail Date: 2026-02-22
Manufacturer Name: Chrysler (FCA US, LLC)
Vehicle Make: RAM
Vehicle Model: 2500
Model Year: 2018
Summary
I am submitting this complaint about Safety Recall C4B / NHTSA 24V‑896 for my 2018 Ram 2500 (VIN: [XXX] ). I am active‑duty military living in Virginia; the truck is registered in Tennessee. FCA’s recall notice says the brake hydraulic control unit (HCU) may fail, causing intermittent then permanent loss of ABS, ESC, and traction control, and that this “may cause a vehicle crash without prior warning.” My truck shows as affected, but I have been unable to get the recall repair. The notice also states that the remedy is “not currently available” and that FCA will contact me when it is. As of February 2026, more than a year after the recall was initiated, I am still being told that parts are unavailable and there is no firm ETA for when the repair can be performed. In the meantime, I continue to drive with a known safety defect FCA has already acknowledged. My truck’s ABS and ESC lights cycle on and off while driving, consistent with the defect description. This creates real concern about whether ABS/ESC will function during emergency braking or low‑traction conditions, especially given that I use the truck for commuting and towing. I am also aware that FCA is reimbursing owners who have already paid out of pocket to replace failed HCUs, which suggests that replacing the HCU is the recognized fix, even as owners like me are told there is “no remedy available” under the recall. This appears to leave many vehicles on the road with a known safety defect and no timely, practical way to obtain the promised free repair. I respectfully request that NHTSA review FCA’s handling of Recall 24V‑896, evaluate whether FCA is providing a remedy within a reasonable time, and consider any enforcement or additional oversight needed to ensure parts are supplied and repairs completed promptly for all affected vehicles. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
Read More...NHTSA ID Number: 11719731
Complaint Date: 2026-02-22
Fail Date: 2026-02-22
Manufacturer Name: General Motors, LLC
Vehicle Make: CHEVROLET
Vehicle Model: EQUINOX
Model Year: 2023
Summary
I can be driving at speeds up to 40 -60mph. The car will just shut down on high way, putting not only myself but children at risk of a crash. The car will start reduced power engine, and the engine will start to stall and completely shut down. I have taken it to nick chevy in tarentum pa multiple times regarding this issue. They state software issue. But every so many months it does it again. Putting my life and children life in danger for just stopping on major highways.
Read More...NHTSA ID Number: 11719730
Complaint Date: 2026-02-22
Fail Date: 2026-02-01
Manufacturer Name: General Motors, LLC
Vehicle Make: GMC
Vehicle Model: YUKON XL
Model Year: 2023
Summary
Engine issue crankshaft problem
Read More...NHTSA ID Number: 11719729
Complaint Date: 2026-02-22
Fail Date: 2026-02-22
Manufacturer Name: Kia America, Inc.
Vehicle Make: KIA
Vehicle Model: CARNIVAL HYBRID
Model Year: 2025
Summary
The vehicle shows a Driver Assistance System Warning randomly. Then the vehicle is unable to accelerate past ~30MPH. We almost got hit when this happened. The warning does not show up in notifications nor does it show up in diagnostics. It gets reverts back to normal when the vehicle is turned off then turned back on. It seems to reset.
Read More...NHTSA ID Number: 11719728
Complaint Date: 2026-02-22
Fail Date: 2026-01-30
Manufacturer Name: Hyundai Motor America
Vehicle Make: HYUNDAI
Vehicle Model: SANTA FE
Model Year: 2025
Summary
NHTSA Complaint Summary Vehicle: 2025 Hyundai Santa Fe Issue: Airbag non‑deployment in a 40‑mph side‑impact collision On January 20, 2026, my 2025 Hyundai Santa Fe was struck by another motorist directly along the driver side awaiting to make a left turn. The other motorist crossed the centerline at an estimated impact speed of approximately 40 mph, according to the police report. The collision caused significant damage along the front and entire driver side of the vehicle. Despite the severity and direct nature of the impact, neither the side curtain airbags nor the front airbags deployed. The impact was so much that the other motorist ended up behind my husband in the left turning lane once he stopped. My husband, who was driving, suffered a head abrasion and a concussion from the force of the impact. Since the crash, he has continued to experience persistent headaches and intermittent dizziness when standing, which began immediately after the collision and have not resolved. The lack of airbag deployment in a high‑energy side‑impact crash raises concerns about a potential malfunction in the airbag sensors or side‑impact detection system. This incident presents a significant safety risk, and I am reporting it so NHTSA can evaluate because as I've researched there have been other incidences of similar non‑deployment issues are with 2025 Hyundai Santa Fe vehicles. I can provide photos, the police report, medical documentation, and repair estimates upon request.
Read More...
- CEL Doctor: The ANCEL AD310 is one of the best-selling OBD II scanners on the market and is recommended by Scotty Kilmer, a YouTuber and auto mechanic. It can easily determine the cause of the check engine light coming on. After repairing the vehicle's problems, it can quickly read and clear diagnostic trouble codes of emission system, read live data & hard memory data, view freeze frame, I/M monitor readiness and collect vehicle information.
- Sturdy and Compact: Equipped with a 2.5 foot cable made of very thick, flexible insulation. It is important to have a sturdy scanner as it can easily fall to the ground when working in a car. The AD310 OBD2 scanner is a well-constructed mechanic tool with a sleek design. It weighs 12 ounces and measures 8.9 x 6.9 x 1.4 inches. Thanks to its compact design and light weight, transporting the device is not a problem. The buttons are clearly labelled and the screen is large and displays results clearly.
- Accurate Fast and Easy to Use: The AD310 scanner can help you or your mechanic understand if your car is in good condition, provides exceptionally accurate and fast results, reads and clears engine trouble emission codes in seconds after you fixed the problem. This device will let you know immediately and fix the problem right away without any car knowledge. No need for batteries or a charger, get power directly from the OBDII Data Link Connector in your vehicle.
- OBDII Protocols and Car Compatibility: Many cheap scan tools do not really support all OBD2 protocols. AD310 scanner as it can support all OBDII protocols such as KWP2000, J1850 VPW, ISO9141, J1850 PWM and CAN. This device also has extensive vehicle compatibility with 1996 US-based, 2000 EU-based and Asian cars, light trucks, SUVs, as well as newer OBD2 and CAN vehicles both domestic and foreign. Pls confirm with our customer service whether it is compatible with your vehicle before purchasing.
- Home Necessity and Worthy to Own: This is an excellent code reader to travel or home with as it weighs less and it is compact in design. You can easily slide it in your backpack as you head to the garage, or put it on the dashboard, this will be a great fit for you. The AD310 is not only portable, but also accurate and fast in performance. Moreover, it covers various car brands and is suitable for people who just need a code reader to check their car.
- Multi-Functions - Practical Multi-Functions OBD2 code reader features built-in OBD2 DTC lookup library, which help you to determine the cause of the engine light, read code, erase code, view freeze frame, I/M ready, vehicle information, data flow, real-time curve, get vehicle speed information, calculate load value, engine coolant temperature, get engine speed.
- Wide Capability - Supports 9 protocols compatible with most 1996 US-Based, 2000 EU-Based and Asian cars, and newer OBD II & CAN domestic or import vehicles. Supports 6 languages - English,German, Dutch, Spanish, French, Italian.
- 2.8" LCD Display - Designed with a clear display 2.8" Large LCD screen - white backlight and contrast adjustment. No need any battery or charger, OBD reader gets the power directly from your vehicle through the OBDII Data Link Connector.
- Compact Design - Car diagnostic scanner is equipped with a 2.5 feet long cable and made of a very thick flexible insulator.There are 6 buttons on OBD2 Scanner:scroll up/down,enter/exit and buttons that quick query VIN vehicle number& the DTC fault code.
- ABS / Airbag codes NOT Supported - It is able to read and clear check engine information which is part of OBDII system, but it cannot work with non-OBDII systems, including ABS / Airbag / Oil Service Light, etc.
- 【Your Personal CEL Doctor – Read & Clear Engine Codes】The NT301 OBD2 scanner lets you read diagnostic trouble codes (DTCs), check em-issions readiness, turn off your Check Engine Light (CEL) or MIL, reset monitors, and view live data streams. It retrieves your vehicle's VIN instantly. Like all standard OBD2 scanners, it clears codes only after repairs are completed—if the issue persists, the code will return. Designed for DIYers who want to understand what’s really going on under the hood.
- 【Easy Code Reading – Just Plug & Play】Simply plug into the OBD2 port, turn the ignition to “ON” (engine off), and select the correct menu: Select OBDII-> Wait for seconds-> Select Read codes. For accurate results, ensure your vehicle is compatible and the OBD2 port is free from damage or wiring issues. No batteries needed— powered directly by your car.
- 【Live Data Graphing & Accuracy for Most OBD2 Vehicles】View and log live sensor data in graph form—monitor oxygen sensors, fuel trims, coolant temp, RPM, and more. Spot trends and suspicious values in real time. Compatible with most 1996+ gasoline cars, light trucks, and SUVs sold in the U.S., as well as many 2000+ European and Asian models. Also works on 12V diesel vehicles equipped with OBD2.
- 【S-mog Check Helper – Know Your Readiness Status at a Glance】With dedicated I/M readiness hotkeys and a simple Red-Yellow-Green LED indicator, you’ll instantly know if your vehicle is ready for em-issions testing. Built-in speaker provides audio feedback. No guesswork—just confidence before you head to the test center.
- 【A Must-Have Tool for Every Home Mechanic】Compact, rugged, and ready to use right out of the box. The 2.8” color screen is easy to read, even in daylight. No charging or setup required—just plug into the 16-pin DLC and start diagnosing. Recommended by professional mechanics on YouTube and trusted by DIYers worldwide.
Last update on 2026-03-25 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.