NHTSA ID Number: 11719627
Complaint Date: 2026-02-21
Fail Date: 2026-02-07
Manufacturer Name: Hyundai Motor America
Vehicle Make: HYUNDAI
Vehicle Model: IONIQ 5
Model Year: 2025
Summary
The ICCU component failed on me at 4,356 miles. Heard a pop with the car and then the dash started displaying electrical errors. To stop the vehicle and turn it off. The vehicle would not accelerate and would only go up to 25 miles per hour. Had to tow it to the dealership. Given a time frame of 30-60 days to receive the ICCU part for repair.
Read More...NHTSA ID Number: 11719626
Complaint Date: 2026-02-21
Fail Date: 2026-02-20
Manufacturer Name: Honda (American Honda Motor Co.)
Vehicle Make: HONDA
Vehicle Model: HR-V
Model Year: 2022
Summary
Window shattered after turning on defrost.
Read More...NHTSA ID Number: 11719625
Complaint Date: 2026-02-21
Fail Date: 2026-02-17
Manufacturer Name: Hyundai Motor America
Vehicle Make: HYUNDAI
Vehicle Model: PALISADE
Model Year: 2021
Summary
OIL FILTER HOUSING IS LEAKING. PLASTIC PART IS WARPED AND DOES NOT ALLOW FILTER TO SEAL. LEAKING OIL IS A FIRE HAZARD AND COULD CAUSE ENGINE FAILURE.
Read More...NHTSA ID Number: 11719624
Complaint Date: 2026-02-21
Fail Date: 2026-02-16
Manufacturer Name: Chrysler (FCA US, LLC)
Vehicle Make: JEEP
Vehicle Model: WRANGLER
Model Year: 2016
Summary
While driving my vehicle on Monday, February 16, 2026 I heard a loud pop come from the front of the vehicle. Right after that smoke began to come through the hood vents. I stopped the vehicle to inspect and at that point the engine compartment was burning heavily. I could barely get out of the vehicle and away before the whole front end of the vehicle was engulfed with fire and heavy black smoke. It looked as if the fire started somewhere on the righthand side of the engine compartment because the right front tire was the first to blow out in the fire. The vehicle is with the insurance company to inspect, but it was in perfect running condition, all maintenance performed. There were no dash warning lights that came on, no odd sounds heard and the vehicle ran until I stopped and shut it office. There has to be something that was wrong with the manufacturing of this specific engine to make a loud pop and burn as hot as it did. I wanted to report this before the vehicle is sent away to be demolished due to it being a complete loss.
Read More...NHTSA ID Number: 11719623
Complaint Date: 2026-02-21
Fail Date: 2025-12-03
Manufacturer Name: Toyota Motor Corporation
Vehicle Make: TOYOTA
Vehicle Model: TACOMA
Model Year: 2025
Summary
MY 2025 TACOMA is part of a recall by Toyota, I was notified of the potential issue on early November 2025 and told Toyota was working on a remedy. On December 3rd, 2025 while using 4-wheel drive during a snow storm the drive shaft (recall issue) broke. On December 4th, 2025, the local Toyota dealer checked my Tacoma and found it unsafe to drive - they kept my Tacoma and provided a loaner vehicle. Toyota reported at this time the remedy would be available by the end of 4th quarter (December). As of today, February 21, 2026 -- there is still no remedy for the issue, my Tacoma is still sitting at the dealer, and I do not have my truck. Toyota reports a remedy will be available during the 1st quarter of the year but nothing yet. I called brand engagement recently and asked them to extend my warranty, Toyota care, and other free trials that were included with my purchase. However, Toyota refuses to do anything further - as they said a loaner car is enough - to make the issue more acceptable even though my new vehicle is losing this coverage.
Read More...NHTSA ID Number: 11719622
Complaint Date: 2026-02-21
Fail Date: 2026-02-15
Manufacturer Name: Hyundai Motor America
Vehicle Make: HYUNDAI
Vehicle Model: SANTA FE SPORT
Model Year: 2013
Summary
Engine seizure. Driving 80mph on i90, pop sound from under the hood happens & check engine light came on; immediately pulled over & the oil and battery light came on; turned car off & it would not start again. Smoke then came from engine while trying to restart. Code 1326
Read More...NHTSA ID Number: 11719621
Complaint Date: 2026-02-21
Fail Date: 2026-02-13
Manufacturer Name: Mazda Motor Corp.
Vehicle Make: MAZDA
Vehicle Model: CX-90
Model Year: 2024
Summary
While turning, the resistance = how heavy is steering, suddenly drop for few millisecond which causes unpredictable understeering , i almost hit the other car on opposite side it happens not every turn but randomly
Read More...NHTSA ID Number: 11719620
Complaint Date: 2026-02-21
Fail Date: 2026-02-20
Manufacturer Name: Honda (American Honda Motor Co.)
Vehicle Make: HONDA
Vehicle Model: CR-V
Model Year: 2024
Summary
Throttle body replacement at only 23294 miles. Replaced under warranty . Did some searching and Honda is aware of coolant seeping into throttle body. This could cause failure while on road or hwy causing injury or death. This issue should have a priority permanent fix as my family is riding in this vehicle. This is unacceptable Thank You for your time into this report
Read More...NHTSA ID Number: 11719619
Complaint Date: 2026-02-21
Fail Date: 2026-02-20
Manufacturer Name: Subaru of America, Inc.
Vehicle Make: SUBARU
Vehicle Model: FORESTER
Model Year: 2017
Summary
After traveling for unknown number of miles on repeated occasions, arriving at the destinations to the smell of burning oil. Smell was evident while driving as well. Subaru was able to diagnose this issue to a leaking CVT pump seal causing CVT fluid to leak and run down on top of the transmission pan onto the hot exhaust system. Subaru has acknowledge this is an issue back in 2016 due to the sealant us from the factory. Customer was quoted $1400 for the repair this known issue. Vehicle had 90,000 miles at the time of occurrence.
Read More...NHTSA ID Number: 11719618
Complaint Date: 2026-02-21
Fail Date: 2026-02-11
Manufacturer Name: General Motors, LLC
Vehicle Make: CHEVROLET
Vehicle Model: EQUINOX
Model Year: 2025
Summary
Was told bad fluid pump at 35k. Replaced. Car broke down 30 seconds from dealer. New transmission to be replaced now. Parts on backorder. Will be without car for “months”. No symptoms prior to failure. No warning lights. Car just wouldn’t start.
Read More...
- CEL Doctor: The ANCEL AD310 is one of the best-selling OBD II scanners on the market and is recommended by Scotty Kilmer, a YouTuber and auto mechanic. It can easily determine the cause of the check engine light coming on. After repairing the vehicle's problems, it can quickly read and clear diagnostic trouble codes of emission system, read live data & hard memory data, view freeze frame, I/M monitor readiness and collect vehicle information.
- Sturdy and Compact: Equipped with a 2.5 foot cable made of very thick, flexible insulation. It is important to have a sturdy scanner as it can easily fall to the ground when working in a car. The AD310 OBD2 scanner is a well-constructed mechanic tool with a sleek design. It weighs 12 ounces and measures 8.9 x 6.9 x 1.4 inches. Thanks to its compact design and light weight, transporting the device is not a problem. The buttons are clearly labelled and the screen is large and displays results clearly.
- Accurate Fast and Easy to Use: The AD310 scanner can help you or your mechanic understand if your car is in good condition, provides exceptionally accurate and fast results, reads and clears engine trouble emission codes in seconds after you fixed the problem. This device will let you know immediately and fix the problem right away without any car knowledge. No need for batteries or a charger, get power directly from the OBDII Data Link Connector in your vehicle.
- OBDII Protocols and Car Compatibility: Many cheap scan tools do not really support all OBD2 protocols. AD310 scanner as it can support all OBDII protocols such as KWP2000, J1850 VPW, ISO9141, J1850 PWM and CAN. This device also has extensive vehicle compatibility with 1996 US-based, 2000 EU-based and Asian cars, light trucks, SUVs, as well as newer OBD2 and CAN vehicles both domestic and foreign. Pls confirm with our customer service whether it is compatible with your vehicle before purchasing.
- Home Necessity and Worthy to Own: This is an excellent code reader to travel or home with as it weighs less and it is compact in design. You can easily slide it in your backpack as you head to the garage, or put it on the dashboard, this will be a great fit for you. The AD310 is not only portable, but also accurate and fast in performance. Moreover, it covers various car brands and is suitable for people who just need a code reader to check their car.
- Multi-Functions - Practical Multi-Functions OBD2 code reader features built-in OBD2 DTC lookup library, which help you to determine the cause of the engine light, read code, erase code, view freeze frame, I/M ready, vehicle information, data flow, real-time curve, get vehicle speed information, calculate load value, engine coolant temperature, get engine speed.
- Wide Capability - Supports 9 protocols compatible with most 1996 US-Based, 2000 EU-Based and Asian cars, and newer OBD II & CAN domestic or import vehicles. Supports 6 languages - English,German, Dutch, Spanish, French, Italian.
- 2.8" LCD Display - Designed with a clear display 2.8" Large LCD screen - white backlight and contrast adjustment. No need any battery or charger, OBD reader gets the power directly from your vehicle through the OBDII Data Link Connector.
- Compact Design - Car diagnostic scanner is equipped with a 2.5 feet long cable and made of a very thick flexible insulator.There are 6 buttons on OBD2 Scanner:scroll up/down,enter/exit and buttons that quick query VIN vehicle number& the DTC fault code.
- ABS / Airbag codes NOT Supported - It is able to read and clear check engine information which is part of OBDII system, but it cannot work with non-OBDII systems, including ABS / Airbag / Oil Service Light, etc.
- 【Your Personal CEL Doctor – Read & Clear Engine Codes】The NT301 OBD2 scanner lets you read diagnostic trouble codes (DTCs), check em-issions readiness, turn off your Check Engine Light (CEL) or MIL, reset monitors, and view live data streams. It retrieves your vehicle's VIN instantly. Like all standard OBD2 scanners, it clears codes only after repairs are completed—if the issue persists, the code will return. Designed for DIYers who want to understand what’s really going on under the hood.
- 【Easy Code Reading – Just Plug & Play】Simply plug into the OBD2 port, turn the ignition to “ON” (engine off), and select the correct menu: Select OBDII-> Wait for seconds-> Select Read codes. For accurate results, ensure your vehicle is compatible and the OBD2 port is free from damage or wiring issues. No batteries needed— powered directly by your car.
- 【Live Data Graphing & Accuracy for Most OBD2 Vehicles】View and log live sensor data in graph form—monitor oxygen sensors, fuel trims, coolant temp, RPM, and more. Spot trends and suspicious values in real time. Compatible with most 1996+ gasoline cars, light trucks, and SUVs sold in the U.S., as well as many 2000+ European and Asian models. Also works on 12V diesel vehicles equipped with OBD2.
- 【S-mog Check Helper – Know Your Readiness Status at a Glance】With dedicated I/M readiness hotkeys and a simple Red-Yellow-Green LED indicator, you’ll instantly know if your vehicle is ready for em-issions testing. Built-in speaker provides audio feedback. No guesswork—just confidence before you head to the test center.
- 【A Must-Have Tool for Every Home Mechanic】Compact, rugged, and ready to use right out of the box. The 2.8” color screen is easy to read, even in daylight. No charging or setup required—just plug into the 16-pin DLC and start diagnosing. Recommended by professional mechanics on YouTube and trusted by DIYers worldwide.
Last update on 2026-03-25 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.