NHTSA ID Number: 11718976
Complaint Date: 2026-02-18
Fail Date: 2026-02-18
Manufacturer Name: Ford Motor Company
Vehicle Make: FORD
Vehicle Model: ECOSPORT
Model Year: 2019
Summary
I am writing to formally file a complaint with the National Highway Traffic Safety Administration regarding an unresolved safety recall on my 2019 Ford EcoSport. On February 18, 2026, at approximately 9:01 A.M., I contacted my local dealership, El Cajon Ford, to schedule the recall repair. I was informed that the required recall parts are on indefinite backorder and that there is no estimated date for availability. This leaves my vehicle unrepaired for a known safety defect with no clear timeline for remedy. Additionally, during that same conversation, I informed the dealership that my check engine light is currently illuminated, which raises further concerns given the open safety recall. I was told that if I bring the vehicle in for diagnostic testing and the issue is determined not to be related to the recall, I would be responsible for a $209 diagnostic fee. I am concerned that this creates a financial barrier to determining whether the warning light may, in fact, be related to the known safety defect. I regularly transport my [XXX] child in this vehicle. Continuing to operate a vehicle subject to an open safety recall — particularly one involving a potentially serious safety-related defect — places my family at unnecessary risk. The indefinite delay in parts availability undermines the purpose of a federally mandated safety recall. Under federal law, manufacturers are required to provide a free and timely remedy for safety-related defects. An open-ended delay with no estimated repair date does not appear to meet that standard and leaves consumers without meaningful protection. I respectfully request that NHTSA review this matter, investigate the delay in recall remedy availability, and take appropriate action to ensure that affected consumers are not required to continue operating potentially unsafe vehicles without a timely repair or interim solution. Thank you for your attention to this serious safety concern. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
Read More...NHTSA ID Number: 11718975
Complaint Date: 2026-02-18
Fail Date: 2026-02-17
Manufacturer Name: Hyundai Motor America
Vehicle Make: HYUNDAI
Vehicle Model: ELANTRA
Model Year: 2022
Summary
The horn on my vehicle all of a sudden does not work. Im afraid that i'll be in a accident because im unable to blow it. Plenty times ive almost been in a accident & it was literally nothing i could do because my horn isnt working. secondly, something is going in with the suspension on the right side of my car. Too much rattling noise. I see in the complaints im not the only one having this issue. third but not least, the ac isnt working. blowing out hot air. ive also seen where alot of people is complaining about that Ive had this car only a year and it has too many recall issues.
Read More...NHTSA ID Number: 11718974
Complaint Date: 2026-02-18
Fail Date: 2026-02-13
Manufacturer Name: Honda (American Honda Motor Co.)
Vehicle Make: HONDA
Vehicle Model: ACCORD
Model Year: 2017
Summary
The multifunction ADAS camera module failed due to "Internal Error" at only 9 years old. This means that critical safety systems such as automatic emergency braking/lane keep assist malfunctioned and could not assist with avoiding collisions. I took the car to the dealer and they confirmed the issue, and charged me $2000 to fix this critical safety system. I noticed that the new camera assembly has an updated part number, indicating that Honda might have been aware of this failure issue. I have also seen some forum posts online of others having this failure with their 2016-2017 Accords with Honda Sensing. Therefore I believe this should warrant a recall. When the failure first occurred upon vehicle startup a few days before I had it repaired, all these systems were disabled and there were multiple warning lamps on the gauge cluster and screen. Prior to this sudden failure, everything had been working fine as intended up until the very day it failed.
Read More...NHTSA ID Number: 11718973
Complaint Date: 2026-02-18
Fail Date: 2026-02-09
Manufacturer Name: Kia America, Inc.
Vehicle Make: KIA
Vehicle Model: SORENTO
Model Year: 2019
Summary
Car would randomly stall and jerk while accelerating. Unsafe to drive. May cause accident. Having to constantly set hazard lights to prevent accident.
Read More...NHTSA ID Number: 11718972
Complaint Date: 2026-02-18
Fail Date: 2026-02-18
Manufacturer Name: UNKNOWN MANUFACTURER
Vehicle Make: UNKNOWN
Vehicle Model: UNKNOWN
Model Year: 9999
Summary
WITHOUT ACCCELERATOR PEDAL BEING DEPRESSED VEHICCLE GOES INTO UNCONTROLLED ACELERATION AT SUCH HIGH LEVEL THAT THE VECHILE CANNOT BE STOPPED/SLOWED BY BRAKING.
Read More...NHTSA ID Number: 11718971
Complaint Date: 2026-02-18
Fail Date: 2026-02-18
Manufacturer Name: Kia America, Inc.
Vehicle Make: KIA
Vehicle Model: TELLURIDE
Model Year: 2021
Summary
I attempted to use my sunroof today 2/18/26 and I heard a popping sound and it sounded like something broke. I rolled the sunroof back closed and now the back of the sunroof (moonroof) is now propped open and won't close. I have tried the manual overide for 10 to 15 seconds and it just makes a clicking sound. I am pretty upset as I have only used my sunroof maybe 10 times in the 4 years I have had the car. After research there is a TSB 319 that clearly documents it is a known problem on 2019 to 2022 Telluride models yet, no recall. While it is not a major safety issue, it is now a concern that when it rains, it will get into my my vehicle causing further damage. This should be a covered repair on Kia's behalf especially when it seems it is happening most often after factory warranty or 60,000 miles for most who are reporting it. Sounds like a scam to get another 5,000 dollars out of their customers. Won't be buying a Kia again.
Read More...NHTSA ID Number: 11718970
Complaint Date: 2026-02-18
Fail Date: 2025-09-15
Manufacturer Name: General Motors, LLC
Vehicle Make: GMC
Vehicle Model: SIERRA 1500
Model Year: 2021
Summary
The failed component is the engine coolant control valve on a 3.0L Duramax truck. The failure has been documented and confirmed by both an independent mechanic and an authorized dealership. The malfunction creates a significant safety hazard. Without warning, the truck will suddenly enter a reduced engine power mode while traveling at normal highway speeds. When this occurs, the vehicle will not allow acceleration beyond approximately 50 miles per hour. This is especially dangerous when operating on roadways with speed limits of 70+ mph, as the sudden and unexpected loss of power places myself and surrounding motorists at risk. The problem has been reproduced and confirmed by Steele GMC in Round Rock, Texas. In addition, the vehicle has been inspected by an independent mechanic, both of whom verified the coolant control valve failure. Prior to the initial occurrence of the failure, there were no warning signs. Once the malfunction occurred, the check engine light illuminated. General Motors has issued Service Bulletin #25-NA-185 (revised December 4, 2025), which addresses engine coolant control valve failures on 3.0L Duramax vehicles and outlines the proper diagnostic and repair procedures for this exact failure mode. This bulletin applies to 2021–2026 3.0L Duramax trucks. Additionally, GM has implemented Special Coverage program N252508341 for 3.0L Duramax coolant control valve failures, which extends coverage up to 15 years or 150,000 miles when diagnostics confirm the failure condition. Despite the fact that my vehicle’s documented failure matches the exact conditions described in the above-referenced service bulletin and special coverage program, I was informed by Steele GMC that my specific VIN is not included in the warranty. Given the documented safety risk, the confirmed diagnosis, and the existence of official GM guidance addressing this precise issue, I respectfully request this be reviewed and appropriate coverage or corrective action be authorized
Read More...NHTSA ID Number: 11718969
Complaint Date: 2026-02-18
Fail Date: 2024-05-02
Manufacturer Name: Toyota Motor Corporation
Vehicle Make: TOYOTA
Vehicle Model: RAV4
Model Year: 2024
Summary
break in the rough road the brake is not working. The car is shaking before break. Looks like break is sleeping. always happen when you drive in the rough road if you need to break, the brake is not working properly. Something is off. It happens always when you drive in the rough road and you need to break
Read More...NHTSA ID Number: 11718968
Complaint Date: 2026-02-18
Fail Date: 2026-02-17
Manufacturer Name: Ford Motor Company
Vehicle Make: FORD
Vehicle Model: ESCAPE
Model Year: 2014
Summary
At less than a thousand miles after purchasing the vehicle the Coolant has begun intruding into the cylinder wall and causing a sweet smelling exhaust from the rear
Read More...NHTSA ID Number: 11718967
Complaint Date: 2026-02-18
Fail Date: 2025-02-10
Manufacturer Name: Ford Motor Company
Vehicle Make: FORD
Vehicle Model: F-150
Model Year: 2017
Summary
Downshift in transmission, now shudder when going 45-70. Started around 65,000 miles now I have around 87,000 miles on it.
Read More...
- CEL Doctor: The ANCEL AD310 is one of the best-selling OBD II scanners on the market and is recommended by Scotty Kilmer, a YouTuber and auto mechanic. It can easily determine the cause of the check engine light coming on. After repairing the vehicle's problems, it can quickly read and clear diagnostic trouble codes of emission system, read live data & hard memory data, view freeze frame, I/M monitor readiness and collect vehicle information.
- Sturdy and Compact: Equipped with a 2.5 foot cable made of very thick, flexible insulation. It is important to have a sturdy scanner as it can easily fall to the ground when working in a car. The AD310 OBD2 scanner is a well-constructed mechanic tool with a sleek design. It weighs 12 ounces and measures 8.9 x 6.9 x 1.4 inches. Thanks to its compact design and light weight, transporting the device is not a problem. The buttons are clearly labelled and the screen is large and displays results clearly.
- Accurate Fast and Easy to Use: The AD310 scanner can help you or your mechanic understand if your car is in good condition, provides exceptionally accurate and fast results, reads and clears engine trouble emission codes in seconds after you fixed the problem. This device will let you know immediately and fix the problem right away without any car knowledge. No need for batteries or a charger, get power directly from the OBDII Data Link Connector in your vehicle.
- OBDII Protocols and Car Compatibility: Many cheap scan tools do not really support all OBD2 protocols. AD310 scanner as it can support all OBDII protocols such as KWP2000, J1850 VPW, ISO9141, J1850 PWM and CAN. This device also has extensive vehicle compatibility with 1996 US-based, 2000 EU-based and Asian cars, light trucks, SUVs, as well as newer OBD2 and CAN vehicles both domestic and foreign. Pls confirm with our customer service whether it is compatible with your vehicle before purchasing.
- Home Necessity and Worthy to Own: This is an excellent code reader to travel or home with as it weighs less and it is compact in design. You can easily slide it in your backpack as you head to the garage, or put it on the dashboard, this will be a great fit for you. The AD310 is not only portable, but also accurate and fast in performance. Moreover, it covers various car brands and is suitable for people who just need a code reader to check their car.
- Multi-Functions - Practical Multi-Functions OBD2 code reader features built-in OBD2 DTC lookup library, which help you to determine the cause of the engine light, read code, erase code, view freeze frame, I/M ready, vehicle information, data flow, real-time curve, get vehicle speed information, calculate load value, engine coolant temperature, get engine speed.
- Wide Capability - Supports 9 protocols compatible with most 1996 US-Based, 2000 EU-Based and Asian cars, and newer OBD II & CAN domestic or import vehicles. Supports 6 languages - English,German, Dutch, Spanish, French, Italian.
- 2.8" LCD Display - Designed with a clear display 2.8" Large LCD screen - white backlight and contrast adjustment. No need any battery or charger, OBD reader gets the power directly from your vehicle through the OBDII Data Link Connector.
- Compact Design - Car diagnostic scanner is equipped with a 2.5 feet long cable and made of a very thick flexible insulator.There are 6 buttons on OBD2 Scanner:scroll up/down,enter/exit and buttons that quick query VIN vehicle number& the DTC fault code.
- ABS / Airbag codes NOT Supported - It is able to read and clear check engine information which is part of OBDII system, but it cannot work with non-OBDII systems, including ABS / Airbag / Oil Service Light, etc.
- 【Your Personal CEL Doctor – Read & Clear Engine Codes】The NT301 OBD2 scanner lets you read diagnostic trouble codes (DTCs), check em-issions readiness, turn off your Check Engine Light (CEL) or MIL, reset monitors, and view live data streams. It retrieves your vehicle's VIN instantly. Like all standard OBD2 scanners, it clears codes only after repairs are completed—if the issue persists, the code will return. Designed for DIYers who want to understand what’s really going on under the hood.
- 【Easy Code Reading – Just Plug & Play】Simply plug into the OBD2 port, turn the ignition to “ON” (engine off), and select the correct menu: Select OBDII-> Wait for seconds-> Select Read codes. For accurate results, ensure your vehicle is compatible and the OBD2 port is free from damage or wiring issues. No batteries needed— powered directly by your car.
- 【Live Data Graphing & Accuracy for Most OBD2 Vehicles】View and log live sensor data in graph form—monitor oxygen sensors, fuel trims, coolant temp, RPM, and more. Spot trends and suspicious values in real time. Compatible with most 1996+ gasoline cars, light trucks, and SUVs sold in the U.S., as well as many 2000+ European and Asian models. Also works on 12V diesel vehicles equipped with OBD2.
- 【S-mog Check Helper – Know Your Readiness Status at a Glance】With dedicated I/M readiness hotkeys and a simple Red-Yellow-Green LED indicator, you’ll instantly know if your vehicle is ready for em-issions testing. Built-in speaker provides audio feedback. No guesswork—just confidence before you head to the test center.
- 【A Must-Have Tool for Every Home Mechanic】Compact, rugged, and ready to use right out of the box. The 2.8” color screen is easy to read, even in daylight. No charging or setup required—just plug into the 16-pin DLC and start diagnosing. Recommended by professional mechanics on YouTube and trusted by DIYers worldwide.
Last update on 2026-03-28 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.