Complaints List


Loading...

Loading...


NHTSA ID Number: 11720007

Complaint Date: 2026-02-23

Fail Date: 2026-02-02

Manufacturer Name: General Motors, LLC

Vehicle Make: CHEVROLET

Vehicle Model: SUBURBAN

Model Year: 2019


Summary

Year: 2019 Make: GMC Model: Suburban Mileage: Approximately 125,000 miles (purchased under 90,000 miles) 1. Transmission Failure My vehicle is experiencing clear signs of transmission failure, including: •Hard downshifting/clunking •RPM fluctuations while cruising •Shuddering between approximately 30–50 mph •Vibrations while idling •Hesitation and irregular shifting These symptoms have progressively worsened and are consistent with widespread complaints I have found from other 2019 Suburban owners. This appears to be a known issue affecting multiple vehicles. 2. Rear Liftgate / Electrical Malfunction The rear trunk/liftgate has closed on its own without warning multiple times. I have personally been struck in the head several times as a result. This presents a serious injury risk, especially for families loading children or cargo. There is clearly an electrical or sensor malfunction causing this behavior. 3. Automatic Emergency Braking (AEB) System Activating Randomly The most alarming issue is that the automatic emergency braking system has activated on its own multiple times while driving on the turnpike with no obstruction present. This has nearly caused accidents on several occasions. Unexpected braking at highway speeds creates an extremely dangerous situation for both my family and surrounding drivers. These issues are not minor inconveniences — they are serious safety hazards. Sudden braking, unintended liftgate closure, and transmission failure all create significant risk of injury or collision. Given the number of similar complaints publicly reported by other owners, I am requesting that NHTSA formally investigate these defects and determine whether a recall should be issued for affected 2019 GMC Suburban vehicles. I am extremely concerned for the safety of my family and others on the road. Please confirm receipt of this complaint and advise if additional information is needed. Sincerely, [XXX] [XXX] [XXX] INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)

Read More...

NHTSA ID Number: 11720006

Complaint Date: 2026-02-23

Fail Date: 2026-02-23

Manufacturer Name: Nissan North America, Inc.

Vehicle Make: NISSAN

Vehicle Model: LEAF

Model Year: 2019


Summary

The contact owns a 2019 Nissan Leaf. The contact received notification of NHTSA Campaign Number: 24V700000 (Electrical System); however, the part to do the recall repair was not yet available. The local dealer was contacted and confirmed that the part for the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The contact had not experienced a failure.

Read More...

NHTSA ID Number: 11720005

Complaint Date: 2026-02-23

Fail Date: 2025-07-30

Manufacturer Name: Ford Motor Company

Vehicle Make: FORD

Vehicle Model: TAURUS

Model Year: 2018


Summary

The contact owns a 2018 Ford Taurus. The contact stated that while reversing, the rear-view camera display failed to function as intended. The contact stated that the image appeared and then disappeared. The message that the rear-view camera was unavailable was displayed. Occasionally, the rear-view camera displayed a distorted image, and the failure was intermittent. The dealer was made aware of the failure. The vehicle was not diagnosed or repaired by an independent mechanic or dealer. The contact was informed that parts were not available. The contact received notification of NHTSA Campaign Number: 25V695000 (Back Over Prevention); however, the part to do the recall repair was not yet available. The manufacturer was not made aware of the failure. The failure mileage was approximately 135,000.

Read More...

NHTSA ID Number: 11720004

Complaint Date: 2026-02-23

Fail Date: 2026-02-03

Manufacturer Name: Chrysler (FCA US, LLC)

Vehicle Make: DODGE

Vehicle Model: DURANGO

Model Year: 2021


Summary

Cooling systems failed caused the engine to blow without warning

Read More...

NHTSA ID Number: 11720003

Complaint Date: 2026-02-23

Fail Date: 2026-02-23

Manufacturer Name: Ford Motor Company

Vehicle Make: FORD

Vehicle Model: F-350

Model Year: 2021


Summary

The contact owns a 2021 Ford F-350. The contact stated that while driving approximately 65 MPH, the vehicle lost automotive power. The low power mode warning light was illuminated. The contact received notification of NHTSA Campaign Number: 24V957000 (Fuel System, Diesel); however, the part to do the recall repair was not yet available. The vehicle was taken to a dealer, where it was diagnosed, and determined that a software update was needed; however, the software update was not available. The vehicle was not repaired. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue and stated that there was no estimate for when the remedy would be available. The failure mileage was approximately 125,000.

Read More...

NHTSA ID Number: 11720002

Complaint Date: 2026-02-23

Fail Date: 2026-02-21

Manufacturer Name: Hyundai Motor America

Vehicle Make: HYUNDAI

Vehicle Model: IONIQ 5

Model Year: 2025


Summary

ICCU confirm dead by the dealer. IONIQ 5 2025 AWD. only had this car for 5 month, 4900 miles. vehicle stopped at the middle on the highway. luckey, no accident occur. no part avilable, no ETA for fix, no loaner from dealer.

Read More...

NHTSA ID Number: 11720001

Complaint Date: 2026-02-23

Fail Date: 2025-07-05

Manufacturer Name: Nissan North America, Inc.

Vehicle Make: NISSAN

Vehicle Model: VERSA

Model Year: 2020


Summary

I have a 2020 Nissan versa it only has 100,000 miles on it. That’s not really a lot since it had about 75000 miles on it. I noticed that the car started slightly jerking. I couldn’t figure out what was going wrong and neither could anybody else eventually at around 100,000 miles I took it into another mechanic and he found the problem. The transmission is slipping and it is completely ruined. The whole transaxle assembly needs to be replaced not only is this expensive but it’s also very dangerous sometimes when I try to move the car I put in gear I start to drive and it jerks so bad that it starts to stall when I contacted Nissan about this they refused to help with any Solution. The transmission costs anywhere from $8000-$12,000 for that price. I could buy a new 2020 Nissan versa.

Read More...

NHTSA ID Number: 11720000

Complaint Date: 2026-02-23

Fail Date: 2026-02-17

Manufacturer Name: Chrysler (FCA US, LLC)

Vehicle Make: JEEP

Vehicle Model: CHEROKEE

Model Year: 2020


Summary

The contact owns a 2020 Jeep Cherokee. The contact stated that while changing lines and attempting to depress the accelerator pedal, the vehicle failed to respond with a grinding sound coming from the front of the vehicle. The contact pulled over into a parking lot and attempted to shift to park, and the vehicle started to reverse unintendedly. The contact stated that after returning to the residence, the vehicle was parked and the parking brake was activated to keep the vehicle from moving unintendedly. The “Service 4WD” warning light was illuminated. An independent mechanic was contacted. The vehicle was taken to the independent mechanic, where it was diagnosed and determined that the PTU needed to be replaced. The vehicle was not repaired. The failure had occurred twice. The contact associated the failure with NHTSA Campaign Number:25V011000 (POWER TRAIN); however, the VIN was not included in the recall. The manufacturer was notified of the failure and referred the contact to another dealer to seek assistance with repairing the vehicle. The failure mileage was 68,000.

Read More...

NHTSA ID Number: 11719999

Complaint Date: 2026-02-23

Fail Date: 2026-02-20

Manufacturer Name: General Motors, LLC

Vehicle Make: GMC

Vehicle Model: SIERRA 1500

Model Year: 2022


Summary

The contact owns a 2022 GMC Sierra 1500. The contact received notification of NHTSA Campaign Number: 25V274000 (ENGINE AND ENGINE COOLING). The contact had parked the vehicle in a parking space when the engine seized. No warning lights illuminated. The vehicle failed to restart and was towed to the dealer, where it was diagnosed and determined that the fuel system control module had failed. The contact was informed that the part to do the recall repair was not yet available. The vehicle remained at the dealer unrepaired. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The failure mileage was approximately 90,000.

Read More...

NHTSA ID Number: 11719998

Complaint Date: 2026-02-23

Fail Date: 2026-02-19

Manufacturer Name: Honda (American Honda Motor Co.)

Vehicle Make: HONDA

Vehicle Model: PASSPORT

Model Year: 2021


Summary

After having constant issues with the idle stop and the car alarm going off in the middle of the night and day for no apparent reason I took it to the dealer to get it fixed. After supposedly fixing the idle stop, about two weeks later I was going up a ramp during a heavy traffic hour and the car completely shot down. It took me a few minutes to get it back on. I’ve had issues with this car from day one (brand new). I’m currently trying to get another car.

Read More...


Bestseller No. 1
ANCEL AD310 Classic Enhanced Universal OBD II Scanner Car Engine Fault Code Reader CAN Diagnostic Scan Tool, Read and Clear Error Codes for 1996 or Newer OBD2 Protocol Vehicle (Black)
  • CEL Doctor: The ANCEL AD310 is one of the best-selling OBD II scanners on the market and is recommended by Scotty Kilmer, a YouTuber and auto mechanic. It can easily determine the cause of the check engine light coming on. After repairing the vehicle's problems, it can quickly read and clear diagnostic trouble codes of emission system, read live data & hard memory data, view freeze frame, I/M monitor readiness and collect vehicle information.
  • Sturdy and Compact: Equipped with a 2.5 foot cable made of very thick, flexible insulation. It is important to have a sturdy scanner as it can easily fall to the ground when working in a car. The AD310 OBD2 scanner is a well-constructed mechanic tool with a sleek design. It weighs 12 ounces and measures 8.9 x 6.9 x 1.4 inches. Thanks to its compact design and light weight, transporting the device is not a problem. The buttons are clearly labelled and the screen is large and displays results clearly.
  • Accurate Fast and Easy to Use: The AD310 scanner can help you or your mechanic understand if your car is in good condition, provides exceptionally accurate and fast results, reads and clears engine trouble emission codes in seconds after you fixed the problem. This device will let you know immediately and fix the problem right away without any car knowledge. No need for batteries or a charger, get power directly from the OBDII Data Link Connector in your vehicle.
  • OBDII Protocols and Car Compatibility: Many cheap scan tools do not really support all OBD2 protocols. AD310 scanner as it can support all OBDII protocols such as KWP2000, J1850 VPW, ISO9141, J1850 PWM and CAN. This device also has extensive vehicle compatibility with 1996 US-based, 2000 EU-based and Asian cars, light trucks, SUVs, as well as newer OBD2 and CAN vehicles both domestic and foreign. Pls confirm with our customer service whether it is compatible with your vehicle before purchasing.
  • Home Necessity and Worthy to Own: This is an excellent code reader to travel or home with as it weighs less and it is compact in design. You can easily slide it in your backpack as you head to the garage, or put it on the dashboard, this will be a great fit for you. The AD310 is not only portable, but also accurate and fast in performance. Moreover, it covers various car brands and is suitable for people who just need a code reader to check their car.
Bestseller No. 2
MOTOPOWER MP69033 Car OBD2 Scanner Code Reader Engine Fault Scanner CAN Diagnostic Scan Tool for All OBD II Protocol Cars Since 1996, Yellow
  • Multi-Functions - Practical Multi-Functions OBD2 code reader features built-in OBD2 DTC lookup library, which help you to determine the cause of the engine light, read code, erase code, view freeze frame, I/M ready, vehicle information, data flow, real-time curve, get vehicle speed information, calculate load value, engine coolant temperature, get engine speed.
  • Wide Capability - Supports 9 protocols compatible with most 1996 US-Based, 2000 EU-Based and Asian cars, and newer OBD II & CAN domestic or import vehicles. Supports 6 languages - English,German, Dutch, Spanish, French, Italian.
  • 2.8" LCD Display - Designed with a clear display 2.8" Large LCD screen - white backlight and contrast adjustment. No need any battery or charger, OBD reader gets the power directly from your vehicle through the OBDII Data Link Connector.
  • Compact Design - Car diagnostic scanner is equipped with a 2.5 feet long cable and made of a very thick flexible insulator.There are 6 buttons on OBD2 Scanner:scroll up/down,enter/exit and buttons that quick query VIN vehicle number& the DTC fault code.
  • ABS / Airbag codes NOT Supported - It is able to read and clear check engine information which is part of OBDII system, but it cannot work with non-OBDII systems, including ABS / Airbag / Oil Service Light, etc.
Bestseller No. 3
FOXWELL NT301 OBD2 Scanner Live Data Professional Mechanic OBDII Diagnostic Code Reader Tool for Check Engine Light
  • 【Your Personal CEL Doctor – Read & Clear Engine Codes】The NT301 OBD2 scanner lets you read diagnostic trouble codes (DTCs), check em-issions readiness, turn off your Check Engine Light (CEL) or MIL, reset monitors, and view live data streams. It retrieves your vehicle's VIN instantly. Like all standard OBD2 scanners, it clears codes only after repairs are completed—if the issue persists, the code will return. Designed for DIYers who want to understand what’s really going on under the hood.
  • 【Easy Code Reading – Just Plug & Play】Simply plug into the OBD2 port, turn the ignition to “ON” (engine off), and select the correct menu: Select OBDII-> Wait for seconds-> Select Read codes. For accurate results, ensure your vehicle is compatible and the OBD2 port is free from damage or wiring issues. No batteries needed— powered directly by your car.
  • 【Live Data Graphing & Accuracy for Most OBD2 Vehicles】View and log live sensor data in graph form—monitor oxygen sensors, fuel trims, coolant temp, RPM, and more. Spot trends and suspicious values in real time. Compatible with most 1996+ gasoline cars, light trucks, and SUVs sold in the U.S., as well as many 2000+ European and Asian models. Also works on 12V diesel vehicles equipped with OBD2.
  • 【S-mog Check Helper – Know Your Readiness Status at a Glance】With dedicated I/M readiness hotkeys and a simple Red-Yellow-Green LED indicator, you’ll instantly know if your vehicle is ready for em-issions testing. Built-in speaker provides audio feedback. No guesswork—just confidence before you head to the test center.
  • 【A Must-Have Tool for Every Home Mechanic】Compact, rugged, and ready to use right out of the box. The 2.8” color screen is easy to read, even in daylight. No charging or setup required—just plug into the 16-pin DLC and start diagnosing. Recommended by professional mechanics on YouTube and trusted by DIYers worldwide.

Last update on 2026-03-24 / Affiliate links / Images from Amazon Product Advertising API


 

This product presentation was made with AAWP plugin.

Share to...