Recalls List


Loading...


NHTSA Campaign Number: 25V868

Manufacturer: Gillig, LLC

Components: STRUCTURE:EMERGENCY:ESCAPE/EGRESS/EXIT:LATCHING/RELEASE SYSTEM

Manufacturer Recall Number:

Potential Number of Units Affected: 6

Consumer Advisory: Do Not Drive: No

Consumer Advisory: Park Outside: No


Summary

Gillig, LLC (Gillig) is recalling certain 2013 Low Floor transit buses. The emergency exit window latch may fail, allowing the window to open during a crash. As such, these emergency exit windows fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 217, "Bus Emergency Exits and Window Retention and Release."

Read More...

NHTSA Campaign Number: 25V867

Manufacturer: Mack Trucks, Inc.

Components: SERVICE BRAKES, AIR:DISC:CHAMBER

Manufacturer Recall Number: SC0491

Potential Number of Units Affected: 679

Consumer Advisory: Do Not Drive: No

Consumer Advisory: Park Outside: No


Summary

Mack Trucks, Inc. (Mack) is recalling certain 2009-2015 Granite (GU) trucks. Vehicles remedied under Recall 15V804 (SC0398) may have had incorrect parts installed during subsequent repairs. The incorrect parts may cause a brake imbalance between the steer and drive axle brakes and the rear brakes to overheat.

Read More...

NHTSA Campaign Number: 25V866

Manufacturer: Ford Motor Company

Components: POWER TRAIN:AXLE ASSEMBLY:AXLE SHAFT

Manufacturer Recall Number: 25SD8

Potential Number of Units Affected: 6819

Consumer Advisory: Do Not Drive: No

Consumer Advisory: Park Outside: No


Summary

Ford Motor Company (Ford) is recalling certain 2026 Super Duty F-250 and F-350 vehicles. The right rear axle shaft may have been improperly heat-treated during manufacturing and may break.

Read More...

NHTSA Campaign Number: 25V865

Manufacturer: Mercedes-Benz USA, LLC

Components: ELECTRICAL SYSTEM:WIRING

Manufacturer Recall Number: 2026010001

Potential Number of Units Affected: 117

Consumer Advisory: Do Not Drive: No

Consumer Advisory: Park Outside: No


Summary

Mercedes-Benz USA, LLC (MBUSA) is recalling certain AMG E 53 4MATIC+ WAGON vehicles. The transmission wiring harness may be routed too close to the front driveshaft, which can result in wiring harness damage and cause a loss of drive power.

Read More...

NHTSA Campaign Number: 25V864

Manufacturer: Mercedes-Benz USA, LLC

Components: SEAT BELTS:REAR/OTHER

Manufacturer Recall Number: 2026010003

Potential Number of Units Affected: 82

Consumer Advisory: Do Not Drive: No

Consumer Advisory: Park Outside: No


Summary

Mercedes-Benz USA, LLC (MBUSA) is recalling certain 2025-2026 GLE 350 4MATIC vehicles. The center rear seat belts may have been installed without the child seat protection function and fail to lock a child restraint properly. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 208, "Occupant Crash Protection," and FMVSS number 209, "Seat Belt Assemblies."

Read More...

NHTSA Campaign Number: 25V863

Manufacturer: Ford Motor Company

Components: POWER TRAIN:AUTOMATIC TRANSMISSION:INTERNAL:PARK PAWL

Manufacturer Recall Number: 25C69

Potential Number of Units Affected: 272645

Consumer Advisory: Do Not Drive: No

Consumer Advisory: Park Outside: No


Summary

Ford Motor Company (Ford) is recalling certain 2022-2026 F-150 Lightning BEV, 2024-2026 Mustang Mach-E, and 2025-2026 Maverick vehicles. The integrated park module may fail to lock into the park position when the driver shifts into park. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 114, "Theft Protection and Rollaway Prevention."

Read More...

NHTSA Campaign Number: 25V862

Manufacturer: Ford Motor Company

Components: SEAT BELTS:REAR/OTHER:RETRACTOR

Manufacturer Recall Number: 25C68

Potential Number of Units Affected: 780

Consumer Advisory: Do Not Drive: No

Consumer Advisory: Park Outside: No


Summary

Ford Motor Company (Ford) is recalling certain 2025-2026 Corsair and Escape vehicles. The seat belt retractors for the left and right rear passenger seats may not be securely fastened.

Read More...

NHTSA Campaign Number: 25V861

Manufacturer: Diamond Coach Corporation

Components: EQUIPMENT ADAPTIVE/MOBILITY:WHEELCHAIR RESTRAINTS/SECUREMENT:LATCH/ANCHOR:

Manufacturer Recall Number:

Potential Number of Units Affected: 94

Consumer Advisory: Do Not Drive: No

Consumer Advisory: Park Outside: No


Summary

Diamond Coach Corporation (Diamond Coach) is recalling certain 2025 VIP buses equipped with QRT-Deluxe and QRT-Max wheelchair restraints. The retractors may not lock, preventing the wheelchair from being properly secured.

Read More...

NHTSA Campaign Number: 25V860

Manufacturer: Ford Motor Company

Components: POWER TRAIN:AXLE ASSEMBLY:AXLE SHAFT

Manufacturer Recall Number: 25SD9

Potential Number of Units Affected: 32160

Consumer Advisory: Do Not Drive: No

Consumer Advisory: Park Outside: No


Summary

Ford Motor Company (Ford) is recalling certain 2022-2025 E-Transit vehicles. The left rear axle half shaft may partially disengage from the power drive unit, which can result in a loss of drive power.

Read More...

NHTSA Campaign Number: 25V859

Manufacturer: Honda (American Honda Motor Co.)

Components: SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:MASTER CYLINDER

Manufacturer Recall Number: RN5

Potential Number of Units Affected: 70658

Consumer Advisory: Do Not Drive: No

Consumer Advisory: Park Outside: No


Summary

Honda (American Honda Motor Co.) is recalling certain 2016-2020 Acura ILX vehicles. Contaminated brake fluid may cause a seal inside the brake master cylinder to deform, which can cause an internal brake fluid leak and reduce brake function.

Read More...


Bestseller No. 1
ANCEL AD310 Classic Enhanced Universal OBD II Scanner Car Engine Fault Code Reader CAN Diagnostic Scan Tool, Read and Clear Error Codes for 1996 or Newer OBD2 Protocol Vehicle (Black)
  • CEL Doctor: The ANCEL AD310 is one of the best-selling OBD II scanners on the market and is recommended by Scotty Kilmer, a YouTuber and auto mechanic. It can easily determine the cause of the check engine light coming on. After repairing the vehicle's problems, it can quickly read and clear diagnostic trouble codes of emission system, read live data & hard memory data, view freeze frame, I/M monitor readiness and collect vehicle information.
  • Sturdy and Compact: Equipped with a 2.5 foot cable made of very thick, flexible insulation. It is important to have a sturdy scanner as it can easily fall to the ground when working in a car. The AD310 OBD2 scanner is a well-constructed mechanic tool with a sleek design. It weighs 12 ounces and measures 8.9 x 6.9 x 1.4 inches. Thanks to its compact design and light weight, transporting the device is not a problem. The buttons are clearly labelled and the screen is large and displays results clearly.
  • Accurate Fast and Easy to Use: The AD310 scanner can help you or your mechanic understand if your car is in good condition, provides exceptionally accurate and fast results, reads and clears engine trouble emission codes in seconds after you fixed the problem. This device will let you know immediately and fix the problem right away without any car knowledge. No need for batteries or a charger, get power directly from the OBDII Data Link Connector in your vehicle.
  • OBDII Protocols and Car Compatibility: Many cheap scan tools do not really support all OBD2 protocols. AD310 scanner as it can support all OBDII protocols such as KWP2000, J1850 VPW, ISO9141, J1850 PWM and CAN. This device also has extensive vehicle compatibility with 1996 US-based, 2000 EU-based and Asian cars, light trucks, SUVs, as well as newer OBD2 and CAN vehicles both domestic and foreign. Pls confirm with our customer service whether it is compatible with your vehicle before purchasing.
  • Home Necessity and Worthy to Own: This is an excellent code reader to travel or home with as it weighs less and it is compact in design. You can easily slide it in your backpack as you head to the garage, or put it on the dashboard, this will be a great fit for you. The AD310 is not only portable, but also accurate and fast in performance. Moreover, it covers various car brands and is suitable for people who just need a code reader to check their car.
Bestseller No. 2
MOTOPOWER MP69033 Car OBD2 Scanner Code Reader Engine Fault Scanner CAN Diagnostic Scan Tool for All OBD II Protocol Cars Since 1996, Yellow
  • Multi-Functions - Practical Multi-Functions OBD2 code reader features built-in OBD2 DTC lookup library, which help you to determine the cause of the engine light, read code, erase code, view freeze frame, I/M ready, vehicle information, data flow, real-time curve, get vehicle speed information, calculate load value, engine coolant temperature, get engine speed.
  • Wide Capability - Supports 9 protocols compatible with most 1996 US-Based, 2000 EU-Based and Asian cars, and newer OBD II & CAN domestic or import vehicles. Supports 6 languages - English,German, Dutch, Spanish, French, Italian.
  • 2.8" LCD Display - Designed with a clear display 2.8" Large LCD screen - white backlight and contrast adjustment. No need any battery or charger, OBD reader gets the power directly from your vehicle through the OBDII Data Link Connector.
  • Compact Design - Car diagnostic scanner is equipped with a 2.5 feet long cable and made of a very thick flexible insulator.There are 6 buttons on OBD2 Scanner:scroll up/down,enter/exit and buttons that quick query VIN vehicle number& the DTC fault code.
  • ABS / Airbag codes NOT Supported - It is able to read and clear check engine information which is part of OBDII system, but it cannot work with non-OBDII systems, including ABS / Airbag / Oil Service Light, etc.
Bestseller No. 3
FOXWELL NT301 OBD2 Scanner Live Data Professional Mechanic OBDII Diagnostic Code Reader Tool for Check Engine Light
  • 【Your Personal CEL Doctor – Read & Clear Engine Codes】The NT301 OBD2 scanner lets you read diagnostic trouble codes (DTCs), check em-issions readiness, turn off your Check Engine Light (CEL) or MIL, reset monitors, and view live data streams. It retrieves your vehicle's VIN instantly. Like all standard OBD2 scanners, it clears codes only after repairs are completed—if the issue persists, the code will return. Designed for DIYers who want to understand what’s really going on under the hood.
  • 【Easy Code Reading – Just Plug & Play】Simply plug into the OBD2 port, turn the ignition to “ON” (engine off), and select the correct menu: Select OBDII-> Wait for seconds-> Select Read codes. For accurate results, ensure your vehicle is compatible and the OBD2 port is free from damage or wiring issues. No batteries needed— powered directly by your car.
  • 【Live Data Graphing & Accuracy for Most OBD2 Vehicles】View and log live sensor data in graph form—monitor oxygen sensors, fuel trims, coolant temp, RPM, and more. Spot trends and suspicious values in real time. Compatible with most 1996+ gasoline cars, light trucks, and SUVs sold in the U.S., as well as many 2000+ European and Asian models. Also works on 12V diesel vehicles equipped with OBD2.
  • 【S-mog Check Helper – Know Your Readiness Status at a Glance】With dedicated I/M readiness hotkeys and a simple Red-Yellow-Green LED indicator, you’ll instantly know if your vehicle is ready for em-issions testing. Built-in speaker provides audio feedback. No guesswork—just confidence before you head to the test center.
  • 【A Must-Have Tool for Every Home Mechanic】Compact, rugged, and ready to use right out of the box. The 2.8” color screen is easy to read, even in daylight. No charging or setup required—just plug into the 16-pin DLC and start diagnosing. Recommended by professional mechanics on YouTube and trusted by DIYers worldwide.

Last update on 2026-03-20 / Affiliate links / Images from Amazon Product Advertising API


 

This product presentation was made with AAWP plugin.

Leave a Comment

Share to...