NHTSA ID Number: 11719377
Complaint Date: 2026-02-20
Fail Date: 2026-02-19
Manufacturer Name: Chrysler (FCA US, LLC)
Vehicle Make: JEEP
Vehicle Model: CHEROKEE
Model Year: 2022
Summary
When activating the left turn signal both the left and right turn signal indicators began blinking. I had to cycle the turn signal switch both right and left and then to off to stop both indicators from blinking.
Read More...NHTSA ID Number: 11719376
Complaint Date: 2026-02-20
Fail Date: 2026-01-09
Manufacturer Name: Tesla, Inc.
Vehicle Make: TESLA
Vehicle Model: MODEL Y
Model Year: 2022
Summary
The contact owns a 2022 Tesla Model Y. The contact stated that while charging the vehicle or using the onboard navigation system to search for a charging station, the entire infotainment central processing unit shut down unintendedly. The contact stated that there was an abnormally low humming sound, and approximately 30-seconds later the infotainment screen shut down unintendedly. The contact had taken the vehicle to a local dealer where the battery and the coolant system were checked. The contact was advised by the dealer that they were not able to isolate the failure and needed to run additional diagnostic testing. The vehicle was not repaired. The contact researched online and related the failure to NHTSA Campaign Number: 22V296000 (Back Over Prevention, Equipment); however, when the dealer was contacted about the recall, the contact was advised there was no recall associated with the VIN. The manufacturer was not informed of the failure. The failure mileage was approximately 70,000.
Read More...NHTSA ID Number: 11719375
Complaint Date: 2026-02-20
Fail Date: 2026-02-20
Manufacturer Name: Ford Motor Company
Vehicle Make: FORD
Vehicle Model: ECOSPORT
Model Year: 2019
Summary
The contact owns a 2019 Ford EcoSport. The contact stated that while starting the vehicle, the low oil warning light illuminated. The vehicle was taken to the dealer, where it was diagnosed and determined that the oil pump had failed, which caused the engine failure. The contact was informed that the engine needed to be repaired. The vehicle was not repaired. The dealer informed the contact that the failure was related to a previous repair completed under NHTSA Campaign Number: 23V905000 (Engine and Engine Cooling); where the oil pump tensioner assembly had not been replaced, and only the oil drive pump belt had been replaced. The dealer contacted the manufacturer to request an engine replacement due to the recall-related failure. The manufacturer was made aware of the failure, and a case was opened. The approximate failure mileage was 38,000.
Read More...NHTSA ID Number: 11719374
Complaint Date: 2026-02-20
Fail Date: 2026-02-14
Manufacturer Name: Hyundai Motor America
Vehicle Make: HYUNDAI
Vehicle Model: IONIQ 5
Model Year: 2022
Summary
Q: What component or system failed or malfunctioned, and is it available for inspection upon request? A: ICCU failed - Not available for inspection (at least at this time, but willing to try and make it work). Q: How was your safety or the safety of others put at risk? A: The ICCU (Integrated Charging Control Unit) is a safety-critical component subject to federal recalls 24V-204 and 24V-868. (My vehicle had all recalls performed prior to this failure.) The failure occurred while driving which was indicated by a “popping” sound. It is contextually important to note that the ICCU is responsible for charging the 12v battery, had the 12v battery failed during the duration of my drive I would have experienced a sudden loss of motive power. A sudden loss of motive power is an unacceptable risk to public safety. Q: Has the problem been reproduced or confirmed by a dealer or independent service center? A: Yes, the problem has been reproduced and confirmed to be an ICCU failure by an official Hyundai service center. Q: Has the vehicle or component been inspected by the manufacturer, police, insurance representatives or others? A: No. Q: Were there any warning lamps, messages or other symptoms of the problem prior to the failure, and when did they first appear? A: Symptoms first appeared February 14, 2026. The first symptom of failure was the signature “pop” sound that the ICCU failure is known for. Only after my drive and upon attempting L1/L2 charging did my dash warning indicate “Check Electric Vehicle System.” I also checked for codes with my OBDII scanner, and it showed no codes.
Read More...NHTSA ID Number: 11719373
Complaint Date: 2026-02-20
Fail Date: 2026-01-20
Manufacturer Name: Chrysler (FCA US, LLC)
Vehicle Make: CHRYSLER
Vehicle Model: PT CRUISER
Model Year: 2005
Summary
The contact owns a 2005 Chrysler PT Cruiser. The contact stated that while the vehicle was at the dealer for a service appointment, the contact was informed that the power steering fluid hose was leaking. The contact stated that at that time, it was a small leak; however, the power steering fluid hose then developed a severe leak. The vehicle was taken to the dealer; however, the vehicle was not inspected. The contact was informed that a diagnostic test needed to be performed. The contact declined to pay for a diagnostic test. The vehicle was not diagnosed or repaired by an independent mechanic or dealer. The manufacturer was made aware of the failure but provided no assistance. The contact referenced an unknown recall with a similar failure however, the VIN was not under recall. The failure mileage was approximately 71,000.
Read More...NHTSA ID Number: 11719372
Complaint Date: 2026-02-20
Fail Date: 2026-01-12
Manufacturer Name: Toyota Motor Corporation
Vehicle Make: TOYOTA
Vehicle Model: RAV4 PRIME
Model Year: 2024
Summary
Affidavit (present first party experience) and Exhibits (proof of claim) In support of claim (complaint) For damages (harm, injury, tort) 1. My legal name is [XXX] . 2. I purchased a 2024 prius prime in tupelo, Mississippi on 09/02/2025. 3. I traded in a prius i had purchased in idaho falls, id in february 2024 for the new 2024 prius prime. 4. My prius trade in was financed with TOYOTA financial (TOYOTA motor corporation). 5. I purchased a new 2024 TOYOTA pruis prime from TOYOTA carlock in tupelo, ms with odometer statement of "10 miles". 6. The vehicle was on the showroom floor. 7. The vehicle had a dead battery, and the salesman said i could test drive another like kind vehicle instead. 8. The salesman claimed it was a "new" car. 9. My former residence prior to december 5, 2025 was [XXX] . 10. I notified TOYOTA financial (lender) about the car odometer fraud. 11.I notified carlock TOYOTA about the odometer fraud. 12. Neither TOYOTA financial nor the dealership offered any help after being notified of fraudulent contracts. 13. I reported them to the Mississippi bbb. don 14.I took my prius to the dealership for its scheduled maintenance several times in tupelo Mississippi. 15.I drove the vehicle for UBER for several months before travelling to Colorado for the holidays between november and december 2025. 16. I now reside at [XXX] since january 1, 2026. 17. The new 2024 prius prime broke down on rt. 83 in Colorado Springs in the middle of a winter storm. 18. I was trapped in the car for over 2 hours in freezing temperatures while waiting for my "prepaid roadside services". 19.I was able to receive a "loaner" from TOYOTA Colorado Springs just before they closed for the night. The loaner had a cracked windshield and came with a contract charging "$80 per day rental" 20. The dealership refused to deliver warranty services covered under the warranty and attempted to charge me . INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
Read More...NHTSA ID Number: 11719371
Complaint Date: 2026-02-20
Fail Date: 2026-02-14
Manufacturer Name: Ford Motor Company
Vehicle Make: FORD
Vehicle Model: F-150
Model Year: 2020
Summary
2020 F150 with only 63000 miles has a failed transmission. The truck doesn't shift gears properly, gets stuck in gears, loses power suddenly. This is a huge safety risk as the vehicle just stops accelerating or working when driving. This clearly endangers me and other drivers. Ford refuses to pay even though their check engine light gave a TRANSMISSION/POWER FAILURE alert and the Ford dealership inspected it and their diagnosis is: REPLACE COMPLETE TRANSMISSION ASSEMBLY. HAS INTERNAL CDF DRUM BUSHING FAILURE. This is an ongoing issue with these 10 speed transmissions on these F150s. There are several class action lawsuits against Ford over these 10R80 transmissions. Ford is not only refusing to recall these dangerous vehicles but also refusing to pay to cover the repairs on transmissions they've known are defect.
Read More...NHTSA ID Number: 11719370
Complaint Date: 2026-02-20
Fail Date: 2026-02-15
Manufacturer Name: Chrysler (FCA US, LLC)
Vehicle Make: JEEP
Vehicle Model: CHEROKEE
Model Year: 2016
Summary
WHILE STOPPED AT STOP SIGNS OR STOP LIGHTS THE EMERGENCY PARKING BREAK WILL ENGAGE AND UNABLE TO TURN OFF WITH OUT RESTARTING VEHICLE.
Read More...NHTSA ID Number: 11719369
Complaint Date: 2026-02-20
Fail Date: 2025-05-26
Manufacturer Name: Toyota Motor Corporation
Vehicle Make: TOYOTA
Vehicle Model: CAMRY
Model Year: 2025
Summary
The contact owns a 2025 Toyota Camry. The contact stated that while driving at an undisclosed speed, a small crack developed on the front windshield. The crack continued to expand to 18 inches across the windshield. During the failure, no objects had struck the windshield to cause the crack. The contact indicated that, over time, other cracks developed on the front windshield. The cause of the failure was not yet determined. The manufacturer and local dealer were notified of the cracks, but no assistance was offered. The failure mileage was 100.
Read More...NHTSA ID Number: 11719368
Complaint Date: 2026-02-20
Fail Date: 2026-02-17
Manufacturer Name: Hyundai Motor America
Vehicle Make: GENESIS
Vehicle Model: G70
Model Year: 2020
Summary
On 2/17/2026 I was driving from my home to a fast food restaurant one mile away from my home. After picking up the food I dropped the food off about 3 miles down the road to my family member at their work and drove the 3.3 miles back from my family members work to my home. I arrived at my home and was walking into the house around 12:30 pm my car was off and locked. During my drive the car performed completely fine, there was no codes, no noises, no smells, the car drove how i would describe as intended. But at around 12:45 my neighbors were banging and ringing my doorbell to tell me that my car was on fire. I proceeded to escort my aunt and my grandmother out of the home as i watched my car continue to smoke and watched the flames continue to rise. Once removed from the home i called 911 who took my information down and informed me that a similar call was received a new minutes before and that fire, police and EMS were on the way. I watched as the car completely engulfed in flames and the fire department worked to put the fire out. The car is completely lost and resulted in damages to my garage and my other car parked next to it. I know previous genesis models have had recalls for issues in the engine bay that could result in fires. I do not see a recall for my vehicle but given the unexplainable cause of the fire at this time, believe it may be beneficial to submit a report.
Read More...
- CEL Doctor: The ANCEL AD310 is one of the best-selling OBD II scanners on the market and is recommended by Scotty Kilmer, a YouTuber and auto mechanic. It can easily determine the cause of the check engine light coming on. After repairing the vehicle's problems, it can quickly read and clear diagnostic trouble codes of emission system, read live data & hard memory data, view freeze frame, I/M monitor readiness and collect vehicle information.
- Sturdy and Compact: Equipped with a 2.5 foot cable made of very thick, flexible insulation. It is important to have a sturdy scanner as it can easily fall to the ground when working in a car. The AD310 OBD2 scanner is a well-constructed mechanic tool with a sleek design. It weighs 12 ounces and measures 8.9 x 6.9 x 1.4 inches. Thanks to its compact design and light weight, transporting the device is not a problem. The buttons are clearly labelled and the screen is large and displays results clearly.
- Accurate Fast and Easy to Use: The AD310 scanner can help you or your mechanic understand if your car is in good condition, provides exceptionally accurate and fast results, reads and clears engine trouble emission codes in seconds after you fixed the problem. This device will let you know immediately and fix the problem right away without any car knowledge. No need for batteries or a charger, get power directly from the OBDII Data Link Connector in your vehicle.
- OBDII Protocols and Car Compatibility: Many cheap scan tools do not really support all OBD2 protocols. AD310 scanner as it can support all OBDII protocols such as KWP2000, J1850 VPW, ISO9141, J1850 PWM and CAN. This device also has extensive vehicle compatibility with 1996 US-based, 2000 EU-based and Asian cars, light trucks, SUVs, as well as newer OBD2 and CAN vehicles both domestic and foreign. Pls confirm with our customer service whether it is compatible with your vehicle before purchasing.
- Home Necessity and Worthy to Own: This is an excellent code reader to travel or home with as it weighs less and it is compact in design. You can easily slide it in your backpack as you head to the garage, or put it on the dashboard, this will be a great fit for you. The AD310 is not only portable, but also accurate and fast in performance. Moreover, it covers various car brands and is suitable for people who just need a code reader to check their car.
- Multi-Functions - Practical Multi-Functions OBD2 code reader features built-in OBD2 DTC lookup library, which help you to determine the cause of the engine light, read code, erase code, view freeze frame, I/M ready, vehicle information, data flow, real-time curve, get vehicle speed information, calculate load value, engine coolant temperature, get engine speed.
- Wide Capability - Supports 9 protocols compatible with most 1996 US-Based, 2000 EU-Based and Asian cars, and newer OBD II & CAN domestic or import vehicles. Supports 6 languages - English,German, Dutch, Spanish, French, Italian.
- 2.8" LCD Display - Designed with a clear display 2.8" Large LCD screen - white backlight and contrast adjustment. No need any battery or charger, OBD reader gets the power directly from your vehicle through the OBDII Data Link Connector.
- Compact Design - Car diagnostic scanner is equipped with a 2.5 feet long cable and made of a very thick flexible insulator.There are 6 buttons on OBD2 Scanner:scroll up/down,enter/exit and buttons that quick query VIN vehicle number& the DTC fault code.
- ABS / Airbag codes NOT Supported - It is able to read and clear check engine information which is part of OBDII system, but it cannot work with non-OBDII systems, including ABS / Airbag / Oil Service Light, etc.
- 【Your Personal CEL Doctor – Read & Clear Engine Codes】The NT301 OBD2 scanner lets you read diagnostic trouble codes (DTCs), check em-issions readiness, turn off your Check Engine Light (CEL) or MIL, reset monitors, and view live data streams. It retrieves your vehicle's VIN instantly. Like all standard OBD2 scanners, it clears codes only after repairs are completed—if the issue persists, the code will return. Designed for DIYers who want to understand what’s really going on under the hood.
- 【Easy Code Reading – Just Plug & Play】Simply plug into the OBD2 port, turn the ignition to “ON” (engine off), and select the correct menu: Select OBDII-> Wait for seconds-> Select Read codes. For accurate results, ensure your vehicle is compatible and the OBD2 port is free from damage or wiring issues. No batteries needed— powered directly by your car.
- 【Live Data Graphing & Accuracy for Most OBD2 Vehicles】View and log live sensor data in graph form—monitor oxygen sensors, fuel trims, coolant temp, RPM, and more. Spot trends and suspicious values in real time. Compatible with most 1996+ gasoline cars, light trucks, and SUVs sold in the U.S., as well as many 2000+ European and Asian models. Also works on 12V diesel vehicles equipped with OBD2.
- 【S-mog Check Helper – Know Your Readiness Status at a Glance】With dedicated I/M readiness hotkeys and a simple Red-Yellow-Green LED indicator, you’ll instantly know if your vehicle is ready for em-issions testing. Built-in speaker provides audio feedback. No guesswork—just confidence before you head to the test center.
- 【A Must-Have Tool for Every Home Mechanic】Compact, rugged, and ready to use right out of the box. The 2.8” color screen is easy to read, even in daylight. No charging or setup required—just plug into the 16-pin DLC and start diagnosing. Recommended by professional mechanics on YouTube and trusted by DIYers worldwide.
Last update on 2026-03-26 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.