NHTSA ID Number: 11719397
Complaint Date: 2026-02-20
Fail Date: 2025-09-11
Manufacturer Name: General Motors, LLC
Vehicle Make: CHEVROLET
Vehicle Model: EQUINOX
Model Year: 2019
Summary
Air filter box housing top came off. Loss of power. Found that screws are used instead of a latch system. They had been wrenched down after last oil change and cracked the screw housing which is plastic. Filter housing came loose allowed more air and dirt to come into the housing box. Loss of fuel economy.
Read More...NHTSA ID Number: 11719396
Complaint Date: 2026-02-20
Fail Date: 2026-01-11
Manufacturer Name: Ford Motor Company
Vehicle Make: FORD
Vehicle Model: F-150
Model Year: 2017
Summary
While driving my truck erratically shifts. I’ve gotten multiple indications stating that Elite frame sensor is bad. I have been traveling 70+ miles an hour down the interstate and my rear wheels lock up the transmission drops in the second gear. This is a major safety hazard as it could cause major accidents. While looking through other complaints, this is a major ongoing condition with the 6R 80 transmissions in 2017 Ford F1 50s that has been reported on numerous occasions.
Read More...NHTSA ID Number: 11719395
Complaint Date: 2026-02-20
Fail Date: 2022-01-15
Manufacturer Name: Ford Motor Company
Vehicle Make: FORD
Vehicle Model: F-150
Model Year: 2016
Summary
Had issue with sudden downshifting ,not changing gears ,hard shift as well. Took the vehicle to AAMCO and was told the transmission needed to be rebuilt. So i did just, at 99,000 miles. Not sure if this helps your findings.
Read More...NHTSA ID Number: 11719394
Complaint Date: 2026-02-20
Fail Date: 2026-02-19
Manufacturer Name: Chrysler (FCA US, LLC)
Vehicle Make: JEEP
Vehicle Model: WRANGLER
Model Year: 2020
Summary
The contact owns a 2020 Jeep Wrangler. The contact stated that while driving at an undisclosed speed, the instrument panel displayed a blank screen. The vehicle was not diagnosed or repaired by an independent mechanic or dealer. The dealer was made aware of the failure. The contact was informed that the repair was not covered under warranty or recall. The contact referenced an unknown recall with a similar failure; however, the VIN was not under recall. The contact stated that the vehicle was unsafe to drive with the instrument cluster being inoperable. The manufacturer was not made aware of the failure. The failure mileage was unknown.
Read More...NHTSA ID Number: 11719393
Complaint Date: 2026-02-20
Fail Date: 2026-01-16
Manufacturer Name: Honda (American Honda Motor Co.)
Vehicle Make: HONDA
Vehicle Model: CIVIC
Model Year: 2018
Summary
•I am an Indiana resident. •I purchased a vehicle from a private seller in Ohio (seller operates through an LLC) on 1/16/2026 •Fraudulent title activity was discovered by mechanic on 1/26/26 (taken to mechanic due to sudden and unexpected issues) •The purchase agreement and price ($9,000) were confirmed via text message; there was no written bill of sale and no “as-is” agreement. •Prior to purchase, the seller provided a VIN that belonged to a different vehicle than the one sold. •After purchase, I discovered the vehicle has evidence of odometer rollback; the Ohio title indicates “odometer inaccurate,” which was not disclosed prior to sale. •The vehicle was previously salvage titled and originated from Canada, neither of which were disclosed. •The Ohio title lists an incorrect purchase price of $4,000, despite the agreed purchase price of $9,000. •Title was sold under dealer name permit number XXX •The vehicle was shown and represented as being in “great condition”; however, shortly after purchase, a licensed mechanic determined the vehicle requires a replacement engine, battery, and additional major mechanical repairs, rendering it unsafe and not drivable. Files attached support all of the above. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
Read More...NHTSA ID Number: 11719392
Complaint Date: 2026-02-20
Fail Date: 2026-02-20
Manufacturer Name: Ford Motor Company
Vehicle Make: FORD
Vehicle Model: EDGE
Model Year: 2015
Summary
The contact owns a 2015 Ford Edge. The contact stated that while attempting to reverse, the rearview camera became inoperable, and the image appeared blurry. The contact received notifications of NHTSA Campaign Numbers: 25V572000 (Back Over Prevention) and 25V544000 (Service Brakes, Hydraulic); however, the parts to do the recall repairs were not yet available. The dealer was contacted. The vehicle was not diagnosed or repaired. The dealer confirmed that parts were not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repairs. The manufacturer was not made aware of the failure. The approximate failure mileage was 200,000.
Read More...NHTSA ID Number: 11719391
Complaint Date: 2026-02-20
Fail Date: 2025-08-20
Manufacturer Name: General Motors, LLC
Vehicle Make: GMC
Vehicle Model: SIERRA 1500
Model Year: 2018
Summary
The contact owns a 2018 GMC Sierra 1500. The contact stated that while driving at an undisclosed speed, the vehicle jerked abnormally hard. No warning lights were illuminated. The vehicle was taken to the dealer, where it was diagnosed with transmission failure. The contact was informed that the transmission needed to be replaced. The vehicle was repaired; however, the failure reoccurred. The vehicle was taken to the dealer, where it was diagnosed and determined that the transmission was failing. The contact was informed that the transmission needed to be replaced. The vehicle was not repaired. The contact was informed that the repair was not covered under warranty. The transmission was replaced two years ago. In addition, the contact stated that the original transmission had failed at 130,000 miles. The manufacturer was not made aware of the failure. The failure mileage of the second transmission was approximately 40,000.
Read More...NHTSA ID Number: 11719390
Complaint Date: 2026-02-20
Fail Date: 2025-08-11
Manufacturer Name: Ford Motor Company
Vehicle Make: FORD
Vehicle Model: F-150
Model Year: 2023
Summary
The contact owns a 2023 Ford F-150. The contact received notification of NHTSA Campaign Number: 25V512000 (Power Train); however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The dealer was made aware of the issue and confirmed that parts were not yet available. The manufacturer was made aware of the issue and confirmed that parts were not yet available. The contact had not experienced a failure.
Read More...NHTSA ID Number: 11719389
Complaint Date: 2026-02-20
Fail Date: 2026-02-18
Manufacturer Name: General Motors, LLC
Vehicle Make: BUICK
Vehicle Model: ENVISION
Model Year: 2021
Summary
The contact owns a 2021 Buick Envision. The contact stated that while his wife was driving at an undisclosed speed on the freeway, the vehicle unintendedly accelerated around a corner, with the floor mat stuck under the pedal. The driver depressed the brake pedal for an extended time, but the vehicle continued accelerating. The driver pressed the park button, which slowed the vehicle, and the driver was able to pull over safely. There were no warning lights illuminated. The vehicle was taken to the local dealer, and the owner was informed about a possible recall. The dealer determined the failure was due to a stuck floor mat and sudden unintended acceleration. The front and rear brakes were replaced along with the floor mat. The floor mat was PN: 84734211. The manufacturer was not contacted. The failure mileage was approximately 37,000. The VIN was not available.
Read More...NHTSA ID Number: 11719388
Complaint Date: 2026-02-20
Fail Date: 2025-10-10
Manufacturer Name: Nissan North America, Inc.
Vehicle Make: NISSAN
Vehicle Model: ROGUE
Model Year: 2023
Summary
Rear window shattered.. I was sitting in parking lot and heard a loud noise like a gun shot.. when I looked around I saw a hole in my back window and cracking noise. No cars were around me
Read More...
- CEL Doctor: The ANCEL AD310 is one of the best-selling OBD II scanners on the market and is recommended by Scotty Kilmer, a YouTuber and auto mechanic. It can easily determine the cause of the check engine light coming on. After repairing the vehicle's problems, it can quickly read and clear diagnostic trouble codes of emission system, read live data & hard memory data, view freeze frame, I/M monitor readiness and collect vehicle information.
- Sturdy and Compact: Equipped with a 2.5 foot cable made of very thick, flexible insulation. It is important to have a sturdy scanner as it can easily fall to the ground when working in a car. The AD310 OBD2 scanner is a well-constructed mechanic tool with a sleek design. It weighs 12 ounces and measures 8.9 x 6.9 x 1.4 inches. Thanks to its compact design and light weight, transporting the device is not a problem. The buttons are clearly labelled and the screen is large and displays results clearly.
- Accurate Fast and Easy to Use: The AD310 scanner can help you or your mechanic understand if your car is in good condition, provides exceptionally accurate and fast results, reads and clears engine trouble emission codes in seconds after you fixed the problem. This device will let you know immediately and fix the problem right away without any car knowledge. No need for batteries or a charger, get power directly from the OBDII Data Link Connector in your vehicle.
- OBDII Protocols and Car Compatibility: Many cheap scan tools do not really support all OBD2 protocols. AD310 scanner as it can support all OBDII protocols such as KWP2000, J1850 VPW, ISO9141, J1850 PWM and CAN. This device also has extensive vehicle compatibility with 1996 US-based, 2000 EU-based and Asian cars, light trucks, SUVs, as well as newer OBD2 and CAN vehicles both domestic and foreign. Pls confirm with our customer service whether it is compatible with your vehicle before purchasing.
- Home Necessity and Worthy to Own: This is an excellent code reader to travel or home with as it weighs less and it is compact in design. You can easily slide it in your backpack as you head to the garage, or put it on the dashboard, this will be a great fit for you. The AD310 is not only portable, but also accurate and fast in performance. Moreover, it covers various car brands and is suitable for people who just need a code reader to check their car.
- Multi-Functions - Practical Multi-Functions OBD2 code reader features built-in OBD2 DTC lookup library, which help you to determine the cause of the engine light, read code, erase code, view freeze frame, I/M ready, vehicle information, data flow, real-time curve, get vehicle speed information, calculate load value, engine coolant temperature, get engine speed.
- Wide Capability - Supports 9 protocols compatible with most 1996 US-Based, 2000 EU-Based and Asian cars, and newer OBD II & CAN domestic or import vehicles. Supports 6 languages - English,German, Dutch, Spanish, French, Italian.
- 2.8" LCD Display - Designed with a clear display 2.8" Large LCD screen - white backlight and contrast adjustment. No need any battery or charger, OBD reader gets the power directly from your vehicle through the OBDII Data Link Connector.
- Compact Design - Car diagnostic scanner is equipped with a 2.5 feet long cable and made of a very thick flexible insulator.There are 6 buttons on OBD2 Scanner:scroll up/down,enter/exit and buttons that quick query VIN vehicle number& the DTC fault code.
- ABS / Airbag codes NOT Supported - It is able to read and clear check engine information which is part of OBDII system, but it cannot work with non-OBDII systems, including ABS / Airbag / Oil Service Light, etc.
- 【Your Personal CEL Doctor – Read & Clear Engine Codes】The NT301 OBD2 scanner lets you read diagnostic trouble codes (DTCs), check em-issions readiness, turn off your Check Engine Light (CEL) or MIL, reset monitors, and view live data streams. It retrieves your vehicle's VIN instantly. Like all standard OBD2 scanners, it clears codes only after repairs are completed—if the issue persists, the code will return. Designed for DIYers who want to understand what’s really going on under the hood.
- 【Easy Code Reading – Just Plug & Play】Simply plug into the OBD2 port, turn the ignition to “ON” (engine off), and select the correct menu: Select OBDII-> Wait for seconds-> Select Read codes. For accurate results, ensure your vehicle is compatible and the OBD2 port is free from damage or wiring issues. No batteries needed— powered directly by your car.
- 【Live Data Graphing & Accuracy for Most OBD2 Vehicles】View and log live sensor data in graph form—monitor oxygen sensors, fuel trims, coolant temp, RPM, and more. Spot trends and suspicious values in real time. Compatible with most 1996+ gasoline cars, light trucks, and SUVs sold in the U.S., as well as many 2000+ European and Asian models. Also works on 12V diesel vehicles equipped with OBD2.
- 【S-mog Check Helper – Know Your Readiness Status at a Glance】With dedicated I/M readiness hotkeys and a simple Red-Yellow-Green LED indicator, you’ll instantly know if your vehicle is ready for em-issions testing. Built-in speaker provides audio feedback. No guesswork—just confidence before you head to the test center.
- 【A Must-Have Tool for Every Home Mechanic】Compact, rugged, and ready to use right out of the box. The 2.8” color screen is easy to read, even in daylight. No charging or setup required—just plug into the 16-pin DLC and start diagnosing. Recommended by professional mechanics on YouTube and trusted by DIYers worldwide.
Last update on 2026-03-26 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.