NHTSA ID Number: 11720697
Complaint Date: 2026-02-26
Fail Date: 2025-04-08
Manufacturer Name: Ford Motor Company
Vehicle Make: LINCOLN
Vehicle Model: CORSAIR
Model Year: 2020
Summary
The contact owns a 2020 Lincoln Corsair. The contact received notification of NHTSA Campaign Number: 25V510000 (Back Over Prevention); however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The dealer was not contacted. The manufacturer was not made aware of the issue. The contact had not experienced a failure.
Read More...NHTSA ID Number: 11720696
Complaint Date: 2026-02-26
Fail Date: 2025-12-16
Manufacturer Name: Toyota Motor Corporation
Vehicle Make: LEXUS
Vehicle Model: CT
Model Year: 2014
Summary
Brake booster stopped working. Brake efficiency declined, ABS and stability control stopped working. Brake master cylinder and brake booster had to be replaced.
Read More...NHTSA ID Number: 11720695
Complaint Date: 2026-02-26
Fail Date: 2026-02-15
Manufacturer Name: Chrysler (FCA US, LLC)
Vehicle Make: CHRYSLER
Vehicle Model: PACIFICA
Model Year: 2017
Summary
Description of Incident: On February 15, 2026, my 2017 Chrysler Pacifica Hybrid experienced three distinct and severe safety system failures involving the electrical system, power seats, and the power sliding door. Power Sliding Door Sensor Failure: While my minor son was entering the vehicle, the power sliding door closed on his leg. The pinch sensor failed to detect the obstruction and did not reverse. This resulted in physical bruising and marks on the limb (photographic evidence maintained). Unintended Passenger Seat Motion: While the vehicle was stationary, the front passenger power seat moved forward to its maximum limit without user input. I was seated in the chair at the time and was pinned against the dashboard before I could intervene. Electrical Shock: My minor daughter received a perceptible electric shock upon touching the exterior door-handle button to open the sliding door. Components Involved: Electrical System Seats (Power) Sliding Door (Power) Injuries: Yes (Soft tissue bruising/marks to minor’s leg). Risk to Safety: Had the driver's seat moved forward without input while the vehicle was in motion, this absolutely could result in loss of control of the vehicle and an accident. Had the sliding side door continued to close on my son's leg, it could have caused severe injury. Had the electrical shock been worse, it could have resulted in burn or injury. The vehicle is available for inspection. It has not yet been inspected by the manufacturer, police, or insurance. The issues have not repeated at this point, although the vehicle was not used the last 12 days. I do not have confidence in its electrical components. There were no warning lamps, messages, or other indications of any problem with the vehicle.
Read More...NHTSA ID Number: 11720694
Complaint Date: 2026-02-26
Fail Date: 2026-01-28
Manufacturer Name: General Motors, LLC
Vehicle Make: CHEVROLET
Vehicle Model: EQUINOX
Model Year: 2021
Summary
The check engine light came on and the engine lowered performance because the intercooler froze and cracked. Despite there being a service update to stop that from happening, we were never informed of the update from Chevy, only once it had happened did they tell us about the update and included it in the repair cost.
Read More...NHTSA ID Number: 11720693
Complaint Date: 2026-02-26
Fail Date: 2026-02-26
Manufacturer Name: Honda (American Honda Motor Co.)
Vehicle Make: HONDA
Vehicle Model: CR-V
Model Year: 2026
Summary
New vehicle with 299 miles, use remote start and heard loud vibration, ticking noise coming from vehicle. Upon entering vehicle ( check engine light ) emissions system problems. power may be reduced. See your dealer.
Read More...NHTSA ID Number: 11720692
Complaint Date: 2026-02-26
Fail Date: 2024-02-26
Manufacturer Name: Kia America, Inc.
Vehicle Make: KIA
Vehicle Model: SORENTO
Model Year: 2019
Summary
The contact owns a 2019 Kia Sorento. The contact stated while reversing in rainy weather, the rearview camera image was distorted. The contact received notification of NHTSA Campaign Number: 23V639000 (Back Over Prevention), and the vehicle was taken to the dealer, where additional water proofing to the camera harness was added, but the rearview camera was not replaced. The contact stated that the failure persisted after the recall repair. The dealer and the manufacturer were not contacted. The vehicle was not repaired. The failure mileage was approximately 49,000.
Read More...NHTSA ID Number: 11720691
Complaint Date: 2026-02-26
Fail Date: 2026-02-20
Manufacturer Name: Kia America, Inc.
Vehicle Make: KIA
Vehicle Model: EV9
Model Year: 2024
Summary
[XXX] Message says warning "check ev system". they then sent a letter saying it had to go to the dealer, or the car would need A tow potentially. I can't get an appointment as they are way too busy to do anything other than tell me they will get back to me, repeatedly stating they will do so in one business day. it has been a week. My wife is scared to drive the car. I think it is bogus as no recall has been issued. I have had the car for 19 months with no such warning. Two days after it shows up on the screen in the car i receive the letter. This is fishy. it is either a recall, or it isn't. if it is why is it not in your data base? The vagueness of the message is inappropriate, and it implies danger. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
Read More...NHTSA ID Number: 11720690
Complaint Date: 2026-02-26
Fail Date: 2026-02-25
Manufacturer Name: Chrysler (FCA US, LLC)
Vehicle Make: CHRYSLER
Vehicle Model: PACIFICA
Model Year: 2018
Summary
2018 Pacifica with 3.6L engine. Blown head gasket at 69k miles with coolant leaking into cylinder 5. The engine is very hesitant upon acceleration and can be dangerous when pulling out into traffic. This is an all too common issue and needs to be addressed by Chrysler. Engines should not be failing this at 69k. I change oil every 4k miles which is way ahead of the recommended schedule by Chrysler. Coolant was done by the dealer after radiator replacement for a radiator leak at 52k miles.
Read More...NHTSA ID Number: 11720689
Complaint Date: 2026-02-26
Fail Date: 2026-01-26
Manufacturer Name: Toyota Motor Corporation
Vehicle Make: TOYOTA
Vehicle Model: CAMRY
Model Year: 2011
Summary
Upon looking to purchase another vehicle I ran the vin on my 2011 Toyota camry and noticed when looking at NHTSA it showed an incident that someone reported under my vin number, So I figured I would try vin # with 0 (zero) instead and nothing came up. So now I'm wondering what's going on with vin #? Is it possible for 2 toyotas to have same vin?
Read More...NHTSA ID Number: 11720688
Complaint Date: 2026-02-26
Fail Date: 2026-02-25
Manufacturer Name: General Motors, LLC
Vehicle Make: GMC
Vehicle Model: SIERRA 1500
Model Year: 2022
Summary
Following engine replacement per NHTSA for 6.2l GMC engine. I am submitting a safety complaint regarding my 2022 GMC Sierra 1500 Denali (refresh body style). The vehicle has experienced repeated failures of driver-assist features and safety system warnings, including: Dash messages: “Lane Keeping Assist System Unavailable” and “Service Safety Restraint System.” When the fault occurs, driver-assist features including Adaptive Cruise Control become inoperative. The issue has recurred multiple times, including after repairs. After one event, the truck sat parked approximately 10 days and the battery discharged to failure and required replacement. A dealership visit documented DTC U3000 (“Internal Electronic Failure”) in the front view camera module. The dealer replaced/programmed/calibrated the front camera on 02/09/2026 at approximately 58,405 miles (invoice/RO #285795). The symptoms have recurred despite prior resets and this repair. I am concerned about loss of driver-assist functions while driving and the presence of a safety restraint system warning. Please investigate whether there is a defect related to the front camera/driver-assist systems and/or electrical module behavior that can cause repeat faults and battery drain on this model.
Read More...
- CEL Doctor: The ANCEL AD310 is one of the best-selling OBD II scanners on the market and is recommended by Scotty Kilmer, a YouTuber and auto mechanic. It can easily determine the cause of the check engine light coming on. After repairing the vehicle's problems, it can quickly read and clear diagnostic trouble codes of emission system, read live data & hard memory data, view freeze frame, I/M monitor readiness and collect vehicle information.
- Sturdy and Compact: Equipped with a 2.5 foot cable made of very thick, flexible insulation. It is important to have a sturdy scanner as it can easily fall to the ground when working in a car. The AD310 OBD2 scanner is a well-constructed mechanic tool with a sleek design. It weighs 12 ounces and measures 8.9 x 6.9 x 1.4 inches. Thanks to its compact design and light weight, transporting the device is not a problem. The buttons are clearly labelled and the screen is large and displays results clearly.
- Accurate Fast and Easy to Use: The AD310 scanner can help you or your mechanic understand if your car is in good condition, provides exceptionally accurate and fast results, reads and clears engine trouble emission codes in seconds after you fixed the problem. This device will let you know immediately and fix the problem right away without any car knowledge. No need for batteries or a charger, get power directly from the OBDII Data Link Connector in your vehicle.
- OBDII Protocols and Car Compatibility: Many cheap scan tools do not really support all OBD2 protocols. AD310 scanner as it can support all OBDII protocols such as KWP2000, J1850 VPW, ISO9141, J1850 PWM and CAN. This device also has extensive vehicle compatibility with 1996 US-based, 2000 EU-based and Asian cars, light trucks, SUVs, as well as newer OBD2 and CAN vehicles both domestic and foreign. Pls confirm with our customer service whether it is compatible with your vehicle before purchasing.
- Home Necessity and Worthy to Own: This is an excellent code reader to travel or home with as it weighs less and it is compact in design. You can easily slide it in your backpack as you head to the garage, or put it on the dashboard, this will be a great fit for you. The AD310 is not only portable, but also accurate and fast in performance. Moreover, it covers various car brands and is suitable for people who just need a code reader to check their car.
- Multi-Functions - Practical Multi-Functions OBD2 code reader features built-in OBD2 DTC lookup library, which help you to determine the cause of the engine light, read code, erase code, view freeze frame, I/M ready, vehicle information, data flow, real-time curve, get vehicle speed information, calculate load value, engine coolant temperature, get engine speed.
- Wide Capability - Supports 9 protocols compatible with most 1996 US-Based, 2000 EU-Based and Asian cars, and newer OBD II & CAN domestic or import vehicles. Supports 6 languages - English,German, Dutch, Spanish, French, Italian.
- 2.8" LCD Display - Designed with a clear display 2.8" Large LCD screen - white backlight and contrast adjustment. No need any battery or charger, OBD reader gets the power directly from your vehicle through the OBDII Data Link Connector.
- Compact Design - Car diagnostic scanner is equipped with a 2.5 feet long cable and made of a very thick flexible insulator.There are 6 buttons on OBD2 Scanner:scroll up/down,enter/exit and buttons that quick query VIN vehicle number& the DTC fault code.
- ABS / Airbag codes NOT Supported - It is able to read and clear check engine information which is part of OBDII system, but it cannot work with non-OBDII systems, including ABS / Airbag / Oil Service Light, etc.
- 【Your Personal CEL Doctor – Read & Clear Engine Codes】The NT301 OBD2 scanner lets you read diagnostic trouble codes (DTCs), check em-issions readiness, turn off your Check Engine Light (CEL) or MIL, reset monitors, and view live data streams. It retrieves your vehicle's VIN instantly. Like all standard OBD2 scanners, it clears codes only after repairs are completed—if the issue persists, the code will return. Designed for DIYers who want to understand what’s really going on under the hood.
- 【Easy Code Reading – Just Plug & Play】Simply plug into the OBD2 port, turn the ignition to “ON” (engine off), and select the correct menu: Select OBDII-> Wait for seconds-> Select Read codes. For accurate results, ensure your vehicle is compatible and the OBD2 port is free from damage or wiring issues. No batteries needed— powered directly by your car.
- 【Live Data Graphing & Accuracy for Most OBD2 Vehicles】View and log live sensor data in graph form—monitor oxygen sensors, fuel trims, coolant temp, RPM, and more. Spot trends and suspicious values in real time. Compatible with most 1996+ gasoline cars, light trucks, and SUVs sold in the U.S., as well as many 2000+ European and Asian models. Also works on 12V diesel vehicles equipped with OBD2.
- 【S-mog Check Helper – Know Your Readiness Status at a Glance】With dedicated I/M readiness hotkeys and a simple Red-Yellow-Green LED indicator, you’ll instantly know if your vehicle is ready for em-issions testing. Built-in speaker provides audio feedback. No guesswork—just confidence before you head to the test center.
- 【A Must-Have Tool for Every Home Mechanic】Compact, rugged, and ready to use right out of the box. The 2.8” color screen is easy to read, even in daylight. No charging or setup required—just plug into the 16-pin DLC and start diagnosing. Recommended by professional mechanics on YouTube and trusted by DIYers worldwide.
Last update on 2026-03-20 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.