NHTSA ID Number: 11719247
Complaint Date: 2026-02-19
Fail Date: 2026-02-17
Manufacturer Name: Hyundai Motor America
Vehicle Make: HYUNDAI
Vehicle Model: ELANTRA
Model Year: 2018
Summary
Cars engines stopped for no apparent reason pulled over and it started back up but it stopped two more times within a two block radius both times it restarted the date was2/17 26 on the next day it did the same thing but only once
Read More...NHTSA ID Number: 11719246
Complaint Date: 2026-02-19
Fail Date: 2026-02-16
Manufacturer Name: Nissan North America, Inc.
Vehicle Make: NISSAN
Vehicle Model: MURANO
Model Year: 2017
Summary
Technical Incident Report: Electrical Component Failure Reference: Technical Service Bulletin NTB19-004 Part Number: 873D6-5AA6A (Control Unit/Actuator) Incident Overview On 2/16/26, the vehicle was being operated by the primary driver when a suspected electrical failure occurred. Upon subsequent inspection, the 873D6-5AA6A control unit and its associated wiring harness were found to be severely compromised by thermal damage. Detailed Observations: Thermal Damage: The control unit housing showed significant melting. Residual smoke was present during the inspection, indicating a high-temperature event caused by a short circuit or component failure. Harness Integrity: The wiring harness insulation was melted and charred. Due to the extreme heat, the plastic connector had become brittle and lost all structural integrity. Component Failure: During the attempt to disconnect the unit for safety inspection, the connector shattered, leaving the internal wiring of the harness exposed. Documentation: High-resolution photographs have been captured to document the state of the melted housing, the shattered connector, and the exposed wiring.
Read More...NHTSA ID Number: 11719245
Complaint Date: 2026-02-19
Fail Date: 2026-02-18
Manufacturer Name: Toyota Motor Corporation
Vehicle Make: TOYOTA
Vehicle Model: SIENNA
Model Year: 2014
Summary
The vehicle died while driving and when I try to start again it will crank but can't start.
Read More...NHTSA ID Number: 11719244
Complaint Date: 2026-02-19
Fail Date: 2025-11-21
Manufacturer Name: Toyota Motor Corporation
Vehicle Make: TOYOTA
Vehicle Model: SIENNA HYBRID
Model Year: 2025
Summary
We were notified by Toyota that it was unsafe to transport our children in the second row seats in November 2025 and the vehicle was under a recall. This puts our children at risk. A letter from NHTSA stated Toyota would have a remedy by 12/6. The manufacturer (Toyota) confirmed this recall. The seat always shook but we assumed it was the carseats shaking, but, upon removing them to take the car to the dealer, we were still hearing the shaking even without the carseats. Given that Toyota has not indicated a solution date for this and the problem was discovered in October 2025 I believe the manufacturer has failed or is unable to remedy this safety recall for our vehicle in a timely manner and would like to officially log a complaint with NHTSA.
Read More...NHTSA ID Number: 11719243
Complaint Date: 2026-02-19
Fail Date: 2026-02-17
Manufacturer Name: Nissan North America, Inc.
Vehicle Make: NISSAN
Vehicle Model: ROGUE
Model Year: 2024
Summary
The rear glass got shattered unexpectedly without any impact.
Read More...NHTSA ID Number: 11719242
Complaint Date: 2026-02-19
Fail Date: 2026-02-19
Manufacturer Name: General Motors, LLC
Vehicle Make: CHEVROLET
Vehicle Model: SILVERADO 1500
Model Year: 2020
Summary
In several situations, I have lost partial or complete power steering ability. Once, while driving, I recieved a SERVICE ESC message and steering became quite difficult. Another time, power steering was completely gone, making steering impossible, although every other aspect of the vehicle operated normally. In both instances, there was no clear issue and after some time with the vehicle parked and off, it would return to normal. Possible loss of power steering unexpectedly is a serious concern at this point.
Read More...NHTSA ID Number: 11719241
Complaint Date: 2026-02-19
Fail Date: 2026-02-19
Manufacturer Name: Honda (American Honda Motor Co.)
Vehicle Make: HONDA
Vehicle Model: ODYSSEY
Model Year: 2018
Summary
The vehicle previously received a manufacturer dash wiring recall repair. After the recall repair was completed, the vehicle began experiencing intermittent and cascading electrical and communication failures across multiple integrated systems. Affected systems include Apple CarPlay, the DVD system, in-vehicle camera systems, CabinWatch, and repeated “MOST network unavailable” error messages. These failures occur intermittently and result in multiple systems disabling simultaneously. The vehicle was inspected by a Honda dealership, which confirmed the issue involves wiring within the dash harness. The dealership stated the affected wiring is not sold or serviceable separately and that correction would require replacement of the entire dash harness, but that this portion of the harness is not included in the original recall coverage. Because these systems share common power and communication pathways, failures cascade across multiple modules. When the camera system fails, rear view camera functionality and related warnings are unavailable while backing up, reducing the driver’s ability to detect obstacles, pedestrians, or children behind the vehicle. When CabinWatch is unavailable, the driver is unable to visually monitor children seated in the rear rows while driving, which affects situational awareness and the ability to respond quickly to unsafe conditions inside the vehicle. These failures also impact driver information systems and create intermittent loss of critical visual feedback, increasing driver distraction as systems drop out unexpectedly while the vehicle is in operation. The condition began after the recall repair and appears to be related to or a continuation of the original recall defect. The vehicle remains available for inspection, and the condition has been confirmed by a manufacturer-authorized dealer.
Read More...NHTSA ID Number: 11719240
Complaint Date: 2026-02-19
Fail Date: 2026-02-09
Manufacturer Name: BMW of North America, LLC
Vehicle Make: BMW
Vehicle Model: 328I
Model Year: 2011
Summary
> While driving the car, the low oil pressure indicator came on, and within less than a mile later there was a sudden loss of power, engine stalled and then would not start again, requiring the vehicle to be towed off the road and to a repair garage. > Vehicle was immobile on the road putting driver of this vehicle and other vehicles on the road at risk of an accident and injury. > Vehicle originally inspected by non-dealership garage that strongly recommended the vehicle be evaluated by BMW. Vehicle was towed to and has been inspected by BMW Sewickley [XXX] . > Only immediately prior to stall. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
Read More...NHTSA ID Number: 11719239
Complaint Date: 2026-02-19
Fail Date: 2026-02-19
Manufacturer Name: General Motors, LLC
Vehicle Make: CHEVROLET
Vehicle Model: TRAILBLAZER
Model Year: 2025
Summary
My car along with multiple other cars like mine are having issues with the back up camera not working. I have to take it into a Chevrolet dealer to get it replaced. It is a huge safety concern and a recall needs to be issued.
Read More...NHTSA ID Number: 11719238
Complaint Date: 2026-02-19
Fail Date: 2026-02-17
Manufacturer Name: Tesla, Inc.
Vehicle Make: TESLA
Vehicle Model: MODEL Y
Model Year: 2024
Summary
Driver side front window auto rolled back up after pressing the button to once to roll it down. This happened while driving while the right hand was on the steering wheel. The left hand got caught inbetween the window glass and the window frame as it auto rolled back up on its own. It caused bleeding and pain to the left hand.
Read More...
- CEL Doctor: The ANCEL AD310 is one of the best-selling OBD II scanners on the market and is recommended by Scotty Kilmer, a YouTuber and auto mechanic. It can easily determine the cause of the check engine light coming on. After repairing the vehicle's problems, it can quickly read and clear diagnostic trouble codes of emission system, read live data & hard memory data, view freeze frame, I/M monitor readiness and collect vehicle information.
- Sturdy and Compact: Equipped with a 2.5 foot cable made of very thick, flexible insulation. It is important to have a sturdy scanner as it can easily fall to the ground when working in a car. The AD310 OBD2 scanner is a well-constructed mechanic tool with a sleek design. It weighs 12 ounces and measures 8.9 x 6.9 x 1.4 inches. Thanks to its compact design and light weight, transporting the device is not a problem. The buttons are clearly labelled and the screen is large and displays results clearly.
- Accurate Fast and Easy to Use: The AD310 scanner can help you or your mechanic understand if your car is in good condition, provides exceptionally accurate and fast results, reads and clears engine trouble emission codes in seconds after you fixed the problem. This device will let you know immediately and fix the problem right away without any car knowledge. No need for batteries or a charger, get power directly from the OBDII Data Link Connector in your vehicle.
- OBDII Protocols and Car Compatibility: Many cheap scan tools do not really support all OBD2 protocols. AD310 scanner as it can support all OBDII protocols such as KWP2000, J1850 VPW, ISO9141, J1850 PWM and CAN. This device also has extensive vehicle compatibility with 1996 US-based, 2000 EU-based and Asian cars, light trucks, SUVs, as well as newer OBD2 and CAN vehicles both domestic and foreign. Pls confirm with our customer service whether it is compatible with your vehicle before purchasing.
- Home Necessity and Worthy to Own: This is an excellent code reader to travel or home with as it weighs less and it is compact in design. You can easily slide it in your backpack as you head to the garage, or put it on the dashboard, this will be a great fit for you. The AD310 is not only portable, but also accurate and fast in performance. Moreover, it covers various car brands and is suitable for people who just need a code reader to check their car.
- Multi-Functions - Practical Multi-Functions OBD2 code reader features built-in OBD2 DTC lookup library, which help you to determine the cause of the engine light, read code, erase code, view freeze frame, I/M ready, vehicle information, data flow, real-time curve, get vehicle speed information, calculate load value, engine coolant temperature, get engine speed.
- Wide Capability - Supports 9 protocols compatible with most 1996 US-Based, 2000 EU-Based and Asian cars, and newer OBD II & CAN domestic or import vehicles. Supports 6 languages - English,German, Dutch, Spanish, French, Italian.
- 2.8" LCD Display - Designed with a clear display 2.8" Large LCD screen - white backlight and contrast adjustment. No need any battery or charger, OBD reader gets the power directly from your vehicle through the OBDII Data Link Connector.
- Compact Design - Car diagnostic scanner is equipped with a 2.5 feet long cable and made of a very thick flexible insulator.There are 6 buttons on OBD2 Scanner:scroll up/down,enter/exit and buttons that quick query VIN vehicle number& the DTC fault code.
- ABS / Airbag codes NOT Supported - It is able to read and clear check engine information which is part of OBDII system, but it cannot work with non-OBDII systems, including ABS / Airbag / Oil Service Light, etc.
- 【Your Personal CEL Doctor – Read & Clear Engine Codes】The NT301 OBD2 scanner lets you read diagnostic trouble codes (DTCs), check em-issions readiness, turn off your Check Engine Light (CEL) or MIL, reset monitors, and view live data streams. It retrieves your vehicle's VIN instantly. Like all standard OBD2 scanners, it clears codes only after repairs are completed—if the issue persists, the code will return. Designed for DIYers who want to understand what’s really going on under the hood.
- 【Easy Code Reading – Just Plug & Play】Simply plug into the OBD2 port, turn the ignition to “ON” (engine off), and select the correct menu: Select OBDII-> Wait for seconds-> Select Read codes. For accurate results, ensure your vehicle is compatible and the OBD2 port is free from damage or wiring issues. No batteries needed— powered directly by your car.
- 【Live Data Graphing & Accuracy for Most OBD2 Vehicles】View and log live sensor data in graph form—monitor oxygen sensors, fuel trims, coolant temp, RPM, and more. Spot trends and suspicious values in real time. Compatible with most 1996+ gasoline cars, light trucks, and SUVs sold in the U.S., as well as many 2000+ European and Asian models. Also works on 12V diesel vehicles equipped with OBD2.
- 【S-mog Check Helper – Know Your Readiness Status at a Glance】With dedicated I/M readiness hotkeys and a simple Red-Yellow-Green LED indicator, you’ll instantly know if your vehicle is ready for em-issions testing. Built-in speaker provides audio feedback. No guesswork—just confidence before you head to the test center.
- 【A Must-Have Tool for Every Home Mechanic】Compact, rugged, and ready to use right out of the box. The 2.8” color screen is easy to read, even in daylight. No charging or setup required—just plug into the 16-pin DLC and start diagnosing. Recommended by professional mechanics on YouTube and trusted by DIYers worldwide.
Last update on 2026-03-27 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.