NHTSA ID Number: 11719227
Complaint Date: 2026-02-19
Fail Date: 2025-09-01
Manufacturer Name: Mazda Motor Corp.
Vehicle Make: MAZDA
Vehicle Model: MAZDA3
Model Year: 2020
Summary
My Mazda3 began producing a chirp when shifting from 3rd to 4th gear (automatic transmission). The dealer stated that the car needed a new torque converter. At the time the car only 37,000 miles on it, quite low mileage for a torque converter to fail. Mazda has previously admitted to producing cars with faulty torque converters, as specified in Mazda TXXXXXX] ). While my car fit the description of both the problem and proposed fix, and also fell within the applicable models/VINs listed on the TSB, Mazda corporate HQ stated that my specific VIN was not covered by the TSB, and therefore the repair cost was my responsibility. Since the problem, solution, and general vehicle type are entirely as described in the TSB, it appears possible that the TSB was too narrowly scoped and omitted impacted vehicles, to the detriment of owners. This would also cause potential safety concerns, since an unrepaired torque converter could produce unexpected shifting problems. Therefore I suggest that NHTSA investigate to determine if additional vehicles are impacted by Mazda's faulty torque converters. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
Read More...NHTSA ID Number: 11719226
Complaint Date: 2026-02-19
Fail Date: 2026-01-07
Manufacturer Name: Chrysler (FCA US, LLC)
Vehicle Make: JEEP
Vehicle Model: GRAND CHEROKEE
Model Year: 2021
Summary
The screen for mapping other controls is delaminating, creating a safety and distraction hazard
Read More...NHTSA ID Number: 11719225
Complaint Date: 2026-02-19
Fail Date: 2025-11-08
Manufacturer Name: Chrysler (FCA US, LLC)
Vehicle Make: JEEP
Vehicle Model: PATRIOT
Model Year: 2014
Summary
The vehicle was parked in front of my house, completely away from all traffic or other probable causes. The driver's side head rest deployed for no apparent reason. My vehicle had no scratches or dents. If you need to come see it, let me know. Now if I do have an accident, I'm at risk of head and neck injuries. I spoke to a certified Jeep dealership mechanic that told me replacement parts were no longer available. He did not inform me of any recalls or issues with this make and model and made it sound like an expensive repair. After looking this issue up on the internet, it seems to have happened to others. The deployment did not activate the airbags or turn on the warning light on my dash.
Read More...NHTSA ID Number: 11719224
Complaint Date: 2026-02-19
Fail Date: 2025-08-20
Manufacturer Name: Nissan North America, Inc.
Vehicle Make: NISSAN
Vehicle Model: PATHFINDER
Model Year: 2024
Summary
Rear break pads and tires required to be replaced with 20k miles on the odometer. The vehicle is serviced regularly and well maintained. It is a very known issue that the vehicles weight causes abnormal and quick wear for the rear break pads. This is a major safety concern and needs to be addressed by Nissan as they do not provide a standard lifespan for these components that you would normally expect. This issue poises a higher risk of accidents, injuries, or death. Especially for someone that doesn’t know vehicles well
Read More...NHTSA ID Number: 11719223
Complaint Date: 2026-02-19
Fail Date: 2025-11-20
Manufacturer Name: Honda (American Honda Motor Co.)
Vehicle Make: HONDA
Vehicle Model: HR-V
Model Year: 2016
Summary
My vehicle suddenly developed electrical problems and would not start. Before it completely failed, I began seeing warning lights on the dashboard, including a PARK warning and an engine oil light. The vehicle had been operating normally earlier that day, but later became totally unresponsive. The doors would not unlock electronically and the car would not start. This happened after a period of heavy rain. When the vehicle was inspected by a Honda dealership, they found signs of long-term water intrusion and corrosion affecting electrical components and wiring. I later learned that the vehicle had previously been repaired for water intrusion through the rear hatch/tailgate area, which may have allowed moisture into the vehicle over time. The car is now inoperable. This raises safety concerns because electrical failures like this can lead to sudden loss of reliability, inability to start the vehicle when needed, or potential failure while driving. The issue has been confirmed by a dealership service department, and the vehicle remains unusable. I am concerned that water may be entering through the tailgate or rear hatch area and damaging electrical systems. I have also seen similar complaints involving water intrusion and electrical failures in this model.
Read More...NHTSA ID Number: 11719222
Complaint Date: 2026-02-19
Fail Date: 2026-02-05
Manufacturer Name: Hyundai Motor America
Vehicle Make: HYUNDAI
Vehicle Model: TUCSON
Model Year: 2018
Summary
Hyundai Tucson has been jerking and shaking for over over 4 years now and either when taking to the dealership they reset the dual clutch and have replaced the same part twice in the dual clutch. This shaking has been happening since the car was bought brand new like a year after. The vehicle now will get stuck in gear and while driving will go down to 20 mph and get stuck in that speed. This is a serious safety issue. The dealer could replicate the shaking but not the gears being stuck. It has happened on more than one occasion and they just reset something but this continues to happen. There are no warning lights when the gears get stuck it just happens while driving and it has happened twice now in the last 3 weeks.
Read More...NHTSA ID Number: 11719221
Complaint Date: 2026-02-19
Fail Date: 2026-02-19
Manufacturer Name: Daimler Trucks North America, LLC
Vehicle Make: FREIGHTLINER
Vehicle Model: M2
Model Year: 2021
Summary
The contact owns a 2021 Freightliner XC-M. The contact became aware that the VIN was included in NHTSA Campaign Numbers: 21V00H000 (ELECTRICAL SYSTEM, EXTERIOR LIGHTING) and 21V921000 (TIRES). The contact had not experienced a failure. The contact reached out to the manufacturer with questions about the recalls. The vehicle was repaired under NHTSA Campaign Number: 21V00H000 (ELECTRICAL SYSTEM, EXTERIOR LIGHTING). However, the manufacturer informed the contact that the repair for NHTSA Campaign Number: 21V921000 (TIRES) would not be completed because the recall had expired.
Read More...NHTSA ID Number: 11719220
Complaint Date: 2026-02-19
Fail Date: 2026-01-24
Manufacturer Name: Toyota Motor Corporation
Vehicle Make: TOYOTA
Vehicle Model: TUNDRA
Model Year: 2016
Summary
The steering rack internal seal inside the steering rack failed/ "blew" per mechanic and is leaking. I could lose my ability to steer at any time while driving my vehicle and wreck. It is currently at the Toyota services center in Gladstone, OR and has been diagnosed. No other representatives have inspected the vehicle. There were no warnings or signs of failure. I had originally taken my truck in to have an oil change and have it checked for a "slow" start up.
Read More...NHTSA ID Number: 11719219
Complaint Date: 2026-02-19
Fail Date: 2026-01-30
Manufacturer Name: Kia America, Inc.
Vehicle Make: KIA
Vehicle Model: TELLURIDE
Model Year: 2023
Summary
KIA/HYUNDAI INSPECTED AND FOUND CYLINDER 2 TO NOT FIRE ALONG WITH OIL LEAKING FROM LOWER 02 SENSOR. ENGINE BLOCK HAS HOLE, CYL 2 PISTON AND ROD ARE NO LONGER WITH/IN ENGINE. THIS OCCURED WHILE ACCELERATING ON THE FREEWAY ALL OF A SUDDEN VEHICLE STARTED SMOKING THEN LOST THE ABILITY TO ACCELERATE IT WAS VERY SCARY BEING STUCK ON THE FREEWAY WAS ALMOST HIT MULTIPLE TIMES.
Read More...NHTSA ID Number: 11719218
Complaint Date: 2026-02-19
Fail Date: 2026-02-18
Manufacturer Name: Honda (American Honda Motor Co.)
Vehicle Make: HONDA
Vehicle Model: PROLOGUE
Model Year: 2025
Summary
The vehicle has twice displayed a “Service High Voltage System” warning followed by “Reduced Acceleration – Drive With Care.” When this occurs, the vehicle enters a reduced-power (turtle) mode that severely limits acceleration. Cabin heat also stopped working, and the vehicle would not charge beyond approximately 25%, restricting driving range. OnStar diagnostics reported a critical error. The vehicle and diagnostic history are available for inspection upon request. The first incident occurred while driving around town. Although I was close to home, the reduced acceleration created concern because the vehicle could not respond normally to traffic. The second incident was significantly more dangerous and occurred in heavy traffic and on the freeway about 40 miles from home during heavy rain. The limited acceleration made merging and maintaining a safe traffic speed difficult, placing myself and others at risk. I have only been able to get the dealer to take the vehicle in one time, specifically for this issue, and that was because the warning lights were still on at arrival. Staff observed the warnings at check-in, but by the time the vehicle reached the service area, the lights had cleared. The dealer stated they could not perform repairs without active warnings, though stored codes reportedly indicated a low-voltage condition. Additionally, a clicking noise from the wheel area began about 1,500 miles ago and occurs consistently when turning, similar to a CV axle concern. During a separate visit, the dealer put in writing that they could not do anything about the noise and did not diagnose or inspect it, which left me uneasy about potential drivetrain safety. The intermittent high-voltage fault, reduced acceleration, charging limitation, loss of heat, and unresolved drivetrain noise create ongoing safety concerns due to the unpredictable nature of the failures.
Read More...
- CEL Doctor: The ANCEL AD310 is one of the best-selling OBD II scanners on the market and is recommended by Scotty Kilmer, a YouTuber and auto mechanic. It can easily determine the cause of the check engine light coming on. After repairing the vehicle's problems, it can quickly read and clear diagnostic trouble codes of emission system, read live data & hard memory data, view freeze frame, I/M monitor readiness and collect vehicle information.
- Sturdy and Compact: Equipped with a 2.5 foot cable made of very thick, flexible insulation. It is important to have a sturdy scanner as it can easily fall to the ground when working in a car. The AD310 OBD2 scanner is a well-constructed mechanic tool with a sleek design. It weighs 12 ounces and measures 8.9 x 6.9 x 1.4 inches. Thanks to its compact design and light weight, transporting the device is not a problem. The buttons are clearly labelled and the screen is large and displays results clearly.
- Accurate Fast and Easy to Use: The AD310 scanner can help you or your mechanic understand if your car is in good condition, provides exceptionally accurate and fast results, reads and clears engine trouble emission codes in seconds after you fixed the problem. This device will let you know immediately and fix the problem right away without any car knowledge. No need for batteries or a charger, get power directly from the OBDII Data Link Connector in your vehicle.
- OBDII Protocols and Car Compatibility: Many cheap scan tools do not really support all OBD2 protocols. AD310 scanner as it can support all OBDII protocols such as KWP2000, J1850 VPW, ISO9141, J1850 PWM and CAN. This device also has extensive vehicle compatibility with 1996 US-based, 2000 EU-based and Asian cars, light trucks, SUVs, as well as newer OBD2 and CAN vehicles both domestic and foreign. Pls confirm with our customer service whether it is compatible with your vehicle before purchasing.
- Home Necessity and Worthy to Own: This is an excellent code reader to travel or home with as it weighs less and it is compact in design. You can easily slide it in your backpack as you head to the garage, or put it on the dashboard, this will be a great fit for you. The AD310 is not only portable, but also accurate and fast in performance. Moreover, it covers various car brands and is suitable for people who just need a code reader to check their car.
- Multi-Functions - Practical Multi-Functions OBD2 code reader features built-in OBD2 DTC lookup library, which help you to determine the cause of the engine light, read code, erase code, view freeze frame, I/M ready, vehicle information, data flow, real-time curve, get vehicle speed information, calculate load value, engine coolant temperature, get engine speed.
- Wide Capability - Supports 9 protocols compatible with most 1996 US-Based, 2000 EU-Based and Asian cars, and newer OBD II & CAN domestic or import vehicles. Supports 6 languages - English,German, Dutch, Spanish, French, Italian.
- 2.8" LCD Display - Designed with a clear display 2.8" Large LCD screen - white backlight and contrast adjustment. No need any battery or charger, OBD reader gets the power directly from your vehicle through the OBDII Data Link Connector.
- Compact Design - Car diagnostic scanner is equipped with a 2.5 feet long cable and made of a very thick flexible insulator.There are 6 buttons on OBD2 Scanner:scroll up/down,enter/exit and buttons that quick query VIN vehicle number& the DTC fault code.
- ABS / Airbag codes NOT Supported - It is able to read and clear check engine information which is part of OBDII system, but it cannot work with non-OBDII systems, including ABS / Airbag / Oil Service Light, etc.
- 【Your Personal CEL Doctor – Read & Clear Engine Codes】The NT301 OBD2 scanner lets you read diagnostic trouble codes (DTCs), check em-issions readiness, turn off your Check Engine Light (CEL) or MIL, reset monitors, and view live data streams. It retrieves your vehicle's VIN instantly. Like all standard OBD2 scanners, it clears codes only after repairs are completed—if the issue persists, the code will return. Designed for DIYers who want to understand what’s really going on under the hood.
- 【Easy Code Reading – Just Plug & Play】Simply plug into the OBD2 port, turn the ignition to “ON” (engine off), and select the correct menu: Select OBDII-> Wait for seconds-> Select Read codes. For accurate results, ensure your vehicle is compatible and the OBD2 port is free from damage or wiring issues. No batteries needed— powered directly by your car.
- 【Live Data Graphing & Accuracy for Most OBD2 Vehicles】View and log live sensor data in graph form—monitor oxygen sensors, fuel trims, coolant temp, RPM, and more. Spot trends and suspicious values in real time. Compatible with most 1996+ gasoline cars, light trucks, and SUVs sold in the U.S., as well as many 2000+ European and Asian models. Also works on 12V diesel vehicles equipped with OBD2.
- 【S-mog Check Helper – Know Your Readiness Status at a Glance】With dedicated I/M readiness hotkeys and a simple Red-Yellow-Green LED indicator, you’ll instantly know if your vehicle is ready for em-issions testing. Built-in speaker provides audio feedback. No guesswork—just confidence before you head to the test center.
- 【A Must-Have Tool for Every Home Mechanic】Compact, rugged, and ready to use right out of the box. The 2.8” color screen is easy to read, even in daylight. No charging or setup required—just plug into the 16-pin DLC and start diagnosing. Recommended by professional mechanics on YouTube and trusted by DIYers worldwide.
Last update on 2026-03-27 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.