NHTSA ID Number: 11719187
Complaint Date: 2026-02-19
Fail Date: 2026-02-18
Manufacturer Name: Nissan North America, Inc.
Vehicle Make: NISSAN
Vehicle Model: ROGUE
Model Year: 2025
Summary
While vehicle was Parked in driveway the rear windshield just exploded suddenly causing glass to fly everywhere. Causing a risk for injury for a human and animal. There was no signs or warnings just happened suddenly. The vehicle has been towed to Nissan for repair but was told to not expect my vehicle back anytime soon. In the mean time I have a loaner.
Read More...NHTSA ID Number: 11719186
Complaint Date: 2026-02-19
Fail Date: 2026-02-19
Manufacturer Name: Ford Motor Company
Vehicle Make: FORD
Vehicle Model: F-150
Model Year: 2022
Summary
The contact owns a 2022 Ford F-150. The contact received notification of NHTSA Campaign Number: 23V896000 (POWER TRAIN); however, the part to do the recall repair was unavailable. The local dealer was contacted and confirmed that the part was not yet available for the recall repair. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure.
Read More...NHTSA ID Number: 11719185
Complaint Date: 2026-02-19
Fail Date: 2026-02-19
Manufacturer Name: Toyota Motor Corporation
Vehicle Make: TOYOTA
Vehicle Model: RAV4
Model Year: 2019
Summary
The contact owns a 2019 Toyota Rav4. The contact stated that while seated in the vehicle, while the vehicle was parked, there was an abnormally strong plastic burning odor inside the vehicle. The contact stated that a top light was plugged in the trunk, but the light was turned off. After opening the trunk, the contact became aware that the wiring in the trunk had overheated and burned the laundry that was inside the vehicle and the rear passenger's side seat. The vehicle was not diagnosed or repaired by an independent mechanic or dealer. The manufacturer was not notified of the failure. The failure mileage was approximately 129,000.
Read More...NHTSA ID Number: 11719184
Complaint Date: 2026-02-19
Fail Date: 2026-01-01
Manufacturer Name: General Motors, LLC
Vehicle Make: CHEVROLET
Vehicle Model: TRAVERSE
Model Year: 2018
Summary
Noxious emissions fill passenger compartment while at idle, or when using remote start. Cannot drive with windows closed, or with recirculation on. Passengers feel, "sleepy". Bracket holding flex pipe fails at the same point in several different traverse vehicles. The 2018 model we have, is not covered by a recall, even though the 2019 of the same design and fail point, is. N222385510 GM is addressing this on only select models, even though the same issue is applicable to other models, and the same part numbers are the cause and or affected.
Read More...NHTSA ID Number: 11719183
Complaint Date: 2026-02-19
Fail Date: 2026-02-02
Manufacturer Name: General Motors, LLC
Vehicle Make: GMC
Vehicle Model: CANYON
Model Year: 2016
Summary
1. The power steering failed when I was driving my 2016 GMC Truck. 2. The failure caused the steering of the truck to be very difficult putting myself and any passengers at risk. 3. This issue occurred on 2/19/26 at about 3:00PM Central time while driving. Power steering warning lights did illuminate. 4. The vehicle has not been inspected by anyone at this time. Please note there is a safety recall associated with the 2015 GMC Canyons for the exact same problem. Instructions were given to submit a report to the NHTSA and the vehicle's owner may be eligible for reimbursement or free repair is a "hidden," warranty extension or "customer satisfaction program" covers it.
Read More...NHTSA ID Number: 11719182
Complaint Date: 2026-02-19
Fail Date: 2025-12-31
Manufacturer Name: Kia America, Inc.
Vehicle Make: KIA
Vehicle Model: EV6
Model Year: 2025
Summary
initially filed XXX (1/2/2026) 2nd (additional info) filed XXX (2/10/2026 3rd (3 page service report) XXX (2/11/2026) Vehicle is registered to Christopher Rojik, however it is my car that I drive, etc. today I am filing this for you folks that since I filed the complaint with Kia Corp. and sent them the service report, etc. Today, 2/19/2026 I received a formal Settlement Agreement and General Release to sign and accept. I am not signing it, as well as it fully releases Kia from any future issues, etc. outside of the warranty and whatever other details it claims. This will or should be the last for me to file. I had no idea they send me this kind of offer. As it is listed specifically as a "GOODWILL GESTURE" and they are not accepting fault or something like that. I attached inidividual pages, hopefully I can upload them as pdfs, we will see. If not I'll take quick pics and attach. thanks INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
Read More...NHTSA ID Number: 11719181
Complaint Date: 2026-02-19
Fail Date: 2026-02-06
Manufacturer Name: Nissan North America, Inc.
Vehicle Make: NISSAN
Vehicle Model: ROGUE
Model Year: 2023
Summary
The contact owns a 2023 Nissan Rogue. The contact stated that while her son was driving 70 MPH, the vehicle abruptly lost power, and there was smoke coming from the engine compartment and tailpipe. The driver pulled over to the side of the highway and turned off the vehicle. The vehicle was towed to a dealer where it was diagnosed with engine failure. The engine was replaced, and the vehicle was repaired. The contact stated that the transmission failed after the engine replacement. There were several unknown warning lights illuminated, and the dealer informed the contact that the battery needed to be replaced. The battery was replaced; however, the warning lights remained illuminated. The dealer then informed the contact that the transmission needed to be replaced. The transmission was not repaired or replaced. The manufacturer was notified of the failure. The failure mileage was 76,633.
Read More...NHTSA ID Number: 11719180
Complaint Date: 2026-02-19
Fail Date: 2026-02-16
Manufacturer Name: Honda (American Honda Motor Co.)
Vehicle Make: HONDA
Vehicle Model: CR-V
Model Year: 2024
Summary
I received a safety recall notice that states that Honda will be replacing the fuel pump due to "improper production". Honda is refusing to replace the fuel pump. They are now stating that they only need to test the pump even though the recall is very clear that it is to be replaced.
Read More...NHTSA ID Number: 11719179
Complaint Date: 2026-02-19
Fail Date: 2025-11-18
Manufacturer Name: Hyundai Motor America
Vehicle Make: HYUNDAI
Vehicle Model: SONATA
Model Year: 2018
Summary
The oil pan is starting to crack, a small drip is now happening but dealership says it could spilt and cause the engine to seize while driving. The pan looks very flimsy compared to my Ford and Toyota.
Read More...NHTSA ID Number: 11719178
Complaint Date: 2026-02-19
Fail Date: 2026-02-10
Manufacturer Name: Chrysler (FCA US, LLC)
Vehicle Make: JEEP
Vehicle Model: GRAND CHEROKEE
Model Year: 2021
Summary
Driver's seat belt retractor doesn't retract all of the time. Hangs up & leaves slack. Bought car & wasn't as bad. Didn't talk to dealer until now. Drove car 800 miles & 4 months since purchase. Dealer service dept says no extended warranty etc. I'm past the original warranty period & the 3 month certified used car warranty. Car was sold on Oct 14, 2025. The equipment checklist form marked that all safety systems were working. I feel a slack belt, getting worse is a safety issue the manufacturer should fix in a 5 year old car. Date is now when it's gotten really slow. It was somewhat that way at purchase. Needed to be shook to retract. Al
Read More...
- CEL Doctor: The ANCEL AD310 is one of the best-selling OBD II scanners on the market and is recommended by Scotty Kilmer, a YouTuber and auto mechanic. It can easily determine the cause of the check engine light coming on. After repairing the vehicle's problems, it can quickly read and clear diagnostic trouble codes of emission system, read live data & hard memory data, view freeze frame, I/M monitor readiness and collect vehicle information.
- Sturdy and Compact: Equipped with a 2.5 foot cable made of very thick, flexible insulation. It is important to have a sturdy scanner as it can easily fall to the ground when working in a car. The AD310 OBD2 scanner is a well-constructed mechanic tool with a sleek design. It weighs 12 ounces and measures 8.9 x 6.9 x 1.4 inches. Thanks to its compact design and light weight, transporting the device is not a problem. The buttons are clearly labelled and the screen is large and displays results clearly.
- Accurate Fast and Easy to Use: The AD310 scanner can help you or your mechanic understand if your car is in good condition, provides exceptionally accurate and fast results, reads and clears engine trouble emission codes in seconds after you fixed the problem. This device will let you know immediately and fix the problem right away without any car knowledge. No need for batteries or a charger, get power directly from the OBDII Data Link Connector in your vehicle.
- OBDII Protocols and Car Compatibility: Many cheap scan tools do not really support all OBD2 protocols. AD310 scanner as it can support all OBDII protocols such as KWP2000, J1850 VPW, ISO9141, J1850 PWM and CAN. This device also has extensive vehicle compatibility with 1996 US-based, 2000 EU-based and Asian cars, light trucks, SUVs, as well as newer OBD2 and CAN vehicles both domestic and foreign. Pls confirm with our customer service whether it is compatible with your vehicle before purchasing.
- Home Necessity and Worthy to Own: This is an excellent code reader to travel or home with as it weighs less and it is compact in design. You can easily slide it in your backpack as you head to the garage, or put it on the dashboard, this will be a great fit for you. The AD310 is not only portable, but also accurate and fast in performance. Moreover, it covers various car brands and is suitable for people who just need a code reader to check their car.
- Multi-Functions - Practical Multi-Functions OBD2 code reader features built-in OBD2 DTC lookup library, which help you to determine the cause of the engine light, read code, erase code, view freeze frame, I/M ready, vehicle information, data flow, real-time curve, get vehicle speed information, calculate load value, engine coolant temperature, get engine speed.
- Wide Capability - Supports 9 protocols compatible with most 1996 US-Based, 2000 EU-Based and Asian cars, and newer OBD II & CAN domestic or import vehicles. Supports 6 languages - English,German, Dutch, Spanish, French, Italian.
- 2.8" LCD Display - Designed with a clear display 2.8" Large LCD screen - white backlight and contrast adjustment. No need any battery or charger, OBD reader gets the power directly from your vehicle through the OBDII Data Link Connector.
- Compact Design - Car diagnostic scanner is equipped with a 2.5 feet long cable and made of a very thick flexible insulator.There are 6 buttons on OBD2 Scanner:scroll up/down,enter/exit and buttons that quick query VIN vehicle number& the DTC fault code.
- ABS / Airbag codes NOT Supported - It is able to read and clear check engine information which is part of OBDII system, but it cannot work with non-OBDII systems, including ABS / Airbag / Oil Service Light, etc.
- 【Your Personal CEL Doctor – Read & Clear Engine Codes】The NT301 OBD2 scanner lets you read diagnostic trouble codes (DTCs), check em-issions readiness, turn off your Check Engine Light (CEL) or MIL, reset monitors, and view live data streams. It retrieves your vehicle's VIN instantly. Like all standard OBD2 scanners, it clears codes only after repairs are completed—if the issue persists, the code will return. Designed for DIYers who want to understand what’s really going on under the hood.
- 【Easy Code Reading – Just Plug & Play】Simply plug into the OBD2 port, turn the ignition to “ON” (engine off), and select the correct menu: Select OBDII-> Wait for seconds-> Select Read codes. For accurate results, ensure your vehicle is compatible and the OBD2 port is free from damage or wiring issues. No batteries needed— powered directly by your car.
- 【Live Data Graphing & Accuracy for Most OBD2 Vehicles】View and log live sensor data in graph form—monitor oxygen sensors, fuel trims, coolant temp, RPM, and more. Spot trends and suspicious values in real time. Compatible with most 1996+ gasoline cars, light trucks, and SUVs sold in the U.S., as well as many 2000+ European and Asian models. Also works on 12V diesel vehicles equipped with OBD2.
- 【S-mog Check Helper – Know Your Readiness Status at a Glance】With dedicated I/M readiness hotkeys and a simple Red-Yellow-Green LED indicator, you’ll instantly know if your vehicle is ready for em-issions testing. Built-in speaker provides audio feedback. No guesswork—just confidence before you head to the test center.
- 【A Must-Have Tool for Every Home Mechanic】Compact, rugged, and ready to use right out of the box. The 2.8” color screen is easy to read, even in daylight. No charging or setup required—just plug into the 16-pin DLC and start diagnosing. Recommended by professional mechanics on YouTube and trusted by DIYers worldwide.
Last update on 2026-03-27 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.