NHTSA ID Number: 11718946
Complaint Date: 2026-02-18
Fail Date: 2026-02-16
Manufacturer Name: General Motors, LLC
Vehicle Make: CADILLAC
Vehicle Model: SRX
Model Year: 2004
Summary
The contact owns a 2004 Cadillac SRX. The contact stated that while driving approximately 65 MPH, the vehicle stalled, and the power steering and power brakes were inoperative. No warning lights were illuminated. The failure had occurred on several occasions. The contact researched and became aware of an unknown recall related to the failure; however, the VIN was not under recall. The vehicle was taken back to the residence, and a dealer was contacted. The contact was informed that the electronic stability control module needed to be replaced. The vehicle was not repaired. The manufacturer was notified of the failure. The failure mileage was unknown.
Read More...NHTSA ID Number: 11718945
Complaint Date: 2026-02-18
Fail Date: 2025-08-01
Manufacturer Name: Ford Motor Company
Vehicle Make: FORD
Vehicle Model: EXPEDITION
Model Year: 2020
Summary
Component/System Failure: The vehicle is experiencing a catastrophic transmission failure (specifically the 10R80 transmission) beyond what is described in Ford TSB 24-2101. The transmission slips significantly and loses all power transmission while in motion. Safety Risk: My safety and the safety of other motorists are at extreme risk. While driving at highway speeds (approx. 65-70 MPH), the vehicle suddenly loses the ability to maintain speed or accelerate. This causes an immediate, unexpected deceleration in high-speed traffic, nearly resulting in rear-end collisions. The system takes several seconds to "reset" or catch a gear, during which time I have zero control over the vehicle's propulsion. This is an intermittent but recurring failure that makes the vehicle unpredictable and life-threatening to operate in traffic. Confirmation/Inspection: The problem has been confirmed by a Ford dealership service center and a secondary certified independent mechanic. Both confirmed the transmission is failing and cited TSB 24-2101 as the diagnostic path. The Ford dealership inspected the vehicle and confirmed that a full transmission replacement is required, but stated they would not provide financial assistance as the vehicle is just past the default warranty, despite the TSB acknowledging a known manufacturing defect. Symptoms/Warning Lamps: Symptoms began approximately August 2025. There were no warning lamps prior to the first failure, although it flashes lights temporarily when the problem occurs. The primary symptom is a sudden "free-spinning" or rattling engine sensation followed by a complete loss of forward momentum. The issue has grown progressively worse over the last months and as such is not safely drivable.
Read More...NHTSA ID Number: 11718944
Complaint Date: 2026-02-18
Fail Date: 2026-02-18
Manufacturer Name: Kia America, Inc.
Vehicle Make: KIA
Vehicle Model: CARNIVAL HYBRID
Model Year: 2025
Summary
While driving the car it will stick in the electric mode and not go back into gas mode. You will only be able to go up to 30-35 miles an hour and in order to fix this issue as of right now all I could do was have to pull over to the side of the road put the car in park turn it off and turn it back on. I worry that this issue will be even worse if I was on the interstate and my car was getting stuck in electric mode and then it’s a safety issue, especially since I have kids in the car. I’m majority of the time being a minivan. I have seen other people post on forms about this issue and it not being fixed by Kia
Read More...NHTSA ID Number: 11718943
Complaint Date: 2026-02-18
Fail Date: 2026-01-30
Manufacturer Name: Hyundai Motor America
Vehicle Make: HYUNDAI
Vehicle Model: IONIQ 5
Model Year: 2025
Summary
At a routine service visit to AutoNation Hyundai/Carlsbad, I received a good report on the 2025 Ioniq 5 condition. Starting the car to drive home I heard a pop sound and noted a diagnostic code that confirmed the ICCU and associated fuse had blown. Since then, Hyundai has been unable to clarify the ETA of the back ordered parts. They provided a loaner but it’s not an EV.
Read More...NHTSA ID Number: 11718942
Complaint Date: 2026-02-18
Fail Date: 2025-02-01
Manufacturer Name: General Motors, LLC
Vehicle Make: CHEVROLET
Vehicle Model: TRAVERSE
Model Year: 2021
Summary
I AM HAVING A LOT OF TRANSMISSION SHUDDER ESPECALLY WHEN ACCELERATING. NOTICED THAT CONSUMER REPORTS STATED IN THEIR MAGAZINE THAT THIS HAS BEEN A BIG PROBLEM FOR AT LEAST 5 YEARS. I DON'T UNDERSTAND WHY NHTSA HAS NOT MADE CHEVROLET DO SOMETHING TO FIX THIS PROBLEM WITH THE TORQUE CONVERTER.
Read More...NHTSA ID Number: 11718941
Complaint Date: 2026-02-18
Fail Date: 2026-01-11
Manufacturer Name: Chrysler (FCA US, LLC)
Vehicle Make: RAM
Vehicle Model: 3500
Model Year: 2020
Summary
The contact owns a 2020 Ram 3500. The contact stated that while the vehicle was parked and turned off, the gear shifter shifted into drive independently, causing the vehicle to roll away. The vehicle stopped before crashing. The vehicle was taken to a dealer; however, the vehicle was not repaired. The manufacturer was notified of the failure. The failure mileage was 75,000.
Read More...NHTSA ID Number: 11718940
Complaint Date: 2026-02-18
Fail Date: 2024-06-22
Manufacturer Name: Harley-Davidson Motor Company
Vehicle Make: HARLEY-DAVIDSON
Vehicle Model: FLHCS ANV
Model Year: 2018
Summary
Oil sumping issues caused by defective oil pump and causes unsafe motorcycle operation, due to engine seizure caused by inadequate oil distribution. This condition and faulty oil pump has been know for years by HDMC.
Read More...NHTSA ID Number: 11718939
Complaint Date: 2026-02-18
Fail Date: 2026-02-18
Manufacturer Name: General Motors, LLC
Vehicle Make: GMC
Vehicle Model: SIERRA 1500
Model Year: 2023
Summary
Engine lost all power while I was attempting to make a left turn at a very busy intersection. Dash kept saying “check battery”, jump pack did nothing. Engine wouldn’t start.
Read More...NHTSA ID Number: 11718938
Complaint Date: 2026-02-18
Fail Date: 2026-02-18
Manufacturer Name: Ford Motor Company
Vehicle Make: FORD
Vehicle Model: F-150
Model Year: 2021
Summary
The vehicle is experiencing a chronic, documented loss of engine coolant with no external leaks identified, accompanied by a persistent odor of burning coolant. Despite nine months of notification and two separate Ford authorized dealerships attempting repairs, the defect remains unresolved. To date, dealerships have performed only 'surface-level' pressure and dye tests. They have refused to perform thorough diagnostics despite the clear evidence of consumption. This creates a severe safety hazard: coolant loss on this engine platform is a known precursor to sudden engine stall and potential engine fire. By failing to identify the internal leak path, Ford is requiring me to operate a vehicle with an unpredictable mechanical deficit. The absence of a Warning Lamp (CEL) does not mitigate the risk; it confirms a mechanical failure that the current onboard diagnostics are failing to capture before a catastrophic event occurs.
Read More...NHTSA ID Number: 11718937
Complaint Date: 2026-02-18
Fail Date: 2026-01-12
Manufacturer Name: Chrysler (FCA US, LLC)
Vehicle Make: RAM
Vehicle Model: 3500
Model Year: 2020
Summary
The contact owns a 2020 Ram 3500. The contact stated that while the vehicle was parked and the engine was turned off, the gear shifter shifted into the drive position when the contact's minor [XXX] child entered the vehicle to retrieve an item using the steering wheel and gear shifter to enter, causing the vehicle to roll down a hill and collide with a tree. The impact resulted in significant damage to the passenger side door, bumper, and truck bed. Although a child was inside the vehicle at the time of the incident, no injuries were reported following the collision. No air bags deployed. The vehicle was towed to a dealer where it had notyet been inspected. The vehicle was not repaired. The manufacturer was notified of the failure. The failure mileage was 150,000. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
Read More...
- CEL Doctor: The ANCEL AD310 is one of the best-selling OBD II scanners on the market and is recommended by Scotty Kilmer, a YouTuber and auto mechanic. It can easily determine the cause of the check engine light coming on. After repairing the vehicle's problems, it can quickly read and clear diagnostic trouble codes of emission system, read live data & hard memory data, view freeze frame, I/M monitor readiness and collect vehicle information.
- Sturdy and Compact: Equipped with a 2.5 foot cable made of very thick, flexible insulation. It is important to have a sturdy scanner as it can easily fall to the ground when working in a car. The AD310 OBD2 scanner is a well-constructed mechanic tool with a sleek design. It weighs 12 ounces and measures 8.9 x 6.9 x 1.4 inches. Thanks to its compact design and light weight, transporting the device is not a problem. The buttons are clearly labelled and the screen is large and displays results clearly.
- Accurate Fast and Easy to Use: The AD310 scanner can help you or your mechanic understand if your car is in good condition, provides exceptionally accurate and fast results, reads and clears engine trouble emission codes in seconds after you fixed the problem. This device will let you know immediately and fix the problem right away without any car knowledge. No need for batteries or a charger, get power directly from the OBDII Data Link Connector in your vehicle.
- OBDII Protocols and Car Compatibility: Many cheap scan tools do not really support all OBD2 protocols. AD310 scanner as it can support all OBDII protocols such as KWP2000, J1850 VPW, ISO9141, J1850 PWM and CAN. This device also has extensive vehicle compatibility with 1996 US-based, 2000 EU-based and Asian cars, light trucks, SUVs, as well as newer OBD2 and CAN vehicles both domestic and foreign. Pls confirm with our customer service whether it is compatible with your vehicle before purchasing.
- Home Necessity and Worthy to Own: This is an excellent code reader to travel or home with as it weighs less and it is compact in design. You can easily slide it in your backpack as you head to the garage, or put it on the dashboard, this will be a great fit for you. The AD310 is not only portable, but also accurate and fast in performance. Moreover, it covers various car brands and is suitable for people who just need a code reader to check their car.
- Multi-Functions - Practical Multi-Functions OBD2 code reader features built-in OBD2 DTC lookup library, which help you to determine the cause of the engine light, read code, erase code, view freeze frame, I/M ready, vehicle information, data flow, real-time curve, get vehicle speed information, calculate load value, engine coolant temperature, get engine speed.
- Wide Capability - Supports 9 protocols compatible with most 1996 US-Based, 2000 EU-Based and Asian cars, and newer OBD II & CAN domestic or import vehicles. Supports 6 languages - English,German, Dutch, Spanish, French, Italian.
- 2.8" LCD Display - Designed with a clear display 2.8" Large LCD screen - white backlight and contrast adjustment. No need any battery or charger, OBD reader gets the power directly from your vehicle through the OBDII Data Link Connector.
- Compact Design - Car diagnostic scanner is equipped with a 2.5 feet long cable and made of a very thick flexible insulator.There are 6 buttons on OBD2 Scanner:scroll up/down,enter/exit and buttons that quick query VIN vehicle number& the DTC fault code.
- ABS / Airbag codes NOT Supported - It is able to read and clear check engine information which is part of OBDII system, but it cannot work with non-OBDII systems, including ABS / Airbag / Oil Service Light, etc.
- 【Your Personal CEL Doctor – Read & Clear Engine Codes】The NT301 OBD2 scanner lets you read diagnostic trouble codes (DTCs), check em-issions readiness, turn off your Check Engine Light (CEL) or MIL, reset monitors, and view live data streams. It retrieves your vehicle's VIN instantly. Like all standard OBD2 scanners, it clears codes only after repairs are completed—if the issue persists, the code will return. Designed for DIYers who want to understand what’s really going on under the hood.
- 【Easy Code Reading – Just Plug & Play】Simply plug into the OBD2 port, turn the ignition to “ON” (engine off), and select the correct menu: Select OBDII-> Wait for seconds-> Select Read codes. For accurate results, ensure your vehicle is compatible and the OBD2 port is free from damage or wiring issues. No batteries needed— powered directly by your car.
- 【Live Data Graphing & Accuracy for Most OBD2 Vehicles】View and log live sensor data in graph form—monitor oxygen sensors, fuel trims, coolant temp, RPM, and more. Spot trends and suspicious values in real time. Compatible with most 1996+ gasoline cars, light trucks, and SUVs sold in the U.S., as well as many 2000+ European and Asian models. Also works on 12V diesel vehicles equipped with OBD2.
- 【S-mog Check Helper – Know Your Readiness Status at a Glance】With dedicated I/M readiness hotkeys and a simple Red-Yellow-Green LED indicator, you’ll instantly know if your vehicle is ready for em-issions testing. Built-in speaker provides audio feedback. No guesswork—just confidence before you head to the test center.
- 【A Must-Have Tool for Every Home Mechanic】Compact, rugged, and ready to use right out of the box. The 2.8” color screen is easy to read, even in daylight. No charging or setup required—just plug into the 16-pin DLC and start diagnosing. Recommended by professional mechanics on YouTube and trusted by DIYers worldwide.
Last update on 2026-03-28 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.