NHTSA ID Number: 11718646
Complaint Date: 2026-02-17
Fail Date: 2026-02-15
Manufacturer Name: Ford Motor Company
Vehicle Make: FORD
Vehicle Model: F-150
Model Year: 2021
Summary
Led Daytime running lights burnout. No repair by ford without replacing whole housing. No covered under warranty.
Read More...NHTSA ID Number: 11718645
Complaint Date: 2026-02-17
Fail Date: 2026-01-29
Manufacturer Name: Nissan North America, Inc.
Vehicle Make: NISSAN
Vehicle Model: SENTRA
Model Year: 2019
Summary
Drivers side Door Lock Actuator could not open the door from the inside handle or outside handle. In 2025 I replaced the part, Feb 2026 had to take the car to the dealership because could not open the door again. Dealership told me the Actuator failed internally. The part was only looked at by the dealership. There were no warning lamp, messages or other symptoms of the problem prior to the failure.
Read More...NHTSA ID Number: 11718644
Complaint Date: 2026-02-17
Fail Date: 2026-01-28
Manufacturer Name: Honda (American Honda Motor Co.)
Vehicle Make: HONDA
Vehicle Model: ACCORD
Model Year: 2017
Summary
The camera failed on the car rendering all the safety features inoperable. The camera cost almost $2000 making it an expensive repair.
Read More...NHTSA ID Number: 11718643
Complaint Date: 2026-02-17
Fail Date: 2026-02-08
Manufacturer Name: General Motors, LLC
Vehicle Make: CADILLAC
Vehicle Model: CT5
Model Year: 2026
Summary
Catastrophic engine failure within 700 miles Requires full engine replacement Problems began around 150 miles on odometer Message: Reduced accelerated speed Check engine light Service transmission system Service variable valve timing system
Read More...NHTSA ID Number: 11718642
Complaint Date: 2026-02-17
Fail Date: 2026-02-17
Manufacturer Name: Ford Motor Company
Vehicle Make: FORD
Vehicle Model: F-350
Model Year: 2020
Summary
A component has not yet failed but an existing recall (Ford recall 24S78 / NHTSA ID 24V957) describes the potential for loss of motive power increasing the risk of a crash. This recall was issued in December of 2024. I received a notice in January of 2026 that the repair was available, went to my local dealer and was told the recall had been paused on 02/03/2026 - no actual repair is currently available. I live full-time in my 2021, 20,000 lb., 5th-wheel RV and frequently tow it with no other option than my 2020 F350 with the open recall. To quote the recall document, "Ford has not issued instructions to stop driving your vehicle under this safety recall" but a loss of motive power is exponentially worse when towing a large load which is what this vehicle was purpose-built to do.
Read More...NHTSA ID Number: 11718641
Complaint Date: 2026-02-17
Fail Date: 2026-02-06
Manufacturer Name: Hyundai Motor America
Vehicle Make: HYUNDAI
Vehicle Model: SONATA
Model Year: 2015
Summary
Component/System Failed: Engine – connecting rod bearing failure consistent with Hyundai Theta II engine defect subject to federal recalls and Consent Orders. The vehicle previously received Recall Campaign 953 (KSDS software update), intended to detect premature rod bearing wear. The engine is currently knocking and has been diagnosed as requiring replacement. The vehicle and engine are available for inspection upon request. Safety Risk: Rod bearing failure can cause sudden engine seizure or stall while driving, creating a significant crash risk due to loss of power steering and braking assist. Engine failure DID occurr despite prior recall software update, indicating potential recall remedy ineffectiveness. Sudden stalling in traffic placed myself and others at risk of collision. Dealer Confirmation: Hyundai of North Charleston confirmed through warranty history a prior engine replacement request (PA) was submitted by a previous owner but denied. The recall repair was never performed. Current diagnostic findings indicate engine failure consistent with known recall defect. However, Hyundai has refused to perform further inspection or goodwill repair solely due to the vehicle’s salvage branding. Inspection History: The vehicle has been inspected by a Hyundai dealership. No engine replacement was completed. Hyundai Customer Care has updated case notes but is declining remedy based on title status rather than mechanical condition. Warning Lamps/Symptoms: The vehicle previously received KSDS software update. Engine knocking developed consistent with rod bearing wear. The software did not provide effective prevention of engine failure. The engine now requires replacement. Hyundai is refusing recall-related remedy due to salvage title (predates my wonder ship by many years), despite federal recall obligations applying to the vehicle VIN. This complaint concerns potential failure of recall remedy effectiveness and denial of defect-related inspection.
Read More...NHTSA ID Number: 11718640
Complaint Date: 2026-02-17
Fail Date: 2026-02-16
Manufacturer Name: General Motors, LLC
Vehicle Make: BUICK
Vehicle Model: ENCORE GX
Model Year: 2020
Summary
2020 Buick Encore GX; pulling out of a service station, my check engine light illuminated, and message on cluster stated: Engine Power Reduced. I loss throttle response for accelerating. Accelerator pedal was pushed to the floor and no acceleration. Vehicle entered limp mode. Drove 15 miles from service station to my home, in limp mode, unable to accelerate. Called a technician mechanic who check for Diagnostic Trouble Codes; DTC P0299 Turbocharge/Supercharge "A" Under boost condition; is Confirmed, Pending, and Permanent code. Loss of power to Power Train, unable to accelerate.
Read More...NHTSA ID Number: 11718639
Complaint Date: 2026-02-17
Fail Date: 2026-02-17
Manufacturer Name: Honda (American Honda Motor Co.)
Vehicle Make: ACURA
Vehicle Model: RDX
Model Year: 2019
Summary
the back window shattered by itself
Read More...NHTSA ID Number: 11718638
Complaint Date: 2026-02-17
Fail Date: 2025-06-17
Manufacturer Name: Chrysler (FCA US, LLC)
Vehicle Make: JEEP
Vehicle Model: CHEROKEE
Model Year: 2019
Summary
The contact owns a 2019 Jeep Cherokee. The contact received notification of NHTSA Campaign Number: 25V011000 (Power Train); however, the part to do the recall repair was not yet available. The local dealer was contacted and confirmed that the part was not yet available. The contact stated that while driving approximately 30 MPH, the vehicle lost automotive power. The check engine warning light was illuminated. The failure had occurred on several occasions. The vehicle was taken to a dealer, where it was confirmed that the part was not yet available. The vehicle was not diagnosed or repaired. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The failure mileage was approximately 140,000.
Read More...NHTSA ID Number: 11718637
Complaint Date: 2026-02-17
Fail Date: 2025-12-15
Manufacturer Name: General Motors, LLC
Vehicle Make: CADILLAC
Vehicle Model: XT5
Model Year: 2024
Summary
The contact owns a 2024 Cadillac XT5. The contact stated that while driving approximately 10 - 15 MPH and depressing the accelerator pedal, the vehicle failed to respond. There was an abnormal vibrating sound coming from the engine. A dealer was contacted. The vehicle was taken to the dealer, where it was diagnosed, and determined that the transmission needed to be replaced. The vehicle was not repaired. The manufacturer was notified of the failure, and informed the contact to return the vehicle to the dealer for more diagnostic testing, and a case was opened. The failure mileage was 23,000.
Read More...
- CEL Doctor: The ANCEL AD310 is one of the best-selling OBD II scanners on the market and is recommended by Scotty Kilmer, a YouTuber and auto mechanic. It can easily determine the cause of the check engine light coming on. After repairing the vehicle's problems, it can quickly read and clear diagnostic trouble codes of emission system, read live data & hard memory data, view freeze frame, I/M monitor readiness and collect vehicle information.
- Sturdy and Compact: Equipped with a 2.5 foot cable made of very thick, flexible insulation. It is important to have a sturdy scanner as it can easily fall to the ground when working in a car. The AD310 OBD2 scanner is a well-constructed mechanic tool with a sleek design. It weighs 12 ounces and measures 8.9 x 6.9 x 1.4 inches. Thanks to its compact design and light weight, transporting the device is not a problem. The buttons are clearly labelled and the screen is large and displays results clearly.
- Accurate Fast and Easy to Use: The AD310 scanner can help you or your mechanic understand if your car is in good condition, provides exceptionally accurate and fast results, reads and clears engine trouble emission codes in seconds after you fixed the problem. This device will let you know immediately and fix the problem right away without any car knowledge. No need for batteries or a charger, get power directly from the OBDII Data Link Connector in your vehicle.
- OBDII Protocols and Car Compatibility: Many cheap scan tools do not really support all OBD2 protocols. AD310 scanner as it can support all OBDII protocols such as KWP2000, J1850 VPW, ISO9141, J1850 PWM and CAN. This device also has extensive vehicle compatibility with 1996 US-based, 2000 EU-based and Asian cars, light trucks, SUVs, as well as newer OBD2 and CAN vehicles both domestic and foreign. Pls confirm with our customer service whether it is compatible with your vehicle before purchasing.
- Home Necessity and Worthy to Own: This is an excellent code reader to travel or home with as it weighs less and it is compact in design. You can easily slide it in your backpack as you head to the garage, or put it on the dashboard, this will be a great fit for you. The AD310 is not only portable, but also accurate and fast in performance. Moreover, it covers various car brands and is suitable for people who just need a code reader to check their car.
- Multi-Functions - Practical Multi-Functions OBD2 code reader features built-in OBD2 DTC lookup library, which help you to determine the cause of the engine light, read code, erase code, view freeze frame, I/M ready, vehicle information, data flow, real-time curve, get vehicle speed information, calculate load value, engine coolant temperature, get engine speed.
- Wide Capability - Supports 9 protocols compatible with most 1996 US-Based, 2000 EU-Based and Asian cars, and newer OBD II & CAN domestic or import vehicles. Supports 6 languages - English,German, Dutch, Spanish, French, Italian.
- 2.8" LCD Display - Designed with a clear display 2.8" Large LCD screen - white backlight and contrast adjustment. No need any battery or charger, OBD reader gets the power directly from your vehicle through the OBDII Data Link Connector.
- Compact Design - Car diagnostic scanner is equipped with a 2.5 feet long cable and made of a very thick flexible insulator.There are 6 buttons on OBD2 Scanner:scroll up/down,enter/exit and buttons that quick query VIN vehicle number& the DTC fault code.
- ABS / Airbag codes NOT Supported - It is able to read and clear check engine information which is part of OBDII system, but it cannot work with non-OBDII systems, including ABS / Airbag / Oil Service Light, etc.
- 【Your Personal CEL Doctor – Read & Clear Engine Codes】The NT301 OBD2 scanner lets you read diagnostic trouble codes (DTCs), check em-issions readiness, turn off your Check Engine Light (CEL) or MIL, reset monitors, and view live data streams. It retrieves your vehicle's VIN instantly. Like all standard OBD2 scanners, it clears codes only after repairs are completed—if the issue persists, the code will return. Designed for DIYers who want to understand what’s really going on under the hood.
- 【Easy Code Reading – Just Plug & Play】Simply plug into the OBD2 port, turn the ignition to “ON” (engine off), and select the correct menu: Select OBDII-> Wait for seconds-> Select Read codes. For accurate results, ensure your vehicle is compatible and the OBD2 port is free from damage or wiring issues. No batteries needed— powered directly by your car.
- 【Live Data Graphing & Accuracy for Most OBD2 Vehicles】View and log live sensor data in graph form—monitor oxygen sensors, fuel trims, coolant temp, RPM, and more. Spot trends and suspicious values in real time. Compatible with most 1996+ gasoline cars, light trucks, and SUVs sold in the U.S., as well as many 2000+ European and Asian models. Also works on 12V diesel vehicles equipped with OBD2.
- 【S-mog Check Helper – Know Your Readiness Status at a Glance】With dedicated I/M readiness hotkeys and a simple Red-Yellow-Green LED indicator, you’ll instantly know if your vehicle is ready for em-issions testing. Built-in speaker provides audio feedback. No guesswork—just confidence before you head to the test center.
- 【A Must-Have Tool for Every Home Mechanic】Compact, rugged, and ready to use right out of the box. The 2.8” color screen is easy to read, even in daylight. No charging or setup required—just plug into the 16-pin DLC and start diagnosing. Recommended by professional mechanics on YouTube and trusted by DIYers worldwide.
Last update on 2026-03-29 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.