NHTSA ID Number: 11718666
Complaint Date: 2026-02-17
Fail Date: 2024-06-01
Manufacturer Name: Jaguar Land Rover North America, LLC
Vehicle Make: LAND ROVER
Vehicle Model: RANGE ROVER SPORT
Model Year: 2019
Summary
The infotainment system system that controls the AC RADIO DEFROST HEATED SEATS, SETTINGS, DRIVEABILITY SETTINGS does not turn on. This is my wifes car and she has to drive sometimes with no defrost while its raining and not AC/Heat control while the weather is cold or super hot in LA. The problem has been diagnosed by the dealer and there has been a recall issued for this specific recall, just not for my vin number. So Land Rover Corporate refuses to fix it or provide any financial help. The car has 45,000miles and we are the original owner. I believe our vin should also be included in the recall of the Land over Sport Infotainment system. I believe our model was not included because it was a diesel and not many range rover sport diesels are in the States,.
Read More...NHTSA ID Number: 11718665
Complaint Date: 2026-02-17
Fail Date: 2026-02-16
Manufacturer Name: Kia America, Inc.
Vehicle Make: KIA
Vehicle Model: SORENTO
Model Year: 2018
Summary
My speedometer was jumping from 0 to 20 mph while in park. A couple weeks later it did it while I was driving, I was going 25 mph and it jumped to 55 mph. I took it to the shop that day and all 4 of my wheel speed sensors were out, which wasn’t accurately measuring my speed. The shop said it was common with this model and year. Also, my headlights do not work in auto mode. I will have shut my car off, made sure the lights were off, and hours later I have a text from my neighbors that my lights are on.
Read More...NHTSA ID Number: 11718664
Complaint Date: 2026-02-17
Fail Date: 2026-02-01
Manufacturer Name: Toyota Motor Corporation
Vehicle Make: TOYOTA
Vehicle Model: SIENNA
Model Year: 2017
Summary
The transmission started making a whining sound. There is a Toyota customer support bulletin pol19-04 that mentions this issue however the dealer says this car is not covered
Read More...NHTSA ID Number: 11718663
Complaint Date: 2026-02-17
Fail Date: 2026-02-13
Manufacturer Name: Honda (American Honda Motor Co.)
Vehicle Make: HONDA
Vehicle Model: ACCORD
Model Year: 2023
Summary
It is my understanding Honda issued a extended warranty on the air conditioning condenser for its Accord models from 2018-2022. I have a 2023 Accord and the exact same issue has happened on my car. Similar to the earlier problems with fuel pumps where a partial recall was extended to the same model built in later years, I am suggesting Honda needs to repeat the extended warranty to include 2023 models. I am bringing this issue to your attention in case others are having the same experience.
Read More...NHTSA ID Number: 11718662
Complaint Date: 2026-02-17
Fail Date: 2026-02-13
Manufacturer Name: General Motors, LLC
Vehicle Make: CHEVROLET
Vehicle Model: SILVERADO 1500
Model Year: 2021
Summary
P1098 engine coolant control valve Engine light comes on and truck says reduced power. Then went off. Back on again
Read More...NHTSA ID Number: 11718661
Complaint Date: 2026-02-17
Fail Date: 2026-02-17
Manufacturer Name: Jaguar Land Rover North America, LLC
Vehicle Make: LAND ROVER
Vehicle Model: RANGE ROVER SPORT
Model Year: 2012
Summary
Vehicle: 2012 Range Rover Sport Supercharged (VIN: [XXX] ) Recall Campaign: N623 / NHTSA 21V635 Incident Description: In October 2025 I had a recall repair done at Land Rover Annapolis. I picked up my vehicle from Land Rover Annapolis after the N623 Fuel Outlet Flange Recall was performed. Immediately after service, while driving in a live lane of traffic, the vehicle unexpectedly stalled, resulting in a complete loss of motive power. The dashboard fuel gauge falsely indicated 55 miles of remaining range, but the vehicle had actually run out of fuel. This indicates that the fuel sending unit/float assembly was improperly reinstalled or damaged during the recall service, creating a secondary safety defect. I figured it would calibrate and fix itself. When the dealer reached out after my service appointment I made them aware of the issue. No one contacted me. I contacted Land Rover corporate when it continued to happen and was told to bring it back to the certified repair location. The dealership took 16 mins to look at my vehicle and deem the engine bad. Give a ballpark quote of 20000 to 30000 dollars to replace the engine. Despite this life-safety event, the dealership refused to pull stored Diagnostic Trouble Codes (DTCs) and is attempting to deflect liability by blaming a pre-existing minor coolant leak that never triggered an overheat warning. I am reporting a failure of the recall remedy and requesting an investigation into the dealership's refusal to diagnose consequential damage (High-Pressure Fuel Pump failure) caused by the botched safety When I brought up the fact that they should have diagnosed the codes already he offered to have them run it for free tomorrow like he was doing me some kind of favor. When I said did I disagreed with the findings based on the fact that there was no evidence of it being the engine overheating due to cool it he replied that maybe I needed a second opinion and it needed to be off of their lot by Friday. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION AC
Read More...NHTSA ID Number: 11718660
Complaint Date: 2026-02-17
Fail Date: 2026-02-15
Manufacturer Name: Hyundai Motor America
Vehicle Make: HYUNDAI
Vehicle Model: SANTA FE SPORT
Model Year: 2016
Summary
The engine light started blinking and my car would not accelerate anymore. I took it to the mechanic immediately, who said that there was an engine recall. I contacted the dealership, but they cannot do an initial inspection for more than 2 months. It would likely take another 2-3 months after the inspection before the engine can be replaced. I called Hyundai and they confirmed that my vehicle should be covered under an extended warranty based on the service history and error code from my car (TXXI for the Theta 2 engine - knock sensor detection, code p1326). However, Hyundai will not provide any help until the vehicle is inspected by a dealership. The dealership completely refuses to look at my car as they are busy. I live on an island, so the only other Hyundai dealership is two hours away. They will not answer any of my calls. I'm expected to figure out how to commute to work alone for the next two months, but since I live in a rural area, there are no alternative transportation options. An independent mechanic confirmed and reproduced the issue. The car is unsafe to drive. The dealer will not inspect my component in a reasonable time frame, much less repair it despite the fact that it is covered under extended warranty. The car was driving normally prior to the issue, and I did not notice any problems until the engine light started blinking. I have the car available for inspection.
Read More...NHTSA ID Number: 11718659
Complaint Date: 2026-02-17
Fail Date: 2026-01-29
Manufacturer Name: Hyundai Motor America
Vehicle Make: HYUNDAI
Vehicle Model: SONATA
Model Year: 2015
Summary
This complaint concerns a repeat failure of both front CV axles on my 2015 Hyundai Sonata. The CV axles and boots were replaced by Gettel Hyundai of Charlotte County using OEM parts in November 2024. The same components failed again just 7,876 miles later in January 2026; requiring a second full replacement. A CV axle replaced with factory OEM parts by a certified Hyundai tech should not fail within 7,876 miles under normal driving conditions. This pattern of repeat failure indicates either * A defect in the OEM replacement parts supplied by Hyundai * An installation defect at the authorized dealership * An unresolved underlying mechanical condition that causes accelerated CV axle wear The rapid repeat failure represents a potential safety hazard. CV axle failure can result in sudden loss of drive power, difficulty controlling the vehicle, and in severe cases, wheel separation --all of which create dangerous conditions for the driver and others on the road. Chronological Timeline of Events: Nov 5, 2024 55,579 miles; both front CV axles replaced by authorized Hyundai dealership using OEM parts. Labor and parts performed per Hyundai standards. Jan 29, 2026 63,451 miles Same CV axles failed again. Second replacement performed at same authorized Hyundai dealership. Total repair cost $3227.16 paid out of pocket by me. Feb 16, 2026 Hyundai Motor America denied goodwill reimbursement request (Case #XXX), citing the malfunction being out of time in service of the vehicle. Reported to Hyundai Motor, their response did not address the repeated nature of failure, the short mileage interval, or the possibility of a defective OEM part or improper installation. I believe the NHTSA should be aware of this pattern and investigate other 2015 Hyundai Sonata owners have reported similar rapid repeat CV axle failures, which could indicate a systemic defect in either OEM parts or dealership repair procedures. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
Read More...NHTSA ID Number: 11718658
Complaint Date: 2026-02-17
Fail Date: 2026-02-03
Manufacturer Name: Hyundai Motor America
Vehicle Make: HYUNDAI
Vehicle Model: IONIQ 5
Model Year: 2024
Summary
ICCU failure
Read More...NHTSA ID Number: 11718657
Complaint Date: 2026-02-17
Fail Date: 2025-11-28
Manufacturer Name: Ford Motor Company
Vehicle Make: FORD
Vehicle Model: EXPLORER
Model Year: 2021
Summary
The parking collision sensors started to act up. Its been replaced 3 or 4 times in the last year over the same problem and no one has tried to tell me how to fix the issue besides keep getting it replaced. People are at risk of getting hit or hitting a object that could be in the way of me reversing.
Read More...
- CEL Doctor: The ANCEL AD310 is one of the best-selling OBD II scanners on the market and is recommended by Scotty Kilmer, a YouTuber and auto mechanic. It can easily determine the cause of the check engine light coming on. After repairing the vehicle's problems, it can quickly read and clear diagnostic trouble codes of emission system, read live data & hard memory data, view freeze frame, I/M monitor readiness and collect vehicle information.
- Sturdy and Compact: Equipped with a 2.5 foot cable made of very thick, flexible insulation. It is important to have a sturdy scanner as it can easily fall to the ground when working in a car. The AD310 OBD2 scanner is a well-constructed mechanic tool with a sleek design. It weighs 12 ounces and measures 8.9 x 6.9 x 1.4 inches. Thanks to its compact design and light weight, transporting the device is not a problem. The buttons are clearly labelled and the screen is large and displays results clearly.
- Accurate Fast and Easy to Use: The AD310 scanner can help you or your mechanic understand if your car is in good condition, provides exceptionally accurate and fast results, reads and clears engine trouble emission codes in seconds after you fixed the problem. This device will let you know immediately and fix the problem right away without any car knowledge. No need for batteries or a charger, get power directly from the OBDII Data Link Connector in your vehicle.
- OBDII Protocols and Car Compatibility: Many cheap scan tools do not really support all OBD2 protocols. AD310 scanner as it can support all OBDII protocols such as KWP2000, J1850 VPW, ISO9141, J1850 PWM and CAN. This device also has extensive vehicle compatibility with 1996 US-based, 2000 EU-based and Asian cars, light trucks, SUVs, as well as newer OBD2 and CAN vehicles both domestic and foreign. Pls confirm with our customer service whether it is compatible with your vehicle before purchasing.
- Home Necessity and Worthy to Own: This is an excellent code reader to travel or home with as it weighs less and it is compact in design. You can easily slide it in your backpack as you head to the garage, or put it on the dashboard, this will be a great fit for you. The AD310 is not only portable, but also accurate and fast in performance. Moreover, it covers various car brands and is suitable for people who just need a code reader to check their car.
- Multi-Functions - Practical Multi-Functions OBD2 code reader features built-in OBD2 DTC lookup library, which help you to determine the cause of the engine light, read code, erase code, view freeze frame, I/M ready, vehicle information, data flow, real-time curve, get vehicle speed information, calculate load value, engine coolant temperature, get engine speed.
- Wide Capability - Supports 9 protocols compatible with most 1996 US-Based, 2000 EU-Based and Asian cars, and newer OBD II & CAN domestic or import vehicles. Supports 6 languages - English,German, Dutch, Spanish, French, Italian.
- 2.8" LCD Display - Designed with a clear display 2.8" Large LCD screen - white backlight and contrast adjustment. No need any battery or charger, OBD reader gets the power directly from your vehicle through the OBDII Data Link Connector.
- Compact Design - Car diagnostic scanner is equipped with a 2.5 feet long cable and made of a very thick flexible insulator.There are 6 buttons on OBD2 Scanner:scroll up/down,enter/exit and buttons that quick query VIN vehicle number& the DTC fault code.
- ABS / Airbag codes NOT Supported - It is able to read and clear check engine information which is part of OBDII system, but it cannot work with non-OBDII systems, including ABS / Airbag / Oil Service Light, etc.
- 【Your Personal CEL Doctor – Read & Clear Engine Codes】The NT301 OBD2 scanner lets you read diagnostic trouble codes (DTCs), check em-issions readiness, turn off your Check Engine Light (CEL) or MIL, reset monitors, and view live data streams. It retrieves your vehicle's VIN instantly. Like all standard OBD2 scanners, it clears codes only after repairs are completed—if the issue persists, the code will return. Designed for DIYers who want to understand what’s really going on under the hood.
- 【Easy Code Reading – Just Plug & Play】Simply plug into the OBD2 port, turn the ignition to “ON” (engine off), and select the correct menu: Select OBDII-> Wait for seconds-> Select Read codes. For accurate results, ensure your vehicle is compatible and the OBD2 port is free from damage or wiring issues. No batteries needed— powered directly by your car.
- 【Live Data Graphing & Accuracy for Most OBD2 Vehicles】View and log live sensor data in graph form—monitor oxygen sensors, fuel trims, coolant temp, RPM, and more. Spot trends and suspicious values in real time. Compatible with most 1996+ gasoline cars, light trucks, and SUVs sold in the U.S., as well as many 2000+ European and Asian models. Also works on 12V diesel vehicles equipped with OBD2.
- 【S-mog Check Helper – Know Your Readiness Status at a Glance】With dedicated I/M readiness hotkeys and a simple Red-Yellow-Green LED indicator, you’ll instantly know if your vehicle is ready for em-issions testing. Built-in speaker provides audio feedback. No guesswork—just confidence before you head to the test center.
- 【A Must-Have Tool for Every Home Mechanic】Compact, rugged, and ready to use right out of the box. The 2.8” color screen is easy to read, even in daylight. No charging or setup required—just plug into the 16-pin DLC and start diagnosing. Recommended by professional mechanics on YouTube and trusted by DIYers worldwide.
Last update on 2026-03-29 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.