NHTSA ID Number: 11720615
Complaint Date: 2026-02-26
Fail Date: 2024-09-02
Manufacturer Name: Nissan North America, Inc.
Vehicle Make: NISSAN
Vehicle Model: ROGUE
Model Year: 2009
Summary
I have a 2009 Nissan Rogue and a couple years ago the passenger airbag sensor indication on the dash continually flashes and the airbag light shows it is turned off. After a lot of research it looks like this has been a problem in 2008 and 2010 Nissan Rogues and a recall was issued. The same airbags and sensors were used in the 2009 but no recall. This could be catastrophic if the vehicle was in an accident and the airbag did not deploy.
Read More...NHTSA ID Number: 11720611
Complaint Date: 2026-02-26
Fail Date: 2026-01-23
Manufacturer Name: General Motors, LLC
Vehicle Make: CHEVROLET
Vehicle Model: SILVERADO 1500
Model Year: 2021
Summary
On a very cold day in January I left work to head home in 4-high. Just before I got on the highway, the truck did a hard shift from 1st to 2nd and I felt kind of a clunk. Truck immediately threw a check engine light and went into limp mode (didn't seem to shift at all). Pulled into a parking lot and tried to go in reverse, but truck would not go into reverse. Truck was towed to local dealership where they diagnosed it with a failed valve body on the transmission. Dealership told me the valve body was on back order so I then towed the truck to a local transmission shop who changed out the valve body. Transmission had no issues before this. The morning this happened it was very cold (below zero) and I got a message in the truck that said, "heater performance mode active". Thought that was weird, but dealer did not seem to think it had anything to do with the failure.
Read More...NHTSA ID Number: 11720610
Complaint Date: 2026-02-26
Fail Date: 2026-02-26
Manufacturer Name: General Motors, LLC
Vehicle Make: CHEVROLET
Vehicle Model: SILVERADO 1500
Model Year: 2022
Summary
The truck is jumpy during stops. I get a low voltage code but the battery is fine I had it checked out. Reduced acceleration has been activated and after I turn the truck off it is fine. The check engine light comes on and turns off on it's on sometimes same day. I know there is a recall on certain 2022 Silverados but they told me this one wasn't on the recall. It did have one for the brake system they said.
Read More...NHTSA ID Number: 11720607
Complaint Date: 2026-02-26
Fail Date: 2026-02-09
Manufacturer Name: Continental Tire the Americas, LLC
Vehicle Make: CONTINENTAL
Vehicle Model: CONTI HYBRID HD3
Model Year: 9999
Summary
Technician was airing the tires - zipper ruputer occured on the inside of the tire. 225/70R19.5
Read More...NHTSA ID Number: 11720606
Complaint Date: 2026-02-26
Fail Date: 2026-02-26
Manufacturer Name: Honda (American Honda Motor Co.)
Vehicle Make: HONDA
Vehicle Model: ACCORD
Model Year: 2019
Summary
The contact owns a 2019 Honda Accord. The contact stated that while starting the vehicle, there was a choking sound coming from the vehicle, and brake pedal went to the floorboard. The vehicle was turned off and while restarting the vehicle, the Lane Departure, TPMS, Brake System, Brake Hose, Brake Performance Reduced, and other warning lights were illuminated. The contact was able to drive the vehicle. The vehicle was not taken to a dealer or independent mechanic to be diagnosed or repaired. The manufacturer was not informed of the failure. The failure mileage was unavailable.
Read More...NHTSA ID Number: 11720605
Complaint Date: 2026-02-26
Fail Date: 2024-11-28
Manufacturer Name: Nissan North America, Inc.
Vehicle Make: NISSAN
Vehicle Model: ROGUE
Model Year: 2016
Summary
Following up on original report: 11628730. The ignition key can be removed while the vehicle is in Drive, creating a serious risk of unintended vehicle rollaway, which could result in property damage, injury, or death. This occurs every time the vehicle is in Drive. Follow-Up Request: I have received no response to my original report. I am formally requesting that this issue be: Logged in NHTSA’s safety defect database Reviewed and investigated as a potential safety defect Addressed with a recall or safety advisory if the defect is confirmed Additional Information: No accidents have occurred yet, but the safety risk is high. I am willing to provide additional documentation or demonstration of the defect if required
Read More...NHTSA ID Number: 11720604
Complaint Date: 2026-02-26
Fail Date: 2025-11-19
Manufacturer Name: Ford Motor Company
Vehicle Make: FORD
Vehicle Model: ESCAPE
Model Year: 2020
Summary
My car shut down from a new engine block recall or mandate. Has been in the shop for four months with no eta on when it will be done. This is my only way of transportation.
Read More...NHTSA ID Number: 11720603
Complaint Date: 2026-02-26
Fail Date: 2026-02-23
Manufacturer Name: REV Recreation Group
Vehicle Make: HOLIDAY RAMBLER
Vehicle Model: NAUTICA
Model Year: 2021
Summary
Dash display is delaminating and the issue is slowly spreading across the display. At some point safety information will not be visible. Problem started with what looks like drops of water below the screen layer.
Read More...NHTSA ID Number: 11720602
Complaint Date: 2026-02-26
Fail Date: 2026-02-26
Manufacturer Name: Hyundai Motor America
Vehicle Make: HYUNDAI
Vehicle Model: KONA
Model Year: 2021
Summary
Was driving when the car seemed to lose power and would not accelerate and started shaking. Check engine light came on and got it read, the code indicated a misfire and other errors. There was no one local to fix it as we were out of town. So we replaced the plugs that were indicated and noticed how badly damaged they were. Vehicle started to drive better before stalling out again and replacing the rest of the plugs. Was able to get it home and seemed to be driving normally but then we noticed it has an oil leak now. We have to keep a religious check on the oil because of the amount leaking and the fact the car isn't giving us a low oil warning. We took it to the dealership and they said we needed a new engine and it was just outside the power train warranty. All of this occurred our 78,000-80,000 mile mark. The dealer would not even change the oil before of how bad the leak was. This car was for our teenage daughter and its not safe for anyone to drive. I believe the dealership knew this car had issues, we bought it pre-owned and have only had it 6 months.
Read More...NHTSA ID Number: 11720601
Complaint Date: 2026-02-26
Fail Date: 2025-10-09
Manufacturer Name: Nissan North America, Inc.
Vehicle Make: NISSAN
Vehicle Model: ROGUE
Model Year: 2023
Summary
I was driving my vehicle after dropping my son off at school and my back windshield exploded without warning. I was unsure what to do and there was nowhere to pull over. I drove home and called my local Nissan dealer who I was leasing the vehicle from and they said the repair would not be covered. I used a local windshield replacement company and paid out of pocket to have the windshield replaced.
Read More...- CEL Doctor: The ANCEL AD310 is one of the best-selling OBD II scanners on the market and is recommended by Scotty Kilmer, a YouTuber and auto mechanic. It can easily determine the cause of the check engine light coming on. After repairing the vehicle's problems, it can quickly read and clear diagnostic trouble codes of emission system, read live data & hard memory data, view freeze frame, I/M monitor readiness and collect vehicle information.
- Sturdy and Compact: Equipped with a 2.5 foot cable made of very thick, flexible insulation. It is important to have a sturdy scanner as it can easily fall to the ground when working in a car. The AD310 OBD2 scanner is a well-constructed mechanic tool with a sleek design. It weighs 12 ounces and measures 8.9 x 6.9 x 1.4 inches. Thanks to its compact design and light weight, transporting the device is not a problem. The buttons are clearly labelled and the screen is large and displays results clearly.
- Accurate Fast and Easy to Use: The AD310 scanner can help you or your mechanic understand if your car is in good condition, provides exceptionally accurate and fast results, reads and clears engine trouble emission codes in seconds after you fixed the problem. This device will let you know immediately and fix the problem right away without any car knowledge. No need for batteries or a charger, get power directly from the OBDII Data Link Connector in your vehicle.
- OBDII Protocols and Car Compatibility: Many cheap scan tools do not really support all OBD2 protocols. AD310 scanner as it can support all OBDII protocols such as KWP2000, J1850 VPW, ISO9141, J1850 PWM and CAN. This device also has extensive vehicle compatibility with 1996 US-based, 2000 EU-based and Asian cars, light trucks, SUVs, as well as newer OBD2 and CAN vehicles both domestic and foreign. Pls confirm with our customer service whether it is compatible with your vehicle before purchasing.
- Home Necessity and Worthy to Own: This is an excellent code reader to travel or home with as it weighs less and it is compact in design. You can easily slide it in your backpack as you head to the garage, or put it on the dashboard, this will be a great fit for you. The AD310 is not only portable, but also accurate and fast in performance. Moreover, it covers various car brands and is suitable for people who just need a code reader to check their car.
- Multi-Functions - Practical Multi-Functions OBD2 code reader features built-in OBD2 DTC lookup library, which help you to determine the cause of the engine light, read code, erase code, view freeze frame, I/M ready, vehicle information, data flow, real-time curve, get vehicle speed information, calculate load value, engine coolant temperature, get engine speed.
- Wide Capability - Supports 9 protocols compatible with most 1996 US-Based, 2000 EU-Based and Asian cars, and newer OBD II & CAN domestic or import vehicles. Supports 6 languages - English,German, Dutch, Spanish, French, Italian.
- 2.8" LCD Display - Designed with a clear display 2.8" Large LCD screen - white backlight and contrast adjustment. No need any battery or charger, OBD reader gets the power directly from your vehicle through the OBDII Data Link Connector.
- Compact Design - Car diagnostic scanner is equipped with a 2.5 feet long cable and made of a very thick flexible insulator.There are 6 buttons on OBD2 Scanner:scroll up/down,enter/exit and buttons that quick query VIN vehicle number& the DTC fault code.
- ABS / Airbag codes NOT Supported - It is able to read and clear check engine information which is part of OBDII system, but it cannot work with non-OBDII systems, including ABS / Airbag / Oil Service Light, etc.
- 【Your Personal CEL Doctor – Read & Clear Engine Codes】The NT301 OBD2 scanner lets you read diagnostic trouble codes (DTCs), check em-issions readiness, turn off your Check Engine Light (CEL) or MIL, reset monitors, and view live data streams. It retrieves your vehicle's VIN instantly. Like all standard OBD2 scanners, it clears codes only after repairs are completed—if the issue persists, the code will return. Designed for DIYers who want to understand what’s really going on under the hood.
- 【Easy Code Reading – Just Plug & Play】Simply plug into the OBD2 port, turn the ignition to “ON” (engine off), and select the correct menu: Select OBDII-> Wait for seconds-> Select Read codes. For accurate results, ensure your vehicle is compatible and the OBD2 port is free from damage or wiring issues. No batteries needed— powered directly by your car.
- 【Live Data Graphing & Accuracy for Most OBD2 Vehicles】View and log live sensor data in graph form—monitor oxygen sensors, fuel trims, coolant temp, RPM, and more. Spot trends and suspicious values in real time. Compatible with most 1996+ gasoline cars, light trucks, and SUVs sold in the U.S., as well as many 2000+ European and Asian models. Also works on 12V diesel vehicles equipped with OBD2.
- 【S-mog Check Helper – Know Your Readiness Status at a Glance】With dedicated I/M readiness hotkeys and a simple Red-Yellow-Green LED indicator, you’ll instantly know if your vehicle is ready for em-issions testing. Built-in speaker provides audio feedback. No guesswork—just confidence before you head to the test center.
- 【A Must-Have Tool for Every Home Mechanic】Compact, rugged, and ready to use right out of the box. The 2.8” color screen is easy to read, even in daylight. No charging or setup required—just plug into the 16-pin DLC and start diagnosing. Recommended by professional mechanics on YouTube and trusted by DIYers worldwide.
Last update on 2026-03-20 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.



