NHTSA ID Number: 11720417
Complaint Date: 2026-02-25
Fail Date: 2026-02-25
Manufacturer Name: General Motors, LLC
Vehicle Make: CHEVROLET
Vehicle Model: SONIC
Model Year: 2012
Summary
The contact owns a 2012 Chevrolet Sonic. The contact stated that on several occasions, while coming to a stop, the vehicle unexpectedly remained in second gear. There were no warning lights illuminated. The contact stated that several attempts were needed for the vehicle to shift into another gear. The dealer was not contacted. The vehicle was not diagnosed or repaired. The manufacturer was made aware of the failure and referred the contact to the NHTSA Hotline for additional assistance. The failure mileage was approximately 77,000.
Read More...NHTSA ID Number: 11720416
Complaint Date: 2026-02-25
Fail Date: 2026-02-22
Manufacturer Name: Kia America, Inc.
Vehicle Make: KIA
Vehicle Model: SOUL
Model Year: 2020
Summary
The contact owns a 2020 Kia Soul. The contact stated that while driving at an undisclosed speed, the vehicle failed to accelerate as needed. Additionally, the engine was leaking oil. The check engine warning light was illuminated. The contact stated that the vehicle was previously repaired under NHTSA Campaign Number: 21V259000 (Engine); however, the failure recurred. The contact's friend diagnosed the vehicle with a code reader and retrieved DTC: P0017, P0301, P0302, P0303, and P0304. The vehicle was not diagnosed or repaired by an independent mechanic or dealer. The manufacturer was not made aware of the failure. The failure mileage was approximately 92,000.
Read More...NHTSA ID Number: 11720415
Complaint Date: 2026-02-25
Fail Date: 2025-11-01
Manufacturer Name: Honda (American Honda Motor Co.)
Vehicle Make: HONDA
Vehicle Model: PROLOGUE
Model Year: 2025
Summary
After a 2K miles, clicking sounds began with CV joints. Clicking progressively getting louder and can be felt. This is a safety issue because these joints will ultimately fail. Honda states there is NO FIX to the issue. There are many many many owners who are experiencing this same issue.
Read More...NHTSA ID Number: 11720414
Complaint Date: 2026-02-25
Fail Date: 2026-01-14
Manufacturer Name: Toyota Motor Corporation
Vehicle Make: TOYOTA
Vehicle Model: SEQUOIA
Model Year: 2018
Summary
The contact owns a 2018 Toyota Sequoia. The contact stated that while attempting to start the vehicle, the vehicle failed to start. The contact stated that after several attempts, the vehicle started. While driving at an undisclosed speed, the vehicle drove abnormally rough. No warning lights were illuminated. The vehicle was not diagnosed or repaired by an independent mechanic or dealer. The contact referenced NHTSA Campaign Number: 20V012000 (Fuel System, Gasoline); however, the VIN was not associated with the recall. The manufacturer was made aware of the failure. The contact was advised to contact the NHTSA Hotline to report the failure. The failure mileage was approximately 154,000.
Read More...NHTSA ID Number: 11720413
Complaint Date: 2026-02-25
Fail Date: 2026-01-28
Manufacturer Name: Tesla, Inc.
Vehicle Make: TESLA
Vehicle Model: MODEL 3
Model Year: 2023
Summary
In autopilot mode on 1/28/26 the vehicle without any warnings went through a red light causing an accident. A week prior it failed to adjust speed in a 35 mile per hour zone maintaining 71.
Read More...NHTSA ID Number: 11720412
Complaint Date: 2026-02-25
Fail Date: 2026-02-04
Manufacturer Name: Honda (American Honda Motor Co.)
Vehicle Make: HONDA
Vehicle Model: ODYSSEY
Model Year: 2018
Summary
Before my vehicle reached the 100,000-mile mark, the check engine light began appearing intermittently. I brought the car to my local dealership multiple times, but they were unable to provide a diagnosis and repeatedly reset the light. Once the light remained on permanently, the dealer finally identified a known Honda recall/extended warranty issue and replaced the spark plugs at no cost. However, approximately six months after that repair, the check engine light returned. The dealership has now diagnosed a failure in both the front and rear catalytic converters at a cost of $5200 to replace them. I need to replace to pass my state of Illinois car emissions tests. I have been working with Honda Goodwill Assistance (Case #161-655-70), but their offer to cover only 20% of the replacement cost is unacceptable. This failure is not a standard "wear and tear" issue; it is a direct consequence of the spark plug issues I repeatedly attempted to address before my warranty expired. I was told the 20% determination was based on my vehicle exceeding 100,000 miles, but this fails to account for the fact that I brought the car in for this specific issue multiple times while it was still under warranty. I am looking for Honda corporate to acknoweldge the new spark plugs they directed my dealer to install caused this issue and cover the cost of the repairs. My local Honda dealer service manager, Brian, is willing to speak on this issue on my behalf. He can be reached at [XXX] . INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
Read More...NHTSA ID Number: 11720411
Complaint Date: 2026-02-25
Fail Date: 2026-02-07
Manufacturer Name: Chrysler (FCA US, LLC)
Vehicle Make: RAM
Vehicle Model: 1500
Model Year: 2015
Summary
The ABS module failed in June of 2025. Ram originally told me the part was on back order 6-8 months. In December they said there were 100 ABS modules on order for our area. In January 2026 they informed the mechanic that is doing the work that there is still parts on back order and it could be another 1-2 months. Today 2/25/26 the mechanic was told there are 265 modules on back order and it can be another 2-3 months. The truck now has a throttle body control issue that is stemming from the ABS issue. The truck is not operable at the moment because of this back order. I have been waiting for 7 months for this part and there are no alternatives on the market. If Ram does not get a part available for me I will either have to find a used one that hopefully isn't going to fail or be out of a $50,000 truck. This is a problem that many people have had according to all of the RAM forums. RAM needs to find a solution because the consumer already paid for the vehicle so parts should be available.
Read More...NHTSA ID Number: 11720410
Complaint Date: 2026-02-25
Fail Date: 2025-08-20
Manufacturer Name: Ford Motor Company
Vehicle Make: FORD
Vehicle Model: EDGE
Model Year: 2015
Summary
I’m wanting to report the open recalls on my vehicle. I feel like there has been plenty of time to accommodate for these parts needed for my vehicle. The camera glitched for the first time on me about 6 months ago as I was using it to back up and the glitch caused me to back up into a pole that I didn’t see. I was unable to stop fast enough before I hit the pole as it was glitching. I need these parts from these 2 recalls fixed as soon as possible. Especially if my brakes can go out at any minute. I cannot afford to pay out of pocket for these. Thank you
Read More...NHTSA ID Number: 11720409
Complaint Date: 2026-02-25
Fail Date: 2026-02-21
Manufacturer Name: General Motors, LLC
Vehicle Make: GMC
Vehicle Model: SIERRA 1500
Model Year: 2015
Summary
I remote started my truck, and when I got to it there was smoke and a flame coming from the rear power window. The remote start activates the rear defrosters, which started the electrical issues. I shut off the engine, and a loud pop followed, which was the shattering of the driver side rear window. The flame went out, and could have easily ignited the tarp covering the truck bed. There were no warnings on the console for the issue, and no recalls available. I have seen similar recall, but in a different state and back in 2022. This leaves me with a shattered window in the back, which is unsafe for visibility, and a bill to pay due to manufacturing errors for a feature in the truck. The rear window is all melted, and the glass is chipping away.
Read More...NHTSA ID Number: 11720408
Complaint Date: 2026-02-25
Fail Date: 2026-02-17
Manufacturer Name: Chrysler (FCA US, LLC)
Vehicle Make: JEEP
Vehicle Model: GRAND CHEROKEE L
Model Year: 2021
Summary
I was driving my vehicle home after a nearby out of town errand. I was on US-95 between Potlatch ID and Moscow ID which is a very hilly, curvy 2-lane 60mph highway with little to no cell service. As I ascended my first big hill, my engine light came on flashing and the ride became noticeably bumpy. I could not call anyone for many miles yet, so I put on my safety hazards and continued driving, hoping to make it to town. With each hill my car became more unstable and seemed to be struggling to accelerate. Once I had cell service just outside of Moscow I called my husband to tell him what was happening, where I was at and proceeded to head to an auto repair shop. Once I drove into Moscow, my car was incredibly shaky and noisy and the engine seemed to struggle to stay engaged at stop lights. I brought it to Hive auto repair and they told me that my engine was misfiring, but that they would run a level 1 diagnostic that day. When they called with the results, they confirmed the following information: Scanned for DTCs and found P0301 - Cylinder 1 Misfire Detected. On this 3.6L engine, Cylinder 1 is located beneath the intake manifold, requiring intake removal for further access and testing.-- I continued to level 2 inspection and removal of the manifold which showed significant problems within the engine at Cylinder Head 1. There was oil intrusion and low compression, consistent with warping of the head. They said that this was a known issue with this engine on Stellantis vehicles because of an EGR valve on cylinder 1 2018/2022. Even though I had my Jeep regularly serviced at McGee Jeep in Barre VT, they never tested for this because it wasn't recommended or in the scheduled maintenance. But when I spoke with them they confirmed this is a known issue. I understand it is a severe, dangerous and expensive repair, but usually occurs after the warranty expires. I now have an unsafe, undriveable vehicle with a $14k repair pending.
Read More...
- CEL Doctor: The ANCEL AD310 is one of the best-selling OBD II scanners on the market and is recommended by Scotty Kilmer, a YouTuber and auto mechanic. It can easily determine the cause of the check engine light coming on. After repairing the vehicle's problems, it can quickly read and clear diagnostic trouble codes of emission system, read live data & hard memory data, view freeze frame, I/M monitor readiness and collect vehicle information.
- Sturdy and Compact: Equipped with a 2.5 foot cable made of very thick, flexible insulation. It is important to have a sturdy scanner as it can easily fall to the ground when working in a car. The AD310 OBD2 scanner is a well-constructed mechanic tool with a sleek design. It weighs 12 ounces and measures 8.9 x 6.9 x 1.4 inches. Thanks to its compact design and light weight, transporting the device is not a problem. The buttons are clearly labelled and the screen is large and displays results clearly.
- Accurate Fast and Easy to Use: The AD310 scanner can help you or your mechanic understand if your car is in good condition, provides exceptionally accurate and fast results, reads and clears engine trouble emission codes in seconds after you fixed the problem. This device will let you know immediately and fix the problem right away without any car knowledge. No need for batteries or a charger, get power directly from the OBDII Data Link Connector in your vehicle.
- OBDII Protocols and Car Compatibility: Many cheap scan tools do not really support all OBD2 protocols. AD310 scanner as it can support all OBDII protocols such as KWP2000, J1850 VPW, ISO9141, J1850 PWM and CAN. This device also has extensive vehicle compatibility with 1996 US-based, 2000 EU-based and Asian cars, light trucks, SUVs, as well as newer OBD2 and CAN vehicles both domestic and foreign. Pls confirm with our customer service whether it is compatible with your vehicle before purchasing.
- Home Necessity and Worthy to Own: This is an excellent code reader to travel or home with as it weighs less and it is compact in design. You can easily slide it in your backpack as you head to the garage, or put it on the dashboard, this will be a great fit for you. The AD310 is not only portable, but also accurate and fast in performance. Moreover, it covers various car brands and is suitable for people who just need a code reader to check their car.
- Multi-Functions - Practical Multi-Functions OBD2 code reader features built-in OBD2 DTC lookup library, which help you to determine the cause of the engine light, read code, erase code, view freeze frame, I/M ready, vehicle information, data flow, real-time curve, get vehicle speed information, calculate load value, engine coolant temperature, get engine speed.
- Wide Capability - Supports 9 protocols compatible with most 1996 US-Based, 2000 EU-Based and Asian cars, and newer OBD II & CAN domestic or import vehicles. Supports 6 languages - English,German, Dutch, Spanish, French, Italian.
- 2.8" LCD Display - Designed with a clear display 2.8" Large LCD screen - white backlight and contrast adjustment. No need any battery or charger, OBD reader gets the power directly from your vehicle through the OBDII Data Link Connector.
- Compact Design - Car diagnostic scanner is equipped with a 2.5 feet long cable and made of a very thick flexible insulator.There are 6 buttons on OBD2 Scanner:scroll up/down,enter/exit and buttons that quick query VIN vehicle number& the DTC fault code.
- ABS / Airbag codes NOT Supported - It is able to read and clear check engine information which is part of OBDII system, but it cannot work with non-OBDII systems, including ABS / Airbag / Oil Service Light, etc.
- 【Your Personal CEL Doctor – Read & Clear Engine Codes】The NT301 OBD2 scanner lets you read diagnostic trouble codes (DTCs), check em-issions readiness, turn off your Check Engine Light (CEL) or MIL, reset monitors, and view live data streams. It retrieves your vehicle's VIN instantly. Like all standard OBD2 scanners, it clears codes only after repairs are completed—if the issue persists, the code will return. Designed for DIYers who want to understand what’s really going on under the hood.
- 【Easy Code Reading – Just Plug & Play】Simply plug into the OBD2 port, turn the ignition to “ON” (engine off), and select the correct menu: Select OBDII-> Wait for seconds-> Select Read codes. For accurate results, ensure your vehicle is compatible and the OBD2 port is free from damage or wiring issues. No batteries needed— powered directly by your car.
- 【Live Data Graphing & Accuracy for Most OBD2 Vehicles】View and log live sensor data in graph form—monitor oxygen sensors, fuel trims, coolant temp, RPM, and more. Spot trends and suspicious values in real time. Compatible with most 1996+ gasoline cars, light trucks, and SUVs sold in the U.S., as well as many 2000+ European and Asian models. Also works on 12V diesel vehicles equipped with OBD2.
- 【S-mog Check Helper – Know Your Readiness Status at a Glance】With dedicated I/M readiness hotkeys and a simple Red-Yellow-Green LED indicator, you’ll instantly know if your vehicle is ready for em-issions testing. Built-in speaker provides audio feedback. No guesswork—just confidence before you head to the test center.
- 【A Must-Have Tool for Every Home Mechanic】Compact, rugged, and ready to use right out of the box. The 2.8” color screen is easy to read, even in daylight. No charging or setup required—just plug into the 16-pin DLC and start diagnosing. Recommended by professional mechanics on YouTube and trusted by DIYers worldwide.
Last update on 2026-03-23 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.