NHTSA ID Number: 11720437
Complaint Date: 2026-02-25
Fail Date: 2026-01-15
Manufacturer Name: General Motors, LLC
Vehicle Make: GMC
Vehicle Model: CANYON
Model Year: 2023
Summary
The upper radiator hose on some huge percentage of these trucks fail (mine has failed at just over 37K miles). You can check the Colorado Chevy and GMC Canyon forums, youtube, Facebook, etc., et al, and find plenty of instances where this has failed. As this is the cooling system, it can cause the engine to overheat and potentially ruin the engine. The flaw seems to be an engineering issue with the rubber seal they use (instead of a high quality o-ring) to seal the upper hose to the radiator. Additionally, since this can cause engine failure it should be addressed immediately. Instead, my local Chevy dealer, since its not a recall item, said they could schedule a time next week for me to LEAVE the truck and that I am responsible for the repair. This is extremely unfair to the consumer who depends on these vehicles. This should absolutely be a recall item. You can find 1000's of examples online and if you can pull GM repair data, I'm sure you'll find 1000's more.
Read More...NHTSA ID Number: 11720436
Complaint Date: 2026-02-25
Fail Date: 2025-12-17
Manufacturer Name: Nissan North America, Inc.
Vehicle Make: NISSAN
Vehicle Model: PATHFINDER
Model Year: 2014
Summary
The contact owns a 2014 Nissan Pathfinder. The contact stated that while attempting to accelerate after a stop, the vehicle jolted while the accelerator pedal was depressed. The check engine warning light was illuminated. The contact was able to restart the vehicle, and the vehicle was taken to a local independent mechanic, where it was diagnosed with transmission failure. The local dealer was contacted; however, the vehicle was not diagnosed or repaired due to the cost. The manufacturer was not made aware of the failure. The failure mileage was approximately 150,000.
Read More...NHTSA ID Number: 11720435
Complaint Date: 2026-02-25
Fail Date: 2026-02-20
Manufacturer Name: Ford Motor Company
Vehicle Make: FORD
Vehicle Model: ESCAPE
Model Year: 2023
Summary
I have had many issues with this vehicle. Most concerning is that the other night while driving down the road at night, my car blacked out and I had no lights inside or headlights outside while driving in the dark. My back hatch button only works when it wants to. My screen freezes every once in awhile and also makes horrible noises very frequently. I’ve had one case of my screen freezing on a longer drive with my seat warmer on and the seats getting too hot and burning me. My safety features shut off all the time. My cruise control wouldn’t work at all on a 4 hour drive last month. When I get my oil changed they tell me under my hood is way louder than it should be for a vehicle this old. The dealership did a factory reset hoping it would help but I’ve already had issues with the hatch door not working appropriately, the sound coming from my screen, and notifications that my safety features have been shut off.
Read More...NHTSA ID Number: 11720434
Complaint Date: 2026-02-25
Fail Date: 2026-02-25
Manufacturer Name: Ford Motor Company
Vehicle Make: FORD
Vehicle Model: F-150
Model Year: 2019
Summary
1) Vehicle transmission erratic shifting ,skips gear 2 and 4 a lot and sometimes from stop to 33 mph it seems to go into neutral then bang back into gear. Grand kids in back gets knocked around hard enough to lose food/drinks. It dose to back but now the truck is less than 10MPH. 2) On start up something in the engine jingle and gaggle sound for 1-3 seconds.. This happens when truck has been sitting for long period.
Read More...NHTSA ID Number: 11720433
Complaint Date: 2026-02-25
Fail Date: 2025-12-02
Manufacturer Name: Ford Motor Company
Vehicle Make: FORD
Vehicle Model: EXPLORER
Model Year: 2018
Summary
The contact owns a 2018 Ford Explorer. The contact stated that while driving 35 MPH over a bump on a snowy road, there was an abnormal popping sound coming from the rear suspension, and the contact lost control of the vehicle. The contact stated that upon decelerating to 5 MPH, the contact was able to regain control of the vehicle and to pulled over to the side of the road. The vehicle was towed to the residence. The contact noticed that the rear driver's side tire was folded inward. The vehicle was towed to an independent mechanic, where it was diagnosed, and determined that the driver's side rear suspension toe link was fractured and needed to be replaced. The contact stated that the part was replaced; however, the rear suspension was making an abnormal squeaking sound while driving. The vehicle was not repaired. The contact became aware that the VIN was recently included in NHTSA Campaign Number: 26V101000 (Suspension), which the contact associated with the failure. The dealer and the manufacturer were not contacted. The failure mileage was approximately 110,000.
Read More...NHTSA ID Number: 11720432
Complaint Date: 2026-02-25
Fail Date: 2026-02-23
Manufacturer Name: Hyundai Motor America
Vehicle Make: HYUNDAI
Vehicle Model: IONIQ 5
Model Year: 2024
Summary
a warning "Stop immediately! Check Power Source" with loud beeping occurred and we were able to pull over and park safely. However, we were a 30 minute drive from home and in a downtown urban area. Took the next day off of work (essential healthcare worker at a hospital) to have car towed to dealership. ICCU failure. Told it could take months for replacement part to be shipped. Given a loaner car. Concerned that Hyundai does not have a real solution for this problem and that I cannot ever drive the car far from home again without risking the same thing happening again.
Read More...NHTSA ID Number: 11720431
Complaint Date: 2026-02-25
Fail Date: 2026-02-22
Manufacturer Name: Honda (American Honda Motor Co.)
Vehicle Make: HONDA
Vehicle Model: ODYSSEY
Model Year: 2020
Summary
System is starting to fail by alerting me to clean windshield. Windshield and camera have been cleaned, still getting multiple warnings that system is shutting off safety features during my commutes.
Read More...NHTSA ID Number: 11720430
Complaint Date: 2026-02-25
Fail Date: 2025-11-20
Manufacturer Name: KTM North America, Inc.
Vehicle Make: HUSQVARNA
Vehicle Model: 701 SUPERMOTO
Model Year: 2023
Summary
Fuel tank is visibly swollen and the plastic shrouds around the fuel tank are buldging and no longer fit properly. This is a documented issue with these bikes and a local dealer i brought the bike to said husqvarna would not warranty the tank.
Read More...NHTSA ID Number: 11720429
Complaint Date: 2026-02-25
Fail Date: 2026-01-09
Manufacturer Name: Nissan North America, Inc.
Vehicle Make: NISSAN
Vehicle Model: PATHFINDER
Model Year: 2025
Summary
I am writing to formally report a serious and ongoing safety concern regarding my Nissan Pathfinder. During the initial test drive, conducted on a particularly windy day, I noticed sharp and sudden pulling to both the left and right while traveling at freeway speeds. At the time, I attributed much of this instability to the wind conditions and proceeded with the purchase. However, since taking ownership of the vehicle, the problem has persisted under normal driving conditions. While traveling on the freeway, the vehicle will unpredictably and forcefully pull to either side without warning. This repeated and erratic movement creates a legitimate fear that the vehicle could sideswipe another car, resulting in a serious accident. This is not a minor steering issue — it is a dangerous driving condition that compromises the safety of myself, my passengers, and other motorists. I reported this unsafe driving behavior to the service department at Kendall Nissan. The service manager acknowledged that similar complaints have been reported on several other vehicles they have serviced and attributed the issue to the tires. My vehicle is equipped with Bridgestone Alenza Sport AS 255/50R20 105H tires. In an effort to confirm or eliminate the tires as the cause, I requested that they be replaced. That request was denied, and I was directed to contact Nissan Customer Care. I contacted Nissan Customer Care on two separate occasions seeking resolution. My initial complaint was dismissed. After clearly stating that we felt highly unsafe operating the vehicle, I was informed that a buyback request would be submitted. Later, I was contacted and told the buyback request had been denied. Instead, I was offered reimbursement equivalent to one monthly payment — an offer that does not address or correct the underlying safety defect. Given that the dealership has acknowledged similar incidents with multiple vehicles, this appears to be a broader and potentially significant safety issue t
Read More...NHTSA ID Number: 11720428
Complaint Date: 2026-02-25
Fail Date: 2025-11-24
Manufacturer Name: Chrysler (FCA US, LLC)
Vehicle Make: RAM
Vehicle Model: 1500
Model Year: 2025
Summary
There have been systemic cylinder misfires (each cylinder), anomalous electrical architecture behavior, and transmission calibration irregularities. The check engine light indicated multiple cylinder misfires, which I understand from the dealer is a common issue with the 2025 model. As the driver, there are a few major issues: Chassis Vibration-pronounced shaking or shuddering transmitted through the steering wheel and seat, particularly during the first engine start of the day or idling. Idle Instability-An erratic or surging idle, where the tachometer needle fluctuates noticeably without any throttle input. Throttle Hesitation-A distinct stumble, lethargy, or loss of power when attempting to accelerate from a stop or while merging. It also requires more energy to accelerate, and stops faster. This problem has been addressed at three (3) CDJR dealerships now, and is still ongoing. The car only has 26k miles on it.
Read More...
- CEL Doctor: The ANCEL AD310 is one of the best-selling OBD II scanners on the market and is recommended by Scotty Kilmer, a YouTuber and auto mechanic. It can easily determine the cause of the check engine light coming on. After repairing the vehicle's problems, it can quickly read and clear diagnostic trouble codes of emission system, read live data & hard memory data, view freeze frame, I/M monitor readiness and collect vehicle information.
- Sturdy and Compact: Equipped with a 2.5 foot cable made of very thick, flexible insulation. It is important to have a sturdy scanner as it can easily fall to the ground when working in a car. The AD310 OBD2 scanner is a well-constructed mechanic tool with a sleek design. It weighs 12 ounces and measures 8.9 x 6.9 x 1.4 inches. Thanks to its compact design and light weight, transporting the device is not a problem. The buttons are clearly labelled and the screen is large and displays results clearly.
- Accurate Fast and Easy to Use: The AD310 scanner can help you or your mechanic understand if your car is in good condition, provides exceptionally accurate and fast results, reads and clears engine trouble emission codes in seconds after you fixed the problem. This device will let you know immediately and fix the problem right away without any car knowledge. No need for batteries or a charger, get power directly from the OBDII Data Link Connector in your vehicle.
- OBDII Protocols and Car Compatibility: Many cheap scan tools do not really support all OBD2 protocols. AD310 scanner as it can support all OBDII protocols such as KWP2000, J1850 VPW, ISO9141, J1850 PWM and CAN. This device also has extensive vehicle compatibility with 1996 US-based, 2000 EU-based and Asian cars, light trucks, SUVs, as well as newer OBD2 and CAN vehicles both domestic and foreign. Pls confirm with our customer service whether it is compatible with your vehicle before purchasing.
- Home Necessity and Worthy to Own: This is an excellent code reader to travel or home with as it weighs less and it is compact in design. You can easily slide it in your backpack as you head to the garage, or put it on the dashboard, this will be a great fit for you. The AD310 is not only portable, but also accurate and fast in performance. Moreover, it covers various car brands and is suitable for people who just need a code reader to check their car.
- Multi-Functions - Practical Multi-Functions OBD2 code reader features built-in OBD2 DTC lookup library, which help you to determine the cause of the engine light, read code, erase code, view freeze frame, I/M ready, vehicle information, data flow, real-time curve, get vehicle speed information, calculate load value, engine coolant temperature, get engine speed.
- Wide Capability - Supports 9 protocols compatible with most 1996 US-Based, 2000 EU-Based and Asian cars, and newer OBD II & CAN domestic or import vehicles. Supports 6 languages - English,German, Dutch, Spanish, French, Italian.
- 2.8" LCD Display - Designed with a clear display 2.8" Large LCD screen - white backlight and contrast adjustment. No need any battery or charger, OBD reader gets the power directly from your vehicle through the OBDII Data Link Connector.
- Compact Design - Car diagnostic scanner is equipped with a 2.5 feet long cable and made of a very thick flexible insulator.There are 6 buttons on OBD2 Scanner:scroll up/down,enter/exit and buttons that quick query VIN vehicle number& the DTC fault code.
- ABS / Airbag codes NOT Supported - It is able to read and clear check engine information which is part of OBDII system, but it cannot work with non-OBDII systems, including ABS / Airbag / Oil Service Light, etc.
- 【Your Personal CEL Doctor – Read & Clear Engine Codes】The NT301 OBD2 scanner lets you read diagnostic trouble codes (DTCs), check em-issions readiness, turn off your Check Engine Light (CEL) or MIL, reset monitors, and view live data streams. It retrieves your vehicle's VIN instantly. Like all standard OBD2 scanners, it clears codes only after repairs are completed—if the issue persists, the code will return. Designed for DIYers who want to understand what’s really going on under the hood.
- 【Easy Code Reading – Just Plug & Play】Simply plug into the OBD2 port, turn the ignition to “ON” (engine off), and select the correct menu: Select OBDII-> Wait for seconds-> Select Read codes. For accurate results, ensure your vehicle is compatible and the OBD2 port is free from damage or wiring issues. No batteries needed— powered directly by your car.
- 【Live Data Graphing & Accuracy for Most OBD2 Vehicles】View and log live sensor data in graph form—monitor oxygen sensors, fuel trims, coolant temp, RPM, and more. Spot trends and suspicious values in real time. Compatible with most 1996+ gasoline cars, light trucks, and SUVs sold in the U.S., as well as many 2000+ European and Asian models. Also works on 12V diesel vehicles equipped with OBD2.
- 【S-mog Check Helper – Know Your Readiness Status at a Glance】With dedicated I/M readiness hotkeys and a simple Red-Yellow-Green LED indicator, you’ll instantly know if your vehicle is ready for em-issions testing. Built-in speaker provides audio feedback. No guesswork—just confidence before you head to the test center.
- 【A Must-Have Tool for Every Home Mechanic】Compact, rugged, and ready to use right out of the box. The 2.8” color screen is easy to read, even in daylight. No charging or setup required—just plug into the 16-pin DLC and start diagnosing. Recommended by professional mechanics on YouTube and trusted by DIYers worldwide.
Last update on 2026-03-23 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.