NHTSA ID Number: 11720447
Complaint Date: 2026-02-25
Fail Date: 2026-02-24
Manufacturer Name: Chrysler (FCA US, LLC)
Vehicle Make: RAM
Vehicle Model: 2500
Model Year: 2018
Summary
The brake system malfunctioned. After applying the brakes, instead of slowly stopping, the truck began to slide. The truck has a factory recall that RAM doesn't have a fix for. Our truck has a light that says our ABS needs servicing. This has been on for several months. We took it to the dealer but they said they can't fix it because RAM doesn't have a fix for it. This is truly unacceptable. Next time it could cause an accident. The traction control light also comes on and goes off.
Read More...NHTSA ID Number: 11720446
Complaint Date: 2026-02-25
Fail Date: 2026-02-24
Manufacturer Name: Kia America, Inc.
Vehicle Make: KIA
Vehicle Model: EV6
Model Year: 2025
Summary
The ICCU unit failed. Limited speed and no charging capabilities. The Dealer has been informed and an appointment has been made 3 weeks out as they are too busy. The ICCU has not been inspected yet. No warning lamps or messages appeared before the problem started. After a loud POP or bang in the rear of the car 1 warning light appeared and 1 message. (See Attached) POP happened at 16:15 hrs on the attached graph.
Read More...NHTSA ID Number: 11720445
Complaint Date: 2026-02-25
Fail Date: 2025-09-15
Manufacturer Name: General Motors, LLC
Vehicle Make: GMC
Vehicle Model: CANYON
Model Year: 2017
Summary
The contact owns a 2017 GMC Canyon. The contact stated that while operating the vehicle, the ABS and traction control warning lights illuminated, and the message " Check Trailer Brakes” was displayed. While driving at an undisclosed speed, the braking system randomly activated, causing the vehicle to abruptly decelerate. On several occasions while depressing the brake pedal, the vehicle failed to immediately stop, causing the braking distance to be extended by approximately 8 feet. The vehicle was taken to the local dealer, who diagnosed the vehicle and determined that the ABS module was faulty and needed to be replaced. The vehicle was not yet repaired. The failure mileage was 85,000.
Read More...NHTSA ID Number: 11720444
Complaint Date: 2026-02-25
Fail Date: 2026-02-23
Manufacturer Name: Ford Motor Company
Vehicle Make: FORD
Vehicle Model: ESCAPE
Model Year: 2018
Summary
The contact owned a 2018 Ford Escape. The contact stated that while driving at an undisclosed speed, the contact noticed flames coming from the hood of the vehicle. The vehicle was parked, and the contact and the passenger exited the vehicle. The contact stated that the contact's mother was an additional occupant in the vehicle and was seated in the rear seat. The contact and the contact's mother exited the vehicle. The contact stated that within seconds, the entire vehicle was engulfed in flames. In addition, the contact stated that no warning lights were illuminated prior to the failure. The vehicle was towed to a local tow yard. No injuries were sustained. The contact stated that the vehicle had not been inspected. The manufacturer was made aware of the failure. The contact was informed that the VIN had no recalls associated with the VIN. The failure mileage was approximately 98,000.
Read More...NHTSA ID Number: 11720443
Complaint Date: 2026-02-25
Fail Date: 2025-12-25
Manufacturer Name: Nissan North America, Inc.
Vehicle Make: NISSAN
Vehicle Model: XTERRA
Model Year: 2005
Summary
The contact owns a 2005 Nissan Xterra. The contact stated that while driving at various speeds, the vehicle stalled inadvertently on several occasions. The contact was able to pull over to the side of the road on several occasions. There was no warning light illuminated. The vehicle was restarted, and the contact continued driving. The vehicle was taken to an independent mechanic, where it was diagnosed and determined that the Intelligent Power Distribution Module (IPDM) needed to be replaced. The vehicle was not repaired. The contact related the failure to NHTSA Campaign Number: 10V517000 (Engine and Engine Cooling); however, the VIN was not included. The dealer and the manufacturer were not contacted. The failure mileage was approximately 130,000.
Read More...NHTSA ID Number: 11720442
Complaint Date: 2026-02-25
Fail Date: 2026-02-16
Manufacturer Name: Toyota Motor Corporation
Vehicle Make: TOYOTA
Vehicle Model: HIGHLANDER
Model Year: 2018
Summary
The contact owns a 2018 Toyota Highlander. The contact stated that while driving at an undisclosed speed, the vehicle made grinding sounds while accelerating. Additionally, the vehicle jerked while shifting into gear. The vehicle was taken to the dealer, who determined that the transmission fluid was dirty and that the transmission assembly and torque converter needed to be replaced. The vehicle was not repaired. The manufacturer was made aware of the failure. The failure mileage was approximately 107,700.
Read More...NHTSA ID Number: 11720441
Complaint Date: 2026-02-25
Fail Date: 2026-02-14
Manufacturer Name: Chrysler (FCA US, LLC)
Vehicle Make: RAM
Vehicle Model: 1500
Model Year: 2020
Summary
The contact owns a 2020 Ram 1500. When the vehicle was purchased, the contact was informed that the vehicle was repaired under NHTSA Campaign Number: 22V904000 (STRUCTURE); however, the failure persisted. The contact stated that the tailgate failed to release as intended. The tailgate failed to open. No warning lights were illuminated. The vehicle was taken to the dealer; however, the vehicle was not inspected or diagnosed. The vehicle was not repaired. The contact stated that the failure persisted. The manufacturer was not notified of the failure. The failure mileage was unknown.
Read More...NHTSA ID Number: 11720440
Complaint Date: 2026-02-25
Fail Date: 2024-05-27
Manufacturer Name: Chrysler (FCA US, LLC)
Vehicle Make: RAM
Vehicle Model: 2500
Model Year: 2018
Summary
The contact owns a 2018 Ram 2500. The contact stated that while driving at an undisclosed speed, the traction control and the 4WD features were inoperable. The contact received notification of NHTSA Campaign Number: 24V896000 (SERVICE BRAKES, HYDRAULIC); however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The failure mileage was 120,000.
Read More...NHTSA ID Number: 11720439
Complaint Date: 2026-02-25
Fail Date: 2026-02-18
Manufacturer Name: Hyundai Motor America
Vehicle Make: HYUNDAI
Vehicle Model: SONATA
Model Year: 2020
Summary
I have had my car since January of 2023 and I have had no significant issues. I bought the car with roughly 30,000 miles, fast forward to February of 2026 it has about 123,000 miles and the engine is burning oil very fast. My car loses oil so fast the oil light comes on way early before my next oil change is due.
Read More...NHTSA ID Number: 11720438
Complaint Date: 2026-02-25
Fail Date: 2025-05-27
Manufacturer Name: Tesla, Inc.
Vehicle Make: TESLA
Vehicle Model: MODEL 3
Model Year: 2024
Summary
The Michelin tires used for this particular model have a foam issue. This foam is put by Michelin to reduce road Noice and they are coming apart thus creating a rattle in the car making it a hazard while driving on the highway. Tesla replaced one of my tires on May 27, 2025 free of charge and told me it was a known issue. Today 2/25/26 I have the same issue and they're quoting me almost $400. I told them about the tire issue and why there's no recall and they told me to contact NHTSA. They just want to change them one at a time until warranty expires so they don't have to replace all defective tires. I guess they're waiting for somebody to have an accident and sue them to fix the problem.
Read More...
- CEL Doctor: The ANCEL AD310 is one of the best-selling OBD II scanners on the market and is recommended by Scotty Kilmer, a YouTuber and auto mechanic. It can easily determine the cause of the check engine light coming on. After repairing the vehicle's problems, it can quickly read and clear diagnostic trouble codes of emission system, read live data & hard memory data, view freeze frame, I/M monitor readiness and collect vehicle information.
- Sturdy and Compact: Equipped with a 2.5 foot cable made of very thick, flexible insulation. It is important to have a sturdy scanner as it can easily fall to the ground when working in a car. The AD310 OBD2 scanner is a well-constructed mechanic tool with a sleek design. It weighs 12 ounces and measures 8.9 x 6.9 x 1.4 inches. Thanks to its compact design and light weight, transporting the device is not a problem. The buttons are clearly labelled and the screen is large and displays results clearly.
- Accurate Fast and Easy to Use: The AD310 scanner can help you or your mechanic understand if your car is in good condition, provides exceptionally accurate and fast results, reads and clears engine trouble emission codes in seconds after you fixed the problem. This device will let you know immediately and fix the problem right away without any car knowledge. No need for batteries or a charger, get power directly from the OBDII Data Link Connector in your vehicle.
- OBDII Protocols and Car Compatibility: Many cheap scan tools do not really support all OBD2 protocols. AD310 scanner as it can support all OBDII protocols such as KWP2000, J1850 VPW, ISO9141, J1850 PWM and CAN. This device also has extensive vehicle compatibility with 1996 US-based, 2000 EU-based and Asian cars, light trucks, SUVs, as well as newer OBD2 and CAN vehicles both domestic and foreign. Pls confirm with our customer service whether it is compatible with your vehicle before purchasing.
- Home Necessity and Worthy to Own: This is an excellent code reader to travel or home with as it weighs less and it is compact in design. You can easily slide it in your backpack as you head to the garage, or put it on the dashboard, this will be a great fit for you. The AD310 is not only portable, but also accurate and fast in performance. Moreover, it covers various car brands and is suitable for people who just need a code reader to check their car.
- Multi-Functions - Practical Multi-Functions OBD2 code reader features built-in OBD2 DTC lookup library, which help you to determine the cause of the engine light, read code, erase code, view freeze frame, I/M ready, vehicle information, data flow, real-time curve, get vehicle speed information, calculate load value, engine coolant temperature, get engine speed.
- Wide Capability - Supports 9 protocols compatible with most 1996 US-Based, 2000 EU-Based and Asian cars, and newer OBD II & CAN domestic or import vehicles. Supports 6 languages - English,German, Dutch, Spanish, French, Italian.
- 2.8" LCD Display - Designed with a clear display 2.8" Large LCD screen - white backlight and contrast adjustment. No need any battery or charger, OBD reader gets the power directly from your vehicle through the OBDII Data Link Connector.
- Compact Design - Car diagnostic scanner is equipped with a 2.5 feet long cable and made of a very thick flexible insulator.There are 6 buttons on OBD2 Scanner:scroll up/down,enter/exit and buttons that quick query VIN vehicle number& the DTC fault code.
- ABS / Airbag codes NOT Supported - It is able to read and clear check engine information which is part of OBDII system, but it cannot work with non-OBDII systems, including ABS / Airbag / Oil Service Light, etc.
- 【Your Personal CEL Doctor – Read & Clear Engine Codes】The NT301 OBD2 scanner lets you read diagnostic trouble codes (DTCs), check em-issions readiness, turn off your Check Engine Light (CEL) or MIL, reset monitors, and view live data streams. It retrieves your vehicle's VIN instantly. Like all standard OBD2 scanners, it clears codes only after repairs are completed—if the issue persists, the code will return. Designed for DIYers who want to understand what’s really going on under the hood.
- 【Easy Code Reading – Just Plug & Play】Simply plug into the OBD2 port, turn the ignition to “ON” (engine off), and select the correct menu: Select OBDII-> Wait for seconds-> Select Read codes. For accurate results, ensure your vehicle is compatible and the OBD2 port is free from damage or wiring issues. No batteries needed— powered directly by your car.
- 【Live Data Graphing & Accuracy for Most OBD2 Vehicles】View and log live sensor data in graph form—monitor oxygen sensors, fuel trims, coolant temp, RPM, and more. Spot trends and suspicious values in real time. Compatible with most 1996+ gasoline cars, light trucks, and SUVs sold in the U.S., as well as many 2000+ European and Asian models. Also works on 12V diesel vehicles equipped with OBD2.
- 【S-mog Check Helper – Know Your Readiness Status at a Glance】With dedicated I/M readiness hotkeys and a simple Red-Yellow-Green LED indicator, you’ll instantly know if your vehicle is ready for em-issions testing. Built-in speaker provides audio feedback. No guesswork—just confidence before you head to the test center.
- 【A Must-Have Tool for Every Home Mechanic】Compact, rugged, and ready to use right out of the box. The 2.8” color screen is easy to read, even in daylight. No charging or setup required—just plug into the 16-pin DLC and start diagnosing. Recommended by professional mechanics on YouTube and trusted by DIYers worldwide.
Last update on 2026-03-23 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.